Commit Graph

29 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
b22bf66063 - Move bus dependent defines to {isa,cbus}_dmareg.h.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 10:14:56 +00:00
Yoshihiro Takahashi
24072ca35b - Move timerreg.h to <arch>/include and split i8253 specific defines into
i8253reg.h, and add some defines to control a speaker.
- Move PPI related defines from i386/isa/spkr.c into ppireg.h and use them.
- Move IO_{PPI,TIMER} defines into ppireg.h and timerreg.h respectively.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 09:10:02 +00:00
Yoshihiro Takahashi
d6c331a30d Remove unused IO_NPX* defines. 2005-05-12 12:36:31 +00:00
Peter Wemm
66d2648494 Catch up with i386 - remove lots of no longer used symbolic constants 2004-08-16 22:51:44 +00:00
Warner Losh
29ae923f44 Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core
2004-04-05 21:29:41 +00:00
Peter Wemm
afa8862328 Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from.  There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code.  pmap uses
  a variation of the PAE code in order to avoid having to worry about 4
  levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
  i386 loader.  This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
  not been translated yet, and some that I cheated and wrote dumb C
  versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
  passing, as is native on the amd64 ABI), and the 'syscall' instruction
  for syscalls.  int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
  of places (eg: to find which register they use to replace the trashed
  %rcx register in the syscall instruction).  As a result, there is not a
  lot of similarity.  I did look at NetBSD a few times while debugging to
  get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Kazutaka YOKOTA
2d15a1badc Move IO_PSMSIZE from kbdio.h to isa.h. I thought I did this a long time
ago...

While I am here, correct the values for IO_MDASIZE and IO_CGASIZE; they
should be 12 rather than 16.
1999-01-06 05:40:01 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Satoshi Asami
ad63a118b2 The Great PC98 Merge.
All new code is "#ifdef PC98"ed so this should make no difference to
PC/AT (and its clones) users.

Ok'd by:	core
Submitted by:	FreeBSD(98) development team
1996-06-14 11:02:28 +00:00
Mike Pritchard
6c5e9bbdf5 Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.
1996-01-30 23:02:38 +00:00
Bruce Evans
6eeed24248 Updated comments. The comments about the unused addresses get broken
almost every time someone uses an address.  This file is probably not
the right place to keep track of the unused addresses (or used
addresses :->).

Fixed comments on #endif's to match code.

Added defines for ASC and GSC sizes.  This file is not the right place
to keep track of scanner addresses, but while there here and we
pretend to keep track of unused addresses, the sizes need to be here
too.

Sorted IO_*SIZE defines.
1995-11-18 09:29:39 +00:00
Julian Elischer
819fb11f5e Submitted by: Luigi Rizzo (luigi@iet.unipi.it)
Obtained from: Luigi Rizzo and Gunther Schadow
Kernel support for the asc scanner driver
1995-09-08 03:14:00 +00:00
Bruce Evans
6f5014b462 Convert to ANSI C: change #endif THING to #endif /* THING */.
Fix one such THING in code to match comment.
Sort IO_GSC* into numeric order and update comments about the gaps.
Sort common SCSI addresses into alphabetical order.
Remove bogus comments about com ports having i/o size 4.
Uniformize whitespace.
Uniformize case in hex digits.

This file is very incomplete.  In particular, it doesn't mention any
network cards.  This doesn't matter much for the base addresses, but
it means that the comments about which addresses are free are mostly
bogus.  The i/o sizes are unreliable because of split address ranges
for many devices (VGA, wd).  The i/o sizes are incomplete.  In
particular, there are no sizes for SCSI controllers.  The bt driver
still returns a truth value instead of a size.
1995-06-14 07:38:31 +00:00
Poul-Henning Kamp
ca063ee672 Change EISA size to 256 instead of 4096.
Neither are correct, but 256 does least damage.
1995-02-25 20:26:14 +00:00
Jean-Marc Zucconi
3bc6bf1734 Changed address of the game controller to 0x201 (was 0x200)
joy.c: joystick driver
1995-01-25 20:11:51 +00:00
Jordan K. Hubbard
2f6df2645b Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
driver for the Genius GS-4500 hand scanner.
Submitted by:	gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00
Poul-Henning Kamp
f143db1a98 I just learned that isa.h is included in assembler files too... 1994-11-19 18:59:04 +00:00
Poul-Henning Kamp
f194376568 add
extern u_int atdevbase;       /* offset in virtual memory of ISA io mem */
here for a moment, to get it into BETA
1994-11-19 18:47:57 +00:00
Justin T. Gibbs
8c1294dcf2 IO_EISASIZE should be 1 slot, not 2. 1994-11-18 19:01:25 +00:00
Jordan K. Hubbard
d6e867f326 Get IO_EISASIZE properly defined now.
Reviewed by:
Submitted by:
Obtained from:
1994-11-18 08:22:04 +00:00
Bruce Evans
095b0028db Move declarations of atdevbase and rtcin() to cpufunc.h (a less wrong
place).

Fix spelling error.

Uniformize idempotency ifdef.
1994-11-14 14:19:10 +00:00
David Greenman
22414e535a Laptop Advanced Power Management support by HOSOKAWA Tatsumi.
Submitted by:	HOSOKAWA Tatsumi
1994-10-01 02:56:21 +00:00
Søren Schmidt
57d26a14e9 Added IO_PPI define, pulled timer related stuff 1994-04-21 14:20:54 +00:00
Rodney W. Grimes
3b6585764d Fixed comment that refered to 8252 (we really have 8253's).
Per some one on the mailing list.
1994-01-05 15:03:28 +00:00
Garrett Wollman
13c0dce671 Made all header files idempotent and moved incorrect common data from
headers into a related source file.  Also fixed a bug in ed_probe() where
it was possible to fall off the end of the function
1993-11-07 17:44:34 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00