Change ksw_used and ksw_total to unsigned, which increases the maximum
total swap that can be displayed properly from ~8TB to ~16TB.
Obtained from: DragonflyBSD (ecc2e461)
MFC after: 2 weeks
This change consists of two parts:
- allow libkvm to recognize /dev/vmm/* character devices as devices that
provide access to the physical memory of a system (similarly to /dev/fwmem*)
- allow libkvm to recognize that /dev/vmm/* and /dev/fwmem* devices provide
access to the physical memory of live remote systems and, thus, the memory
is writable
As a result, it should be possible to run commands like
$ kgdb -w /path/to/kernel /dev/fwmem0.0
$ kgdb /path/to/kernel /dev/vmm/guest
Reviewed by: kib, jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D8679
kinfo_proc::ki_tdname is three characters shorter than
thread::td_name. Add a ki_moretdname field for these three
extra characters. Add the new field to kinfo_proc32, as well.
Update all in-tree consumers to read the new field and assemble
the full name, except for lldb's HostThreadFreeBSD.cpp, which
I will handle separately. Bump __FreeBSD_version.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D8722
Instead of using a hash table to convert physical page addresses to offsets
in the sparse page array, cache the number of bits set for each 4MB chunk of
physical pages. Upon lookup, find the nearest cached population count, then
add/subtract the number of bits from that point to the page's PTE bit.
Then multiply by page size and add to the sparse page map's base offset.
This replaces O(n) worst-case lookup with O(1) (plus a small number of bits
to scan in the bitmap). Also, for a 128GB system, a typical kernel core of
about 8GB will now only require ~4.5MB of RAM for this approach instead of
~48MB as with the hash table.
More concretely, /usr/sbin/crashinfo against the same core improves from a
max RSS of 188MB and wall time of 43.72s (33.25 user 2.94 sys) to 135MB and
9.43s (2.58 user 1.47 sys). Running "thread apply all bt" in kgdb has a
similar RSS improvement, and wall time drops from 4.44s to 1.93s.
Reviewed by: jhb
Sponsored by: Backtrace I/O
This libcall has been broken since (at least) r174989/8.0-RELEASE.
Bump SHLIB_MAJOR for the change
Differential Revision: https://reviews.freebsd.org/D6052
Relnotes: yes
Reviewed by: jhb, markj
Sponsored by: EMC / Isilon Storage Division
- Don't leak nbufp on realloc failure in kvm_argv
- Catch malloc errors with bufp
- Set buflen last in the "buflen == 0" case to ensure that
bufp/nbufp is properly reallocated on the next go around
Differential Revision: https://reviews.freebsd.org/D6051
MFC after: 1 week
Reviewed by: jhb, markj
Reported by: cppcheck
Sponsored by: EMC / Isilon Storage Division
In particular,
- avoid dereferencing NULL pointers
- test pointers against NULL, not 0
- test for errout == NULL in the top-level functions (kvm_open, kvm_openfiles,
kvm_open2, etc)
- Replace a realloc and free on failure with reallocf
Found with: devel/cocchinelle
Differential Revision: https://reviews.freebsd.org/D5954
MFC after: 1 week
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Use 'pdpe' to extract the PA of the 1GB page instead of 'pde' (which was
a copy and paste bug from the 2MB page case further down).
CID: 1341467
Reported by: pfg
or pte-v6.h in files which needs it.
There are quite internal definitions in pte-v4.h and pte-v6.h headers
specific for corresponding pmap implementation. These headers should be
included only in very few files and an intention is to not hide for
which implementation such files are.
Further, sys/arm/arm/elf_trampoline.c is an example of file which
uses armv4 like pmap implementation for both armv4 and armv6 platforms.
This is another reason why pte.h which includes specific header
according to __ARM_ARCH is not created.
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
missing until it can be cleaned up.
Reviewed by: jhb
Approved by: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3319
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
physaddr. This should allow for a kernel where PHYSADDR and KERNPHYSADDR
are both undefined.
For now libkvm will use the old method of reading physaddr and kernaddr
to allow it to work with old kernels. This could be removed in the future
when enough time has passed.
Differential Revision: https://reviews.freebsd.org/D939
MFC after: 1 week
rather than u_char.
To try and play nice with the ABI, the u_char CPU ID values are clamped
at 254. The new fields now contain the full CPU ID, or -1 for no cpu.
Differential Revision: D955
Reviewed by: jhb, kib
Sponsored by: Norse Corp, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
one significant difference: for LIB32 builds both TARGET_ARCH
and MACHINE_ARCH are defined. TARGET_ARCH confusingly holds the
architecture of the host (e.g. amd64), while MACHINE_ARCH holds
the architecture were trying to build (e.g. i386). With both
set and different, r260022 changed the behaviour to interpret
the condition as building a cross-amd64 libkvm on i386, when
obviously we're trying to build an i386 version on amd64. When
COMPAT_32BIT is defined, we're building LIB32 and ignore the
value of TARGET_ARCH as we did before.
