specified by the -f flag or IFCONFIG_FORMAT environment variable, the user
can request that inet4 subnet masks be printed in CIDR or dotted-quad
notation, in addition to the traditional hex output.
inet6 prefixes can be printed in CIDR as well.
For more documentation see the ifconfig(8) man page.
PR: 169072
Requested by: seanc, marcel, brd, many others
Reviewed by: gnn, jhb (earlier version)
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D2856
Change default regulatory domain from DEBUG (no limitations;
exposes all device channels) to FCC; as a result, newly created wireless
interface with default settings will have less chances to violate
country-specific regulations.
This change will not affect drivers with pre-initialized regdomain
structure (currentry ath(4) and mwl(4)); in that case, the default
channel list must correspond to the default regdomain / country setting.
You can switch to another regdomain / country via corresponding
ifconfig(8) options; the driver must implement ic_getradiocaps()
method to restore full channel list.
Full country / regdomain list may be obtained via
'ifconfig <iface> list countries' command.
Example: change country to Germany:
ifconfig wlan0 down # all wlans on the device must be down
ifconfig wlan0 country DE
ifconfig wlan0 up
# wpa_supplicant(8), dhclient(8) etc
At the creation time:
ifconfig wlan0 create wlandev wpi0 country DE
To make changes permanent add the following line to the rc.conf(5):
create_args_wlan0="country DE"
Tested with
- Intel 3945BG (wpi(4)).
- WUSB54GC (rum(4)).
Reviewed by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6228
that it is NUL terminated. Additional NUL padding is not required
for short names.
Use sizeof(destination) in a few places instead of IFNAMSIZ.
Cast afp->af_ridreq and afp->af_addreq to make the intent of
the code more obvious.
Reported by: Coverity
CID: 1009628, 1009630, 1009631, 1009632, 1009633, 1009635, 1009638
CID: 1009639, 1009640, 1009641, 1009642, 1009643, 1009644, 1009645
CID: 1009646, 1009647, 1010049, 1010050, 1010051, 1010052, 1010053
CID: 1010054, 1011293, 1011294, 1011295, 1011296, 1011297, 1011298
CID: 1011299, 1305821, 1351720, 1351721
MFC after: 1 week
Do not use 20 MHz channel list while checking 40 MHz channels;
it may be different. Just use the corresponding list instead.
Tested by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
PR: 209328
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
This adds the ability to view and configure the STBC parameter for
both transmit and receive.
Whilst here, fix a typo for AMSDU.
TODO:
* manpage update
ic_nchans, from struct:ieee80211req_chaninfo, is an unsigned int.
Use an unsigned index to prevent overflowing the index.
Adopt unsigned integers in other cases where it is useful
to be aware of the unsigned quantities and there is no
risk of the values being negative.
MFC after: 1 week
The standards in the QSFP diagnostics area are not clear when the
additional measurements are present or not. Use a valid temperature
reading as an indicator for the presence of voltage and TX/RX power
measurements.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Tested by: Netflix
Differential Revision: https://reviews.freebsd.org/D5391
Reviewed by: gallatin
This displays the IE names in ifconfig but it doesn't yet decode things.
Submitted by: Idwer Vollering <vidwer@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3782
If one does 'ifconfig tap create name blah', it will return error because the
'name' command doesn't properly populate the request sent to ioctl(...). The
'description' command has the same bug, and is also fixed with this patch.
If one does 'ifconfig tap create mtu 9000 name blah', it DOES work, but 'tap0'
(or other sequence number) is echoed, instead of the expected 'blah'. (assuming
the name change actually succeeded)
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5341
sent using roundrobin protocol and set a better granularity and distribution
among the interfaces. Tuning the number of packages sent by interface can
increase throughput and reduce unordered packets as well as reduce SACK.
Example of usage:
# ifconfig bge0 up
# ifconfig bge1 up
# ifconfig lagg0 create
# ifconfig lagg0 laggproto roundrobin laggport bge0 laggport bge1 \
192.168.1.1 netmask 255.255.255.0
# ifconfig lagg0 rr_limit 500
Reviewed by: thompsa, glebius, adrian (old patch)
Approved by: bapt (mentor)
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D540
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
* remove regdomain.[ch] - it's now part of lib80211.
* convert ifieee80211.c to use the ioctl routines in lib80211 and
implement the "error? exit" wrapper behaviour the callers expect.
Right now net80211 is configured as type IBSS but then treats it
as mediatype ADHOC. This doesn't change that; it just correctly handles
being given a mediatype of IBSS.
Add net.link.lagg.lacp.default_strict_mode which defines
the default value for LACP strict compliance for created
lagg devices.
Also:
* Add lacp_strict option to ifconfig(8).
* Fix lagg(4) creation examples.
* Minor style(9) fix.
MFC after: 1 week
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
gif(4) interface. Add new option "ignore_source" for gif(4) interface.
When it is enabled, gif's encapcheck function requires match only for
packet's destination address.
Differential Revision: https://reviews.freebsd.org/D2004
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
packets on tunnel interfaces. Add support of these ioctls to gre(4),
gif(4) and me(4) interfaces. For incoming packets M_SETFIB() should use
if_fib value from ifnet structure, use proper value in gre(4) and me(4).
