Commit Graph

110 Commits

Author SHA1 Message Date
Ian Lepore
6e081f10fc Flag sysctl hw.mmc.debug as a tunable, since often you want to debug the
bus probing during system startup.
2015-12-18 01:32:43 +00:00
Ian Lepore
3f62727443 Move the DRIVER_MODULE() statements that declare mmc(4) to be a child of
the various bridge drivers out of dev/mmc.c and into the bridge drivers.

Requested by:	   jhb (almost two years ago; better late than never)
2015-12-14 01:09:25 +00:00
Andrew Turner
c0e5e17237 Add support for the DesignWare MMC hardware in the HiSilicon hi6220. This
SoC is used in the HiKey board from 96boards.

Currently on the SD card is working on the HiKey, as such devices 0 and 2
will need to be disabled, for example by adding the following to
loader.conf:

hint.hisi_dwmmc.0.disabled=1
hint.hisi_dwmmc.2.disabled=1

Relnotes:	yes (Hikey board booting)
Sponsored by:	ABT Systems Ltd
2015-09-01 16:25:12 +00:00
Andrew Turner
fa6ea9962e Finish allowing the dwmmc driver to be subclassed, move the softc to a new
header, along with the hwtype enum, device attach prototype, and driver_t.

Sponsored by:	ABT Systems Ltd
2015-09-01 15:26:21 +00:00
Andrew Turner
0e308268b0 Remove an variable we only ever write to, and stop assigning 0 to values
in the softc as it's the default value. The latter helps with subclassing
this driver.

Sponsored by:	ABT Systems Ltd
2015-09-01 10:47:42 +00:00
Andrew Turner
755eb18fd7 Move dwmmc.h to dwmmc_reg.h. This is in preperation for adding support to
subclass the dwmmc driver to allow SoC specific attachments.

Sponsored by:	ABT Systems Ltd
2015-08-28 15:27:55 +00:00
Andrew Turner
725b72d5e0 Only check for the bus frequency if it has not already been set, for
example through a driver running as a subclass of this.

Sponsored by:	ABT Systems Ltd
2015-08-28 10:34:37 +00:00
Andrew Turner
2640322a2e There is no need to get the bus tag or handle.
Sponsored by:	ABT Systems Ltd
2015-08-27 16:27:51 +00:00
Andrew Turner
fd59e3a9d8 Limit the speed to the bus frequency.
Sponsored by:	ABT Systems Ltd
2015-08-27 16:24:30 +00:00
Andrew Turner
488d593a0c Allow the fifo-depth and num-slots to be missing. For the former we read
the value from the hardware, for the latter assume a single slot.

Sponsored by:	ABT Systems Ltd
2015-08-27 16:18:22 +00:00
Andrew Turner
26f0e89a6d Allow us to select the transfer count. This allows us to work with hardware
that seems to only work with a single block at a time.

Sponsored by:	ABT Systems Ltd
2015-08-27 13:08:45 +00:00
Justin Hibbits
5d6961b0dc Fix freescale sdhc driver, and add it to the files list.
Also, add it to the mmc DRIVER_MODULE attachment list.
2015-08-27 03:47:56 +00:00
Andrew Turner
4f768055bd Only access the Samsung registers when targeting Samsung hardware.
Sponsored by:	ABT Systems Ltd
2015-08-26 10:54:14 +00:00
Andrew Turner
d1b2133d03 Attach dwmmc to the ofwbus, som devicetrees place it here.
Sponsored by:	ABT Systems Ltd
2015-08-07 08:57:58 +00:00
Andrew Turner
a336c37514 Stop including machine/fdt.h, it's unneeded, and purposefully
unimplemented on arm64.

