task structure to avoid deadlock when tearing down the VM object
during a process exit.
Found by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
it shouldn't be called.
Background:
The Linux VM open operation is called when a new VMA is
created on top of the current VMA. This is done through either mremap
flow or split_vma, usually due to mlock, madvise, munmap and so
on. This is currently not supported by the LinuxKPI.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Allow "struct linux_file" to be refcounted when its "_file" member
is NULL by using its "f_count" field. The reference counts are
transferred to the file structure when the file descriptor is
installed.
- Add missing vdrop() calls for error cases during open().
- Set the "_file" member of "struct linux_file" during open. This
allows use of refcounting through get_file() and fput() with LinuxKPI
character devices.
MFC after: 1 week
Sponsored by: Mellanox Technologies
^/head@r319125 changed the location of the backup pmbr, requiring the
output files to be regenerated, since they're binary disk dumps.
The output files were regenerated with "make rebase"--fixed in
^/head@r319294.
MFC with: r319125, r319294
PR: 219673
Sponsored by: Dell EMC Isilon
"make rebase" can be used for rebasing the output files from mkimg
after making a change to mkimg. This will come in handy soon, per
bug 219673.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
This helps ensure that the output files are regenerated if the input files
change, after the output files have been created.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
platform (returned by -m) can be different from the machine's processor
architecture (-p)
- Document that make(1) sets universal MACHINE and MACHINE_ARCH variables
based on these values
Reviewed by: imp, manpages (bjk)
Approved by: bjk, imp (implied)
Differential Revision: https://reviews.freebsd.org/D10489
FreeBSD does not guarantee kernel forward compatibility (that is,
running a newer userland on an older kernel). The documented upgrade
procedure specifies that installkernel should be performed, followed by
a reboot and then installworld. As a sanity check when installing onto
the running system (DESTDIR is / or unset), attempt to run "sh echo OK"
using rescue from the objdir. If rescue fails (e.g., because the system
has not been rebooted and the "old" kernel lacks a system call required
by the to-be-installed world), abort the installation.
This should avoid ino64 foot-shooting when the proper upgrade procedure
is not followed.
Reviewed by: allanjude, gjb, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10987
This macro allocates memory and, if malloc does not return NULL, copies
data into the new memory. However, it doesn't just check whether malloc
returns NULL. It also checks whether we called malloc with M_NOWAIT. That
is not necessary.
While it may be that malloc() will only return NULL when the M_NOWAIT flag
is set, we don't need to check for this when checking malloc's return
value. Further, in this case, the check was not completely accurate,
because it checked for flags == M_NOWAIT, rather than treating it as a bit
field and checking for (flags & M_NOWAIT).
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10942
in the icmp6_input() function.
When processing an ICMP6_ECHO_REQUEST, if IP6_EXTHDR_GET fails, it will
set nicmp6 and n to NULL. Therefore, we should condition our modification
to nicmp6 on n being not NULL.
And, when processing an ICMP6_WRUREQUEST in the (mode != FQDN) case, if
m_dup_pkthdr() fails, the code will set n to NULL. However, the very next
line dereferences n. Therefore, when m_dup_pkthdr() fails, we should
discontinue further processing and follow the same path as when m_gethdr()
fails.
Reported by: clang static analyzer
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10941
response.
Delete an unneeded rate limit for UDP under IPv6. Because ICMP6
messages have their own rate limit, it is unnecessary to apply a
second rate limit to UDP messages.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10387
There could be race condition with TX cleaning routine when cleaning mbufs,
when it was called directly from main sending thread (ena_mq_start).
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10927
Initially, stats were being updated each time OS was requesting for
the first statistic.
To read statistics from hw, condvar was used. cv_timedwait cannot be
called when unsleepable lock is held, and this happens when FreeBSD
is requesting statistic.
Seperate task is reading statistics from NIC each 1 second.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10926
Also, to simplify cleaning routine, reset task is initialized before
allocating statistics and other resources.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10925
Lock only ena_up and ena_down calls in ioctl handler, instead of whole
ioctl. Locking ioctl with sx lock that is sleepable, is not allowed in
some cases, e.g. when multicast options are being changed.
Additional locking was added in deatch function to prevent race condition
with ioctl function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10924
When mbuf chain is too long and device cannot handle that number
of segments in DMA transaction, mbuf chain will be defragmented.
Initially, driver was dropping all mbuf chains that were exceeding
supported number of segments.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10923
Both relative and absolute multitouch modes are supported.
