Commit Graph

125801 Commits

Author SHA1 Message Date
John Baldwin
8b6d68671b Some cosmetic tweaks:
- Right justify 'pid' label.
- Move the uid column to the right 2 columns so that the 3 process id
  columns (pid, ppid, pgrp) are grouped together.
- Expand the uid column to 5 chars.
- Don't indent the tid for multithreaded processes.

Requested by:	bde (1, 2, 4)
2006-08-01 15:29:46 +00:00
Maxim Konovalov
cf26b291fe o Reserve space for 3.x releases similar to 2.1.
o 3.0.1 is a security/critical release.

Submitted by:	rpaulo@netbsd
2006-08-01 15:26:09 +00:00
Andrew Gallatin
091feecd12 - add read only sysctl to indicate if write-combining was enabled
- enable mxge_dummy_rdma() right after reset, and make sure to disable
  when detaching the driver.
2006-08-01 14:02:54 +00:00
Robert Watson
eaa6dfbcc2 Reimplement socket buffer tear-down in sofree(): as the socket is no
longer referenced by other threads (hence our freeing it), we don't need
to set the can't send and can't receive flags, wake up the consumers,
perform two levels of locking, etc.  Implement a fast-path teardown,
sbdestroy(), which flushes and releases each socket buffer.  A manual
dom_dispose of the receive buffer is still required explicitly to GC
any in-flight file descriptors, etc, before flushing the buffer.

This results in a 9% UP performance improvement and 16% SMP performance
improvement on a tight loop of socket();close(); in micro-benchmarking,
but will likely also affect CPU-bound macro-benchmark performance.
2006-08-01 10:30:26 +00:00
Tim Kientzle
225ade520e If skip_file_dev and skip_file_ino haven't been set (are still == 0),
then don't use them for testing for a recursive add.

Thanks to: Spencer Minear
MFC after: 7 days
2006-08-01 05:31:29 +00:00
David E. O'Brien
a4755e0e13 Correct spelling of 3DNow!. 2006-08-01 01:23:39 +00:00
Robert Watson
b5ff091431 Close a race that occurs when using sendto() to connect and send on a
UNIX domain socket at the same time as the remote host is closing the
new connections as quickly as they open.  Since the connect() and
send() paths are non-atomic with respect to another, it is possible
for the second thread's close() call to disconnect the two sockets
as connect() returns, leading to the consumer (which plans to send())
with a NULL kernel pointer to its proposed peer.  As a result, after
acquiring the UNIX domain socket subsystem lock, we need to revalidate
the connection pointers even though connect() has technically succeed,
and reurn an error to say that there's no connection on which to
perform the send.

We might want to rethink the specific errno number, perhaps ECONNRESET
would be better.

PR:		100940
Reported by:	Young Hyun <youngh at caida dot org>
MFC after:	2 weeks
MFC note:	Some adaptation will be required
2006-07-31 23:00:05 +00:00
Andrew Thompson
51383c37cd Add some statistics that are needed to support RFC4188 as part of the SoC2006
work on a bridge monitoring module for BSNMP.

Submitted by:	shteryana (SoC 2006)
2006-07-31 20:24:46 +00:00
Yaroslav Tykhiy
af73d4e69e inetd and telnetd are not included in the standard release
crunched floppies, but they can be included as options in
src/release/picobsd (omitted by default though.)  Therefore
preserve the RELEASE_CRUNCH knob in their Makefiles, but
tell its real purpose in a comment.
2006-07-31 19:15:10 +00:00
Christian Brueffer
ee1458e75c Note hardware supported by powerpc, based on GENERIC. 2006-07-31 17:04:28 +00:00
Christian Brueffer
a688fd8409 Mark two more items as merged. 2006-07-31 16:49:25 +00:00
David E. O'Brien
80cd95f9cc Rather than print out a nice error message giving details sufficent to fix
a 'ufs_dirbad' and then panicing (making it very hard to see the details),
put them in the panic message itself.
2006-07-31 15:44:13 +00:00
John Baldwin
53c9158f24 Trim an obsolete comment. ktrgenio() stopped doing crazy gymnastics when
ktrace was redone to be mostly synchronous again.
2006-07-31 15:31:43 +00:00
Joseph Koshy
1ae9926515 In 'od -c' mode, deal with printable but zero-width combining
characters correctly.  These characters are displayed "combined"
with a space character.

PR:		misc/100215
Submitted by:	"J.R. Oldroyd" <<fbsd AT opal.com>>
Reviewed by:	"J.R. Oldroyd" <<fbsd AT opal.com>> (revised patch)
MFC after:	3 days
2006-07-31 14:17:04 +00:00
Yaroslav Tykhiy
b7141b2e2a Regen. 2006-07-31 14:13:25 +00:00
Yaroslav Tykhiy
ed4ab6bbe9 Tell the bitter truth that WITHOUT_GNU and WITHOUT_PAM
don't have any effect now.
2006-07-31 13:53:27 +00:00
Yaroslav Tykhiy
594a130b8a Stop enforcing dependencies between MK_* options at Makefile level.
All the dependencies are satisfied now in <bsd.own.mk>.
2006-07-31 13:29:36 +00:00
Yaroslav Tykhiy
33f0bffeb7 telnetd(8) doesn't really go to the crunched floppies,
so its Makefile needn't test for RELEASE_CRUNCH.