Sponsored by:	ABT Systems Ltd
2015-08-07 08:54:50 +00:00
Ian Lepore
e7b25f9168 Deselect the sd card before re-selecting it when working around a problem
with some cards that causes them to become deselected after probing for
switch capabilities.  The old workaround fixes the behavior with some cards,
but causes problems with the cards the behave correctly and don't become
deselected.  Forcing a deselect then reselect appears to work correctly
with all cards in initial testing.
2015-07-18 16:56:51 +00:00
Marcel Moolenaar
ca4a0f7b65 Do not set d_fwsectors nor d_fwheads. Primarily because the values
tend to be invalid. On a Beaglebone Black, we get 8192 sectors per
track and that causes major breakages.

Differential Revision: D2646
Reviewed by:	ian@ imp@
2015-05-29 20:50:41 +00:00
Luiz Otavio O Souza
6a11fa4e31 Add the MMC/SD driver for Allwinner SoCs.
This is based on the patch sent by Alexander Fedorov with the following
fixes/improvements:

 - Better error handling;
 - Clock is derived from PLL6 (obtained from netbsd);
 - No more unnecessary busy loops on interrupt handler;
 - style(9) fixes and code cleanup.

I also want to thanks Martin Galvan who has sent an alternative
implementation with some interesting fixes.

Tested on CubieBoard2, Banana-Pi (thanks to netgate!) and Cubieboard1
(Pratik Singhal).

This is intended to pave the way for the upcoming GSoC work (and make
easier the build of images for the supported boards).

PR:		196081
Submitted by:	Alexander Fedorov <alexander.fedorov@rtlservice.com>
2015-05-21 17:39:42 +00:00
Warner Losh
25b2c4df89 Re-select the SD card before getting the SD status. On a couple Atmel
boards, this prevents some error messages during enumeration and also
gives us the correct erase block size. They appear to be harmless
elsewhere.

# Note: we treat too many commands as 'can't fail' if they don't work
# after a couple of retries. We need to fix that, but not today...
2015-05-19 21:16:53 +00:00
Ganbold Tsagaankhuu
562246dff8 Add necessary changes to support various Amlogic SoC devices
specially aml8726-m6 and aml8726-m8b SoC based devices.
aml8726-m6 SoC exist in devices such as Visson ATV-102.
Hardkernel ODROID-C1 board has aml8726-m8b SoC.

The following support is included:
  Basic machdep code
  SMP
  Interrupt controller
  Clock control driver (aka gate)
  Pinctrl
  Timer
  Real time clock
  UART
  GPIO
  I2C
  SD controller
  SDXC controller
  USB
  Watchdog
  Random number generator
  PLL / Clock frequency measurement
  Frame buffer

Submitted by:   John Wehle
Approved by:    stas (mentor)
2015-03-31 11:50:46 +00:00
Ian Lepore
16c413064b MMC: Signal HC capability to (e)MMC.
Summary:
For new eMMC chips, we must signal controller HC capability in OP_COND command.

Reviewers: imp, ian

Reviewed By: ian

Differential Revision: https://reviews.freebsd.org/D1920
2015-02-27 15:14:25 +00:00
Ganbold Tsagaankhuu
e2763dca83 Enable Synopsys DesignWare Mobile Storage Host Controller
driver on Rockchip boards. It currently supports PIO mode
and dma mode needs external dma controller to be used.

Submitted by:   jmcneill
Approved by:    stas (mentor)
2015-01-20 09:07:28 +00:00
Ian Lepore
5e3dbf8b9f Rate-limit error logging to 5 lines per second, so that when an sdcard
goes bad it doesn't lock up the console with continuous output.
2015-01-11 20:55:16 +00:00
Warner Losh
3e834dd35d Always select the card before we do the 4.x specific stuff and
deselect it after setting the block size. This is a similar bug that
was fixed elsewhere, but not here. This makes sure that we leave the
card deselected at the end of the loop, and we don't send any commands
to the card without it selected.

