The target modifiers (-g, -p, -u) may occur in any position except
between -n and its argument; furthermore, we support both the old
absolute form (without -n) and the modern relative form (with -n).
Sponsored by: Klara, Inc.
To simplify adding new handlers merge the common parts of the functions
used to call into the arm SMCCC firmware.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36297
When the IDC flag is set in the cache type register we don't need to
clean the data cache to the point of unification. Previously we
supported this flag being set only when the DIC flags was also set.
Add a new handler for when this is not the case.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation, Ampere (hardware)
Differential Revision: https://reviews.freebsd.org/D36296
When running under a VM we don't have access to the physical counter.
Add support to emulate this instruction by handling the trap in the
kernel. As it is slow only enable when the hw.emulate_phys_counter
tunable is set on boot.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35613
Replace the quoted printable code with one that respects RFC2045
Add tests about this parsers and encoders, using examples from the
wikipedia page.
Reviewed by: pstef
Differential Revision: https://reviews.freebsd.org/D36314
In searching for where to insert a new node, RB_INSERT discards the
address of the pointer that will have to be modified, so that it must
find it again from the values of 'parent' and 'comp'. Stop discarding
that address, and so avoid having to recompute it.
Reviewed by: alc
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D36317
Add a strverscmp(3) function to libc, a GNU extension I implemented by
reading its glibc manual page. It orders strings following a much more
natural ordering (e.g. "ent1 < ent2 < ent10" as opposed to
"ent1 < ent10 < ent2" with strcmp(3)'s lexicographic ordering).
Also add versionsort(3) for use as scandir(3)'s compar argument.
Update manual page for scandir(3) and add one for strverscmp(3).
Reviewed by: pstef, gbe, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35807
After commit 840327e5dd ("mbuf: Don't support PAGE_SIZE < 4K"), these
defaults were causing LINT kernel builds to fail.
Reported by: Jenkins
MFC after: 1 week
The new helper scandir_dirp() takes DIR *, i.e. a pre-opened directory,
instead of the directory name.
Reviewed by: emaste, imp, kevans, markj, Aymeric Wibo <obiwac@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36301
for the "trap with interrupts disabled" warning.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
Also compactify the printfs, and remove comment about 'two prints'.
Their arguments are on same page, so one fault implies another.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
It is enough to have only one 'call calltrap' locally.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
There is no reason to do this. Instead just calculate it later.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
tf_trapno is checked on return from interrupt/exception to determine if
special handling is needed for switching address space. This is due to
the possibility of NMI/MCHK/DBG to occur at arbitrary place in kernel,
where both address space and stack used could be transient. Kernel
saves current %cr3 in tf_err for such events, to restore on return.
If user is able to set tf_trapno, it can trigger that special handling,
and since tf_err is also user-controlled by sigreturn(2), the result is
undefined.
PR: 265889
Reported by: lwhsu
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
Which means that we must not copy top 8 bytes from the trampoline stack
for the exception frame to the regular thread kstack. As consequence,
this stops corruption of the pcb. The visible effect was often a broken
fork(2) on the CPU where corruption occured.
Account for the detail by substracting 8 from the copy byte count when
moving exception frames from trampoline to the regular stack.
[irettraps handles segmentation/stack/protection faults which could
occur on the doreti path, where we might already switched stack and
address space]
Reported and tested by: pho
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
Do not blindly account a page fault occuring on the trampoline area,
as the userspace access fault. Check that it occured exactly in the
instruction that does that.
This avoids unneeded switches of address space on faults not needing the
switch, effectively converting machine resets due to tripple faults,
into regular panics.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36302
When a freebsd32 caller uses all or most allowed space for control
messages (MCLBYTES == 2K) then the message may no longer fit when
the messages are padded for 64-bit alignment. Historically we've just
shrugged and said there is no ABI guarantee. We ran into this on
CheriBSD where a capsicumized 64-bit nm would fail when called with more
than 64 files.
