Commit Graph

171 Commits

Author SHA1 Message Date
Hiroki Sato
4f7bf7a846 Revert r272390.
Pointed out by:	glebius
2014-10-02 20:17:16 +00:00
Hiroki Sato
394c813d06 Add IFCAP_HWSTATS. 2014-10-02 00:19:24 +00:00
Alexander V. Chernikov
f732123e6b Add support for reading i2c SFP/SFP+ data from NIC driver and
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.

Tested on:	Cisco,Intel,Mellanox,ModuleTech,Molex transceivers
MFC after:	2 weeks
2014-08-16 19:13:52 +00:00
Glen Barber
33640c4a82 Fix a typo in a comment: s/interprete/interpret/
Submitted by:	Sam Fourman Jr.
MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2014-08-12 19:37:49 +00:00
Gleb Smirnoff
2c284d9395 Remove IPX support.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.

Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
2014-03-14 02:58:48 +00:00
Gleb Smirnoff
7df3f98623 Axe IFF_SMART.
Submitted by:	pluknet
2013-11-05 14:11:31 +00:00
Kevin Lo
a5752d55e0 Fix socket calls on error post-r243965.
Submitted by:	Garrett Cooper
2012-12-21 15:54:13 +00:00
Navdeep Parhar
09fe63205c - Updated TOE support in the kernel.
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
  These are available as t3_tom and t4_tom modules that augment cxgb(4)
  and cxgbe(4) respectively.  The cxgb/cxgbe drivers continue to work as
  usual with or without these extra features.

- iWARP driver for Terminator 3 ASIC (kernel verbs).  T4 iWARP in the
  works and will follow soon.

Build-tested with make universe.

30s overview
============
What interfaces support TCP offload?  Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE

Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe

Which connections are offloaded?  Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe

Reviewed by:	bz, gnn
Sponsored by:	Chelsio communications.
MFC after:	~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Bjoern A. Zeeb
cf7aca24f7 Removed the IFCAP_ prefix when printing the IPv6 checksum capabilities.
Submitted by:	dim
MFC after:	3 days
2012-05-28 10:45:51 +00:00
Bjoern A. Zeeb
356ab07e2d It turns out that too many drivers are not only parsing the L2/3/4
headers for TSO but also for generic checksum offloading.  Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.

To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.

Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible).  Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation.  Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.

This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.

Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.

Individual driver updates will have to follow, as will SCTP.

Reported by:	gallatin, dim, ..
Reviewed by:	gallatin (glanced at?)
MFC after:	3 days
X-MFC with:	r235961,235959,235958
2012-05-28 09:30:13 +00:00
Bjoern A. Zeeb
1623284fab MFp4 bz_ipv6_fast:
Allow tso4 and tso6 be set individually given we have the bits.
  This will help with drivers not working as expected during the
  transition time and later.

  Sponsored by:	The FreeBSD Foundation
  Sponsored by:	iXsystems

Reviewed by:	gnn
MFC After:	1 week
2012-05-19 23:25:57 +00:00
Robert Millan
9697f9f801 Disable jail support in ifconfig when either building a rescue
image or MK_JAIL knob has been set to "no".

Reviewed by:	bz
Approved by:	adrian (mentor)
2012-02-14 07:14:42 +00:00
Gleb Smirnoff
08b68b0e4c A major overhaul of the CARP implementation. The ip_carp.c was started
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.

The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.

ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.

To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]

The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.

Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!

PR:		kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by:	bz
Submitted by:	bz [1]
2011-12-16 12:16:56 +00:00
Bjoern A. Zeeb
ad2571a225 If compiling RESCUE always ignore feature_present(3) calls so that
a /rescue/ifconfig more modern than the kernel could still configure
IPv4 or IPv6 addresses.

Reported by:	Andrzej Tobola (ato iem.pw.edu.pl)
Reported by:	gcooper
MFC after:	1 day
X-MFC:		will not MFC any time soon, just reminder for r222527
2011-07-18 10:29:16 +00:00
Luigi Rizzo
c9d658e9f7 Grab one of the ifcap bits for netmap, and enable printing in ifconfig.
Document the fact that we might want an IFCAP_CANTCHANGE mask,
even though the value is not yet used in sys/net/if.c

(asked on -current a week ago, no feedback so i assume no objection).
2011-06-14 12:40:55 +00:00
Bjoern A. Zeeb
5af3fa9a5f Conditionally compile in the af_inet and af_inet6, af_nd6 modules.
If compiled in for dual-stack use, test with feature_present(3)
to see if we should register the IPv4/IPv6 address family related
options.

In case there is no "inet" support we would love to go with the
usage() and make the address family mandatory (as it is for anything
but inet in theory).  Unfortunately people are used to
  ifconfig IF up/down
etc. as well, so use a fallback of "link".  Adjust the man page
to reflect these minor details.

