o Modify ipfw(8) to be able set any prefix6 not just Well-Known,
and also show configured prefix6;
o relocate some definitions and macros into proper place;
o convert nat64_debug and nat64_allow_private variables to be
VNET-compatible;
o add struct nat64_config that keeps generic configuration needed
to NAT64 code;
o add nat64_check_prefix6() function to check validness of specified
by user IPv6 prefix according to RFC6052;
o use nat64_check_private_ip4() and nat64_embed_ip4() functions
instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows
to use any configured IPv6 prefixes that are allowed by RFC6052;
o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is
Well-Known IPv6 prefix. It is used to reduce overhead to check this;
o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config
structure. And respectivelly modify the rest of code;
o remove now unused ro argument from nat64_output() function;
o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions;
o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile
as example.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
given mbuf is considered as not matched.
If mbuf was consumed or freed during handling, we must return
IP_FW_DENY, since ipfw's pfil handler ipfw_check_packet() expects
IP_FW_DENY when mbuf pointer is NULL. This fixes KASSERT panics
when NAT64 is used with INVARIANTS. Also remove unused nomatch_final
field from struct nat64lsn_cfg.
Reported by: Justin Holcomb <justin at justinholcomb dot me>
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
pf ioctls frequently take a variable number of elements as argument. This can
potentially allow users to request very large allocations. These will fail,
but even a failing M_NOWAIT might tie up resources and result in concurrent
M_WAITOK allocations entering vm_wait and inducing reclamation of caches.
Limit these ioctls to what should be a reasonable value, but allow users to
tune it should they need to.
Differential Revision: https://reviews.freebsd.org/D15018
Ensure that multiplications for memory allocations cannot overflow, and
that we'll not try to allocate M_WAITOK for potentially overly large
allocations.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
There's no obvious limit to the request size for these, so we limit the
requests to something which won't overflow. Change the memory allocation
to M_NOWAIT so excessive requests will fail rather than stall forever.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
Limit the allocation to required size (or the user allocation, if that's
smaller). That does mean we need to do the allocation with the rules
lock held (so the number doesn't change while we're doing this), so it
can't M_WAITOK.
MFC after: 1 week
The DIOCRADDTABLES and DIOCRDELTABLES ioctls can process a number of
tables at a time, and as such try to allocate <number of tables> *
sizeof(struct pfr_table). This multiplication can overflow. Thanks to
mallocarray() this is not exploitable, but an overflow does panic the
system.
Arbitrarily limit this to 65535 tables. pfctl only ever processes one
table at a time, so it presents no issues there.
MFC after: 1 week
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
If a user attempts to add two tables with the same name the duplicate table
will not be added, but we forgot to free the duplicate table, leaking memory.
Ensure we free the duplicate table in the error path.
Reported by: Coverity
CID: 1382111
MFC after: 3 weeks
ip_reass() expects IPv4 packet and will just corrupt any IPv6 packets
that it gets. Until proper IPv6 fragments handling function will be
implemented, pass IPv6 packets to next rule.
PR: 170604
MFC after: 1 week
If the user configures a states_hashsize or source_nodes_hashsize value we may
not have enough memory to allocate this. This used to lock up pf, because these
allocations used M_WAITOK.
Cope with this by attempting the allocation with M_NOWAIT and falling back to
the default sizes (with M_WAITOK) if these fail.
PR: 209475
Submitted by: Fehmi Noyan Isi <fnoyanisi AT yahoo.com>
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14367
o added struct ipfw_dyn_info that keeps all needed for ipfw_chk and
for dynamic states implementation information;
o added DYN_LOOKUP_NEEDED() macro that can be used to determine the
need of new lookup of dynamic states;
o ipfw_dyn_rule now becomes obsolete. Currently it used to pass
information from kernel to userland only.
o IPv4 and IPv6 states now described by different structures
dyn_ipv4_state and dyn_ipv6_state;
o IPv6 scope zones support is added;
o ipfw(4) now depends from Concurrency Kit;
o states are linked with "entry" field using CK_SLIST. This allows
lockless lookup and protected by mutex modifications.
o the "expired" SLIST field is used for states expiring.
o struct dyn_data is used to keep generic information for both IPv4
and IPv6;
o struct dyn_parent is used to keep O_LIMIT_PARENT information;
o IPv4 and IPv6 states are stored in different hash tables;
o O_LIMIT_PARENT states now are kept separately from O_LIMIT and
O_KEEP_STATE states;
o per-cpu dyn_hp pointers are used to implement hazard pointers and they
prevent freeing states that are locklessly used by lookup threads;
o mutexes to protect modification of lists in hash tables now kept in
separate arrays. 65535 limit to maximum number of hash buckets now
removed.
o Separate lookup and install functions added for IPv4 and IPv6 states
and for parent states.
o By default now is used Jenkinks hash function.
Obtained from: Yandex LLC
MFC after: 42 days
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D12685
When INVARIANTS is not set the 'last' variable is not used, which can generate
compiler warnings.
