Keep resource state consistent with INTRNG state - if intr_activate_irq
fails - deactivate resource and propagate error to calling function
Reviewed by: mmel
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
PIC_SETUP_INTR implementation in GICv3 did not allow
for setting up interrupts without included FDT
description. GICv2m-like MSI interrupts, which map
MSI messages to SPI interrupt lines, may not have
a description in FDT. Add support for such interrupts
by setting the trigger and polarity to the appropriate
values for MSI (edge, high) and get the hardware
IRQ number from the corresponding ISRC.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7662
As this is evaluation hardware with only a few users, and there is a lack
of information add a warning when booting on this hardware.
Reported by: cognet
Obtained from: ABT Systems Ltd
MFC after: Instant
Sponsored by: The FreeBSD Foundation
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
the data cache to the point of unification. This is the point where the
two caches are unified to a single unified cache so cleaning past here
is just extra unneeded work.
This was noticed when investigating r305545.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
page is non-executable the contents of the i-cache are unimportant so this
call is just adding unneeded overhead when inserting pages.
While doing research using gem5 with an O3 pipeline and 1k/32k/1M iTLB/L1
iCache/L2 Bjoern Zeeb (bz@) observed a fairly high rate of calls into
arm64_icache_sync_range() from pmap_enter() along with a high number of
instruction fetches and iTLB/iCache hits.
Limiting the calls to arm64_icache_sync_range() to only executable pages,
we observe the iTLB and iCache Hit going down by about 43%. These numbers
are quite misleading when looked at alone as at the same time instructions
retired were reduced by 19.2% and instruction fetches were reduced by 38.8%.
Overall this reduced the runtime of the test program by 22.4%.
On Juno hardware, in steady-state, running the same test, using the cycle
count to determine runtime, we do see a reduction of up to 28.9% in runtime.
While these numbers certainly depend on the program executed, we expect an
overall performance improvement.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This commit adds drivers for Alpine Cache Coherency Unit
and North Bridge Service whose task is to configure
the system fabric and enable cache coherency.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7565
survived multiple world and kernel builds, and of poudriere building full
package sets.
I have observed a 3% reduction in buildworld times with superpages enabled,
however further testing is needed to see if this is observed in other
workloads.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
will allow drivers that manage the clock frequency to communicate this with
the reset of the kernel.
Reported by: jmcneill
MFC after: 1 week
Sponsored by: ABT Systems Ltd
* Pass the correct virtual address when demoting a superpage
* Use the correct l3 table after demoting a superpage
* Remove an invalid KASSERT hit demoting then promoting a superpage [1]
With this it is believed that superpages on arm64 is stable.
Reported by: [1] cognet
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
there is a short period where functions that walk the kernel page table
without locking them may see an invalid entry. One solution would be to add
locking to these functions, however some may be called from locations where
we are unable to sleep.
Until a better solution can be found stop promoting pages in the kernel
pmap so these functions work as expected.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
the l2 entry is a block type and not an l3 page.
While here fix the string to correct the level name and add a missing ')'.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
to what the 32-bit arm code does, with the exception that it always assumes
the tag is non-coherent.
Tested by: jmcneill
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
needed before enabling superpages on arm64. This code is based on the amd64
pmap with changes as needed to handle the differences between the two
architectures.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
iterate over superpages. We don't yet create these, but soon will.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
In all of these source files, the userspace pointer size corresponds
with the kernelspace pointer size, meaning that casting directly works.
As I'm planning on making 32-bit execution on 64-bit systems work as
well, use TO_PTR() here as well, so that the changes between source
files remain minimal.
finding the vm_page_t in pmap_extract_and_hold. Previously it would return
the vm_page_t of the first page in a block. This would cause issues when,
for example, fsck reads from a device into the middle of a superpage. In
this case the read call would write to the start of the block, and not to
the buffer passed in.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
pagetable is supported more will be added soon to support removing
superpages.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
physical address. This is required when either mapping is writeable.