Improve error handling printing a warning in addition to the usage
telling that we do not know the given address family in two places.

Reviewed by:	hrs, rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	2 weeks
2011-05-31 14:40:21 +00:00
Weongyo Jeong
6e3cb00068 Introduces IFF_CANTCONFIG interface flag to point that the interface
isn't configurable in a meaningful way.  This is for ifconfig(8) or
other tools not to change code whenever IFT_USB-like interfaces are
registered at the interface list.

Reviewed by:	brooks
No objections:	gavin, jkim
2010-12-07 20:23:47 +00:00
Weongyo Jeong
6d2f981e9b Don't print usbus[0-9] interfaces that it's not the interesting
interface type for ifconfig(8).
2010-12-01 03:24:38 +00:00
John Baldwin
d99d8e2e38 Ethernet vlan(4) interfaces have valid Ethernet link layer addresses but
use a different interface type (IFT_L2VLAN vs IFT_ETHER).  Treat IFT_L2VLAN
interfaces like IFT_ETHER interfaces when handling link layer addresses.

Reviewed by:	syrinx (bsnmpd)
MFC after:	1 week
2010-08-06 15:09:21 +00:00
Xin LI
57d848483e When an underlying ioctl(2) handler returns an error, our ioctl(2)
interface considers that it hits a fatal error, and will not copyout
the request structure back for _IOW and _IOWR ioctls, keeping them
untouched.

The previous implementation of the SIOCGIFDESCR ioctl intends to
feed the buffer length back to userland.  However, if we return
an error, the feedback would be defeated and ifconfig(8) would
trap into an infinite loop.

This commit changes SIOCGIFDESCR to set buffer field to NULL to
indicate the previous ENAMETOOLONG case.

Reported by:	bschmidt
MFC after:	2 weeks
2010-04-14 22:02:19 +00:00
Qing Li
6b533b5ddb Verify interface up status using its link state only
if the interface has such capability. The interface
capability flag indicates whether such capability
exists. This approach is much more backward compatible.
Physical device driver changes will be part of another
commit.

Also updated the ifconfig utility to show the LINKSTATE
capability if present.

Reviewed by:	rwatson, imp, juli
MFC after:	3 days
2010-03-16 17:59:12 +00:00
Pyun YongHyeon
0f686c0fc9 Add TSO support on VLAN in fconfig(8).
Reviewed by:	thompsa
2010-02-20 23:01:09 +00:00
Xin LI
215940b3fa Revised revision 199201 (add interface description capability as inspired
by OpenBSD), based on comments from many, including rwatson, jhb, brooks
and others.

Sponsored by:	iXsystems, Inc.
MFC after:	1 month
2010-01-27 00:30:07 +00:00
Will Andrews
c3582a1967 Make ``ifconfig -l ether'' only list interfaces that speak Ethernet.
PR:		118987
Approved by:	ken (mentor)
2009-11-25 00:00:57 +00:00
Xin LI
1a9d4dda9b Revert revision 199201 for now as it has introduced a kernel vulnerability
and requires more polishing.
2009-11-12 19:02:10 +00:00
Xin LI
41c8c6e876 Add interface description capability as inspired by OpenBSD.
MFC after:	3 months
2009-11-11 21:30:58 +00:00
Bjoern A. Zeeb
00dc5f8e66 Make ifconfig ifN -vnet <jname|jid> actually work:
- fix ifconfig to ignore the non-existent interface in the current
  network stack in case of '-vnet'.
- in ifconfig: actually use the local variables defined for the
  vnet functions rather than modifying the global.

Reviewed by:	rwatson
Approved by:	re (kib)
2009-07-26 11:25:57 +00:00
Jamie Gritton
5061de23fa Add the "vnet" and "-vnet" options, to allow moving interfaces between
jails with VIMAGE.

Approved by:	bz (mentor)
2009-06-24 18:21:37 +00:00
Xin LI
b59dcaeeb3 - Use size_t instead of int when appropriate;
- Use C99 sparse initialization.

With these changes ifconfig(8) is WARNS=2 clean.
2009-06-23 23:49:52 +00:00
Robert Watson
31b2ac28c9 ifconfig(8) no longer needs to know how to print the IFF_NEEDSGIANT flag,
since it shortly won't be defined at all.
2009-04-18 20:10:39 +00:00
Jamie Gritton
a9948a71cf Default to AF_LOCAL instead of AF_INET sockets for non-family-specific
operations.  This allows the query operations to work in non-IPv4 jails,
and will be necessary in a future of possible non-INET networking.

Approved by:	bz (mentor)
2009-03-15 22:33:18 +00:00
Sam Leffler
fab0828067 use correct interface name when setting flags; fixes ifconfig ... create ... up
Noticed by:	Chris Anderson
2009-01-14 22:55:49 +00:00
Sam Leffler
39669258d7 Distinguish between cmd/parameters used for clone operations and
all others.  Use this to disambiguate cmd line arguments that can
be either clone params or regular parameters so, in particular,
"bssid" again works as a regular parameter.

