and return without processing event in AEN thread, if controller reset is in progress.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
If a SCSI IO times out, then before initiating OCR, now the driver will try to send a
target reset to the particular target for which the IO is timed out. If that also fails,
then the driver will initiate OCR.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
Did the same by setting sc->aen_cmd = NULL when aborting AEN is successful.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
MFI linked list in megaraid_sas driver is used for mfi-mpt pass-through commands.
This list can be corrupted due to many possible race conditions in driver and
eventually we may see kernel panic.
One example -
MFI frame is freed from calling process as driver send command via polling method and interrupt
for that command comes after driver free mfi frame (actually even after some other context reuse
the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and
access that MFI frame and finally in-used MFI frames list will be corrupted.
High level description of new solution -
Free MFI and MPT command from same context.
Free both the command either from process (from where mfi-mpt pass-through was called) or from
ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which
will do MFI/MPT list.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
Clear the interrupt state before reading the input char from the
input FIFO. In the current code there is a window between the read
to the data register and the write to the the ICR, during which an
input char will not cause an interrupt.
This fixes the issue by which the serial port input on QEMU freezes
when using the emulated pl011 serial port.
This allows pw(8) to operate on passwd and group files with longer lines
than could be accomodated by a stack buffer. It doesn't take more than a
few hundred users to exceed 8192 bytes in /etc/group.
MFC after: 3 weeks
Sponsored by: The University of Oslo
During the upgrade of clang/llvm etc to 3.9.0 in r309124, the PACKAGE
directive in the usr.bin/clang/*.mk files got dropped accidentally.
Restore it, with a few minor changes and additions:
* Correct license in clang.ucl to NCSA
* Add PACKAGE=clang for clang and most of the "ll" tools
* Put lldb in its own package
* Put lld in its own package
Reviewed by: gjb, jmallett
X-MFC-With: 309124
Differential Revision: https://reviews.freebsd.org/D8666
This adds a workaround to incorrectly behaving APs (ie, FreeBSD APs) which
don't beacon out exactly when they should (at TBTT multiples of beacon
intervals.)
It forces the hardware awake (but leaves it in network-sleep so self
generated frames still state that the hardware is asleep!) and will
remain awake until the next sleep transition driven by net80211.
That way if the beacons are just at the wrong interval, we get a much
better chance of hearing more consecutive beacons before we go to sleep,
thus not constantly disconnecting.
Tested:
* AR9485, STA mode, against a misbehaving FreeBSD AP.
The 802.11-2012 spec talks about this - section 10.1.3.2 - Beacon Generation
in Infrastructure Networks. So yes, we should be expecting beacons to be
going out in multiples of intval.
Silly adrian.
So:
* fix the FreeBSD APs that are sending beacons at incorrect TBTTs (target
beacon transmit time); and
* yes indeed we will have to wake up out of network sleep until we sync
a beacon.
ASMedia ASM1062 AHCI chips with some fancy firmware handling PMP inside
seems sometimes forgeting to set bits in PxIS, causing command timeouts.
Removal of this check fixes the issue by the theoretical cost of slightly
higher CPU usage in some odd cases, but this is what Linux does too.
MFC after: 1 month
Note: there was a merge conflict resolved by me.