Suggested by:	ru
2006-07-31 13:20:44 +00:00
Yaroslav Tykhiy
16f2e711b8 Regen from src/tools/build/options. 2006-07-31 13:15:04 +00:00
Yaroslav Tykhiy
f7ee05c00b Document some more src.conf(5) options:
WITHOUT_GNU, WITHOUT_NS_CACHING, WITHOUT_PAM.

Noticed by:	src/tools/build/options/makeman
2006-07-31 13:08:47 +00:00
Yaroslav Tykhiy
c3b08cc667 Actually skip over undocumented options with "continue"
to avoid artifacts in the manpage generated.  Previously
an orphaned paragraph on dependencies of such an option
would appear.
2006-07-31 12:41:13 +00:00
Yaroslav Tykhiy
62f9f95382 Do not forget to increment the input line counter
when reading a word spanning multiple lines.

PR:		bin/101094
MFC after:	5 days
2006-07-31 11:32:12 +00:00
Yaroslav Tykhiy
6a215886c0 Granting the amount of misunderstanding the last change received,
extend it with an example to clarify the point.
2006-07-31 09:25:20 +00:00
Tim Kientzle
fc1e63e49b Remove two unused variables.
Thanks to: Stefan Farfeleder
2006-07-31 04:57:46 +00:00
Marcel Moolenaar
1f2814b5c3 Add the bones for PowerPC release documentation. This has been
derived from ia64.
2006-07-31 01:32:30 +00:00
Marcel Moolenaar
1a14712afd Add proc-ia64.sgml to SRCS (uncomment). 2006-07-31 01:27:16 +00:00
Bill Paul
498bd0d326 Fix the following bugs in re(4)
- Correct the PCI ID for the 8169SC/8110SC in the device list (I added
  the macro for it to if_rlreg.h before, but forgot to use it.)

- Remove the extra interrupt spinlock I added previously. After giving it
  some more thought, it's not really needed.

- Work around a hardware bug in some versions of the 8169. When sending
  very small IP datagrams with checksum offload enabled, a conflict can
  occur between the TX autopadding feature and the hardware checksumming
  that can corrupt the outbound packet. This is the reason that checksum
  offload sometimes breaks NFS: if you're using NFS over UDP, and you're
  very unlucky, you might find yourself doing a fragmented NFS write where
  the last fragment is smaller than the minimum ethernet frame size (60
  bytes). (It's rare, but if you keep NFS running long enough it'll
  happen.) If checksum offload is enabled, the chip will have to both
  autopad the fragment and calculate its checksum header. This confuses
  some revs of the 8169, causing the packet that appears on the wire
  to be corrupted. (The IP addresses and the checksum field are mangled.)
  This will cause the NFS write to fail. Unfortunately, when NFS retries,
  it sends the same write request over and over again, and it keeps
  failing, so NFS stays wedged.

  (A simple way to provoke the failure is to connect the failing system
  to a network with a known good machine and do "ping -s 1473 <badhost>"
  from the good system. The ping will fail.)

  Someone had previously worked around this using the heavy-handed
  approahch of just disabling checksum offload. The correct fix is to
  manually pad short frames where the TCP/IP stack has requested
  checksum offloading. This allows us to have checksum offload turned
  on by default but still let NFS work right.

- Not a bug, but change the ID strings for devices with hardware rev
  0x30000000 and 0x38000000 to both be 8168B/8111B. According to RealTek,
  they're both the same device, but 0x30000000 is an earlier silicon spin.
2006-07-30 23:25:21 +00:00
Marcel Moolenaar
acdb66fce6 Use NO_SHARED=YES to force a static link.
Pointed out by: ru@
2006-07-30 20:51:41 +00:00
Simon L. B. Nielsen
78078a569f Pass BN_CTX to internal functions instead of allocating it internally.
This allows msqrt() to only call BN_CTX_new() once intead of many times.

Suggested and reviewed by:	stefanf
2006-07-30 19:29:26 +00:00
Tim Kientzle
902ce6f035 Conditionally include sys/mkdev.h on platforms (such as Solaris) that need it.
While I'm here, correctly alphabetize 't' after 's'.

Thanks to: VMiklos
2006-07-30 18:34:40 +00:00
Tim Kientzle
4dabd2811a Conditionally include sys/mkdev.h on platforms (such as Solaris) that need it.
Thanks to: VMiklos
2006-07-30 18:33:20 +00:00
Simon L. B. Nielsen
2ab7aa997e Resolve conflicts after import of OpenSSL 0.9.8b.
This was missed the first time around since eng_padlock.c was not part
of OpenSSL 0.9.7e and therefor did not have the v0_9_7e CVS tag used
during original resolve of conflicts.