To enable psm(4) evdev support one should:
1. Add `device evdev` and `options EVDEV_SUPPORT` to kernel config file
2. Add hw.psm.elantech_support=1 or hw.psm.synaptics_support=1 to
/boot/loader.conf for activation of absolute mode on touchpads
3. Add kern.evdev.rcpt_mask=12 to /etc/sysctl.conf to enable psm event
sourcing and disable sysmouse
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10265
Tested by: wulf, Jan Kokemueller (Lenovo devs)
the #ifdef block to only handle the rest of the logic in the loop in the
#else case.
MFC after: 3 days
Reported by: Coverity
CID: 1346844
Sponsored by: Dell EMC Isilon
Reviewed by: emaste, jonathan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10826
The following changes have been made over the last couple of months:
Features:
- With bsdgrep -r, the working directory is implied if no directory is
specified
- bsdgrep will now behave as bsdgrep -r does when it's named rgrep
- bsdgrep now understands -z/--null-data to use \0 as EOL
- GNU regex compatibility is now indicated with a "GNU compatible" in
the version string
Fixes:
- --mmap no longer hangs when coming across an EOF without an
accompanying EOL
- -o/--color matching generally improved, now produces earliest /
longest matches
- Context output now more closely aligns with GNU grep
- Zero-length matches no longer exhibit broken behavior
- Every output line now honors -b/-H/-n flags
Tests have been added for previous regressions as well as other
previously untested behaviors.
Various other fixes have been commited, and refactoring for further /
later improvements has taken place.
(The original submission changed the version string to 2.5.2, but I
decided to use 2.6.0 to reflect the addition of new features.)
Submitted by: Kyle Evans <kevans91@ksu.edu>
Differential Revision: https://reviews.freebsd.org/D10982
The PMBR last sector should be number of sector - 1 (As stated in UEFI Spec
2.6 page 118 table 17).
This fixes warning printed by linux tools like parted or fdisk.
Sponsored by: Gandi.net
is not specified.
Due to the long call chain IPsec code can produce the kernel stack
exhaustion on the i386 architecture. The debugging code usually is not
used, but it requires a lot of stack space to keep buffers for strings
formatting. This patch conditionally defines macros to disable building
of IPsec debugging code.
IPsec currently has two sysctl variables to configure debug output:
* net.key.debug variable is used to enable debug output for PF_KEY
protocol. Such debug messages are produced by KEYDBG() macro and
usually they can be interesting for developers.
* net.inet.ipsec.debug variable is used to enable debug output for
DPRINTF() macro and ipseclog() function. DPRINTF() macro usually
is used for development debugging. ipseclog() function is used for
debugging by administrator.
The patch disables KEYDBG() and DPRINTF() macros, and formatting buffers
declarations when IPSEC_DEBUG is not present in kernel config. This reduces
stack requirement for up to several hundreds of bytes.
The net.inet.ipsec.debug variable still can be used to enable ipseclog()
messages by administrator.
PR: 219476
Reported by: eugen
No objection from: #network
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10869
The Genesys chip is failing when issueing READ_CAP(16) command.
Force a quirk to disable it and use READ_CAP(10) instead.
Also, depending on used firmware, GL3224 can be recognized
either as 'storage device' or 'mass storage class' -
enable both variants in scsi_quirk_table.
Submitted by: Wojciech Macek <wma@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: mav
Differential revision: https://reviews.freebsd.org/D10902
It turned out, that some models of the Atheros PCIe
adapters (e.g. AR983x family) may fail to attach
due to insufficient timeout value.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian
Differential revision: https://reviews.freebsd.org/D10903
* add EARLY_PRINTF for debugging
* update module list to be much larger
* add random, otherwise well, stuff doesn't work.
* IPFIREWALL_DEFAULT_TO_ACCEPT
Tested:
* AP93 (AR7240 + AR9280)
TODO:
* rename to std.AR724X
* unify the built module list between all of the mips24k/mips74k atheros config files -
now that the HAL, hwpmc, USB, etc are per-chip/per-arch modules it is easy to just
compile them all and only include the ones you care about.
* Map change: create a combined kernel+rootfs image. The instructions I'll post
on the wiki (which will be for a very outdated dev board, but at least will
explain the what/why for posterity) will include how to reset the boot command.
Tested:
* AP93 dev board (AR7240 + AR9280)
When a parent directory lookup is done at the root of a snapshot mounted
under .zfs/snapshot directory, we need to look up that directory in
the parent filesystem. We achieve that by doing a VOP_LOOKUP operation
on a .zfs vnode with "snapshot" as a target name. But previously we
also passed ISDOTDOT flag to the lookup and, because of that, the lookup
actually returned the parent of the .zfs vnode, that is, a root vnode of
the parent filesystem.
Reported by: lev
Tested by: lev
MFC after: 3 days