illumos/illumos-gate@43297f973a43297f973ahttps://www.illumos.org/issues/3821
We recently had nodes with some of the latest zfs bits panic on us in a
rollback-heavy environment. The following is from my preliminary analysis:
Let's look at where we died:
> $C
ffffff01ea6b9a10 taskq_dispatch+0x3a(0, fffffffff7d20450, ffffff5551dea920, 1)
ffffff01ea6b9a60 zil_clean+0xce(ffffff4b7106c080, 7e0f1)
ffffff01ea6b9aa0 dsl_pool_sync_done+0x47(ffffff4313065680, 7e0f1)
ffffff01ea6b9b70 spa_sync+0x55f(ffffff4310c1d040, 7e0f1)
ffffff01ea6b9c20 txg_sync_thread+0x20f(ffffff4313065680)
ffffff01ea6b9c30 thread_start+8()
If we dig in we can find that this dataset corresponds to a zone:
> ffffff4b7106c080::print zilog_t zl_os->os_dsl_dataset->ds_dir->dd_myname
zl_os->os_dsl_dataset->ds_dir->dd_myname = [ "8ffce16a-13c2-4efa-a233-
9e378e89877b" ]
Okay so we have a null taskq pointer. That only happens during the calls to
zil_open and zil_close. If we poke around we can see that we're actually in
midst of a rollback:
> ::pgrep zfs | ::printf "0x%x %s\\n" proc_t . p_user.u_psargs
0xffffff43262800a0 zfs rollback zones/15714eb6-f5ea-469f-ac6d-
4b8ab06213c2@marlin_init
0xffffff54e22a1028 zfs rollback zones/8ffce16a-13c2-4efa-a233-
9e378e89877b@marlin_init
0xffffff4362f3a058 zfs rollback zones/0ddb8e49-ca7e-42e1-8fdc-
4ac4ba8fe9f8@marlin_init
0xffffff5748e8d020 zfs rollback zones/426357b5-832d-4430-953e-
10cd45ff8e9f@marlin_init
0xffffff436b867008 zfs rollback zones/8f36bf37-8a9c-4a44-995c-
6d1b2751e6f5@marlin_init
0xffffff4381ad4090 zfs rollback zones/6c8eca18-fbd6-46dd-ac24-
2ed45cd0da70@marlin_init
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@43297f973a43297f973ahttps://www.illumos.org/issues/3821
We recently had nodes with some of the latest zfs bits panic on us in a
rollback-heavy environment. The following is from my preliminary analysis:
Let's look at where we died:
> $C
ffffff01ea6b9a10 taskq_dispatch+0x3a(0, fffffffff7d20450, ffffff5551dea920, 1)
ffffff01ea6b9a60 zil_clean+0xce(ffffff4b7106c080, 7e0f1)
ffffff01ea6b9aa0 dsl_pool_sync_done+0x47(ffffff4313065680, 7e0f1)
ffffff01ea6b9b70 spa_sync+0x55f(ffffff4310c1d040, 7e0f1)
ffffff01ea6b9c20 txg_sync_thread+0x20f(ffffff4313065680)
ffffff01ea6b9c30 thread_start+8()
If we dig in we can find that this dataset corresponds to a zone:
> ffffff4b7106c080::print zilog_t zl_os->os_dsl_dataset->ds_dir->dd_myname
zl_os->os_dsl_dataset->ds_dir->dd_myname = [ "8ffce16a-13c2-4efa-a233-
9e378e89877b" ]
Okay so we have a null taskq pointer. That only happens during the calls to
zil_open and zil_close. If we poke around we can see that we're actually in
midst of a rollback:
> ::pgrep zfs | ::printf "0x%x %s\\n" proc_t . p_user.u_psargs
0xffffff43262800a0 zfs rollback zones/15714eb6-f5ea-469f-ac6d-
4b8ab06213c2@marlin_init
0xffffff54e22a1028 zfs rollback zones/8ffce16a-13c2-4efa-a233-
9e378e89877b@marlin_init
0xffffff4362f3a058 zfs rollback zones/0ddb8e49-ca7e-42e1-8fdc-
4ac4ba8fe9f8@marlin_init
0xffffff5748e8d020 zfs rollback zones/426357b5-832d-4430-953e-
10cd45ff8e9f@marlin_init
0xffffff436b867008 zfs rollback zones/8f36bf37-8a9c-4a44-995c-
6d1b2751e6f5@marlin_init
0xffffff4381ad4090 zfs rollback zones/6c8eca18-fbd6-46dd-ac24-
2ed45cd0da70@marlin_init
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
This was being done in the pre-AR9380 case, but not for AR9380 and later.
When powersave in STA mode is enabled, this may have lead to the transmit
completion code doing this:
* call the task, which doesn't wake up the hardware
* complete the frames, which doesn't touch the hardware
* schedule pending frames on the hardware queue, which DOES touch the
hardware, and this will be ignored
This would show up in the logs like this:
(with debugging enabled):
Nov 27 23:03:56 lovelace kernel: Q1[ 0] (nseg=1) (DS.V:0xfffffe011bd57300 DS.P:0x49b57300) I: 168cc117 L:00000000 F:0005
...
(in general, doesn't require debugging enabled):
Nov 27 23:03:56 lovelace kernel: ath_hal_reg_write: reg=0x00000804, val=0x49b57300, pm=2
That register is a EDMA TX FIFO register (queue 1), and the val is the descriptor
being written.
Whilst here, make sure the software queue gets kicked here.
Tested;
* AR9485, STA mode + powersave
Since hypervisor does not respond CHOPEN to a revoked channel.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8636
Just in case that no chimney sending buffer can be used.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8619
