and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
It looks like these sysctls were copy-pasted from netmap. Most were changed
from 'ixl_' prefix to 'iflib_', but this one was missed.
Fix the "can't re-use a leaf (ixl_rx_miss_bufs)!" warning.
Reported by: dim@ and others
Sponsored by: EMC / Isilon Storage Division
mp_maxid or CPU_FOREACH() as appropriate. This fixes a number of places in
the kernel that assumed CPU IDs are dense in [0, mp_ncpus) and would try,
for example, to run tasks on CPUs that did not exist or to allocate too
few buffers on systems with sparse CPU IDs in which there are holes in the
range and mp_maxid > mp_ncpus. Such circumstances generally occur on
systems with SMT, but on which SMT is disabled. This patch restores system
operation at least on POWER8 systems configured in this way.
There are a number of other places in the kernel with potential problems
in these situations, but where sparse CPU IDs are not currently known
to occur, mostly in the ARM machine-dependent code. These will be fixed
in a follow-up commit after the stable/11 branch.
PR: kern/210106
Reviewed by: jhb
Approved by: re (glebius)
will cal if_free() in case of conflict, error, ..
if_free() however sets the VNET instance from the ifp->if_vnet which
was not yet initialized but would only in if_attach(). Fix this by
setting the curvnet from where we allocate the interface in if_alloc().
if_attach() will later overwrite this as needed. We do not set the home_vnet
early on as we only want to prevent the if_free() panic but not change any
of the other housekeeping, e.g., triggered through ifioctl()s.
Reviewed by: brooks
Approved by: re (gjb)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7010
proper virtualisation, teardown, avoiding use-after-free, race conditions,
no longer creating a thread per VNET (which could easily be a couple of
thousand threads), gracefully ignoring global events (e.g., eventhandlers)
on teardown, clearing various globally cached pointers and checking
them before use.
Reviewed by: kp
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6924
use. Update comments regarding the spare fields in struct inpcb.
Bump __FreeBSD_version for the changes to the size of the structures.
Reviewed by: gnn@
Approved by: re@ (gjb@)
Sponsored by: Chelsio Communications
some fields to match the order in the struct. Especially needed
if_pf_kif to do pf(4) VNET debugging.
Approved by: re (marius)
Obtained from: projects/vnet
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
without VIMAGE support would dereference a NULL point unconditionally
leading to a panic. Wrap the entire VIMAGE related code with #ifdefs
rather than just the decision making part to save an extra bit of
resources.
Reported by: np
Sponsored by: The FreeBSD Foundation
MFC After: 13 days
Approved by: re (marius)
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
Adopt the OpenBSD syntax for setting and filtering on VLAN PCP values. This
introduces two new keywords: 'set prio' to set the PCP value, and 'prio' to
filter on it.
Reviewed by: allanjude, araujo
Approved by: re (gjb)
Obtained from: OpenBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D6786
Due to an accidental mismatch between allocation and release in the slow path
of iflib_if_transmit, if a caller passed 9-16 mbufs to the routine, the mbuf
array would be leaked.
Fix the mismatch by removing the magic numbers in favor of nitems() on the
stack array. According to mmacy, this leak is unlikely.
Reported by: Coverity
Discussed with: mmacy
CID: 1356040
Sponsored by: EMC / Isilon Storage Division
Support for compression has been available from July 2007 but it
was never imported due to concerns with patents once held by
STAC/HiFn. The issues have clearly been resolved so bring it
in now.
Special thanks to Brett Glass for preserving the code and
pointing documentation for the expiration case.
Obtained from: mav (through Brett Glass)
Relnotes: yes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6739
to NULL to avoid it being mis-treated on a possible re-attach but also
to get a clean NULL pointer derefence in case of errors due to
unexpected race conditions elsewhere in the code, e.g., callouts.
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
due to called functions (as in other parts of the stack, leave a comment).
Put around a lock the removal of the ifa from the list however to
reduce the possible race with other places.
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
family as an argument as well.
This will be used to cleanup individual protocols during VNET teardown.
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
which refers to IEEE 802.1p class of service and maps to the frame
priority level.
Values in order of priority are: 1 (Background (lowest)),
0 (Best effort (default)), 2 (Excellent effort),
3 (Critical applications), 4 (Video, < 100ms latency),
5 (Video, < 10ms latency), 6 (Internetwork control) and
7 (Network control (highest)).
Example of usage:
root# ifconfig em0.1 create
root# ifconfig em0.1 vlanpcp 3
Note:
The review D801 includes the pf(4) part, but as discussed with kristof,
we won't commit the pf(4) bits for now.
The credits of the original code is from rwatson.
Differential Revision: https://reviews.freebsd.org/D801
Reviewed by: gnn, adrian, loos
Discussed with: rwatson, glebius, kristof
Tested by: many including Matthew Grooms <mgrooms__shrew.net>
Obtained from: pfSense
Relnotes: Yes
Add accessor functions to toggle the state per VNET.
The base system (vnet0) will always enable itself with the normal
registration. We will share the registered protocol handlers in all
VNETs minimising duplication and management.
Upon disabling netisr processing for a VNET drain the netisr queue from
packets for that VNET.
Update netisr consumers to (de)register on a per-VNET start/teardown using
VNET_SYS(UN)INIT functionality.
The change should be transparent for non-VIMAGE kernels.
Reviewed by: gnn (, hiren)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6691
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
to use TRYLOCK rather than just acquire the lock, so just do that.
Reviewed by: markj
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6578
changing the type on the mtu field in struct tuninfo from short to
unsigned short.
This is used, for example, by packetdrill to test with MTUs up to the
maximum value.
Differential Revision: 6452
function in vnet.c move it to if.c where it logically belongs and put
it under a VNET_SYSUNINIT() call.
To not change the current behaviour make sure it runs first thing
during teardown. In the future this will allow us more flexibility
on changing the order on when we want to get rid of interfaces.
Stop exporting if_vmove() and make it file static.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6438
This is set to the SI_SUB_* value before executing any VNET_SYSINIT
or VNET_SYSUNINT. While good for debugging especially VNET teardown
problems having a chance to know at which level during teardown we are,
it will also be used to identify to detcted a "stable state"
(as in fully up and running) later on.
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Differential Revision: http://reviews.freebsd.org/D5875
It seems rn_dupedkey may be NULL, because of the NULL check inside the loop.
(Also, the rt gets assigned from rn_dupedkey and NULL checked at top of loop.)
However, the for-loop update condition happens before the top-of-loop check and
dereferences 'rt' unconditionally.
Instead, NULL-check before dereferencing.
If rn_dupedkey cannot in fact be NULL, or something else protects this, feel
free to revert this and add an ASSERT of some kind instead.