While here leverage the above to improve the logic for flushing
clone operations on the first !clone cmd line parameter.

Reviewed by:	jhay
2008-09-29 16:27:32 +00:00
Jack F Vogel
eafbb00d24 Add support in ifconfig to control the vlan hardware filter feature.
Reviewed by: EvilSam and moi
MFC after:1 week
2008-08-28 22:13:44 +00:00
Andrew Thompson
3b0edf7dd0 Move the grekey to its own file, ifconfig.c does not have interface specific
code.

Submitted by:	sam
2008-08-03 03:36:12 +00:00
Andrew Thompson
131c55bc5b Add support for the optional key in the GRE header.
PR:		kern/114714
Submitted by:	Cristian KLEIN
2008-06-20 17:26:34 +00:00
Sam Leffler
2fa02c5fb7 Fix handling of create operation together with setting other parameters:
o mark cmds/parameters to indicate they are potential arguments to a clone
  operation (e.g. vlantag)
o when handling a create/clone operation do the callback on seeing the first
  non-clone cmd line argument so the new device is created and can be used;
  and re-setup operating state to reflect the newly created device

Reviewed by:	Eugene Grosbein
MFC after:	2 weeks
2008-03-31 15:38:07 +00:00
Sam Leffler
de0abf19ba Wake On Lan (WOL) infrastructure
Submitted by:	Stefan Sperling <stsp@stsp.name>
Reviewed by:	brooks
2007-12-10 02:31:00 +00:00
Andrew Thompson
265e8a9acc Fix the module name matching to the drivers present in the kernel. Previously
it would return true on a partial match where it would think the edsc module
was already present by having a positive match on 'ed'.  This changes it so
that it compares the full string including the nul terminators.

This also fixes a buffer overflow in the ifkind variable where the length of
the interface name in *argv wasnt checked for size.

Reviewed by:	brooks
Approved by:	re (gnn)
2007-10-04 09:45:41 +00:00
Robert Watson
0cae11b9cc Remove IPX over IP tunneling pieces from ifconfig(8), omitted portion of
previous commit:

  Remove IPX over IP tunneling support, which allows IPX routing over IP
  tunnels, and was not MPSAFE.  The code can be easily restored in the
  event that someone with an IPX over IP tunnel configuration can work
  with me to test patches.

  This removes one of five remaining consumers of NET_NEEDS_GIANT.

  Approved by:    re (kensmith)

Spotted by:	Artem Naluzhny <tutat nhamon dot com dot ua>
2007-06-13 18:07:59 +00:00
Andre Oppermann
a6575bfc2d Add reporting and toggling of TCP LRO (large receive offload) support to
ifconfig(8).
2007-06-11 20:15:20 +00:00
Andrew Thompson
a389ab003f Add the -n flag for disabling automatic module loading, this will be used by
rc.d to stop it reloading the network module on unload.
2007-05-22 17:41:09 +00:00
Yaroslav Tykhiy
f013cfc544 Back out rev. 1.129 because it breaks the practice of auto-loading
hardware drivers.  Unlike pseudo-device drivers, which just attach
to the cloning framework and wait for "ifconfig create", h/w drivers
create interfaces for installed cards as soon as loaded.  The issue
of devd(8) involuntarily reloading modules should be dealt with in a
different way.
2007-03-24 20:26:54 +00:00
Yaroslav Tykhiy
a40fb996ae Attempt to load the kernel module only if we are going to create a
new interface.  In other cases loading the module is unwanted and
can lead to ill side effects.  One such effect found is as follows:
"kldunload if_foo" tells the module to kill all its interfaces,
which results in messages sent to devd; the module unloads.  Then
devd starts processing the messages, which ends up in a etc script
running ifconfig fooX, which reloads the module.
2007-03-12 13:08:56 +00:00
Sam Leffler
e5f015499d o consistently check strlcpy result
o warn when we skip an interface because it's name is too long
2007-02-27 17:11:18 +00:00
Sam Leffler
0b28f08125 correct type to silence const complaint 2007-02-27 17:03:22 +00:00
Sam Leffler
30705853b0 unbreak create operation, must copy argument to global name
Spotted by:	des
2007-02-27 17:00:59 +00:00
Sam Leffler
cb8c905ae9 use getifaddrs from libc instead of private code
Reviewed by:	bms
MFC after:	1 month
2007-02-24 23:55:46 +00:00
Bjoern A. Zeeb
3ca72aeb09 Fix an off-by-one which could mean writing beyond the end of the array
when copying the interface name.
This code part should probably be rewritten.
2006-12-29 18:44:04 +00:00
Andre Oppermann
6b92a00668 In setifcap() only set/unset those capabilities the interface actually
supports.
2006-09-20 15:38:37 +00:00