The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The event channel source code or equivalent is needed on all
architectures. Since much of this is viable to share, get this moved out
of x86-land. Each interrupt interface then needs a distinct back-end
implementation.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2014-01-13 17:41:04
Differential Revision: https://reviews.freebsd.org/D30236
Simply moving the interrupt allocation and release functions into files
which belong to the architecture. Since x86 interrupt handling is quite
distinct from other architectures, this is a crucial necessary step.
Identifying the border between x86 and architecture-independent is
actually quite tricky. Similarly, getting the prototypes for the
border right is also quite tricky.
Inspired by the work of Julien Grall <julien@xen.org>,
2015-10-20 09:14:56, but heavily adjusted.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30936
The x86 PIC interface is very much x86-specific and not used by other
architectures. Since most of xen_intr.c can be shared with other
architectures, the PIC interface needs to be broken off.
Introduce wrappers for calls into the architecture-dependent interrupt
layer. All architectures need roughly the same functionality, but the
interface is slightly different between architectures. Due to the
wrappers being so thin, all of them are implemented as inline in
arch-intr.h.
The original implementation was done by Julien Grall in 2015, but this
has required major updating.
Removal of PVHv1 meant substantial portions disappeared. The original
implementation took care of moving interrupt allocation to
xen_arch_intr.c, but this has required massive rework and was broken
off.
In the original implementation the wrappers were normal functions. Some
had empty stubs in xen_intr.c and were removed.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2015-10-20 09:14:56
Differential Revision: https://reviews.freebsd.org/D30909
The evtchn_type enum is only touched by the Xen interrupt code. Other
event channel uses no longer need the value, so that has been moved to
restrict its use.
Copyright note. The current evtchn_type was introduced at 76acc41fb7
by Justin T. Gibbs. This in turn appears to have been heavily inspired
by 30d1eefe39 done by Kip Macy.
Reviewed by: royger
Move the xenisrc structure which needs to be shared between the core Xen
interrupt code and architecture-dependent code into a separate header. A
similar situation exists for the NR_EVENT_CHANNELS constant.
Turn xi_intsrc into a type definition named xi_arch to reflect the new
purpose of being an architectural variable for the interrupt source.
This was originally implemented by Julien Grall, but has been heavily
modified. The core side was renamed "intr-internal.h" and is #include'd
by "arch-intr.h" instead of the other way around. This allows the
architecture to add function definitions which use struct xenisrc.
The original version only moved xi_intsrc into xen_arch_isrc_t. Moving
xi_vector was done by the submitter.
The submitter had also moved xi_activehi and xi_edgetrigger into
xen_arch_isrc_t. Those disappeared with the removal of PVHv1 support.
Copyright note. The current xenisrc structure was introduced at
76acc41fb7 by Justin T. Gibbs. Traces remain, but the strength of
Copyright claims from before 2013 seem pretty weak.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>, 2021-03-17 19:09:01
Original implementation: Julien Grall <julien@xen.org>, 2015-10-20 09:14:56
Differential Revision: https://reviews.freebsd.org/D30648
[royger]
- Adjust some line lengths
- Fix comment about NR_EVENT_CHANNELS after movement.
- Use #include instead of symlinks.
xen_intr_handle_upcall() has two interfaces. It needs to be called by
the x86 assembly code invoked by the APIC. Second, it needs to be called
as a driver_filter_t for the XenPCI code and for architectures besides
x86.
Unfortunately the driver_filter_t interface was implemented as a wrapper
around the x86-APIC interface. Now create a simple wrapper for the
x86-APIC code, which calls an architecture-independent
xen_intr_handle_upcall().
When called via intr_event_handle(), driver_filter_t functions expect
preemption to be disabled. This removes the need for
critical_enter()/critical_exit() when called this way.
The lapic_eoi() call is only needed on x86 in some cases when invoked
directly as an APIC vector handler.
Additionally driver_filter_t functions have no need to handle interrupt
counters. The intrcnt_add() calling function was reworked to match the
current situation. intrcnt_add() is now only called via one path.
The increment/decrement of curthread->td_intr_nesting_level had
previously been left out. Appears this was mostly harmless, but this
was noticed during implementation and has been added.
CONFIG_X86 is a leftover from use with Linux. While the barrier isn't
needed for FreeBSD on x86, it will be needed for FreeBSD on other
architectures.
Copyright note. xen_intr_intrcnt_add() was introduced at 76acc41fb7
by Justin T. Gibbs. xen_intrcnt_init() was introduced at fd036deac1
by John Baldwin.
sys/x86/xen/xen_arch_intr.c was originally created by Julien Grall in
2015 for the purpose of holding the x86 interrupt interface. Later it
was found xen_intr_handle_upcall() was better earlier, and the x86
interrupt interface better later. As such the filename and header list
belong to Julien Grall, but what those were created for is later.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30006
Part of the series for allowing FreeBSD/ARM to run on Xen. On ARM the
function is a trivial pass-through, other architectures need distinct
implementations.