This was introduced in r191080 (2009) and moved around slightly in r293657.
Reported by: Coverity
CID: 1348482
Sponsored by: EMC / Isilon Storage Division
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
R_Zalloc is essentially a malloc(M_NOWAIT) wrapper. It is possible that 'rnh'
failed to allocate, but 'rmh' succeeds. In that case, we bail out of
rn_inithead() but previously did not free 'rmh'.
Introduced in r287073 (projects/routing) / MFP r294706.
Reported by: Coverity
CID: 1350258
Sponsored by: EMC / Isilon Storage Division
'lst' is allocated with 'n1' members. 'n' indexes 'lst'. So 'n == n1' is an
invalid 'lst' index. This is a follow-up to r296009.
Reported by: Coverity
CID: 1352743
Sponsored by: EMC / Isilon Storage Division
handler notifying about interface departure and one of the consumers will
detach if_bpf.
There is no way for us to re-attach this easily as the DLT and hdrlen are
only given on interface creation.
Add a function to allow us to query the DLT and hdrlen from a current
BPF attachment and after if_attach_internal() manually re-add the if_bpf
attachment using these values.
Found by panics triggered by nd6 packets running past BPF_MTAP() with no
proper if_bpf pointer on the interface.
Also add a basic DDB show function to investigate the if_bpf attachment
of an interface.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5896
- properly V_irtualise variable access unbreaking VIMAGE kernels.
- remove the volatile from the function return type to make architecture
using gcc happy [-Wreturn-type]
"type qualifiers ignored on function return type"
I am not entirely happy with this solution putting the u_int there
but it will do for now.
route caching for TCP, with some improvements. In particular, invalidate
the route cache if a new route is added, which might be a better match.
The cache is automatically invalidated if the old route is deleted.
Submitted by: Mike Karels
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4306
Unlike buf_ring_peek, it only supports single consumer mode, and it
clears the cons_head if DEBUG_BUFRING/INVARIANTS is defined.
The normal use case of drbr_peek for network drivers is:
m = drbr_peek(br);
err = hw_spec_encap(&m); /* could m_defrag/m_collapse */
(*)
if (err) {
if (m == NULL)
drbr_advance(br);
else
drbr_putback(br, m);
/* break the loop */
}
drbr_advance(br);
The race is:
If hw_spec_encap() m_defrag or m_collapse the mbuf, i.e. the old mbuf
was freed, or like the Hyper-V's network driver, that transmission-
done does not even require the TX lock; then on the other CPU at the
(*) time, the freed mbuf could be recycled and being drbr_enqueue even
before the current CPU had the chance to call drbr_{advance,putback}.
This triggers a panic in drbr_enqueue duplicated element check, if
DEBUG_BUFRING/INVARIANTS is defined.
Use buf_ring_peek_clear_sc() in drbr_peek() to fix the above race.
This change is a NO-OP, if neither DEBUG_BUFRING nor INVARIANTS are
defined.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5416
Copy the data into temprorary malloced buffer and drop the lock for
copyout.
Reported, reviewed and tested by: cem
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Fix a panic that occurs when a vnet interface is unavailable at the time the
vnet jail referencing said interface is stopped.
Sponsored by: FIS Global, Inc.
back and harmize the use cases among RIB, IPFW, PF yet but it's also not
the scope of this work. Prevents instant panics on teardown and frees
the FIB bits again.
Sponsored by: The FreeBSD Foundation
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
sent using roundrobin protocol and set a better granularity and distribution
among the interfaces. Tuning the number of packages sent by interface can
increase throughput and reduce unordered packets as well as reduce SACK.
Example of usage:
# ifconfig bge0 up
# ifconfig bge1 up
# ifconfig lagg0 create
# ifconfig lagg0 laggproto roundrobin laggport bge0 laggport bge1 \
192.168.1.1 netmask 255.255.255.0
# ifconfig lagg0 rr_limit 500
Reviewed by: thompsa, glebius, adrian (old patch)
Approved by: bapt (mentor)
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D540
easier. Note: this is currently not in a usable state as certain
teardown parts are not called and the DOMAIN rework is missing.
More to come soon and find its way to head.
Obtained from: P4 //depot/user/bz/vimage/...
Sponsored by: The FreeBSD Foundation
Move actual rte selection process from rtalloc_mpath_fib()
to the rt_path_selectrte() function. Add public
rt_mpath_select() to use in fibX_lookup_ functions.
The only piece of information that is required is rt_flags subset.
In particular, if_loop() requires RTF_REJECT and RTF_BLACKHOLE flags
to check if this particular mbuf needs to be dropped (and what
error should be returned).
Note that if_loop() will always return EHOSTUNREACH for "reject" routes
regardless of RTF_HOST flag existence. This is due to upcoming routing
changes where RTF_HOST value won't be available as lookup result.
All other functions require RTF_GATEWAY flag to check if they need
to return EHOSTUNREACH instead of EHOSTDOWN error.
There are 11 places where non-zero 'struct route' is passed to if_output().
For most of the callers (forwarding, bpf, arp) does not care about exact
error value. In fact, the only place where this result is propagated
is ip_output(). (ip6_output() passes NULL route to nd6_output_ifp()).
Given that, add 3 new 'struct route' flags (RT_REJECT, RT_BLACKHOLE and
RT_IS_GW) and inline function (rt_update_ro_flags()) to copy necessary
rte flags to ro_flags. Call this function in ip_output() after looking up/
verifying rte.
Reviewed by: ae
Such handler should pass different set of variables, instead
of directly providing 2 locked route entries.
Given that it hasn't been really used since at least 2012, remove
current code.
Will re-add it after finishing most major routing-related changes.
Discussed with: np
Last consumer using RTF_RNH_LOCKED flag was eliminated in r291643.
Restrict passing RTF_RNH_LOCKED to rtrequest1_fib() and do better
locking for RTM_ADD / RTM_DELETE cases.
entries data in unified format.
There are control plane functions that require information other than
just next-hop data (e.g. individual rtentry fields like flags or
prefix/mask). Given that the goal is to avoid rte reference/refcounting,
re-use rt_addrinfo structure to store most rte fields. If caller wants
to retrieve key/mask or gateway (which are sockaddrs and are allocated
separately), it needs to provide sufficient-sized sockaddrs structures
w/ ther pointers saved in passed rt_addrinfo.
Convert:
* lltable new records checks (in_lltable_rtcheck(),
nd6_is_new_addr_neighbor().
* rtsock pre-add/change route check.
* IPv6 NS ND-proxy check (RADIX_MPATH code was eliminated because
1) we don't support RTF_ANNOUNCE ND-proxy for networks and there should
not be multiple host routes for such hosts 2) if we have multiple
routes we should inspect them (which is not done). 3) the entire idea
of abusing KRT as storage for ND proxy seems odd. Userland programs
should be used for that purpose).
