directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
How network VF works with hn(4) on Hyper-V in non-transparent mode:
- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
address.
- Once the network VF is up, e.g. ifconfig VF up:
o All of the transmission should go through the network VF.
o Most of the reception goes through the network VF.
o Small amount of reception may go through the cooresponding hn(4).
This reception will happen, even if the the cooresponding hn(4) is
down. The cooresponding hn(4) will change the reception interface
to the network VF, so that network layer and application layer will
be tricked into thinking that these packets were received by the
network VF.
o The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
o All of the transmission should go through the cooresponding hn(4).
o All of the reception goes through the cooresponding hn(4).
o The cooresponding hn(4) fallbacks to the original physical link
detection logic.
All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off. In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.
To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11635
Use the standard syntax of name@version, I do not expect a confusion
due to unlikely possibility of the name containing the '@' character.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Rtld checks and use old MAP_ANON/PROT_NONE method of creating gap if
running on old kernel.
Reviewed by: alc, markj
Tested by: pho, Qualys
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This hopefully will make atf-sh(3) easier to understand for newcomers,
without having to go through the atf-sh(3) level of indirection.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
I missed the fact that atf-sh(3) already documents atf_check(3). I'll
be adding an manpage link for that instead in the next commit.
MFC after: 1 week
MFC with: r319659
Sponsored by: Dell EMC Isilon
This is being done to make the documentation for atf-check(1) easier to find/more
intuitive for new users, because atf_check is the atf-run(1) shell version of the
standalone atf-check(1) command, which is used in atf-sh(3) test programs.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Reviewed by: emaste, jonathan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10826
Fix warnings about redundant declarations in rtld
when libthr in increased to WARNS=6.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10934
When I originally documented the LD_LIBRARY_PATH_FDS environment variable,
I used `.Ev` rather than `.It Ev` to introduce it; this led to the
documentation being embedded in the previous paragraph (LD_LIBRARY_PATH).
When executing rtld directly, allow a file descriptor to be explicitly
specified rather than opened from the given path. This, together with the
LD_LIBRARY_PATH_FDS environment variable, allows dynamically-linked
applications to be executed from within capability mode.
Also add some rudimentary argument parsing (without pulling in getopt or
the like) to accept this file descriptor, a help (-h) option and a basic
usage string.
Reviewed by: kib
Sponsored by: NSERC, RDC
Differential Revision: https://reviews.freebsd.org/D10751
Do not allow direct exec if we the process is suid. Try to follow Unix
permission checks for DACs, ignore ACLs.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10750
This is a more accurate name, as the integer doesn't have to be a library
directory descriptor. It is also a prerequisite for more argument parsing
coming in the near future (e.g., parsing explicit binary descriptors).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: NSERC
Check if passed phdr is actually phdr of the interpreter itself, and
decide that this is the case of direct execution. In this case, the
binary to activate is specified in the argv[1]. After opening it,
shift down on-stack structure with argv, env and aux vectors to
emulate execution of the binary and not of the interpreter.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10701
If the mapped object is linked at specific address, we must obey it.
If AT_EXECFD is not used, only in-kernel ELF image activator needed to
keep the mapping address, since only binaries are linked at the fixed
address, and binaries are mapped by kernel in this case.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D10701
partially sort them by style(9). Move locals declarations from nested
blocks into the block at function start.
Discussed with: emaste
MFC after: 1 week
The locally declared enum of blacklistd actions needs to be
hidden when the soon to be committed changes to libblacklist
are brought into the tree. Fix the type of the "msg" parameter
to match the library.
There should be no functional changes.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
locally defined K&R prototypes in .c files; use appropriate casts for
pointer types now that types for arguments are available at compile time.
This ensures that compilers with multiple incompatible calling conventions
can select the correct calling convention for external functions.
Sponsored by: DARPA, AFRL
MFC after: 1 week
Implement a new init(8) option in /etc/ttys. If this option is present
on the entry in /etc/ttys, the entry will be active if and only if it
exists. If the name starts with a '/', it will be considered an
absolute path. If not, it will be a path relative to /dev.
