- In case the parent is bge(4), don't set the Jumbo frame settings unless
the MAC actually is Jumbo capable as otherwise the PHY might not have the
corresponding registers implemented. This is also in line with what the
Linux tg3 driver does.
PR: 165032
Submitted by: Alexander Milanov
Obtained from: OpenBSD
MFC after: 3 days
process. Normally it will cause the child to exit followed by the
termination of the supervisor after removing the pidfile.
This looks like desirable behavior, because termination of a
supervisor usually supposes termination of its charge. Also it will
fix the issue with stale pid files after reboot due to init kills a
supervisor before its child exits.
MFC after: 2 weeks
not to leak the descriptor after exec(3). This raises the issue for
daemon(3) of the pidfile lock to be lost when the child process
executes.
To solve this and also to have the pidfile cleaned up when the program
exits, if a pidfile is specified, spawn a child to exec the command
and wait in the parent keeping the pidfile locked until the child
process exits and remove the file.
Reported by: Andrey Zonov <andrey zonov org>
Suggested by: pjd
Reviewed by: pjd
MFC after: 2 weeks
hold the lock.
This is part of my series of work to try and capture when net80211
locking isn't.
ObNote: it'd be nice to be able to mark a lock as "assert if the lock
is dropped", so I could capture functions which decide that dropping
and reacquiring the lock is a good idea (without re-checking the
sanity of the state protected by the lock.)
Without this change, pressing ^T could result in rc.d script putting
junk strings like:
Script <filename> running
in configuration files when redirecting standard output to these files.
MFC after: 2 weeks
Vnode-backed mappings cannot be put into the kernel map, since it is a
system map.
Use exec_map for transient mappings, and remove the mappings with
kmem_free_wakeup() to notify the waiters on available map space.
Do not map the whole executable into KVA at all to copy it out into
usermode. Directly use vn_rdwr() for the case of not page aligned
binary.
There is one place left where the potentially unbounded amount of data
is mapped into exec_map, namely, in the COFF image activator
enumeration of the needed shared libraries.
Reviewed by: alc
MFC after: 2 weeks
devices that are unplugged via QEMU.
sys/dev/xen/blkback/blkback.c:
Toolstack initiated closures change the frontend's state
to Closing. The backend must change to Closing as well,
even if we can't actually close yet, in order for the
frontend to notice and start the closing process.
MFC after: 3 days
- remove the KEVENT code, which was incomplete and not compiled anyways;
- change some while() loops into for()
- adjust indentation
- remove extra whitespace
MFC after: 1 week
Advantages:
- Reduces the number of different license versions in the tree
- Eliminates a typo
- Removes some incorrect author attributions due to c/p
- Removes c/p error potential for future pmc manpages
Approved by: jkoshy, gnn, rpaulo, fabient (copyright holders)
MFC after: 1 week
initialize the cache of the system information as it was done for the
dynamic libc. This removes several sysctls from the static binary
startup.
Use the aux vector to fill the single struct dl_phdr_info describing
the static binary itself, to implement dl_iterate_phdr(3) for the
static binaries. [1]
Based on the submission by: John Marino <draco marino st> [1]
Tested by: flo (sparc64)
MFC after: 2 weeks
This allows all of the athstats statistics to work again.
Specifics:
* The previous code used chars < 0x80 as printable, and chars >= 0x80
as "statistics"
* .. which meant any statistic above 127 would wrap around to 0;
* .. so once I added the 802.11n TX/RX statistics to athstats, the tail
end of the statistics list weren't accessible.
This patch:
* adds a define which represents the magic character, rather than a hard
coded one
* the statistic in question is little endian encoded after the magic
character.
Notes:
* statfoo is useful enough to possibly warrant turning into a library API.
certain systems that take a long time to shut down, without adversely
affecting things that shut down quickly. It's also 30 seconds less than
the default hard limit of 120 seconds in kern.init_shutdown_timeout.
PR: conf/109272
Submitted by: Radim Kolar SF.NET <hsn@sendmail.cz>
struct ccb_pathinq from sys/cam/cam_ccb.h wasn't added to stable/7 at all
and didn't appear in stable/8 until svn R195534. Since __FreeBSD_version
did not get bumped until svn R195634, assume that maxio is valid at 800102
or higher.
Obtained from: Yahoo! Inc.
MFC after: 0 days
receive and forward path tagging packets with both the ifconfig fib
option or using ipfw, running ICMP6, TCP/v6 and UDP/v6 tests and
testing both setfib(2) as well as the SO_SETFIB socket option.
At 16 FIBs a total of over 64k return codes/replies/stati are checked,
sometimes multiple times (in different ways, e.g. the reflected request
as well as ipfw counter values).
The scripts need two or three machines to run and are thus not added
to the tools/regression framework but only to tools/test.
Sponsored by: Cisco Systems, Inc.
with RX/TX halting.
* Always disable/enable interrupts during a channel change, just to simply
things.
* Ensure that the ath taskqueue has completed and is paused before
continuing.
This dramatically reduces the instances of overlapping RX and reset
conditions.
PR: kern/165220
Check that the expected domain(9) families all handle the socket option
correctly and do proper bounds checks. This would catch bugs as fixed
in (r230938,)r230981.
Sponsored by: Cisco Systems, Inc.
Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
The previous code did not limit the I/O request size based on
the maximum number of segments supported by the back-end. In
current practice, since the only back-end supporting chained
requests is the FreeBSD implementation, this limit was never
exceeded.
sys/dev/xen/blkfront/block.h:
Add two macros, XBF_SEGS_TO_SIZE() and XBF_SIZE_TO_SEGS(),
to centralize the logic of reserving a segment to deal with
non-page-aligned I/Os.
sys/dev/xen/blkfront/blkfront.c:
o When negotiating transfer parameters, limit the
max_request_size we use and publish, if it is greater
than the maximum, unaligned, I/O we can support with
the number of segments advertised by the backend.
o Don't unilaterally reduce the I/O size published to
the disk layer by a single page. max_request_size
is already properly limited in the transfer parameter
negotiation code.
o Fix typos in printf strings:
"max_requests_segments" -> "max_request_segments"
"specificed" -> "specified"
MFC after: 1 day
- Make hash sizes growable, to satisfy users running large mpd
installations, having thousands of nodes.
- NG_NAMEHASH() proved to give a very bad distribution in real life
name sets, while generic hash32_str(name, HASHINIT) proved to give
an even one, so you the latter for name hash.
- Do not store unnamed nodes in slot 0 of name hash, no reason for that.
- Use the ID hash in cases when we need to run through all nodes: the
NGM_LISTNODES command and in the vnet_netgraph_uninit().
- Implement NGM_LISTNODES and NGM_LISTNAMES as separate code, the former
iterates through the ID hash, and the latter through the name hash.
- Keep count of all nodes and of named nodes, so that we don't need
to count nodes in NGM_LISTNODES and NGM_LISTNAMES. The counters are
also used to estimate whether we need to grow hashes.
- Close a race between two threads running ng_name_node() assigning same
name to different nodes.