If this invariant is ever violated it'd result in a KASSERT failure in
refcount_release(), so this one is not strictly required.
specified in the arg1 into ICMPv6 destination unreachable code according
to RFC7915.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
pf_unlink_state() releases a reference to the state without checking if
this is the last reference. It can't be, because pf_state_insert()
initialises it to two. KASSERT() that this is always the case.
CID: 1347140
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Now it is possible to use UDPLite's port numbers in rules,
create dynamic states for UDPLite packets and see "UDPLite" for matched
packets in log.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
pfioctl() handles several ioctl that takes variable length input, these
include:
- DIOCRADDTABLES
- DIOCRDELTABLES
- DIOCRGETTABLES
- DIOCRGETTSTATS
- DIOCRCLRTSTATS
- DIOCRSETTFLAGS
All of them take a pfioc_table struct as input from userland. One of
its elements (pfrio_size) is used in a buffer length calculation.
The calculation contains an integer overflow which if triggered can lead
to out of bound reads and writes later on.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
This is similar to the TCP case. where a TCP RST segment can be sent.
There is one limitation: When sending an ABORT in response to an incoming
packet, it should be tested if there is no ABORT chunk in the received
packet. Currently, it is only checked if the first chunk is an ABORT
chunk to avoid parsing the whole packet, which could result in a DOS attack.
Thanks to Timo Voelker for helping me to test this patch.
Reviewed by: bcr@ (man page part), ae@ (generic, non-SCTP part)
Differential Revision: https://reviews.freebsd.org/D13239
Hide the locking logic used in the dynamic states implementation from
generic code. Rename ipfw_install_state() and ipfw_lookup_dyn_rule()
function to have similar names: ipfw_dyn_install_state() and
ipfw_dyn_lookup_state(). Move dynamic rule counters updating to the
ipfw_dyn_lookup_state() function. Now this function return NULL when
there is no state and pointer to the parent rule when state is found.
Thus now there is no need to return pointer to dynamic rule, and no need
to hold bucket lock for this state. Remove ipfw_dyn_unlock() function.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11657
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Do not invoke IPv4 NAT handler for non IPv4 packets. Libalias expects
a packet is IPv4. And in case when it is IPv6, it just translates them
as IPv4. This leads to corruption and in some cases to panics.
In particular a panic can happen when value of ip6_plen modified to
something that leads to IP fragmentation, but actual packet length does
not match the IP length.
Packets that are not IPv4 will be dropped by NAT rule.
Reported by: Viktor Dukhovni <freebsd at dukhovni dot org>
MFC after: 1 week
IPsec support can be loaded as kernel module, thus do not depend from
kernel option IPSEC and always build O_IPSEC opcode implementation as
enabled.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
fq_pie schedulers packet classification functions in layer2 (bridge mode).
Dummynet AQM packet marking function ecn_mark() and fq_codel/fq_pie
schedulers packet classification functions (fq_codel_classify_flow()
and fq_pie_classify_flow()) assume mbuf is pointing at L3 (IP)
packet. However, this assumption is incorrect if ipfw/dummynet is
used to manage layer2 traffic (bridge mode) since mbuf will point
at L2 frame. This patch solves this problem by identifying the
source of the frame/packet (L2 or L3) and adding ETHER_HDR_LEN
offset when converting an mbuf pointer to ip pointer if the traffic
is from layer2. More specifically, in dummynet packet tagging
function, tag_mbuf(), iphdr_off is set to ETHER_HDR_LEN if the
traffic is from layer2 and set to zero otherwise. Whenever an access
to IP header is required, mtodo(m, dn_tag_get(m)->iphdr_off) is
used instead of mtod(m, struct ip *) to correctly convert mbuf
pointer to ip pointer in both L2 and L3 traffic.
Submitted by: lstewart
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12506
To properly handle 'fwd tablearg,port' opcode, copy sin_port value from
sockaddr_in structure stored in the opcode into corresponding hopstore
field.
PR: 222953
MFC after: 1 week
Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of packets flow.
When we create new named object, there are not yet any rules, that
references it, thus holding IPFW_UH_WLOCK is enough to safely update
needed structures. When we destroy an object, we do this only when its
reference counter becomes zero. And it is safe to not acquire IPFW_WLOCK,
because noone references it. The another case is when we failed to finish
some action and thus we are doing rollback and destroying an object, in
this case it is still not referenced by rules and no need to acquire
IPFW_WLOCK.
This also fixes panic with INVARIANTS due to recursive IPFW_WLOCK acquiring.
MFC after: 1 week
Sponsored by: Yandex LLC
This is an import of Alexander Bluhm's OpenBSD commit r1.60,
the first chunk had to be modified because on OpenBSD the
'cut' declaration is located elsewhere.
Upstream report by Jingmin Zhou:
https://marc.info/?l=openbsd-pf&m=150020133510896&w=2
OpenBSD commit message:
Use a 32 bit variable to detect integer overflow when searching for
an unused nat port. Prevents a possible endless loop if high port
is 65535 or low port is 0.
report and analysis Jingmin Zhou; OK sashan@ visa@
Quoted from: https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/net/pf_lb.c
PR: 221201
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: OpenBSD via ElectroBSD
MFC after: 1 week
