vm_pages. Provide trivial implementation which forwards the load to
_bus_dmamap_load_phys() page by page. Right now all architectures use
bus_dmamap_load_ma_triv().
Tested by: pho (as part of the functional patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Original log:
pfctl -ss printed state levels for ICMPv6. Disable this the same
way it has already been done for ICMPv4.
Difference with OpenBSD:
- WITHOUT_INET6 safe
Obtained from: OpenBSD
Original log:
Make sure pd2 has a pointer to the icmp header in the payload; fixes
panic seen with some some icmp types in icmp error message payloads.
Obtained from: OpenBSD
Stricter state checking for ICMP and ICMPv6 packets: include the ICMP type
in one port of the state key, using the type to determine which
side should be the id, and which should be the type. Also:
- Handle ICMP6 messages which are typically sent to multicast
addresses but recieve unicast replies, by doing fallthrough lookups
against the correct multicast address. - Clear up some mistaken
assumptions in the PF code:
- Not all ICMP packets have an icmp_id, so simulate
one based on other data if we can, otherwise set it to 0.
- Don't modify the icmp id field in NAT unless it's echo
- Use the full range of possible id's when NATing icmp6 echoy
Difference with OpenBSD version:
- C99ify the new code
- WITHOUT_INET6 safe
Reviewed by: glebius
Obtained from: OpenBSD
* Don't print any error messages to stderr unless DEBUG is defined.
* Add a DPRINTFX macro for use when errno isn't set.
* Print the error string from libelf when appropriate.
In report_progress(), use nitems(progress_track) instead of manually
hard-coding array size. Wrap long line.
In blk_write(), code verifies that ptr and pa cannot be non-zero
simultaneously. The later check for the page-alignment of the ptr
argument never triggers due to pa != 0 always implying ptr == NULL. I
believe that the intent was to ensure that physicall address passed is
page-aligned, since the address is (temporary) mapped for the duration
of the page write.
Clear the progress_track.visited fields when starting minidump. If
minidump is restarted or taken second time during the system lifetime,
progress is not printed otherwise, making operator suspectible to the
dump status.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
the code executed in the context of debugger, do not be ashamed to
inform loudly about the re-entry. Also, print the backtrace before
obliterating current stack with longjmp, allowing the operator to see
a place which caused the bug.
The change should make it less mysterious debugging the ddb itself.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
installed. Additionally, remove Solaris-specific sections and references,
and replace example outputs with output from lockstat on FreeBSD, since
lockstat's output contains stack traces.
This change also removes some examples that don't seem to work properly on
FreeBSD. The examples should be re-added when lockstat is fixed.
Reported by: avg
MFC after: 1 week
The number of ways to indicate this confuses people.
PR: docs/100196
Reported by: "Dr. Markus Waldeck" <waldeck@gmx.de>
Reported by: Jamie Landeg Jones <jamie.landeg.jones@gmail.com>
The only remaining user was the code that allocates bounce pages for armv4
busdma. It's not clear why bounce pages would need uncached memory, but
if that ever changes, kmem_alloc_attr() would be the way to get it.
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.
Thanks to alc@ for pointing this out.
of the address space downwards, and then returning the lowest mapped
device address from initarm_lastaddr(). This adds over 500MB of kva
space compared to the old way of hardcoding the end address as 0xE0000000.
Also, pre-map most of the SoC's common memory-mapped devices using 1MB
section mappings so that all device access uses just a few TLB entries.
Graphics devices aren't mapped this way yet, but probably should be.
To provide this new functionality without pasting identical code into
multiple imxNN_machdep.c files, rework the imx machdep code so that
things common to the whole family of SoCs are in a new imx_machdep.c file.
The rewritten imxNN_machdep.c files contain just things specific to an
individual SoC.
previous KVA allocations (which the PMAP lazily invalidates) in TLB0 could
shadow device maps in TLB1. Add a big block comment about some of the
caveats with this approach.
BIO_new_mem_buf takes a void* buf, but internally it never modifies the
buf. It assigns the buffer to another pointer and then marks it as
read-only. So deconsting it should be safe here.
Also fix warning about 'buf' possibly being unused in parse_cert()
Approved by: bapt
MFC after: 2 days
X-MFC-With: r257147
device tree into r3. Rather than worrying about mapping that tree, reserving
its space in the global physical memory space, etc., just copy it to some
memory after the kernel.
- Provide pf_altq.h that has only stuff needed for ALTQ.
- Start pf.h, that would have all constant values and
eventually non-kernel structures.
- Build ALTQ w/o pfvar.h, include if_var.h, that before
came via pollution.
- Build tcpdump w/o pfvar.h.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
interface. Make MII drivers forget about 'struct ifnet'.
Later plan is to provide an administrative downcall from ifnet
layer into drivers, to inform them about administrative status
change. If someone thinks that processing MII events for an
administratively down interface is a big problem, then drivers
would turn MII processing off.
The following MII drivers do evil things, like strcmp() on
driver name, so they still need knowledge of ifnet and thus
include if_var.h. They all need to be fixed:
sys/dev/mii/brgphy.c
sys/dev/mii/e1000phy.c
sys/dev/mii/ip1000phy.c
sys/dev/mii/jmphy.c
sys/dev/mii/nsphy.c
sys/dev/mii/rgephy.c
sys/dev/mii/truephy.c
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
/chosen, following the list of allowed console properties in ePAPR. Also
do not require that stdin be defined and equal to stdout: stdin is
nonstandard (for ePAPR) and console in an unexpected place is after all
better than no console.
- Remove explicit requirement that the SOC registers be found except as an
optimization (although the MPC85XX LAW drivers still require they be found
externally, which should change).
- Remove magic CCSRBAR_VA value.
- Allow bus_machdep.c's early-boot code to handle non 1:1 mappings and
systems not in real-mode or global 1:1 maps in early boot.
- Allow pmap_mapdev() on Book-E to reissue previous addresses if the
area is already mapped. Additionally have it check all mappings, not
just the CCSR area.
This allows the console on e500 systems to actually work on systems where
the boot loader was not kind enough to set up a 1:1 mapping before starting
the kernel.
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
All Armada XP chips should be affected. It is necessary to handle
busy interrupt/indication by enabling busy-detect property in DTS.
Tested by: kevlo
Approved by: cognet (mentor)
When using DW UART with BUSY detection it is necessary to wait
until all serial transfers are finished before manipulating the
line control. LCR will not be affected when UART is busy.
In addition, if Divisor Latch Access Bit is being set in order to
modify UART divisors:
1. We will get BUSY interrupt if interrupts are enabled.
2. Because LCR will not be affected the THR and (even worse) IER
contents will be corrupted. This will lead to console hang.
Approved by: cognet (mentor)