Add ro_mtu field to 'struct route' to be able to pass lookup MTU back to
the caller.
Currently, ip6_getpmtu() has 2 totally different use cases:
1) control plane (IPV6_PATHMTU req), where we just need to calculate MTU
and return it, w/o any reusability.
2) Actual ip6_output() data path where we (nearly) always use the provided
route lookup data. If this data is not 'valid' we need to perform another
lookup and save the result (which cannot be re-used by ip6_output()).
Given that, handle 1) by calling separate function doing rte lookup itself.
Resulting MTU is calculated by (newly-added) ip6_calcmtu() used by both
ip6_getpmtu_ctl() and ip6_getpmtu().
For 2) instead of storing ref'ed rte, store mtu (the only needed data
from the lookup result) inside newly-added ro_mtu field.
'struct route' was shrinked by 8(or 4 bytes) in r292978. Grow it again
by 4 bytes. New ro_mtu field will be used in other places like
ip/tcp_output (EMSGSIZE handling from output routines).
Reviewed by: ae
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
implemented to lower the compiler warnings.
It fix the case of unused-but-set-variable spotted by gcc4.9.
Reviewed by: ngie, ae
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D4720
epair(4), we may hit if_detach_internal() without holding a lock and by
the time we aquire it the interface might be gone.
We should not panic() in this case as it is our fault for not holding
the lock all the way. It is not ideal to return silently without error
to user space, but other callers will all ignore the return values so
do not change the entire KPI for little benefit for now.
The ifp will be dealt with one way or another still.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4529
creation will print extra lines on the console. We are generally not
interested in this (repeated) information for each VNET. Thus only
print it for the default VNET. Virtual interfaces on the base system
will remain printing information, but e.g. each loopback in each vnet
will no longer cause a "bpf attached" line.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4531
initialization.
Mfp4 @180384,180385:
There is no need for a dedicated SYSINIT here. The
list can be initialized statically.
Sponsored by: CK Software GmbH
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4528
Before the change, things like lle state were queried via
SIOCGNBRINFO_IN6 by ndp(8) for _each_ lle entry in dump.
This ioctl was added in 1999, probably to avoid touching rtsock code.
This change maps SIOCGNBRINFO_IN6 data to standard rtsock dump the
following way:
expire (already) maps to rtm_rmx.rmx_expire
isrouter -> rtm_flags & RTF_GATEWAY
asked -> rtm_rmx.rmx_pksent
state -> rtm_rmx.rmx_state (maps to rmx_weight via define)
Reviewed by: ae
When using lagg failover mode neither Gratuitous ARP (IPv4) or Unsolicited
Neighbour Advertisements (IPv6) are sent to notify other nodes that the
address may have moved.
This results is slow failover, dropped packets and network outages for the
lagg interface when the primary link goes down.
We now use the new if_link_state_change_cond with the force param set to
allow lagg to force through link state changes and hence fire a
ifnet_link_event which are now monitored by rip and nd6.
Upon receiving these events each protocol trigger the relevant
notifications:
* inet4 => Gratuitous ARP
* inet6 => Unsolicited Neighbour Announce
This also fixes the carp IPv6 NA's that stopped working after r251584 which
added the ipv6_route__llma route.
The new behavour can be controlled using the sysctls:
* net.link.ether.inet.arp_on_link
* net.inet6.icmp6.nd6_on_link
Also removed unused param from lagg_port_state and added descriptions for the
sysctls while here.
PR: 156226
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4111
Before r291643, adding new interface prefix had the following logic:
try_add:
EEXIST && (PINNED) {
try_del(w/o PINNED flag)
if (OK)
try_add(PINNED)
}
In r291643, deletion was performed w/ PINNED flag held which leaded
to new interface prefixes (like ::1) overriding older ones.
Fix this by requesting deletion w/o RTF_PINNED.
PR: kern/205285
Submitted by: Fabian Keil <fk at fabiankeil.de>
LLE structure is mostly unchanged during its lifecycle: there are only 2
things relevant for fast path lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we send NS to perform reachability verification instead of expiring entry.
The only signal that is needed from fast path is something like binary
yes/no.
The latter is solved by the following changes:
Special r_skip_req (introduced in D3688) value is used for fast path feedback.
It is read lockless by fast path, but updated under req_mutex mutex. If this
field is non-zero, then fast path will acquire lock and set it back to 0.
After transitioning to STALE state, callout timer is armed to run each
V_nd6_delay seconds to make sure that if packet was transmitted at the start
of given interval, we would be able to switch to PROBE state in V_nd6_delay
seconds as user expects.
(in STALE state) timer is rescheduled until original V_nd6_gctimer expires
keeping lle in STALE state (remaining timer value stored in lle_remtime).
(in STALE state) timer is rescheduled if packet was transmitted less that
V_nd6_delay seconds ago to make sure we transition to PROBE state exactly
after V_n6_delay seconds.
As a result, all packets towards lle in REACHABLE/STALE/PROBE states are handled
by fast path without acquiring lle read lock.
Differential Revision: https://reviews.freebsd.org/D3780
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
LLE structure is mostly unchanged during its lifecycle.
To be more specific, there are 2 things relevant for fast path
lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we re-send arp request to perform reachability verification instead of
expiring entry. The only signal that is needed from fast path is something
like binary yes/no.
The latter is solved by the following changes:
1) introduce special r_skip_req field which is read lockless by fast path,
but updated under (new) req_mutex mutex. If this field is non-zero, then
fast path will acquire lock and set it back to 0.
2) introduce simple state machine: incomplete->reachable<->verify->deleted.
Before that we implicitely had incomplete->reachable->deleted state machine,
with V_arpt_keep between "reachable" and "deleted". Verification was performed
in runtime 5 seconds before V_arpt_keep expire.
This is changed to "change state to verify 5 seconds before V_arpt_keep,
set r_skip_req to non-zero value and check it every second". If the value
is zero - then send arp verification probe.
These changes do not introduce any signifficant control plane overhead:
typically lle callout timer would fire 1 time more each V_arpt_keep (1200s)
for used lles and up to arp_maxtries (5) for dead lles.
As a result, all packets towards "reachable" lle are handled by fast path without
acquiring lle read lock.
Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler
might keep LLE lock for signifficant amount of time, which might not be feasible
for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock).
Differential Revision: https://reviews.freebsd.org/D3688
by filter function instead of picking into routing table details in
each consumer.
Remove now-unused rt_expunge() (eliminating last external RTF_RNH_LOCKED
user).
This simplifies future nexthops/mulitipath changes and rtrequest1_fib()
locking refactoring.