Fix this by not gratutiously capping size of mbuf data we'll allocate
to MCLBYTES and let m_get2 allocate up to MJUMPAGESIZE (4K or larger).
Instead of hard-coding a length check, let m_get2 do it and check for a
NULL return.
Reviewed by: markj, jhb, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36322
This could only happen on systems with PAGE_SIZE < 4K and FreeBSD
doesn't support such systems.
Reviewed by: np, imp, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36321
The Vax supported such things, but FreeBSD does not. This further
implies that MJUMPAGESIZE > MCLBYTES so assert this and remove code
handling them being equal.
Reviewed by: kp, imp, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36320
Add an internal debug level global:
- Level 1 (-d) currently does nothing.
- Level 2 (-d -d) enables libfetch debugging (quite verbose) so it's
possible to see what pkg is attempting to download without having
to sniff traffic.
Reviewed by: debdrup, bapt
Differential Revision: https://reviews.freebsd.org/D35756
Summary:
Currently netinet6/ code allocates IPv6 prefixes (nd_prefix) for
both manually-assigned addresses and advertised prefixes. As a result,
prefixes from manually-assigned prefixes can be seen in `ndp -p` list
and be cleared via `ndp -P`. The latter relies on the SIOCSPFXFLUSH_IN6
ioctl to clear to prefix list.
The original intent of the SIOCSPFXFLUSH_IN6 was to clear prefixes
originated from the advertising routers:
```
1998-09-02 JINMEI, Tatuya <jinmei@isl.rdc.toshiba.co.jp>
* nd6.c (nd6_ioctl): added 2 new ioctls; SIOCSRTRFLUSH_IN6 and
SIOCSPFXFLUSH_IN6. The former is to flush all default routers
in the default router list, and the latter is to flush all the
prefixes and the addresses derived from them in the prefix list.
```
Restore the intent by marking prefixes derived from the RA messages
with newly-added ndpr_flags.ra_derived flag and skip prefixes not marked
with such flag during deletion and listing.
Differential Revision: https://reviews.freebsd.org/D36312
MFC after: 2 weeks
This is a joint work with manu.
- fixed conditions in do_i2c_transfer and i2c_transfer as linux_i2cbb
does not set adapter->algo->master_xfer but does set
adapter->algo_data;
- fixed parent bus specification for linux_i2cbb driver module;
- actually implemented iicbb_transfer method;
- added iicbb_pre_xfer and iicbb_post_xfer methods;
- removed unnecessary and harmful delays (and other extra logic) from
iicbb methods as iicbb driver already has them;
- added setting of iicbb speed based on algo_data->udelay, so that iicbb
uses correct delays;
PR: 265920
Fixes: 1961a14a47 linuxkpi: Add i2c support
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG (manu's work)
We don't use EFI_MEMORY_DESCRIPTOR that's typedef'd here. We use the one
from sys/efi.h instead. Remove the clutter here as these two are subtly
different (though wind up with the same layout due to alignment rules).
Sponsored by: Netflix
The fsck_ffs(8) utility has two subsystems for reading and writing
inodes. The getnextinode() interface is used in Pass 1 (and Pass
1b if needed) to sequentially walk through all the inodes in the
filesystem. The ginode() interface is used to read and write
individual inodes. Pass 1 uses a mix of both interfaces. This
change ensures that ginode() returns a pointer to the inode in the
cache maintained by getnextinode() when that interface holds the
requested inode so that all modifications to the inode are made in
a single place and are all written to the disk together.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Historically fsck_ffs(8) would only use alternate superblocks when
running in manual mode. When the standard superblock fails, it now
tries to find and use a backup superblocks even when running in `preen'
mode. If an alternate superblock is found and the filesystem is
successfully cleaned up using it, write the alternate superblock
back to the standard superblock so that the filesystem can be
subsequently mounted and used.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
This applies one of the changes from
5567d6b441 to other architectures
besides arm64.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36263