While implementing XEN_VCPUID() as a call to XEN_CPUID_TO_VCPUID()
works, that involves multiple accesses to the PCPU region. As such make
this a distinct macro. Only callers in machine independent code have
been switched.
Add a wrapper for the x86 PIC interface to use matching the old
prototype.
Partially inspired by the work of Julien Grall <julien@xen.org>,
2015-08-01 09:45:06, but XEN_VCPUID() was redone by Elliott Mitchell on
2022-06-13 12:51:57.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2014-04-19 08:57:40
Original implementation: Julien Grall <julien@xen.org>, 2014-04-19 14:32:01
Differential Revision: https://reviews.freebsd.org/D29404
Now that the atomic macros are always genuinely atomic on x86, they can
be used for synchronization with Xen. A single core VM isn't too
unusual, but actual single core hardware is uncommon.
Replace an open-coding of evtchn_clear_port() with the inline.
Substantially inspired by work done by Julien Grall <julien@xen.org>,
2014-01-13 17:40:58.
Reviewed by: royger
MFC after: 1 week
This is required for a further change that will make use of a field
that was added in version 0x00040d00.
No functional change expected.
Sponsored by: Citrix Systems R&D
Current Xen Processor driver will evaluate any Processor object on the
ACPI tables regardless of whether the processor is online or not.
Avoid doing so for processors that are not online, as evaluating
methods of processors that are not online could lead to accesses to
invalid memory, and in any case the data that the driver fetches from
the Processor ACPI object only makes sense for processors that are
online.
Note the CPU related data fetched from Xen using XENPF_get_cpuinfo
hypercall could be cached, I leave that as a future optimization.
Sponsored by: Citrix Systems R&D
Fixes: b93f47eaee ('xen/acpi: upload Cx and Px data to Xen')
There's been a report recently of mbufs with data that crosses a page
boundary. It seems those mbufs are generated by the iSCSI target
system:
https://lists.xenproject.org/archives/html/xen-devel/2021-12/msg01581.html
In order to handle those mbufs correctly on netfront use the bus_dma
interface and explicitly request that segments must not cross a page
boundary. No other requirements are necessary, so it's expected that
bus_dma won't need to bounce the data and hence it shouldn't
introduce a too big performance penalty.
Using bus_dma requires some changes to netfront, mainly in order to
accommodate for the fact that now ring slots no longer have a 1:1
match with mbufs, as a single mbuf can use two ring slots if the data
buffer crosses a page boundary. Store the first packet of the mbuf
chain in every ring slot that's used, and use a mbuf tag in order to
store the bus_dma related structures and a refcount to keep track of
the pending slots before the mbuf chain can be freed.
Reported by: G.R.
Tested by: G.R.
MFC: 1 week
Differential revision: https://reviews.freebsd.org/D33876
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
With clang 15, the following -Werror warnings are produced:
sys/dev/xen/control/control.c:188:15: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
xctrl_poweroff()
^
void
sys/dev/xen/control/control.c:194:13: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
xctrl_reboot()
^
void
sys/dev/xen/control/control.c:207:14: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
xctrl_suspend()
^
void
sys/dev/xen/control/control.c:344:12: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
xctrl_crash()
^
void
This is because xctrl_poweroff(), xctrl_reboot(), xctrl_suspend(), and
xctrl_crash() are declared with (void) argument lists, but defined with
empty argument lists. Make the definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/xen/blkback/blkback.c:1561:12: error: variable 'req_seg_idx' set but not used [-Werror,-Wunused-but-set-variable]
u_int req_seg_idx;
^
The 'req_seg_idx' variable was used in the for loop later in the
xbb_dispatch_io() function, but refactoring in 112cacaee4 got rid of
it. Remove the variable since it no longer serves any purpose.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/xen/blkfront/blkfront.c:602:6: error: variable 'sbp' set but not used [-Werror,-Wunused-but-set-variable]
int sbp;
^
The 'sbp' variable was used in the for loop later in the xb_dump()
function, but refactoring in e4808c4b2d got rid of it. Remove the
variable since it no longer serves any purpose.
MFC after: 3 days
Remove bounce buffering code for blkback and only attach if Xen
creates IOMMU entries for grant mapped pages.
Such bounce buffering consumed a non trivial amount of memory and CPU
resources to do the memory copy, when it's been a long time since Xen
has been creating IOMMU entries for grant maps.
Refuse to attach blkback if Xen doesn't advertise that IOMMU entries
are created for grant maps.