Actual changes:
Add "rt_chain" field to permit rte grouping while doing batched delete
from routing table (thus growing rte 200->208 on amd64).
Add "rti_filter" / "rti_filterdata" / "rti_spare" fields to rt_addrinfo
to pass filter function to various routing subsystems in standard way.
Convert all rt_expunge() customers to new rt_addinfo-based api and eliminate
rt_expunge().
Use hhook(9) framework to achieve ability of loading and unloading
if_enc(4) kernel module. INET and INET6 code on initialization registers
two helper hooks points in the kernel. if_enc(4) module uses these helper
hook points and registers its hooks. IPSEC code uses these hhook points
to call helper hooks implemented in if_enc(4).
new return codes of -1 were mistakenly being considered "true". Callout_stop
now returns -1 to indicate the callout had either already completed or
was not running and 0 to indicate it could not be stopped. Also update
the manual page to make it more consistent no non-zero in the callout_stop
or callout_reset descriptions.
MFC after: 1 Month with associated callout change.
Add net.link.lagg.lacp.default_strict_mode which defines
the default value for LACP strict compliance for created
lagg devices.
Also:
* Add lacp_strict option to ifconfig(8).
* Fix lagg(4) creation examples.
* Minor style(9) fix.
MFC after: 1 week
sysctl and will always be on. The former split between default and
fast forwarding is removed by this commit while preserving the ability
to use all network stack features.
Differential Revision: https://reviews.freebsd.org/D4042
Reviewed by: ae, melifaro, olivier, rwatson
MFC after: 1 month
Sponsored by: Rubicon Communications (Netgate)
IPv4 packets (when it should return FALSE). It happens because PF_ANEQ() doesn't
stop if first 32 bits of IPv4 packets are equal and starts to check next 3*32
bits (like for IPv6 packet). Those bits containt some garbage and in result
PF_ANEQ() wrongly returns TRUE.
Fix: Check if packet is of AF_INET type and if it is then compare only first 32
bits of data.
PR: 204005
Submitted by: Miłosz Kaniewski
In certain configurations (mostly but not exclusively as a VM on Xen) pf
produced packets with an invalid TCP checksum.
The problem was that pf could only handle packets with a full checksum. The
FreeBSD IP stack produces TCP packets with a pseudo-header checksum (only
addresses, length and protocol).
Certain network interfaces expect to see the pseudo-header checksum, so they
end up producing packets with invalid checksums.
To fix this stop calculating the full checksum and teach pf to only update TCP
checksums if TSO is disabled or the change affects the pseudo-header checksum.
PR: 154428, 193579, 198868
Reviewed by: sbruno
MFC after: 1 week
Relnotes: yes
Sponsored by: RootBSD
Differential Revision: https://reviews.freebsd.org/D3779
The remove began with revision r271733.
NOTE: This patch must never be merge to 10-Stable
Reviewed by: glebius
Approved by: bapt (mentor)
Relnotes: Yes
Sponsored by: EuroBSDCon Sweden.
Differential Revision: D3786
Initially function was introduced in r53541 (KAME initial commit) to
"provide hints from upper layer protocols that indicate a connection
is making "forward progress"" (quote from RFC 2461 7.3.1 Reachability
Confirmation).
However, it was converted to do nothing (e.g. just return) in r122922
(tcp_hostcache implementation) back in 2003. Some defines were moved
to tcp_var.h in r169541. Then, it was broken (for non-corner cases)
by r186119 (L2<>L3 split) in 2008 (NULL ifp in nd6_lookup). So,
right now this code is broken and has no "real" base users.
Differential Revision: https://reviews.freebsd.org/D3699
Problem description:
How do we currently perform layer 2 resolution and header imposition:
For IPv4 we have the following chain:
ip_output() -> (ether|atm|whatever)_output() -> arpresolve()
Lookup is done in proper place (link-layer output routine) and it is possible
to provide cached lle data.
For IPv6 situation is more complex:
ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() ->
nd6_storelladdr()
We have ip6_ouput() which calls nd6_output() instead of link output routine.
nd6_output() does the following:
* checks if lle exists, creates it if needed (similar to arpresolve())
* performes lle state transitions (similar to arpresolve())
* calls nd6_output_ifp() which pushes packets to link output routine along
with running SeND/MAC hooks regardless of lle state
(e.g. works as run-hooks placeholder).
After that, iface output routine like ether_output() calls nd6_storelladdr()
which performs lle lookup once again.
As a result, we perform lookup twice for each outgoing packet for most types
of interfaces. We also need to maintain runtime-checked table of 'nd6-free'
interfaces (see nd6_need_cache()).
Fix this behavior by eliminating first ND lookup. To be more specific:
* make all nd6_output() consumers use nd6_output_ifp() instead
* rename nd6_output[_slow]() to nd6_resolve_[slow]()
* convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics,
e.g. copy L2 address to buffer instead of pushing packet towards lower
layers
* Make all nd6_storelladdr() users use nd6_resolve()
* eliminate nd6_storelladdr()
The resulting callchain is the following:
ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve()
Error handling:
Currently sending packet to non-existing la results in ip6_<output|forward>
-> nd6_output() -> nd6_output _lle() which returns 0.
In new scenario packet is propagated to <ether|whatever>_output() ->
nd6_resolve() which will return EWOULDBLOCK, and that result
will be converted to 0.
(And EWOULDBLOCK is actually used by IB/TOE code).
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D1469
* prepare gateway before insertion
* use RTM_CHANGE instead of explicit find/change route
* Remove fib argument from ifa_switch_loopback_route added in r264887:
if old ifp fib differes from new one, that the caller
is doing something wrong
* Make ifa_*_loopback_route call single ifa_maintain_loopback_route().
On receipt of a redirect message, install an interface route for the
redirected destination. On removal of the corresponding Neighbor Cache
entry, remove the interface route.
This requires changes in rtredirect_fib() to cope with an AF_LINK
address for the gateway and with the absence of RTF_GATEWAY.
This fixes the "Redirected On-Link" test cases in the Tahi IPv6 Ready Logo
Phase 2 test suite.
Unrelated to the above, fix a recursion on the radix node head lock
triggered by the Tahi Redirected to Alternate Router test cases.
When I first wrote this patch in October 2012, all Section 2
(Neighbor Discovery) test cases passed on 10-CURRENT, 9-STABLE,
and 8-STABLE. cem@ recently rebased the 10.x patch onto head and reported
that it passes Tahi. (Thanks!)
These other test cases also passed in 2012:
* the RTF_MODIFIED case, with IPv4 and IPv6 (using a
RTF_HOST|RTF_GATEWAY route for the destination)
* the redirected-to-self case, with IPv4 and IPv6
* a valid IPv4 redirect
All testing in 2012 was done with WITNESS and INVARIANTS.