This allows one to turn off video console getty that aren't present
(while running a getty on them even when they aren't the system
console). Likewise with serial ports.
It differs from onifconsole in only requiring the device exist rather
than it be listed as one of the system consoles.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10037
From the manpage:
When set to a nonempty string, prevents modifications of the PLT slots
when doing bindings. As result, each call of the PLT-resolved
function is resolved. In combination with debug output, this provides
complete account of all bind actions at runtime.
Same feature exists on Linux and Solaris.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When dlclose(3) unloads an object with filtees, it recursively calls
dlclose(3) on each filtee in free_needed_filtees(). Introduce
dlclose_locked() helper, called from free_needed_filtees() instead of
dlclose(), and pass the bind lockstate down to avoid recursing.
Reported and tested by: jhibbits
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The MIPS ABI does not require the second GOT entry to be reserved for use
by the runtime linker as on other architectures. Instead, static linkers
use a special value in the second GOT entry to indicate if the entry is
reserved. This value is supposed to consist of an address with the MSB
set and the rest of the bits all zero which is an invalid user address.
However, the old binutils currently in the tree uses the 32-bit mask value
(2^31) on 64-bit MIPS instead of 2^63. This was fixed in upstream
binutils in 2008 to use 2^63 on 64-bit MIPS.
The first part of this change changes the runtime check in init_pltgot()
to check for both values (2^31 and 2^63) when deciding whether to store
the current object pointer in GOT[1] which fixes dynamic N64 binaries
compiled with modern binutils.
However, the initial version of this fix exposed another related bug in
that _rtld_relocate_nonplt_self() was only checking for the new value
(2^63) in GOT[1] and incorrectly treated GOT[1] as a local GOT entry
(and did not relocate the final local GOT entry). To handle this, fix
all of the places that check for GOT[1]'s status to use the same macro
that checks for both values on N64.
Reviewed by: kan, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D9708
Protected symbol reference in GOT of the defining object must be
resolved to itself, same as -Bsymbolic globally.
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9317
There is one capability explicitly documented in gettytab(5) as stupid: he.
And it is indeed. It was meant to facilitate system hostname modification,
but is hardly usable in practice because it allows very limited editing
(e.g., it depends on a particular hostname length, making it non-generic).
Replace it with simple implementation that treats ``he'' as POSIX extended
regular expression which is matched against the hostname. If there are no
parenthesized subexpressions in the pattern, entire matched string is used
as the final hostname. Otherwise, use the first matched subexpression.
If the pattern does not match, the original hostname is not modified.
Using regex(3) gives more freedom, does not complicate the code very much,
and makes a lot more sense, in turn making ``he'' less stupid and actually
useful (e.g., it is now possible to obtain node or domain names from the
original hostname string, without knowing it in advance).
Reviewed by: jilles, manpages (wblock)
Approved by: jilles (implied)
Differential Revision: https://reviews.freebsd.org/D9244
The duplicate call to store_ptr() was added in r204687, but it should
have no effect as it only stores an Elf_Sword and the later store_ptr()
does a write that is at least as large if not larger.
Reviewed by: jmallett
Obtained from: CheriBSD (sort of)
Sponsored by: DARPA / AFRL
both the plt and non-plt case.
This fixes an issue where libraries built with LLD can fail with
"Unhandled relocation 1031"
PR: 214971
Obtained from: 1 week
Sponsored by: DARPA, AFRL
On rela architectures GNU BFD ld and gold store the relocation addend
in GOT entries (in addition to the relocation's r_addend field).
rtld previously relied on this to access its own _DYNAMIC symbol in
order to apply its own relocations.
However, recording addends in the GOT is not specified by the ABI,
and some versions of LLVM's LLD linker leave the GOT uninitialized on
rela architectures.