Sponsored by: Citrix Systems R&D
Handle tearing down a blkback that hasn't been fully initialized. This
requires carefully checking that fields are allocated before trying to
access them. Also communication memory is allocated before setting
XBBF_RING_CONNECTED, so gating it's freeing on XBBF_RING_CONNECTED
being set is wrong and will lead to memory leaks.
Also stop using xbb_disconnect() in error paths. Use xenbus_dev_fatal
and let the normal disconnection procedure take care of the cleanup.
Reported by: Ze Dupsys <zedupsys@gmail.com>
Sponsored by: Citrix Systems R&D
The physical address argument is essentially ignored by every dumper
method. In addition, the dump routines don't actually pass a real
address; every call to dump_append() passes a value of zero for
physical.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35173
While here, use driver->name instead of hardcoding the xenpv and
xen_et strings both for devclass_find() and BUS_ADD_CHILD().
Reviewed by: Elliott Mitchell <ehem+freebsd@m5p.com>, imp, royger
Differential Revision: https://reviews.freebsd.org/D35001
When FreeBSD is running as dom0 (initial domain) on a Xen system it
has access to the native ACPI tables and is the OSPM. However the
hypervisor is the entity in charge of the CPU idle and frequency
states, and in order to perform this duty it requires information
found the ACPI dynamic tables that can only be parsed by the OSPM.
Introduce a new Xen specific ACPI driver to fetch the Processor
related information and upload it to Xen. Note that this driver needs
to take precedence over the generic ACPI CPU driver when running as
dom0, so downgrade the probe score of the native driver to
BUS_PROBE_DEFAULT in order for the Xen specific driver to use
BUS_PROBE_SPECIFIC.
Tested on an Intel NUC to successfully parse and upload both the Cx and
Px states to Xen.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb kib
Differential revision: https://reviews.freebsd.org/D34841
These headers originate with the Xen project and shouldn't be mixed with
the main portion of the FreeBSD kernel. Notably they shouldn't be the
target of clean-up commits.
Switch to use the headers in sys/contrib/xen.
Reviewed by: royger
There's no need to explicitly add linear mappings for the grant table
area, as the memory is allocated using xenmem_alloc and it should
already have a linear mapping that can be obtained using
rman_get_virtual.
While there also remove the return value of gnttab_map, since there's
no return value anymore.
Sponsored by: Citrix Systems R&D
Reviewed by: Elliott Mitchell <ehem+freebsd@m5p.com>
Differential revision: https://reviews.freebsd.org/D29602
When running as a Xen guest it's easier to use an hypercall in order
to do power management operations (power off, power cycle). Do this
for all supported guest types (HVM and PVH). Note that for HVM the
power operation could also be done using ACPI, but there's no reason
to differentiate between PVH and HVM.
While there fix the shutdown handler to properly differentiate between
power cycle and power off requests.
Reported by: Freddy DISSAUX
MFC: 1 week
Sponsored by: Citrix Systems R&D
Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlocked with bus_topo_unlock(). If you need the topology lock for
some reason, bus_topo_mtx() will provide that.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D31831
This was found while looking for driver_filter_t functions which got the
trap frame from the argument. This particular instance it isn't even
used, so remove now lest someone else get to it first.
Reviewed by: mhorne
The current definition for the MMAP_RESOURCE ioctl was wrong as it
didn't copy back the result to the caller. Fix the definition and also
remove the bogus attempt to copy the result in the implementation.
Note such copy back is only needed when querying the size of a
resource.
Sponsored by: Citrix Systems R&D
Devices in sys/dev should be architecture-independent and NOT #include
intr_machdep.h.
Reviewed by: mhorne royger
Differential Revision: https://reviews.freebsd.org/D29959
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
bus_activate_resource maps memory regions as uncacheable on x86, which
is more strict than required for regions allocated using xenmem_alloc,
so don't rely on bus_activate_resource and instead map the region
using pmap_mapdev_attr and VM_MEMATTR_XEN as the cache attribute.
Sponsored by: Citrix Systems R&D
xen_vector_callback_enabled is x86 specific and availability of
per-cpu event channel delivery differs on other architectures.
Introduce a new helper to check if there's support for per-cpu event
channel injection.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29402
Presently suspend/resume and migration aren't supported on Xen/ARM. As
such this shouldn't ever occur.
This likely applies to future Xen architectures (RISC-V) and
xctrl_suspend() needs dependency on intr_machdep.h fixed.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29599
This is no more or less than returning the smaller of two values. Since
this is what min() does, use that to shrink max_nr_grant_frames() down
to the single line.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29840
While x86 only register PV shutdown handler for PV guests. ARM guests
are always using HVM and requires the PV shutdown handler.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29406
ARM guest is considered as HVM in Freebsd but they only support PV disk
(no emulation available).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29403
ARM guest is considered as HVM but it only supports PV nics (no
emulation available).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29405