Tested by: EMC / Isilon Storage Division via Conrad Meyer (cem) in 2015,
Mark Kelley <mark_kelley@dell.com> in 2012,
TC Telkamp <terence_telkamp@dell.com> in 2012
PR: 152791
Reviewed by: melifaro (current rev), bz (earlier rev)
Approved by: kib (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D3602
without holding afdata wlock
* convert per-af delete_address callback to global lltable_delete_entry() and
more low-level "delete this lle" per-af callback
* fix some bugs/inconsistencies in IPv4/IPv6 ifscrub procedures
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3573
To make driver programming easier the TSO limits are changed to
reflect the values used in the BUSDMA tag a network adapter driver is
using. The TCP/IP network stack will subtract space for all linklevel
and protocol level headers and ensure that the full mbuf chain passed
to the network adapter fits within the given limits.
Implementation notes:
If a network adapter driver needs to fixup the first mbuf in order to
support VLAN tag insertion, the size of the VLAN tag should be
subtracted from the TSO limit. Else not.
Network adapters which typically inline the complete header mbuf could
technically transmit one more segment. This patch does not implement a
mechanism to recover the last segment for data transmission. It is
believed when sufficiently large mbuf clusters are used, the segment
limit will not be reached and recovering the last segment will not
have any effect.
The current TSO algorithm tries to send MTU-sized packets, where the
MTU typically is 1500 bytes, which gives 1448 bytes of TCP data
payload per packet for IPv4. That means if the TSO length limitiation
is set to 65536 bytes, there will be a data payload remainder of
(65536 - 1500) mod 1448 bytes which is equal to 324 bytes. Trying to
recover total TSO length due to inlining mbuf header data will not
have any effect, because adding or removing the ETH/IP/TCP headers
to or from 324 bytes will not cause more or less TCP payload to be
TSO'ed.
Existing network adapter limits will be updated separately.
Differential Revision: https://reviews.freebsd.org/D3458
Reviewed by: rmacklem
MFC after: 2 weeks
Some places in our network stack already have const
arguments (like if_output() routines and LLE functions).
Code using ifa_ifwith (and similar functins) along with
LLE/_output functions is currently bound to use tricks
like __DECONST(). Provide a cleaner way by making sockaddr
lookup key really constant.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3464
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.
Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.
Reviewed by: gnn, eri
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3466
CoDel is a parameterless queue discipline that handles variable bandwidth
and RTT.
It can be used as the single queue discipline on an interface or as a sub
discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ.
Differential Revision: https://reviews.freebsd.org/D3272
Reviewd by: rpaulo, gnn (previous version)
Obtained from: pfSense
Sponsored by: Rubicon Communications (Netgate)
Before that, the logic besides lle_create() was the following:
return existing if found, create if not. This behaviour was error-prone
since we had to deal with 'sudden' static<>dynamic lle changes.
This commit fixes bunch of different issues like:
- refcount leak when lle is converted to static.
Simple check case:
console 1:
while true;
do for i in `arp -an|awk '$4~/incomp/{print$2}'|tr -d '()'`;
do arp -s $i 00:22:44:66:88:00 ; arp -d $i;
done;
done
console 2:
ping -f any-dead-host-in-L2
console 3:
# watch for memory consumption:
vmstat -m | awk '$1~/lltable/{print$2}'
- possible problems in arptimer() / nd6_timer() when dropping/reacquiring
lock.
New logic explicitly handles use-or-create cases in every lla_create
user. Basically, most of the changes are purely mechanical. However,
we explicitly avoid using existing lle's for interface/static LLE records.
* While here, call lle_event handlers on all real table lle change.
* Create lltable_free_entry() calling existing per-lltable
lle_free_t callback for entry deletion
This permits us having all (not fully true yet) all the info
needed in lookup process in first 64 bytes of 'struct llentry'.
struct llentry layout:
BEFORE:
[rwlock .. state .. state .. MAC ] (lle+1) [sockaddr_in[6]]
AFTER
[ in[6]_addr MAC .. state .. rwlock ]
Currently, address part of struct llentry has only 16 bytes for the key.
However, lltable does not restrict any custom lltable consumers with long
keys use the previous approach (store key at (lle+1)).
Sponsored by: Yandex LLC
* Split lltable_init() into lltable_allocate_htbl() (alloc
hash table with default callbacks) and lltable_link() (
links any lltable to the list).
* Switch from LLTBL_HASHTBL_SIZE to per-lltable hash size field.
* Move lltable setup to separate functions in in[6]_domifattach.
differences between projects/routing and HEAD.
This commit tries to keep code logic the same while changing underlying
code to use unified callbacks.
* Add llt_foreach_entry method to traverse all entries in given llt
* Add llt_dump_entry method to export particular lle entry in sysctl/rtsock
format (code is not indented properly to minimize diff). Will be fixed
in the next commits.
* Add llt_link_entry/llt_unlink_entry methods to link/unlink particular lle.
* Add llt_fill_sa_entry method to export address in the lle to sockaddr
format.
* Add llt_hash method to use in generic hash table support code.
* Add llt_free_entry method which is used in llt_prefix_free code.
* Prepare for fine-grained locking by separating lle unlink and deletion in
lltable_free() and lltable_prefix_free().
* Provide lltable_get<ifp|af>() functions to reduce direct 'struct lltable'
access by external callers.
* Remove @llt agrument from lle_free() lle callback since it was unused.
* Temporarily add L3_CADDR() macro for 'const' sockaddr typecasting.
* Switch to per-af hashing code.
* Rename LLE_FREE_LOCKED() callback from in[6]_lltable_free() to
in_[6]lltable_destroy() to avoid clashing with llt_free_entry() method.
Update description from these functions.
* Use unified lltable_free_entry() function instead of per-af one.
Reviewed by: ae
* Move interface route cleanup to route.c:rt_flushifroutes()
* Convert most of "for (fibnum = 0; fibnum < rt_numfibs; fibnum++)" users
to use new rt_foreach_fib() instead of hand-rolling cycles.
* Move lle creation/deletion from lla_lookup to separate functions:
lla_lookup(LLE_CREATE) -> lla_create
lla_lookup(LLE_DELETE) -> lla_delete
lla_create now returns with LLE_EXCLUSIVE lock for lle.
* Provide typedefs for new/existing lltable callbacks.
Reviewed by: ae
The filter is called from the network hot path and must not sleep.
The filter runs with the descriptor lock held and does not manipulates the
buffers, so it is not necessary sleep when the hold buffer is in use.
Just ignore the hold buffer contents when it is being copied to user space
(when hold buffer in use is set).
This fix the "Sleeping thread owns a non-sleepable lock" panic when the
userland thread is too busy reading the packets from bpf(4).
