Commit Graph

147 Commits

Author SHA1 Message Date
Hans Petter Selasky
855ad7cf39 Check AF family prior resolving address and introduce safer rdma_addr_size() variants in ibcore.
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().

There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB.  When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.

Fix this by introducing new variants
    int rdma_addr_size_in6(struct sockaddr_in6 *addr);
    int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);

that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in.  We can use
these new variants to check what size userspace has passed in before
copying any addresses.

Linux commit:
2975d5de6428ff6d9317e9948f0968f7d42e5d74
09abfe7b5b2f442a85f4c4d59ecf582ad76088d7
84652aefb347297aa08e91e283adf7b18f77c2d5

MFC after:		1 week
Sponsored by:		Mellanox Technologies
2018-07-17 09:24:39 +00:00
Hans Petter Selasky
f4546fa376 Add support for prio-tagged traffic for RDMA in ibcore.
When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.

The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.

Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.

The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().

MFC after:		1 week
Sponsored by:		Mellanox Technologies
2018-07-17 09:11:53 +00:00
Hans Petter Selasky
b70db3278f Set RoCEv2 MGID according to spec in ibcore.
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>

Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.

Linux commit:
be1d325a335840a86c133a56c6a911c368bac0fd
1c3aea2bc8f0b2e5b57375ead40457ff75a3a2ec

MFC after:		1 week
Sponsored by:		Mellanox Technologies
2018-07-17 09:07:36 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Hans Petter Selasky
d0a82c2414 Add IB_SPEED_HDR definition in ibcore.
MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-03-07 13:01:00 +00:00
Hans Petter Selasky
1456d97c01 Optimize ibcore RoCE address handle creation from user-space.
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.

It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.

This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.

This commit combines the following Linux upstream commits:

IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah

MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-03-05 14:34:52 +00:00
Hans Petter Selasky
bf8641fedb Get correct network device when accepting incoming RDMA connections in ibcore.
This patch ensures the GID index is always used as a basis of resolving
incoming RDMA connections, as compared to the GID value itself.

Background:
On a per infiniband port basis, the GID identifier is not a unique identifier!
This assumption falls apart when VLAN ID, IPv6 scope ID and RoCE type,
as supported by RoCE v2, is taken into account. This additional
information is stored in the so-called GID attributes and is needed to
correctly identify the destination network interface for an incoming
connection.

Different VLANs are allowed to define the same IPv4 addresses and especially
for the default IPv6 link-local addresses or when using so-called containers
or jails, this is true.

The VNET information for the destination network interface is needed in
order to perform the L2 address lookup in the right Virtual Network Stack
context.

Consequently old functions previously used by RoCE v1, like
rdma_addr_find_smac_by_sgid() are impossible to support, because
there can be multiple identical GIDs associated with the same
infiniband port, and the answer to such a request becomes undefined.
This function has been removed.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-03-05 14:24:30 +00:00
Hans Petter Selasky
09938b2185 Add missing FreeBSD tags and SVN properties to ibcore.
MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-03-05 11:49:45 +00:00
Hans Petter Selasky
33ec1ccbae Import the mthca kernel side infiniband driver from Linux 4.9 and fix
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.

Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826

Sponsored by:	Mellanox Technologies
2018-02-13 17:04:34 +00:00
Pedro F. Giffuni
fe267a5590 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
Hans Petter Selasky
c2c014f24c Merge ^/head r323559 through r325504. 2017-11-07 08:39:14 +00:00
Hans Petter Selasky
d05554bb99 The remote DMA TCP portspace selector, RDMA_PS_TCP, is used for both
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore

Reviewed by:		np @
Differential Revision:	https://reviews.freebsd.org/D12563
Sponsored by:		Mellanox Technologies
MFC after:		3 days
2017-10-20 08:20:15 +00:00
Hans Petter Selasky
aacb037742 Make sure the IPv6 scope ID gets zeroed inside the GID. Else searching for a
valid GID entry based on IPv6 addresses can fail.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2017-10-10 12:36:41 +00:00
Hans Petter Selasky
9f715dc162 ibcore: Delete old files and add new ones missed in the initial commit
for this projects branch.

Sponsored by:	Mellanox Technologies
2017-07-03 08:32:52 +00:00
Hans Petter Selasky
c19d65049e ibcore: Fix for compiling header files from user-space.
Sponsored by:	Mellanox Technologies
2017-07-03 08:30:43 +00:00
Hans Petter Selasky
478d300572 Initial RoCE/infiniband kernel update to Linux v4.9.
This patch currently supports:
- ibcore as a kernel module only
- krping as a kernel module only
- ipoib as a kernel module only

Sponsored by:	Mellanox Technologies
2017-06-15 12:47:48 +00:00
Hans Petter Selasky
97549c34ec Move the ConnectX-3 and ConnectX-2 driver from sys/ofed into sys/dev/mlx4
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.

- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.

- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.

- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.

- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .

