Summary:
These came in the original DrvAPI commits in 2014, and are obsoleted by
bpf_mtap_if() and ether_bpf_mtap_if(). The `_if` suffix, rather than
prefix, conveys that it's operating on the bpf of the interface, instead
than the interface itself.
Reviewed by: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D41146
It was observed that on RockPro64 hardware, the dwc interface is unable
to receive packets after being assigned a new MAC address. The fix is
simply to call mii_mediachg() before touching any device registers in
dwc_init_locked(). This is consistent with what the OpenBSD driver does.
PR: 263820
MFC after: 1 week
We already increment the unicast IPACKETS and OPACKETS counters in the
rx/tx paths, respectively. Multicast packets are counted in the generic
ethernet code. Therefore, we shouldn't increment these counters in
dwc_harvest_stats().
Drop the early return from dwc_rxfinish_one() so that we still count
received packets with e.g. a checksum error.
PR: 263817
Reported by: Jiahao LI <jiahali@blackberry.com>
Reviewed by: manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35499
We claim support in ifcaps, but don't actually enable it.
PR: 263886
Reviewed by: manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35498
It can be useful for testing.
Reviewed by: manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35496
And if_t rather than struct ifnet *. No functional change intended.
Reviewed by: manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35497
Some board use dwc phy in MII mode, so do not fail to attach if this is
the case.
Only rockchip code uses the phy mode to program some custom syscon register.
PR: 260848
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33820
Original if_dwc driver used m_defrag as an implementation shortcut but on
1000Mb networks it affects performance. Implement multi-descriptor support for
TX path.
Tested on RK3399-Firefly, patch adds ~15% of network throughput.
Reviewed By: manu
Differential Revision: https://reviews.freebsd.org/D27520
DTS node can have this property which configure the burst length
for both TX and RX if it's the same.
This unbreak if_dwc on Allwinner A20 and possibly other boards that
uses this prop.
Reported by: qroxana <qroxana@mail.ru>
Do not hardcode what we setup for the DMA engine configuration but
lookup the fdt properties and configuring accordingly.
Use a default value of 8 for the burst dma length for both TX and
RX, this is what we used for TX before.
- Do not rely on U-Boot for clocks configuration, enable and set frequencies
in the driver's attach method.
- Adjust MAC settings according to detected linespeed on RK3399 and RK3328.
- Add support for RMII PHY mode on RK3328.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26006
- refactorize packet receive path. Make sure that we don't leak mbufs
and/or that we don't create holes in RX descriptor ring
- slightly simplify handling with TX descriptors
MFC after: 4 weeks
By using DWC TRM terminology, normal descriptor format should be named
extended and alternate descriptor format should be named normal.
Should not been functional change.
MFC after: 4 weeks
Use naming nomenclature used in DesignWare TRM.
This driver was written by using Altera (now Intel) documentation for Arria
FPGA manual. Unfortunately this manual used very different (and in some cases
opposite naming) for registers and descriptor fields. Unfortunately,
this makes future expansion extremely hard.
Should not been functional change.
MFC after: 4 weeks
On rockchip board it seems that the value in the DTS
are not enough for reseting the chip, I don't know if
the value are really incorrect or if DELAY is not precise
enough or if the rockchip gpio driver have some "lag" of some
kind or not.
For now just add more delay.
In some cases, the driver must handle given properties located in
specific OF subnode. Instead of creating duplicate set of function, add
'node' as argument to existing functions, defaulting it to device OF node.
MFC after: 3 weeks
For DWC_GMAC_ALT_DESC implementations, the multicast hash table has only
64 entries. Instead of 8 registers starting at 0x500, a pair of registers
at 0x08 and 0x0c are used instead.
Approved by: re (hrs)
Submitted by: Guy Yur <guyyur@gmail.com>
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.
Discussed in: freebsd-current
This also adds a newbus interface that allows a SoC to override the
following settings:
- if_dwc specific SoC initialization;
- if_dwc descriptor type;
- if_dwc MII clock.
This seems to be an old version of the hardware descriptors but it is
still in use in a few SoCs (namely Allwinner A20 and Amlogic at least).
Tested on Cubieboard2 and Banana pi.
Tested for regressions on Altera Cyclone by br@ (old version).
Obtained from: NetBSD