Noticed by:	Antoine Brodin <antoine.brodin@laposte.net>
2006-07-30 14:17:54 +00:00
Stephen McKay
55fd436b5f This script should probably have an enabling variable since it can produce
surprising results.  For now, at least make it safe to boot the default
kernel when /boot/kernel is already a symlink.
2006-07-30 12:54:37 +00:00
Maxim Konovalov
1b405ff747 o Kill unneeded assignment.
Obtained from:	OpenBSD
2006-07-30 07:41:28 +00:00
Tim Kientzle
693285bc87 Use 'skip' when ignoring data in tar archives. This dramatically
increases performance when extracting a single entry from a large
uncompressed archive, especially on slow devices such as USB hard
drives.

Requires a number of changes:
   * New archive_read_open2() supports a 'skip' client function
   * Old archive_read_open() is implemented as a wrapper now, to
     continue supporting the old API/ABI.
   * _read_open_fd and _read_open_file sprout new 'skip' functions.
   * compression layer gets a new 'skip' operation.
   * compression_none passes skip requests through to client.
   * compression_{gzip,bzip2,compress} simply ignore skip requests.

Thanks to: Benjamin Lutz, who designed and implemented the whole thing.
   I'm just committing it.  ;-)

TODO: Need to update the documentation a little bit.
2006-07-30 00:29:01 +00:00
Tim Kientzle
85af60729f Don't mention 'pax' in the context of POSIX-1988, since
pax wasn't introduced until the 1993 (?) revision.

(I need to double-check when pax was introduced and
clarify some of the history here.  In particular,
I should explain that the 'pax' standard now owns the
'ustar' format spec.)
2006-07-29 23:51:10 +00:00
Tim Kientzle
aa12ea14a8 Remove mention of 'tp' format, since that support has been
removed.  (It was introduced experimentally and I have simply
never had time to finish it.)
2006-07-29 23:49:25 +00:00
Simon L. B. Nielsen
35fc1829d8 Sync FREEBSD-Xlist with what was actually excluded from OpenSSL 0.9.8b
import.
2006-07-29 22:40:45 +00:00
Simon L. B. Nielsen
f6ec947c28 Add some rough notes on how to import a new OpenSSL version into the
FreeBSD base system.  Parts are inspired by the OpenSSH upgrade notes.
2006-07-29 22:01:26 +00:00
Nate Lawson
93870c0550 Document many of the sysctls in acpi. Bump the date on acpi_thermal.4
because I forgot to on the last change.

MFC after:	1 day
2006-07-29 21:47:24 +00:00
Nate Lawson
d1b16e1864 Add a new sysctl, hw.acpi.handle_reboot. If set, acpi will attempt to
perform the reboot action via the reset register instead of our legacy
method.  Default is 0 (use legacy).  This is needed because some systems
hang on reboot even though they claim to support the reset register.

MFC after:	2 days
2006-07-29 21:46:16 +00:00
Simon L. B. Nielsen
31c9ecbf46 Add /usr/lib/engines for OpenSSL engines. 2006-07-29 19:47:09 +00:00
Simon L. B. Nielsen
f57d6668ad Bump __FreeBSD_version for OpenSSL 0.9.8b import. 2006-07-29 19:44:07 +00:00
Marcel Moolenaar
259d74ed53 Link kldxref(8) static on PowerPC to work around a SIGSEGV that
cannot easily be analyzed due to there being no debugger yet.
The SIGSEGV only happens when kldxref is linked shared.
Since kldxref(8) is needed for a release build, having it not
dump core is important.
2006-07-29 19:43:26 +00:00
Simon L. B. Nielsen
e7926dc0a5 Upgrade to OpenSSL 0.9.8b. 2006-07-29 19:41:41 +00:00
Marcel Moolenaar
9ceddbd532 Change maketempfile() to return a FILE* so as to eliminate the fopen()
that immediately follows the only call to it. maketempfile() uses
mkstemp(), so the temporary file has already been opened and using
fopen() again just opens the file twice. This also fixes the invalid
mode used on the fopen().
While here, assign NULL to fxref after fclose() because we test for
fxref being !NULL to determine if we have the (temporary) hints file
open.
2006-07-29 19:39:03 +00:00
Simon L. B. Nielsen
09bf29a41f Resolve conflicts after import of OpenSSL 0.9.8b. 2006-07-29 19:14:51 +00:00
Simon L. B. Nielsen
f6ab039488 This commit was generated by cvs2svn to compensate for changes in r160814,
which included commits to RCS files with non-trunk default branches.
2006-07-29 19:10:21 +00:00
Simon L. B. Nielsen
3b4e3dcb9f Vendor import of OpenSSL 0.9.8b 2006-07-29 19:10:21 +00:00
Marcel Moolenaar
302981e72a Remove sio(4) and related options from MI files to amd64, i386
and pc98 MD files. Remove nodevice and nooption lines specific
to sio(4) from ia64, powerpc and sparc64 NOTES. There were no
such lines for arm yet.
sio(4) is usable on less than half the platforms, not counting
a future mips platform. Its presence in MI files is therefore
increasingly becoming a burden.
2006-07-29 18:38:54 +00:00