BFD ld does not populate the GOT on sparc64, and sparc64 rtld has a
machine-dependent rtld_dynamic_addr() function that returns the
_DYNAMIC address. Use the same approach on amd64, obtaining the %rip-
relative _DYNAMIC address following a suggestion from Rafael Espíndola.
Architectures other than amd64 should be addressed in future work.
PR: 214972
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9180
until copy relocations are done.
Newer binutils and lld seems to output copy into relro-protected range.
Reported by: Rafael Espц╜ndola via emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Obtaining compat rtld lock in write mode sets process signal mask to
block all signals. Previous mask is stored in the global variable
oldsigmask. If a lock is write-locked while another lock is already
write-locked, oldsigmask is overwritten by the total mask and on the
last unlock, all signals except traps appear to be blocked.
Fix this by counting the write-lock nested level, and only storing to
oldsigmask/restoring from it at the outermost level.
Masking signals disables involuntary preemption for libc_r, and there
could be no voluntary context switches in the locked code
(dl_iterate_phdr(3) keeps a lock around user callback, but it was
added long after libc_r was renounced). Due to this, remembering the
level in the global variable after the lock is obtained should be
safe, because no two libc_r threads can acquire different write locks
in parallel.
PR: 215826
Reported by: kami
Tested by: yamagi@yamagi.org (previous version)
To be reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Pass the correct object to unload_filtees().
- Use a marker to restart iteration after unload_filtees() has returned.
It calls dlclose() and may recursively remove entries from the global
object list, so TAILQ_FOREACH_SAFE is not sufficient.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
rtld drops the bind lock to call fini functions in an object prior to
unmapping it. The new "doomed" state flag prevents the acquisition of new
references for an object while the lock is dropped.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Add a transient reference count to ensure that the phdr argument to the
callback remains valid while the bind lock is dropped.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This avoids a race with readers such as dladdr(3)/dlinfo(3)/dlsym(3) and
the atexit(3) handler. This race was introduced in r294373.
Reviewed by: markj, kib, kan
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
rtld-elf has some vestigial support for building as a static executable.
r45501 introduced a partial implementation with a prescient note that it
"might never be enabled." r153515 introduced ELF symbol versioning
support, and removed part of the unused build infrastructure for static
rtld.
GNU ld populates rela relocation addends and GOT entries with the same
values, and rtld's run-time dynamic executable check relied on this.
Alternate toolchains may not populate the GOT entries, which caused
RTLD_IS_DYNAMIC to return false. Simplify rtld by just removing the
unused check.
If we want to restore static rtld support later on we ought to introduce
a build-time #ifdef flag.
PR: 214972
Reviewed by: kan
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8687
MIPS does not use the common _rtld_bind() to handle runtime binding.
Instead, it uses a private _mips_rtld_bind(). Update _mips_rtld_bind()
to include the changes made to _rtld_bind() in r216695 and r218476 to
support upgrading the read-locked rtld_bind_lock to a write lock when
an object with a filter is encountered.
While here, add a 'where' variable to track the location of the fixup
in the GOT to make the code flow more closely match _rtld_bind().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D8625
(hopefully) stock gcc 4.2.1 on i386 and other arches.
In particular:
- Do not use %ebx in the asm constraints on i386, since rtld is
compiled with -fPIC and gcc cannot handle GOT-base register reload
(clang and newer gcc can).
- Avoid direct use of [static N] construct in the function
declaration/definion. In-tree gcc was patched to support this, but
stock 4.2.1 cannot handle the feature.
Requested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
CPUID[7].%ebx (cpu_stdext_feature), %ecx (cpu_stdext_feature2) to the
ifunc resolvers on x86.
It is much more clean to use CPUID instruction in usermode to retrieve
this information than to pass AT_HWCAP aux vector from kernel, on
x86. Still, the change does allow for use of AT_HWCAP on arches where it is
needed, by passing aux array to ifunc_init() initializer which should
prepare arguments for ifunc resolvers.