Sponsored by:	Mellanox Technologies
2016-09-30 08:23:06 +00:00
Pedro F. Giffuni
a5a274d0d4 sys/ofed: minor spelling fix.
No functional change.

Reviewed by:	hselasky
2016-05-06 15:37:06 +00:00
Hans Petter Selasky
0bab509b94 More fixes for using IPv6 addresses with RDMA:
- Added check that the SCOPE ID is only restored for IPv6 linklocal
  addresses.

- Changes made by r237263 in the "cma_bind_addr()" function did not
  check if the socket address was of type IPv6 and used the IPv4
  socket address for IPv6 addresses. This caused the function to
  fail. Fixed this.

- In the "rdma_gid2ip()" function and some other places the "sin6_len"
  and "sin6_scope_id" fields were not set for IPv6 socket
  addresses. Fixed this.

- The scope ID is not stored as part of the GID entries and must be
  passed as an argument to "rdma_gid2ip()".

- Added new method to "struct ib_device" which returns a pointer to
  the network interface which belongs to the given infiniband
  device. This is needed to be able to get the scope ID for IPv6
  addresses via the associated ethernet interface.

- Added convenience function, "rdma_get_ipv6_scope_id()", to get the
  scope ID for IPv6 addresses.

- Implemented new "get_netdev" method for mlx4ib. Other IB controller
  drivers which want to support IPv6 addresses needs to implement this
  aswell.

- Bumped the FreeBSD version due to changing "struct ib_device".

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-04-22 18:16:12 +00:00
Navdeep Parhar
097f289f25 Fix for iWARP servers that listen on INADDR_ANY.
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.

Submitted by:	Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D4801
2016-01-22 23:33:34 +00:00
Hans Petter Selasky
b9320e2a6a Remove unused file. 2016-01-07 09:40:19 +00:00
Hans Petter Selasky
c5e5a55f8f Fix i386 build WITH_OFED=YES. Remove some redundant KASSERTs.
Suggested by:	kib, ian
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2015-12-04 18:20:55 +00:00
Hans Petter Selasky
6111807106 Updated the mlx4 and mlxen drivers to the latest version, v2.1.6:
- Added support for dumping the SFP EEPROM content to dmesg.
- Fixed handling of network interface capability IOCTLs.
- Fixed race when loading and unloading the mlxen driver by applying
  appropriate locking.
- Removed two unused C-files.

MFC after:	1 week
Submitted by:	Mark Bloch <markb@mellanox.com>
Sponsored by:	Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D4283
2015-12-03 13:29:20 +00:00
Hans Petter Selasky
3884ff1831 Add some defines needed by the coming mlx5 infiniband support.
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2015-11-24 12:11:56 +00:00
Hans Petter Selasky
8d59ecb214 Finish process of moving the LinuxKPI module into the default kernel build.
- Move all files related to the LinuxKPI into sys/compat/linuxkpi and
  its subfolders.
- Update sys/conf/files and some Makefiles to use new file locations.
- Added description of COMPAT_LINUXKPI to sys/conf/NOTES which in turn
  adds the LinuxKPI to all LINT builds.
- The LinuxKPI can be added to the kernel by setting the
  COMPAT_LINUXKPI option. The OFED kernel option no longer builds the
  LinuxKPI into the kernel. This was done to keep the build rules for
  the LinuxKPI in sys/conf/files simple.
- Extend the LinuxKPI module to include support for USB by moving the
  Linux USB compat from usb.ko to linuxkpi.ko.
- Bump the FreeBSD_version.
- A universe kernel build has been done.

Reviewed by:	np @ (cxgb and cxgbe related changes only)
Sponsored by:	Mellanox Technologies
2015-10-29 08:28:39 +00:00
Hans Petter Selasky
2c8d721186 Add missing FreeBSD RCS keyword and SVN properties.
Sponsored by:	Mellanox Technologies
2015-10-27 12:21:15 +00:00
Hans Petter Selasky
aac7caaf47 Add support for binding IRQs to CPUs in the LinuxKPI. The new function
added is for BSD only and does not exist in Linux.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
2015-10-26 13:28:34 +00:00
Hans Petter Selasky
dfcc270f25 Build fix for MIPS.
Sponsored by:	Mellanox Technologies
2015-10-26 09:34:43 +00:00
Hans Petter Selasky
63ec90e212 Build fix for non-i386 and non-amd64 platforms.
Sponsored by:	Mellanox Technologies
2015-10-23 14:52:05 +00:00
Hans Petter Selasky
2da3897d01 Rename linuxapi[.ko] into linuxkpi[.ko], to reflect that it is a
kernel programming interface module, KPI, to avoid confusion with the
existing Linux userspace binary compatibility shims. Bump the
FreeBSD_version number.

Reviewed by:	np @
Suggested by:	dumbbell @
Sponsored by:	Mellanox Technologies
2015-10-22 09:50:45 +00:00
Hans Petter Selasky
03ae38081c Remove all comments deriving from Linux.
Minor rework of ilog2() function.

