This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
r238211:
Support TARGET_ARCH=armv6 and TARGET_ARCH=armv6eb
This adds a new TARGET_ARCH for building on ARM
processors that support the ARMv6K multiprocessor
extensions. In particular, these processors have
better support for TLS and mutex operations.
This mostly touches a lot of Makefiles to extend
existing patterns for inferring CPUARCH from ARCH.
It also configures:
* GCC to default to arm1176jz-s
* GCC to predefine __FreeBSD_ARCH_armv6__
* gas to default to ARM_ARCH_V6K
* uname -p to return 'armv6'
* make so that MACHINE_ARCH defaults to 'armv6'
It also changes a number of headers to use
the compiler __ARM_ARCH_XXX__ macros to configure
processor-specific support routines.
Submitted by: Tim Kientzle <kientzle@freebsd.org>
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
x86 CPU support, better support for powerpc64, some new directives, and
many other things. Bump __FreeBSD_version, and add a note to UPDATING.
Thanks to the many people that have helped to test this.
Obtained from: projects/binutils-2.17
These changes are needed to fix n32 compile after the recent change of
mips n32 MACHINE_ARCH to mipsn32eb/mipsn32el.
Reviewed by: imp, bz (earlier version)
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
it exists in order to allow arch-specific overrides. This fixes the
binutils (and world) build on powerpc64 after recent TBEMD merges.
Reviewed by: imp
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).
TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.
Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.
UPDATING information will be forthcoming. Any remaining rough edges
will be hammered out in -current.
o) Add TARGET_ABI to the MIPS toolchain build process. This sets the default
ABI to one of o32, n32 or n64. If it is not set, o32 is assumed as that is
the current default.
o) Set the default GCC cpu type to any specified TARGET_CPUTYPE. This is
necessary to have a working "cc" if e.g. mips64 is specified, as binutils
will refuse to link objects using different ISAs in some cases.
o) Add support for n32 and n64 ABIs to binutils and GCC.
o) Add additional required libgcc2 stubs for n32 and n64.
o) Add support for the "mips64r2" architecture to GCC. Add the "octeon"
o) When static linking, wrap default libraries in --start-group and
--end-group. This is required for static linking to work on n64 with the
interdependencies between libraries there. This is what other OSes that
support n64 seem to do, as well.
o) Fix our GCC spec to define __mips64 for 64-bit targets, not __mips64__, the
former being what libgcc, etc., check and the latter seemingly being a
misspelling of a hand merge from a Linux spec.
o) When no TARGET_CPUTYPE is specified at build time, make GCC take the default
ISA from the ABI. Our old defaults were too liberal and assumed that 64-bit
ABIs should default to the MIPS64 ISA and that 32-bit ABIs should default to
the MIPS32 ISA, when we are supporting or will support some systems based on
earlier 32-bit and 64-bit ISAs, most notably MIPS-III.
o) Merge a new opcode file (and support code) from a later version of binutils
and add flags and code necessary to support Octeon-specific instructions.
This should also make merging opcodes for other modern architectures easier.
Reviewed by: imp
Only PowerPC supports both 32-bit and 64-bit targets and the
BFD_DEFAULT_TARGET_SIZE is used by the binutils code to reflect
the preferred ABI. We define BFD_DEFAULT_TARGET_SIZE for all
platforms, but based on the build machine. As such 64-bit build
machines defined BFD_DEFAULT_TARGET_SIZE incorrectly for 32-bit
targets, but since this only affects PowerPC it went unnoticed
for a long time.
The fix is to define BFD_DEFAULT_TARGET_SIZE based on the target
architecture.
PR: amd64/102996
MFC after: 1 month
This includes removing all vestiges of the old not-really supported
ability to build cross tools targeting non-FreeBSD systems, such as
m68k Lynx and NetBSD. Move as much duplicated code from platform
Makefiles into the shared Makefiles. Add a simple mechanism for
specifying ELF 'ldscripts'. Also share as many .h files as possible
(now a single bfd.h vs. one per platform).
Use WARNS?= instead of WARNS=
For this to work properly for all part is the subdirectories
the WARNS assignments in Makefile.inc0 are moved to the correspondning
Makefile.inc.
Approved by: obrien (binutils maintainer)
Tested by: make universe
Presumably the issue was with arparse.[ch]. Those are now in FREEBSD-Xlist
and FREEBSD-deletelist. So we do not import the Bison produced files that
was causing the problem.
Submitted by: ru
The target machine is represented by TARGET_ARCH. MACHINE_ARCH always
represents the host machine. When TARGET_ARCH is not defined, it is
assumed to be equal to MACHINE_ARCH. This means that we're building a
native toolset by default. We're creating cross-compilation tools when
MACHINE_ARCH != TARGET_ARCH.
TARGET_ARCH is defined when building binutils as part of the bootstrap
build and is set to reflect the architecture we're currently cross-
building. With this change binutils is ready for cross-building.
Allow for the case where the host architecture might also be listed
in CROSS_ARCH, so don't do things twice. This situation can arise if you
want NT support in binutils (CROSS_ARCH=i386 CROSS_FORMAT=winnt).
Unlike the unisex architecutres we've had so far, mips is bisexual.
These tools can produce either byte sex, and the compiler/make
determines the proper gender to use. Otherwise, we'd have to have had
mipsel and mipseb in all the places that we have just mips. And there
are other complications with doing that (binutils doesn't like to
build mips tools without both byte genders, it seems).
Introduced BINUTIL_ARCH so that other bisexual architectures can a
generic mechanism.
We cannot just define MACHINE_ARCH as mips because we need to
differentiate big and little endian types of binaries. Discussions on
freebsd-arch have hashed out this issue (and the parallel libc
issues). NetBSD is moving towards mipsel and mipseb for their two
flavors of mips ports (in time for 1.4, if this change hasn't already
been accomplished).
I've been building i386 worlds with this tree for a three months with
these files in place with no ill effects.