Reviewed by: ian@
2014-12-23 05:50:53 +00:00
Ian Lepore
dc47198f50 Log mmc and sd command failures. Reporting of routine expected errors,
such as timeouts while probing a bus or testing for a feature, is
squelched.  Also, error reporting is limited to 5 events per second,
because when an sdcard goes bad on a low-end embedded board, flooding
the console at high speed isn't helpful.

Original logging code contributed by Michal Meloun, but then I fancied
it up with squelching and ppsratecheck.
2014-12-20 04:24:40 +00:00
Warner Losh
b9a2a3f1cf Don't deselect the card too soon. To set the block size or switch the
function parameters, the card has to be in transfer state. If it is in
the idle state, the commands are ignored. This caused us not to set
the proper parameters that we later assume to be present, leading to
downstream failures of the card / interface as our state machine
mismatches the card's.

Submitted by: Svatopluk Kraus <onwahe at gmail.com>, Michal Meloun
<meloun at miracle.cz>
2014-12-18 16:57:22 +00:00
Warner Losh
a5928b20d5 fwsectors and fwheads used to be somehwat arbitrary. However, they are
used to align partitions in gpart. We also try to align partitions by
stripe size when creating new media. Align these two concepts by
making fwsectors the same as the stripe size. Select a sensible number
of heads so we wind up with about 20 cylinders. This number was
selected to keep the rounding effects to a few percent while keeping
the number of cylinder groups low.

Sadly, it is not possible to make these numbers match the numbers used
by SD card readers. There apperas to be much variation between brands
so there's no one universal number. These numbers are also not aligned
to the stripe size, so some performance problems may still be present
when SD cards are created this way.

Also, these numbers will differ from the far less common SD to ATA
adapters, which present a different, but more uniform, set of numbers
that also happened to match the old defaults.

Nothing should change for current users. Any suboptimal performance
caused by misalignment will still be there. gpart will honor the
partitions that aren't on proper boudnaries, but editing the partition
tables may result in different alignments being used than before when
editing things natively.

Ideally, there'd be some way to override these values in the disk
subsystem by the user for the USB adapter use case where all "native"
notions of geometry disappear. This does not implement that.
2014-10-16 19:52:12 +00:00
Ruslan Bukin
fdbf76c383 Always wait 'command done' interrupt status bit before proceeding next command.
Sponsored by:	DARPA, AFRL
2014-10-08 08:51:05 +00:00
Ruslan Bukin
41709d23c4 Add driver for Synopsys DesignWare Mobile Storage Host Controller.
Sponsored by:	DARPA, AFRL
2014-10-07 17:39:30 +00:00
Ian Lepore
f3a4b7f73b Export an mmc or sd card's serial number from the mmc layer as an ivar.
In the mmcsd layer use this value to populate disk->d_ident.  Also set
disk->d_descr to the full set of card identification info (includes vendor,
model, manufacturing date, etc).
2014-07-31 16:54:54 +00:00
Ian Lepore
c4ec9d1887 If no compatible cards were found after probing the bus, say so. 2014-02-15 20:36:54 +00:00
Ian Lepore
bcbcc48fbf Sort the list. 2014-02-03 02:56:23 +00:00
Ian Lepore
e347507d5f Add the imx sdhci controller. 2014-02-03 02:52:07 +00:00
Ian Lepore
a6e2415cc4 Don't give up so easily on failure of CMD55 to put the card into app-cmd
mode.  We don't know why it failed, so we can't know that a retry will
also fail (the low-level driver might have reset the controller state
machine or something similar that would allow a retry to work).
2013-08-23 15:07:54 +00:00
Ian Lepore
59769a581f Make the standard sdhci(4) driver work for the TI OMAP family SoCs.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.

This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.

This initial incarnation lacks DMA support (coming soon).  Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
2013-08-20 12:33:35 +00:00
Ian Lepore
ed7142a72d Consistently init all mmc request, command, and data structures to zero
before using them.
2013-08-17 00:19:27 +00:00
Ian Lepore
a8328210d0 Handle command retries for commands originating at the mmc layer, and
ensure that all such commands have a non-zero retry count except for those
that are expected to fail (for example, because they are used to probe for
feature support).