Suggested by:	emaste @
Sponsored by:	Mellanox Technologies
2015-10-21 09:37:34 +00:00
Hans Petter Selasky
6f2fc610dd Remove all comments deriving from Linux. Style file for FreeBSD.
Suggested by:	emaste @
Sponsored by:	Mellanox Technologies
2015-10-21 08:51:49 +00:00
Hans Petter Selasky
29a2e474c0 Reimplement header file, remove all comments deriving from Linux and
update copyright to 2-clause BSD.

Suggested by:	emaste @
Sponsored by:	Mellanox Technologies
2015-10-21 07:59:46 +00:00
Hans Petter Selasky
382d6bebd3 Move location of RCS keyword according to style.
Suggested by:	jhb @
Sponsored by:	Mellanox Technologies
2015-10-20 19:08:26 +00:00
Hans Petter Selasky
f89453cfb9 Add missing FreeBSD RCS keyword and SVN properties.
Sponsored by:	Mellanox Technologies
2015-10-20 16:02:11 +00:00
Hans Petter Selasky
65324421da Add missing FreeBSD RCS keyword and SVN properties.
Sponsored by:	Mellanox Technologies
2015-10-20 15:28:02 +00:00
Hans Petter Selasky
c0a8182919 Add missing dash to copyright clause.
Sponsored by:	Mellanox Technologies
2015-10-20 11:42:00 +00:00
Hans Petter Selasky
77320fe897 Add missing FreeBSD RCS keyword and SVN properties.
Sponsored by:	Mellanox Technologies
2015-10-20 11:40:04 +00:00
Hans Petter Selasky
3f862b56a1 Merge LinuxKPI changes from DragonflyBSD:
- Remove redundant NBLONG macro and use BIT_WORD()
  and BIT_MASK() instead.
- Correctly define BIT_MASK() according to Linux and
  update all users of this macro.
- Add missing GENMASK() macro.
- Remove all comments deriving from Linux.

Sponsored by:	Mellanox Technologies
2015-10-20 09:13:35 +00:00
Hans Petter Selasky
a4b5fa85df The returned value from vm_fault_disable_pagefaults() must be stored
and passed to vm_fault_enable_pagefaults(). Else possible recursion on
the state can be lost.

Sponsored by:	Mellanox Technologies
Suggested by:	kib @
2015-10-19 16:03:08 +00:00
Hans Petter Selasky
2ca3cc5132 Merge LinuxKPI changes from DragonflyBSD:
- Redefine DIV_ROUND_UP as a function macro taking two arguments
  instead of none.
- Implement more Linux kernel functions related to various forms
  of DELAY() and basic mathematical operations.

Sponsored by:	Mellanox Technologies
2015-10-19 12:44:41 +00:00
Hans Petter Selasky
e490164bee Merge LinuxKPI changes from DragonflyBSD:
- Implement more Linux kernel functions.

Sponsored by:	Mellanox Technologies
2015-10-19 12:33:09 +00:00
Hans Petter Selasky
f556cede8a Merge LinuxKPI changes from DragonflyBSD:
- Define the kref structure identical to the one found in Linux.
- Update clients referring inside the kref structure.
- Implement kref_sub() for FreeBSD.

Reviewed by:	np @
Sponsored by:	Mellanox Technologies
2015-10-19 12:26:38 +00:00
Hans Petter Selasky
35d974cd0c Merge LinuxKPI changes from DragonflyBSD:
- Map more Linux compiler related defines to FreeBSD ones.

Sponsored by:	Mellanox Technologies
2015-10-19 12:08:06 +00:00
Hans Petter Selasky
f940cc8ffc Map two more Linux error return codes to FreeBSD ones.
Sponsored by:	Mellanox Technologies
2015-10-19 12:04:20 +00:00
Hans Petter Selasky
af5648c465 Implement IS_ERR_OR_NULL() function.
Sponsored by:	Mellanox Technologies
2015-10-19 12:00:52 +00:00
Hans Petter Selasky
2404bdddf1 Merge LinuxKPI changes from DragonflyBSD:
- Add more list related functions and macros.
- Update the hlist_for_each_entry() macro to take one less argument.

Sponsored by:	Mellanox Technologies
2015-10-19 11:57:33 +00:00
Hans Petter Selasky
64bda586e1 Merge LinuxKPI changes from DragonflyBSD:
- Reimplement ktime header file to distinguish more from Linux.
- Add new time header file to handle time related Linux functions.

Sponsored by:	Mellanox Technologies
2015-10-19 11:46:48 +00:00
Hans Petter Selasky
ecfc226c7d Fix compile warning.
Sponsored by:	Mellanox Technologies
2015-10-19 11:29:50 +00:00
Hans Petter Selasky
1610bf8edf Merge LinuxKPI changes from DragonflyBSD:
- Reimplement math64 header file to distinguish more from Linux.

Sponsored by:	Mellanox Technologies
2015-10-19 11:16:38 +00:00