PR: 200323
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
The first one never triggers because bpf_canfreebuf() can only be true for
zero-copy buffers and zero-copy buffers are not read with read(2).
The second also never triggers, because we check the free buffer before
calling ROTATE_BUFFERS(). If the hold buffer is in use the free buffer
will be NULL and there is nothing else to do besides drop the packet. If
the free buffer isn't NULL the hold buffer _is_ free and it is safe to
rotate the buffers.
Update the comment in ROTATE_BUFFERS macro to match the logic described
here.
While here fix a few typos in comments.
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
The buffer must be allocated (or even changed) before the interface is set
and thus, there is no need to verify if the buffer is in use.
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
the buffer is allocated we are committed to a particular buffer method
(BPF_BUFMODE_BUFFER in this case).
If we are using zero-copy buffers, the userland program must register its
buffers before set the interface.
If we are using kernel memory buffers, we can allocate the buffer at the
time that the interface is being set.
This fix allows the usage of BIOCSETBUFMODE after r235746.
Update the comments to reflect the recent changes.
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
still on going, but it has passed world for mips and powerpc...
I know this has an extra semicolon, but this is the patch that is
tested...
Looks like better fix is to use _Static_assert...
use CTASSERTs now that we have them...
Replace a draft w/ RFC that's over 10 years old.
Note that _AALG and _EALG do not need to match what the IKE daemons
think they should be.. This is part of the KABI... I decided to
renumber AESCTR, but since we've never had working AESCTR mode, I'm
not really breaking anything.. and it shortens a loop by quite
a bit..
remove SKIPJACK IPsec support... SKIPJACK never made it out of draft
(in 1999), only has 80bit key, NIST recommended it stop being used
after 2010, and setkey nor any of the IKE daemons I checked supported
it...
jmgurney/ipsecgcm: a357a33, c75808b, e008669, b27b6d6
Reviewed by: gnn (earlier version)
R_Free(). This matches the other macros and reduces the chances to clash
with other headers.
This also fixes the build of radix.c outside of the kernel environment.
Reviewed by: glebius
ip_encap already has inspected mbuf's data, at least an IP header.
And it is safe to use mtod() and do direct access to needed fields.
Add M_ASSERTPKTHDR() to gif_encapcheck(), since the code expects that
mbuf has a packet header.
Move the code from gif_validate[46] into in[6]_gif_encapcheck(), also
remove "martian filters" checks. According to RFC 4213 it is enough to
verify that the source address is the address of the encapsulator, as
configured on the decapsulator.
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Both are used to protect access to IP addresses lists and they can be
acquired for reading several times per packet. To reduce lock contention
it is better to use rmlock here.
Reviewed by: gnn (previous version)
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3149
- Tweek man page.
- Remove all mention of RANDOM_FORTUNA. If the system owner wants YARROW or DUMMY, they ask for it, otherwise they get FORTUNA.
- Tidy up headers a bit.
- Tidy up declarations a bit.
- Make static in a couple of places where needed.
- Move Yarrow/Fortuna SYSINIT/SYSUNINIT to randomdev.c, moving us towards a single file where the algorithm context is used.
- Get rid of random_*_process_buffer() functions. They were only used in one place each, and are better subsumed into those places.
- Remove *_post_read() functions as they are stubs everywhere.
- Assert against buffer size illegalities.
- Clean up some silly code in the randomdev_read() routine.
- Make the harvesting more consistent.
- Make some requested argument name changes.
- Tidy up and clarify a few comments.
- Make some requested comment changes.
- Make some requested macro changes.
* NOTE: the thing calling itself a 'unit test' is not yet a proper
unit test, but it helps me ensure things work. It may be a proper
unit test at some time in the future, but for now please don't make
any assumptions or hold any expectations.
Differential Revision: https://reviews.freebsd.org/D2025
Approved by: so (/dev/random blanket)
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:
- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)
- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)
- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html
- fix rx CRC handing on ixl
- add module dependencies for netmap when building drivers as modules
- minor simplifications to device-specific routines (*txsync, *rxsync)
- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,
Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).
Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.
MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco
bd_hdrcmplt. As if_loop does not use link-level headers, its behavior
when used by bpfwrite() should be the same regardless of the state of
bd_hdrcmplt. Without this change, libpcap (and other BPF users that
work like it) fail when writing to loopback interfaces.
Differential Revision: https://reviews.freebsd.org/D2989
Reviewed by: gnn, melifaro
Approved by: jmallett (mentor)
MFC after: 3 days
Update setkey and libipsec to understand aes-gcm-16 as an
encryption method.
A partial commit of the work in review D2936.
Submitted by: eri
Reviewed by: jmg
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
vtnet interfaces are always in promiscuous mode (at least if the
VIRTIO_NET_F_CTRL_RX feature is not negotiated with the host). if_promisc() on
a vtnet interface returned ENOTSUP although it has IFF_PROMISC set. This
confused the bridge code. Instead we now accept all enable/disable promiscuous
commands (and always keep IFF_PROMISC set).
There are also two issues with the if_bridge error handling.
If if_promisc() fails it uses bridge_delete_member() to clean up. This tries to
disable promiscuous mode on the interface. That runs into an assert, because
promiscuous mode was never set in the first place. (That's the panic reported in
PR 200210.)
We can only unset promiscuous mode if the interface actually is promiscuous.
This goes against the reference counting done by if_promisc(), but only the
first/last if_promic() calls can actually fail, so this is safe.
A second issue is a double free of bif. It's already freed by
bridge_delete_member().
PR: 200210
Differential Revision: https://reviews.freebsd.org/D2804
Reviewed by: philip (mentor)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
gif(4) interface. Add new option "ignore_source" for gif(4) interface.
When it is enabled, gif's encapcheck function requires match only for
packet's destination address.
Differential Revision: https://reviews.freebsd.org/D2004
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
packets on tunnel interfaces. Add support of these ioctls to gre(4),
gif(4) and me(4) interfaces. For incoming packets M_SETFIB() should use
if_fib value from ifnet structure, use proper value in gre(4) and me(4).
Differential Revision: https://reviews.freebsd.org/D2462
No objection from: #network
MFC after: 2 weeks
Sponsored by: Yandex LLC
since types became a enum C type. Some software uses such ifdefs to
determine whether an operating systems supports certain interface type.
Of course, such check is bogus. E.g. FreeBSD defines about 250 interface
types, but supports only around 20.
However, we need not upset such software so provide a set of defines. The
current set was taken to suffice the dhcpd.
Reported & tested by: Guy Yur <guyyur gmail.com>
to specify exact number of cpus in loader.conf which get annoying when you have
mix of machines which don't have equal number of total cpus. I propose "-1" as
that value. When loader.conf has net.isr.maxthreads = -1, netisr will use all
available cpus.