While here remove an unneeded call to pmap_pde, we already have the pde
from earlier in the function.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
promote memory as I am not sure all the demotion cases are handled, however
it is useful to implement pmap_page_set_memattr. This is used, for example,
when mapping uncached memory for bus_dma(9).
pmap_page_set_memattr needs to demote the DMAP region as on ARM we need to
ensure all mappings to the same physical address have the same attributes.
Reviewed by: kib
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6987
CloudABI executables already provide support for passing in vDSOs. This
functionality is used by the emulator for OS X to inject system call
handlers. On FreeBSD, we could use it to optimize calls to
gettimeofday(), etc.
Though I don't have any plans to optimize any system calls right now,
let's go ahead and already pass in a vDSO. This will allow us to
simplify the executables, as the traditional "syscall" shims can be
removed entirely. It also means that we gain more flexibility with
regards to adding and removing system calls.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7438
On all the other architectures, this function can also be called on the
currently running thread. In this case, we shouldn't fix up the address
in the PCB, but also patch up the register itself. Otherwise it will not
become active and will simply become overwritten by the next switch.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7437
as invalidation will have completed before the pmap_invalidate_* functions
have complete.
Discussed with: alc, kib
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
between ACPI and FDT. This will be needed on machines with both, e.g. the
SoftIron Overdrive 3000. The kernel will accept one or more comma separated
values of either 'acpi' or 'fdt'. Any other values are skipped.
To set it the user can either set it on the loader command line, or
in loader.conf e.g. in loader.conf:
kern.cfg.order=acpi,fdt
This will try using ACPI then FDT. If none of the selected options work the
kernel tries to use one to get the serial console, then panics.
Reviewed by: emaste (earlier version)
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7274
inner-shareable memory accesses. There is no need for full system barriers.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
only for now, but wouldn't be too difficult to add support for FDT.
Reviewed by: hselasky
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7352
the ITS driver file. There is no need for other drivers to need to know
about these structures.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
It turns out that this value is not used within the system call code
under normal conditions, except when using tracing tools like ktrace.
If we forget to set this value, it is set to random garbage. This may
cause ktrace to hang indefinitely, making it impossible to kill.
Reported by: Michael Plass
PR: 210800
MFC before: 11.0-RELEASE
to INTRNG in r301565 with the old code no longer being built by default with
no reports of issues on any supported hardware.
Approved by: re (gjb)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
uncategorised reason. We need to read the fault address register before
enabling interrupts as the interrupt handler may cause this register to
change.
Approved by: re (marius, kib)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
threads, to make it less confusing and using modern kernel terms.
Rename the functions to reflect current use of the functions, instead
of the historic KSE conventions:
cpu_set_fork_handler -> cpu_fork_kthread_handler (for kthreads)
cpu_set_upcall -> cpu_copy_thread (for forks)
cpu_set_upcall_kse -> cpu_set_upcall (for new threads creation)
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (hrs)
Differential revision: https://reviews.freebsd.org/D6731
framework has significantly changed the driver has moved to a new file.
While it shares some code with the existing driver this has been modified
to work better with the intrng framework.
This has been tested on the ThunderX servers in the netperf cluster and has
been used to boot them for other testing, including DTrace and hwpmc.
With this we can use intrng on all supported arm64 platforms I was able to
test on. It is expected we will move to intrng soon, and disable the old
arm64 interrupt framework.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6437
a non-zero ID. To do this we increment the cpuid of any CPUs with a smaller
devicetree ID by one to stop them conflicting with the boot CPU.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
this to be the case. This will mean we don't try and handle the cache in
bus_dmamap_sync when it is not needed.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6605
tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Allow to deallocate previously allocated ITS device along with
its interrupts. Interrupt numbers are being freed when the last
LPI number is no longer busy.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6351
supports the Security Extensions or not. This bit is not the same as the CPU one.
Currently we are not checking for either before trying to write to the special
registers. This can lead to problems on hardware or simulators that do not
provide the security extensions. Add the missing checks. Their interactions with
the CPU flag is not entirely clear to me but using a macro will make it easier
to quickly adjust the condition once the CPU bits are sorted as well.
Reviewed by: br
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6397
* In gic_v3_attach free the correct data on failure.
* Implement gic_v3_teardown_intr.
* Update the panic string when enabling/disabling an invalid interrupt.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
