Commit Graph

398 Commits

Author SHA1 Message Date
Emmanuel Vadot
837db84723 uart_snps: Add early printf support
Move the allwinner early printf support to the snps driver as it
should work with all implementation.
While here add instruction for enabling it on 64bits SoCs.
2018-05-01 13:57:08 +00:00
Brooks Davis
6469bdcdb6 Move most of the contents of opt_compat.h to opt_global.h.
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.

Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c.  A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.

Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.

Reviewed by:	kib, cem, jhb, jtl
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14941
2018-04-06 17:35:35 +00:00
Andrew Turner
92457451f4 The Arm pl011 driver assumes it's running a devicetree based system.
It calls OF_* functions to check if it needs to implement workarounds.
This may not be the case on arm64 where we support both FDT and ACPI.
Fix this by checking if we are booting on FDT before calling these checks.

Reviewed by:	ian
Sponsored by:	DARPA, AFRL
Sponsored by:	Cavium (Hardware)
Differential Revision:	https://reviews.freebsd.org/D14515
2018-02-28 15:02:27 +00:00
Andrew Turner
104518ad6d Check all entries in the ACPI uart compat table and not just the first.
Sponsored by:	DARPA, AFRL
2018-02-26 08:45:38 +00:00
Andrew Turner
615395d985 Teach the Arm pl011 driver to attach to a SBSA uart. This is defined in
the Server Base System Architecture to be a subset of the pl011 r1p5. As
we don't use the removed features it is safe to just attach to the existing
driver as is.

Sponsored by:	DARPA, AFRL
2018-02-25 19:43:00 +00:00
Andrew Turner
db65b25f88 Rename the FDT compat_data array to a bus-specific name.
Sponsored by:	DARPA, AFRL
2018-02-25 19:33:27 +00:00
Andrew Turner
c81131d9ec Disable EARLY_PRINTF from the Armada 3700 uart, it breaks when we want
to use EARLY_PRINTF on other SoCs.

Sponsored by:	DARPA, AFRL
2018-02-01 15:05:17 +00:00
Emmanuel Vadot
09ac343759 arm: lpc: Remove support
Code hasn't been touch this it's original commit in 2012 beside api changes.

Reviewed by:	ian
Differential Revision:	https://reviews.freebsd.org/D13625
Discussed with:		freebsd-arm@freebsd.org (no reply)
2018-01-24 22:04:16 +00:00
Ruslan Bukin
e6dd0a0e92 UART Clock Selection Register holds a divider value for a supplied clock,
not a final baud rate. The value for this register has to be calculated.

Sponsored by:	DARPA, AFRL
2018-01-18 18:19:31 +00:00
Ruslan Bukin
9f7743f2c8 Support for UART device found in Qualcomm Snapdragon 410E SoC.
Tested on DragonBoard 410c.

Reviewed by:	andrew
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D13972
2018-01-18 17:43:32 +00:00
Alexander Kabaev
151ba7933a Do pass removing some write-only variables from the kernel.
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
2017-12-25 04:48:39 +00:00
Warner Losh
5fe4723c70 Create a new ISA_PNP_INFO macro. Use this macro every where we have
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
2017-12-23 06:49:27 +00:00
Andrew Turner
fb006e46e7 Set the io width when using an ACPI uart. Previously it would only ever be
set when finding the uart from the device tree.

Sponsored by:	DARPA, AFRL
2017-12-08 10:05:23 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Ed Maste
6e71b3c3ed uart: detect 256-byte FIFOs
Submitted by:	Zakary Nafziger <worldofzak@gmail.com>
Sponsored by:	The FreeBSD Foundation
2017-10-10 20:08:30 +00:00
Marcin Wojtas
ac0770ddb3 Introduce UART driver module for Armada 3700
This patch adds support for UART in Armada 3700 family.
It exposes both low-level UART interface, as well as
standard driver methods.

Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12250
2017-09-09 11:42:32 +00:00
Ed Maste
059178b639 uart: add AX99100 chipset support
PR:		215837
Submitted by:	joe@thrallingpenguin.com
MFC after:	2 weeks
2017-07-27 02:53:18 +00:00
Andrew Turner
88df15adf6 Fix device lookup of for the stdout-path chosen property.
The stdout-path chosen property may include the serial connection details,
e.g. the baud rate. When passing the device to OF_finddevice we need to
strip off this information as it will cause the lookup to fail.

Reviewed by:	emaste, manu
Differential Revision:	https://reviews.freebsd.org/D6846
2017-06-02 14:01:17 +00:00
Ed Maste
ef7161e774 uart: add AMT SOL PCI ID
I adjusted the description to be similar to existing AMT entries.