In collaboration with: davide
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2318
MFC after: 2 weeks
Sponsored by: Limelight Networks
quite unexpected result of toggling capabilities on the neighbour vlan(4)
interfaces.
Reviewed by: melifaro, np
Differential Revision: https://reviews.freebsd.org/D2310
Sponsored by: Nginx, Inc.
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/
Submitted by: Steve Kiernan stevek@juniper.net
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/28
Relnotes: yes
A couple of fields are still exposed via struct bpf_if_ext so that
bpf_peers_present() can be inlined into its callers. However, this change
eliminates some type duplication in the resulting CTF container, since
otherwise ctfmerge(1) propagates the duplication through all types that
contain a struct bpf_if.
Differential Revision: https://reviews.freebsd.org/D2319
Reviewed by: melifaro, rpaulo
dhclient opens bpf as write-only to send packets. It never reads received
packets from that descriptor, but processing them in kernel takes time.
Especially much time takes packet timestamping on systems with expensive
timecounter, such as bhyve guest, where network speed dropped in half.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
discontinued by its initial authors. In FreeBSD the code was already
slightly edited during the pf(4) SMP project. It is about to be edited
more in the projects/ifnet. Moving out of contrib also allows to remove
several hacks to the make glue.
Reviewed by: net@
device polling rather than having it only be controlled by the compile
time option.
Summary: Rubicon Communications (Netgate)
Reviewers: #network, hiren
Reviewed By: #network, hiren
Subscribers: hiren
Differential Revision: https://reviews.freebsd.org/D2258
- Extend the number of available subtypes for Ethernet media by using some
of the ifmedia word's option bits to help denote subtypes. As a result, the
number of possible Ethernet subtype values increases from 31 to 511.
- Use some of those new values to define new media types.
- lacp_compose_key() recgonizes the new Ethernet media types added.
(Change made as required by a comment in if_media.h)
- New ioctl, SIOGIFXMEDIA, to handle getting the new extended media types.
SIOCGIFMEDIA is retained for backwards compatibility.
- Changes to ifconfig to allow it to handle the new extended media types.
Submitted by: mike@karels.net (original), hselasky
Reviewed by: jfvogel, gnn, hselasky
Approved by: jfvogel (mentor), gnn (mentor)
Differential Revision: http://reviews.freebsd.org/D1965
where counter was incremented on parent, instead of vlan(4) interface.
The second is more complicated. Historically, in our stack the incoming
packets are accounted in drivers, while incoming bytes for Ethernet
drivers are accounted in ether_input_internal(). Thus, it should be
removed from vlan(4) driver.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Use ifunit() instead of going through the interface list ourselves.
- Remove unused parameter.
- Move the most important comment above the function.
Sponsored by: Nginx, Inc.
initialization, when no input method specified before if_attach().
This prevents panics when if_input() method called directly e.g.
from bpf(4) code.
PR: 192426
Reviewed by: glebius
MFC after: 1 week
drivers can use it. This avoids some code duplication. Add missing
default case to all switch statements while at it. Also move the
hashing of the IPv6 flow field to layer 4 because the IPv6 flow field
is constant on a per L4 connection basis and not on a per L3 network.
Differential Revision: https://reviews.freebsd.org/D1987
Sponsored by: Mellanox Technologies
MFC after: 1 month
in kern_gzio.c. The old gzio interface was somewhat inflexible and has not
worked properly since r272535: currently, the gzio functions are called with
a range lock held on the output vnode, but kern_gzio.c does not pass the
IO_RANGELOCKED flag to vn_rdwr() calls, resulting in deadlock when vn_rdwr()
attempts to reacquire the range lock. Moreover, the new gzio interface can
be used to implement kernel core compression.
This change also modifies the kernel configuration options needed to enable
userland core dump compression support: gzio is now an option rather than a
device, and the COMPRESS_USER_CORES option is removed. Core dump compression
is enabled using the kern.compress_user_cores sysctl/tunable.
Differential Revision: https://reviews.freebsd.org/D1832
Reviewed by: rpaulo
Discussed with: kib
if_vmove().
In if_vmove(), if_detach_internal() and if_attach_internal() were
called in series to detach and reattach the interface. When
detaching, if_delgroup() was called and the interface leaves all of
the group membership. And then upon attachment, if_addgroup(ifp,
IFG_ALL) was called and it joined only "all" group again.
This had a problem. Normally, a cloned interface automatically joins
a group whose name is ifc_name of the cloner in addition to "all"
upon creation. However, if_vmove() removed the membership and did
not restore upon attachment.
Differential Revision: https://reviews.freebsd.org/D1859
allows adding an vlan interface into a bridge.
Thanks for William Katsak <wkatsak cs rutgers edu> for testing and fixing
an issue in my previous patch draft.
MFC after: 2 weeks
There was a race that bridge_ifdetach() could be called via
ifnet_departure event handler after vnet_bridge_uninit().
PR: 195859
Reported by: Danilo Egea Gondolfo
I edited the original change to retain the use of arc4random() as a seed for
the hashing as a very basic defense against intentional lagg port selection.
The author's original commit message (edited slightly):
sys/net/ieee8023ad_lacp.c
sys/net/if_lagg.c
In lagg_hashmbuf, use the FNV hash instead of the old
hash32_buf. The hash32 family of functions operate one octet
at a time, and when run on a string s of length n, their output
is equivalent to :
----- i=n-1
\
n \ (n-i-1) 32
( seed^ + / 33^ * s[i] ) % 2^
/
----- i=0
The problem is that the last five bytes of input don't get
multiplied by sufficiently many powers of 33 to rollover 2^32.
That means that changing the last few bytes (but obviously not
the very last) of input will always change the value of the
hash by a multiple of 33. In the case of lagg_hashmbuf() with
ipv4 input, the last four bytes are the TCP or UDP port
numbers. Since the output of lagg_hashmbuf is always taken
modulo the port count, and 3 is a common port count for a lagg,
that's bad. It means that the UDP or TCP source port will
never affect which lagg member is selected on a 3-port lagg.
At 10Gbps, I was not able to measure any difference in CPU
consumption between the old and new hash.
Submitted by: asomers (original commit)
Reviewed by: emaste, glebius
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1001723 on 2013/08/28 (original)
1114258 on 2015/01/22 (edit)
very questionable, since it makes vimages more dependent on each other. But
the reason for the backout is that it screwed up shutting down the pf purge
threads, and now kernel immedially panics on pf module unload. Although module
unloading isn't an advertised feature of pf, it is very important for
development process.