While it is possible to pass a retry count down to the hardware driver in
the command request structure, no hardware driver currently implements any
retry logic.  The hardware doesn't know much about the context of a single
request, so it makes more sense to handle retries at a layer that does.

This adds retry loops to the mmc_wait_for_cmd() and mmc_wait_for_app_cmd()
functions.  These functions are the gateway from other code within mmc.c
to the hardware.  App commands are a sequence of two commands and a retry
has to rerun both of them in order, so it needs its own retry loop.

Retry looping is specifically NOT implemented in mmc_wait_for_request()
because it is the gateway for children on the bus, and they have to
implement their own retry logic depending on what makes sense for them.
2013-08-16 23:05:34 +00:00
Ian Lepore
df736d55a1 During card identification, run the bus at 400KHz, not the minimum
speed the bus claims to be capable of.  The 400KHz speed is dictated
by the SD and MMC standards.
2013-08-16 20:32:56 +00:00
Ian Lepore
65f63c73cb Print the card relative address in hex, because that's what all the
other debugging output does (when it appears in command arguments,
for example).
2013-08-16 20:22:57 +00:00
Rui Paulo
88e07d922d Use meaningful names when creating mmc/sd threads.
This can be useful when we want to be able to identify which mmcsd is stuck.
2013-07-09 03:00:06 +00:00
Warner Losh
c96e8c3222 When reporting the user readable size, round up. Several SD cards not
only use SI units, but also are a couple of percent short. If you need
to know the exact size, diskinfo will return exact results.
2013-05-16 19:44:51 +00:00
Wojciech A. Koszek
735c7fe55e Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.
Submitted by:	Thomas Skibo <ThomasSkibo (at) sbcglobal.net>
Tested by:	wkoszek (ZedBoard)
Reviewed by:	wkoszek, freebsd-arm@ (no objections raised)
2013-04-27 23:07:49 +00:00
Warner Losh
8fa3a54014 Print MB and GB instead of MiB and GiB mislabeled as MB and GB.
SD cards are sold in GB not GiB, this will result in less confusion.
Also, cache parent device pointer to save a few cycles for loops.
2013-04-14 19:21:43 +00:00
Ian Lepore
a350e54067 Set the backlink in mmc commands to the mmc request that contains them. 2013-03-24 17:23:10 +00:00
Oleksandr Tymoshenko
10b7c3bf45 Fix highest voltage detection
Submitted by:	Daisuke Aoyama <aoyama at peach.ne.jp>
Approved by:	imp@
2013-01-21 23:24:16 +00:00
Ed Maste
a4732e3583 Use %u for unsigned serial number 2012-11-22 03:54:51 +00:00
Oleksandr Tymoshenko
a9387eb1df Add BCM2835 SDHCI driver and enable it in Raspberry Pi config 2012-10-29 17:23:45 +00:00
Oleksandr Tymoshenko
d6b3aaf842 Split sdhci driver in two parts: sdhci and sdhci_pci.
sdchi encapsulates a generic SD Host Controller logic that relies on
actual hardware driver for register access.

sdhci_pci implements driver for PCI SDHC controllers using new SDHCI
interface

No kernel config modifications are required, but if you load sdhc
as a module you must switch to sdhci_pci instead.
2012-10-16 01:10:43 +00:00
Kevin Lo
93f01327ea Remove an unneeded NULL check after M_WAITOK. 2012-09-30 09:26:26 +00:00
Warner Losh
bb1ef63f08 The check for MAXPHYS doesn't make sense, so remove it.
Report errors indicated by the transport.  If this is too chatty, I'll
throw it behind a debug write.
Remove commented out debugs that are no longer useful.
2012-08-23 04:35:55 +00:00