Differential Revision: https://reviews.freebsd.org/D2462
No objection from: #network
MFC after: 2 weeks
Sponsored by: Yandex LLC
because a link where looped back NS messages are permanently observed
does not work with either NDP or ARP for IPv4.
- draft-ietf-6man-enhanced-dad is now RFC 7527.
Discussed with: hiren
MFC after: 3 days
- Extend the number of available subtypes for Ethernet media by using some
of the ifmedia word's option bits to help denote subtypes. As a result, the
number of possible Ethernet subtype values increases from 31 to 511.
- Use some of those new values to define new media types.
- lacp_compose_key() recgonizes the new Ethernet media types added.
(Change made as required by a comment in if_media.h)
- New ioctl, SIOGIFXMEDIA, to handle getting the new extended media types.
SIOCGIFMEDIA is retained for backwards compatibility.
- Changes to ifconfig to allow it to handle the new extended media types.
Submitted by: mike@karels.net (original), hselasky
Reviewed by: jfvogel, gnn, hselasky
Approved by: jfvogel (mentor), gnn (mentor)
Differential Revision: http://reviews.freebsd.org/D1965
- Use strlcpy() instead of strcpy().
- Use strlcat() instead of a strlcpy() with a magic number subtracted
from the length.
- Replace strncmp(..., strlen(foo) + 1) with strcmp(...).
Differential Revision: https://reviews.freebsd.org/D1814
Reviewed by: rpaulo
MFC after: 2 weeks
- Add no_dad and ignoreloop per-IF knob. no_dad disables DAD completely,
and ignoreloop is to prevent infinite loop in loopback probing state when
loopback is permanently expected.
Reverse the sorting order of the interfaces addresses familise so it should be
the same as getifaddrs(3) order. [2]
Suggested by: hrs [1], bz [2]
Approved by: hrs, bapt
based on the address family. This should help to recognize interfaces with
multiple AF (e.g. ipv4 and ipv6) with many aliases or additional addresses. The
order of addresses inside a single group is strictly preserved.
Improve the scope_id output for AF_INET6 families, as the
current approach uses hexadecimal string that is basically the ID of an
interface, whilst this information is already depicted by getnameinfo(3) call.
Therefore, now ifconfig just prints the scope of address as it is defined in
2.4 of RFC 2373.
PR: 197270
Approved by: bapt
MFC after: 2 weeks
OpenBSD; unsure why we chose to do so. As groups are a requirement for
pf, exposing them by default will make our pf implementation less
confusing.
While here add a missing free() that OpenBSD fixed 7 years ago.
PR: 194925
Differential Revision: https://reviews.freebsd.org/D1185
Approved by: des
Obtained from: OpenBSD
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
vxlan creates a virtual LAN by encapsulating the inner Ethernet frame in
a UDP packet. This implementation is based on RFC7348.
Currently, the IPv6 support is not fully compliant with the specification:
we should be able to receive UPDv6 packets with a zero checksum, but we
need to support RFC6935 first. Patches for this should come soon.
Encapsulation protocols such as vxlan emphasize the need for the FreeBSD
network stack to support batching, GRO, and GSO. Each frame has to make
two trips through the network stack, and each frame will be at most MTU
sized. Performance suffers accordingly.
Some latest generation NICs have begun to support vxlan HW offloads that
we should also take advantage of. VIMAGE support should also be added soon.
Differential Revision: https://reviews.freebsd.org/D384
Reviewed by: gnn
Relnotes: yes
if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
The FreeBSD is the only system that has the FEC protocol, that is a simple alias
to loadbalance protocol and does not implement the ancient Cisco FEC standard.
From now on, we remove the fec protocol from the documentation and keep the FEC
code only for compatibility.
Phabric: D539
Reviewed by: glebius, thompsa
Approved by: glebius
Sponsored by: QNAP Systems Inc.
and receives frames on any port of the lagg(4).
Phabric: D549
Reviewed by: glebius, thompsa
Approved by: glebius
Obtained from: OpenBSD
Sponsored by: QNAP Systems Inc.
It affects the IPv6 source address selection algorithm (RFC 6724)
and allows override the last rule ("longest matching prefix") for
choosing among equivalent addresses. The address with `prefer_source'
will be preferred source address.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
on "ifconfig -v". I've seen no measurable timing difference
for doing additional SIOCGI2C call for system with 4k vlans.
* Determine appropriate handler (SFP/QSFP) by reading identification
byte (which is the same for both SFF-8472 and SFF-8436) instead
of checking driver name.
MFC with: r270064
Sponsored by: Yandex LLC
* Convert ixgbe to use this ioctl
* Convert ifconfig to use generic i2c handler for "ix" interfaces.
Approved by: Eric Joyner (ixgbe part)
MFC after: 2 weeks
Sponsored by: Yandex LLC
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
This commit does not contain ioctl changes necessary for this
functionality work, there will be another commit soon.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
MFC after: 2 weeks
Sponsored by: Yandex LLC
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.
Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers
MFC after: 2 weeks
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
PR: bin/187551
MFC after: 3 days
Sponsored by: Spectra Logic