I'd like to not backout r276746, since in general it is good. But since it
has introduced numerous build breakages, that later were addressed in
r276841, r276756, r276747, I need to back it out as well. Better replay it
in clean fashion from scratch.
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
Quoting 19 years bpf.4 manual from bpf-1.2a1:
"
(SIOCGIFADDR is obsolete under BSD systems. SIOCGIFCONF should be
used to query link-level addresses.)
"
* SIOCGIFADDR was not imported in NetBSD (bpf.c 1.36) and OpenBSD.
* Last bits (e.g. manpage claiming SIOCGIFADDR exists) was cleaned
from NetBSD via kern/21513 5 years ago,
from OpenBSD via documentation/6352 5 years ago.
r273087. Move all checks from gif_output() into gif_transmit(). Previously
they were checked always, because if_start always called gif_output.
Now gif_transmit() can be called directly from if_bridge() code and we need
do checks here.
PR: 196646
MFC after: 1 week
handle it in arc_output() instead of nd6_storelladdr().
* Remove IFT_ARCNET check from arpresolve() since arc_output() does not
use arpresolve() to handle broadcast/multicast. This check was there
since r84931. It looks like it was not used since r89099 (initial
import of Arcnet support where multicast is handled separately).
* Remove IFT_IEEE1394 case from nd6_storelladdr() since firewire_output()
calles nd6_storelladdr() for unicast addresses only.
* Remove IFT_ARCNET case from nd6_storelladdr() since arc_output() now
handles multicast by itself.
As a result, we have the following pattern: all non-ethernet-style
media have their own multicast map handling inside their appropriate
routines. On the other hand, arpresolve() (and nd6_storelladdr()) which
meant to be 'generic' ones de-facto handles ethernet-only multicast maps.
MFC after: 3 weeks
Split functions that initialize various pf parts into their
vimage parts and global parts.
Since global parts appeared to be only mutex initializations, just
abandon them and use MTX_SYSINIT() instead.
Kill my incorrect VNET_FOREACH() iterator and instead use correct
approach with VNET_SYSINIT().
PR: 194515
Differential Revision: D1309
Submitted by: glebius, Nikos Vassiliadis <nvass@gmx.com>
Reviewed by: trociny, zec, gnn
* Make most of lltable_* methods 'normal' functions instead of inline
* Add lltable_get_<af|ifp>() functions to access given lltable fields
* Temporarily resurrect nd6_lookup() function
use llt_fill_sa_entry() llt method to store lle address in sa.
* Eliminate L3_ADDR macro and either reference IPv4/IPv6 address
directly from lle or use newly-created llt_fill_sa_entry().
* Do not store sockaddr inside arp/ndp lle anymore.
and explicit calls to RTENTRY_FREE_LOCKED()
* Use lltable_prefix_free() in arp_ifscrub to be consistent with nd6.
* Rename <lltable_|llt>_delete function to _delete_addr() to note that
this function is used to external callers. Make this function maintain
its own locking.
* Use lookup/unlink/clear call chain from internal callers instead of
delete_addr.
* Fix LLE_DELETED flag handling
cleanup including unlinking/freeing
* Relax locking in lltable_prefix_free_af/lltable_free
* Do not pass @llt to lle free callback: it is always NULL now.
* Unify arptimer/nd6_llinfo_timer: explicitly unlock lle avoiding
unlock/lock sequinces
* Do not pass unlocked lle to nd6_ns_output(): add nd6_llinfo_get_holdsrc()
to retrieve preferred source address from lle hold queue and pass it
instead of lle.
* Finally, make nd6_create() create and return unlocked lle
* Separate defrtr handling code from nd6_free():
use nd6_check_del_defrtr() to check if we need to keep entry instead of
performing GC,
use nd6_check_recalc_defrtr() to perform actual recalc on lle removal.
* Move isRouter handling from nd6_cache_lladdr() to separate
nd6_check_router()
* Add initial code to maintain lle runtime flags in sync.
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
use rwlock accessible via external functions
(IF_AFDATA_CFG_* -> if_afdata_cfg_*()) for all control plane tasks
use rmlock (IF_AFDATA_RUN_*) for fast-path lookups.
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.
Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.
New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.
route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.
PR: 194238
MFC after: 1 month
CR: D1125
* struct llentry is now basically split into 2 pieces:
all fields within 64 bytes (amd64) are now protected by both
ifdata lock AND lle lock, e.g. you require both locks to be held
exclusively for modification. All data necessary for fast path
operations is kept here. Some fields were added:
- r_l3addr - makes lookup key liev within first 64 bytes.
- r_flags - flags, containing pre-compiled decision whether given
lle contains usable data or not. Current the only flag is RLLE_VALID.
- r_len - prepend data len, currently unused
- r_kick - used to provide feedback to control plane (see below).
All other fields are protected by lle lock.
* Add simple state machine for ARP to handle "about to expire" case:
Current model (for the fast path) is the following:
- rlock afdata
- find / rlock rte
- runlock afdata
- see if "expire time" is approaching
(time_uptime + la->la_preempt > la->la_expire)
- if true, call arprequest() and decrease la_preempt
- store MAC and runlock rte
New model (data plane):
- rlock afdata
- find rte
- check if it can be used using r_* fields only
- if true, store MAC
- if r_kick field != 0 set it to 0.
- runlock afdata
New mode (control plane):
- schedule arptimer to be called in (V_arpt_keep - V_arp_maxtries)
seconds instead of V_arpt_keep.
- on first timer invocation change state from ARP_LLINFO_REACHABLE
to ARP_LLINFO_VERIFY, sets r_kick to 1 and shedules next call in
V_arpt_rexmit (default to 1 sec).
- on subsequent timer invocations in ARP_LLINFO_VERIFY state, checks
for r_kick value: reschedule if not changed, and send arprequest()
if set to zero (e.g. entry was used).
* Convert IPv4 path to use new single-lock approach. IPv6 bits to follow.
* Slow down in_arpinput(): now valid reply will (in most cases) require
acquiring afdata WLOCK twice. This is requirement for storing changed
lle data. This change will be slightly optimized in future.
* Provide explicit hash link/unlink functions for both ipv4/ipv6 code.
This will probably be moved to generic lle code once we have per-AF
hashing callback inside lltable.
* Perform lle unlink on deletion immediately instead of delaying it to
the timer routine.
* Make r244183 more explicit: use new LLE_CALLOUTREF flag to indicate the
presence of lle reference used for safe callout calls.
lla_lookup(LLE_CREATE) -> lla_create
lla_lookup(LLE_DELETE) -> lla_delete
Assume lla_create to return LLE_EXCLUSIVE lock for lle.
* Rework lla_rt_output to perform all lle changes under afdata WLOCK.
* change arp_ifscrub() ackquire afdata WLOCK, the same as arp_ifinit().