PR:		219384
Submitted by:	"Tooker"
MFC after:	1 week
2017-05-27 02:07:22 +00:00
Alexander Motin
31da007f7e Fix typo in r317659.
MFC after:	2 weeks
2017-05-03 16:34:03 +00:00
Alexander Motin
4e352a4583 Make some UART consoles to not spin wait for data to be sent.
At least with Tx FIFO enabled it shows me ~10% reduction of verbose boot
time with serial console at 115200 baud.

Reviewed by:	marcel
MFC after:	2 weeks
2017-05-01 19:47:10 +00:00
Ian Lepore
bf8bdd6762 Extend the pl011 small-fifos fix to other SoCs that indicate rev 5
hardware but lack the larger fifos rev 5 hardware should have.

The linux world (where our FDT data comes from) solved this by adding
a new property to pl011 nodes, "arm,primecell-periphid".  When this
property is present, its values override the values in the hardware
periphid registers.  For pl011 rev 5 hardware with small fifos, they
override the id so that it appears to be rev 4 hardware.

The driver now uses the new property when present.  It also continues
to check the device compat string, to handle older fdt data that may
still be in use on existing systems (on RPi systems it is common to
update system software without updating fdt data which is part of the
boot firmware).

Reviewed by:	imp
2017-03-11 22:34:02 +00:00
Ian Lepore
43597fd575 Update the comment for the Wacom WACF00e to make it clear it's not an
accidental duplicate of WACF004.

PR:		217306
2017-03-08 20:58:56 +00:00
Ian Lepore
a90beeeb44 Add the pnp id for a Wacom 'WACF00e' tablet.
PR:		217306
Submitted by:	large.hadron.collider@gmx.com
2017-03-08 20:41:27 +00:00
Ian Lepore
2cb357c5cd Handle fifo size differences between older and newer revs of pl011 hardware.
Starting with rev 5 (which is inexplicably indicated by a version number
of '3' in the Peripheral ID register), the pl011 doubled the size of the
rx and tx fifos, to 32 bytes, so read the ID register and set the size
variables in the softc accordingly.

An interesting wrinkle in this otherwise-simple concept is that the
bcm2835 SoC, used in Raspberry Pi systems among others, has the rev 5
pl011 hardware, but somehow also has the older 16-byte fifos.  We check
the FDT data to see if the hardware is part of a bcm283x system and use
the smaller size if so.

Thanks to jchandra@ for pointing out that newer hardware has bigger fifos.
2017-03-08 18:53:32 +00:00
Ian Lepore
ac0577afe9 Reconfigure the fifo watermark levels on the pl011 uart to interrupt when
the fifos are 3/4 full (rc) or empty (tx).
2017-03-04 22:00:05 +00:00
Ian Lepore
752e8c08fb Fix bugs exposed by the recent enabling of FIFOs in the pl011 uart. These
have been in the code all along, but were masked by having a fifo depth of
one byte at the hardware level, so everything kinda worked by accident.

The hardware interrupts when the TX fifo is half empty, so set
sc->sc_txfifosz to 8 bytes (half the hardware fifo size) to match.  This
eliminates dropped characters on output.

Restructure the read loop to consume all the bytes in the fifo by using
the "rx fifo empty" bit of the flags register rather than the "rx ready"
bit of the interrupt status register.  The rx-ready interrupt is cleared
when the number of bytes in the fifo fall below the interrupt trigger
level, leaving the fifo half full every time receive routine was called.
Now it loops until the fifo is completely empty every time (including
when the function is called due to a receive timeout as well as for
fifo-full).
2017-03-04 21:47:43 +00:00
Ruslan Bukin
c214a270f5 Allow setting access-width for UART registers.
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by:	kan, marcel
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D9785
2017-02-27 20:08:42 +00:00
Ruslan Bukin
2770885882 Revert r314212 as it break Allwinner boards.
Reported by:	manu
2017-02-27 19:46:27 +00:00
Jayachandran C.
43ad57d358 Enable pl011 UART FIFOs
The pl011 UART has a 16 entry Tx FIFO and a 16 entry Rx FIFO that
have not been used so far. Update the driver to enable the FIFOs
and use them in transmit and receive.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D8819
2017-02-26 22:05:22 +00:00
Ruslan Bukin
e42e2a1edc Use correct macro for Synopsys UART driver declaration. 2017-02-24 16:37:35 +00:00
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Bruce M Simpson
fb1d9b7f41 Allow uart(4) to use MSI interrupts on single-port PCI instances.
Do this here as puc(4) disallows single-port instances; at least
one multi-port PCIe UART chip (in this case, the ASIX MCS9922)
present separate PCI configuration space (functions) for each UART.

Tested using lrzsz and a null-modem cable. The ExpressCard/34
variants containing the MCS9922 should also use MSI with this change.