Current signature for resolvers on x86 is
func_t iresolve(uint32_t cpu_feature, uint32_t cpu_feature2,
uint32_t cpu_stdext_feature, uint32_t cpu_stdext_feature2);
where arguments have identical meaning as the kernel variables of the
same name. The ABIs allow to use resolvers with the void or shortened
list of arguments.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8448
When symbol versioning was added to rtld, the boolean 'in_plt' argument
to find_symdef() was converted to a bitmask of flags. The first flag
added was 'SYMLOOK_IN_PLT' which replaced the 'in_plt' bool. This
happened to still work by accident as SYMLOOK_IN_PLT had the value of 1
which is the same as 'true', so there should be no functional change.
Tested on: amd64
Reviewed by: kan
MFC after: 2 weeks
Sponsored by: DARPA / AFRL
Enhance blacklistd support to not log anything by default,
unless blacklistd support is enabled on the command line.
Document new flag in man page, cleanup patches to be less
intrusive in code.
Reported by: Rick Adams
Reviewed by: cem, emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8374
=v is some ye olde gcc "use this specific register as the temp register"
thing that they've deprecated and clang/llvm doesn't implement.
Poked again and again by: sbruno
Most important change being:
dma - Fix security hole (#46)
Affecting DragonFly 4.6 and earlier, Matt Dillon fixed this in base after
finding out from BSDNow Episode 152. Comments following were from his commit
which explains better than I. Just taking his change and putting it here as well.
* dma makes an age-old mistake of not properly checking whether a file
owned by a user is a symlink or not, a bug which the original mail.local
also had.
* Add O_NOFOLLOW to disallow symlinks.
Thanks-to: BSDNow Episode 152, made me dive dma to check when they talked
about the mail.local bug.
MFC After: 2 days
This work, originally from Stacey Son, uses the MIPS UserReg for
reading the TLS data, and will fall back to the normal syscall path
when it isn't supported.
This code dynamically patches cpu_switch() to bypass the UserReg
instruction so to avoid generating a machine exception.
Thanks to sson for the original work, and to Dan Nelson for
bringing it to date and testing it on MIPS32 with me.
Tested:
* mips64 (sson)
* mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support
* mips24k (adrian) - AR9331 SoC, no UserReg support
Obtained from: sson, dnelson_1901@yahoo.com
The root of the problem here is that TAILQ_FOREACH_FROM will default to
the head of the list if passed NULL, which will be the case if there are
no libraries loaded after this one. Thus all libraries, including the
current, were iterated in that case rather than none.
This was broken in r294373.
Reviewed by: markj (earlier version), cem, kib, ngie
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7216
The dependency is needed in PROG_FULL since only the build of PROG_FULL
is using the LDFLAGS and depending on VERSION_MAP. This was not a problem
with MK_DEBUG_FILES==no since it only builds PROG.
This should probably be using bsd.lib.mk instead [1]
Reported by: swills, gjb
Reviewed by: emaste
Noted by: rgrimes [1]
Sponsored by: EMC / Isilon Storage Division
Approved by: re (kib)
The ftp daemon dups the control socket to stdin and uses that fd
throughout the code. Clarify this usage slightly by changing from
explicit use of "0" for the fd to a variable, to make it clear what
the zero represents in the non-blacklist code. Make the
blacklist_notify routine use STDIN_FILENO so as to have less of a
"magic number" feel to the code.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6716
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.
This seems to be related to the previously-reported issues
with files within /etc in the past.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
Check that the dirlist path string specification does not cause
overflow and is fully contained in the hints file.
Check that the dirlist string is nul-terminated.
Make 'hdr' static variable, so that hdr.dirlistlen is available when
hints cached value is used on next function calls. Reset hdr.dirlistlen
to zero if error was detected, so that allocations use reasonable size.
Use 'hints', and not 'p' in the body, since p is only initialized on the
first call.
Reported and reviewed by: truckman (previous version)
Sponsored by: The FreeBSD Foundation
CIDs: 1006503, 1006504, 1006676, 1008488, 1007263
MFC after: 2 weeks
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