Reviewed by:		jhb, imp, rpokala
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D9123
2017-01-12 16:30:27 +00:00
Jayachandran C.
e4ad7e3451 Fix whitespace issues in pl011 uart driver
Fix up trailing whitespace introduced by r310190. While there,
fix a couple of earlier whitespace errors as well.
2016-12-19 19:40:11 +00:00
Jayachandran C.
660c1ea0b4 Simplify interrupt mask programming in pl011 uart
Remove unused fields from uart_pl011_softc. Add an interrupt mask
field to the softc and use it to set the interrupt mask register.

There should be no functional change introduced here except in the
grab and ungrab functions. In these functions, we now disable and
enable all interrupts rather than just the receive interrupt.
2016-12-17 18:04:59 +00:00
Jayachandran C.
cbee50f1df Fix interrupt clear in pl011 uart receive function
Clear the interrupt state before reading the input char from the
input FIFO. In the current code there is a window between the read
to the data register and the write to the the ICR, during which an
input char will not cause an interrupt.

This fixes the issue by which the serial port input on QEMU freezes
when using the emulated pl011 serial port.
2016-11-29 04:32:14 +00:00
Andrew Turner
ef022bb1de Include the missing accommon.h from the ACPI uart code.
Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-11-21 19:38:57 +00:00
Andrew Turner
eba1a249df Add support to find the arm64 serial using the ACPI tables. This uses the
Serial Port Console Redirection Table to find the device to use.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-11-21 19:26:58 +00:00
Sean Bruno
cb3c7e7f93 Add Intel Atom Cherryview SOC HSUART support
PR:	207910
Submitted by:	johannes@brilliantservice.co.jp
MFC after:	1 week
2016-11-21 14:43:31 +00:00
Andrew Turner
0812ab3141 Add an arm64 specific uart cpu driver. As arm64 may use ACPI to find the
uart we need to handle both it and FDT, and as such we need to have an
architecture specific driver.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7796
2016-11-21 11:27:14 +00:00
Ruslan Bukin
5515b0cb39 Do not reallocate driver softc for uart unnecessarily.
Do not assume that all uart drivers use uart_softc structure as is.
Some do a sensible thing and do declare their uart class and driver
properly and arrive into uart_bus_attach with suitably sized softc.

Submitted by:	kan
Sponsored by:	DARPA, AFRL
2016-11-17 16:06:53 +00:00
Ruslan Bukin
b192bae67e Add support for UART found in the Ingenic XBurst system on chips.
These CPUs has non-standard UART enable bit hidden in the UART FIFO
Control Register.

Sponsored by:	DARPA, AFRL
2016-11-17 14:41:22 +00:00
Andrew Turner
a2696bf3c0 Use ofw_bus_node_is_compatible in more drivers used on arm.
Sponsored by:	ABT Systems Ltd
2016-11-11 15:42:12 +00:00
Justin Hibbits
24f4202df8 Check all compatible strings on uart devices in powerpc
Summary:
Some device trees put "fsl,ns16650" first in the compatible list.  This causes
the probe code to choke, even though the device is compatible with ns16650, and
has it listed later in the tree.

Reviewed by:	nwhitehorn
MFC after:	1 week
Differential Revision: https://reviews.freebsd.org/D7676
2016-08-28 21:31:21 +00:00
Justin Hibbits
7bd8311dec Fix UART PPS capture mode printing
* Add breaks to prevent fallthrough and printing of multiple modes.
* Only check the mode, mask out all other bits.
2016-08-28 04:40:27 +00:00
Andrew Turner
07ef31f240 Remove now unused functions from the FDT uart cpu driver.
Obtained from:	ABT Systems Ltd
MFC after:	1 month
X-MFC with:	r303100
Sponsored by:	The FreeBSD Foundation
2016-07-24 08:52:49 +00:00
Andrew Turner
951154084f Fix the build:
* Add acpi_if.h to the SRC list in the uart module
 * Only include new acpi headers when they are needed

Obtained from:	ABT Systems Ltd
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-07-21 13:01:35 +00:00
Andrew Turner
cf9df3c56b Add support for arm64 to uart_dev_acpi by using the _HID property to find
the uart class to use in a similar way as the fdt driver.

Obtained from:	ABT Systems Ltd
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7248
2016-07-21 09:32:55 +00:00
Andrew Turner
d4c893910d We will be switching to a new arm64 uart cpu driver that handles both FDT
and ACPI. As such pull out what will be the common parts of the FDT cpu
detection to a new function that can be shared between them.

Reviewed by:	manu
Obtained from:	ABT Systems Ltd
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7262
2016-07-20 17:19:47 +00:00
Michal Meloun
dac935533b EXTRES: Add OF node as argument to all <foo>_get_by_ofw_<bar>() functions.
In some cases, the driver must handle given properties located in
specific OF subnode. Instead of creating duplicate set of function, add
'node' as argument to existing functions, defaulting it to device OF node.

MFC after: 3 weeks
2016-07-10 18:28:15 +00:00