the separate ath0 TX taskq.
Whilst here, make sure that the TX software scheduler is also
running out of the TX task, rather than the ath0 taskqueue.
Make sure that the tx taskqueue is blocked/unblocked as necessary.
This allows for a little more parallelism on multi-core machines,
as well as (eventually) supporting a higher task priority for TX
tasks, allowing said TX task to preempt an already running RX or
TX completion task.
Tested:
* AR5416, AR9280 hostap and STA modes
- Make bge_lookup_{rev,vendor}() static.
- Factor out chip identification rather than duplicating the code.
- Sanitize bge_probe() a bit (don't hardcode buffer sizes, allow
bge_lookup_vendor() to return NULL so the excessive panic() three
can be removed there, etc.) and return BUS_PROBE_DEFAULT rather than
hardcoding 0.
- According to the Linux tg3 driver, BCM57791 and BCM57795 aren't
capable of Gigabit Ethernet.
- Check the return value of taskqueue_start_threads().
lle_event replaced arp_update_event after the ARP rewrite and ended up
in if_ether.h simply because arp_update_event used to be there too.
IPv6 neighbor discovery is going to grow lle_event support and this is a
good time to move it to if_llatbl.h.
The two in-tree consumers of this event - OFED and toecore - are not
affected.
Reviewed by: bz@
- At least the Saturn chips of 501-6738 cards need a delay after freezing
the external GMII pins before the internal PHY is accessible again. So
wait a bit after (un)freezing these. Also don't touch the other bits of
that configuration register. [1]
- Take advantage of nitems().
Reported and tested by: Paul Keusemann [1]
MFC after: 3 days
- Use NFSD_MONOSEC (which maps to time_uptime) instead of the seconds
portion of wall-time stamps to manage timeouts on events.
- Remove unused nd_starttime from the per-request structure in the new
NFS server.
- Use nanotime() for the modification time on a delegation to get as
precise a time as possible.
- Use time_second instead of extracting the second from a call to
getmicrotime().
Submitted by: bde (3)
Reviewed by: bde, rmacklem
MFC after: 2 weeks
in the man page and its header counterpart.
Submitted by: Christoph Mallon <christoph.mallon@gmx.de> (initial version)
Reviewed and further improved by: bde (previous version)
All bugs are: mine
The changes are:
- the microcore code loaded into the NAE has to be byteswapped
in LE
- the descriptors in memory for a P2P NAE descriptor has to be
byteswapped in LE
- the m_data pointer is already cacheline aligned, so the
unnecessary m_adj to cacheline size can be removed
- fix mask used to obtain physical address from the Tx freeback
descriptor
- fix a compile error in code under #ifdef
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
The CMS output queue credit configuration register is 64 bit, so use
a 64 bit variable while updating it.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Update MDIO reset code to support Broadcom XLP B1 revisions.
Update nlm_xlpge_ioctl, nlm_xlpge_port_enable need not be
called after nlm_xlpge_init.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Support few more versions of board firmware. In case the security
block is disabled, enable it at boot. Also increase the excluded
memory region to cover the area used by the firmware to initialize
devices.
Update the function xlp_pcib_hardware_swap_enable() to do nothing
when BYTE_ORDER is not BIG_ENDIAN. PCIe hardware swap is not requred
in little-endian mode as the endianness matches that of CPU.
reading registers from other CPUs. As it turns out, the hardware doesn't
really like concurrent IPI'ing causing adverse effects. Also the thought
deadlock when using this spin lock here and the targeted CPU(s) are also
holding or in case of nested locks can't actually happen. This is due to
the fact that on sparc64, spinlock_enter() only raises the PIL but doesn't
disable interrupts completely. Thus direct cross calls as used for the
register reading (and all other MD IPI needs) still will be executed by
the targeted CPU(s) in that case.
MFC after: 3 days
FreeBSD TCP-level socket options (only the first two are). Instead,
using a mapping function and fail unsupported options as we do for other
socket option levels.
MFC after: 2 weeks
comconsole setup. Previously the hint would be set when if you set a
custom port, but it would not be updated if you later set a custom speed.
Also, leave the hw.uart.console hint mutable so it can be overridden or
unset by the user if needed.
Reviewed by: kib (earlier version)
MFC after: 1 week
The previous change accidentally left the substraction we
were trying to avoid in case that i_blocks could become
negative.
Reported by: bde
MFC after: 4 days
By setting dev.netmap.fwd=1 (or enabling the feature with a per-ring flag),
packets are forwarded between the NIC and the host stack unless the
netmap client clears the NS_FORWARD flag on the individual descriptors.
This feature greatly simplifies applications where some traffic
(think of ARP, control traffic, ssh sessions...) must be processed
by the host stack, whereas the bulk is handled by the netmap process
which simply (un)marks packets that should not be forwarded.
The default is chosen so that now a netmap receiver operates
in a mode very similar to bpf.
Of course there is no free lunch: traffic to/from the host stack
still operates at OS speed (or less, as there is one extra copy in
one direction).
HOWEVER, since traffic goes to the user process before being
reinjected, and reinjection occurs in a user context, you get some
form of livelock protection for free.
Ext2fs uses unsigned fields in its dinode struct.
FreeBSD can have negative values in some of those
fields and the inode is meant to interact with the
system so we have never respected the unsigned
nature of most of those fields.
Block numbers and the NFS generation number do
not need to be signed so redefine them as
unsigned to better match the on-disk information.
MFC after: 1 week
Add a missing 0 to the mask for byte0 of C_SIZE.
The previous mask (0xc) worked except that the last 0-1536K of the disk
could not be accessed since we were shifting the (wrong) bits we did
mask off the right edge.
Testing with fsx has revealed problems and in order to
hunt the bugs properly we need reduce the complexity.
This seems to help but is not a complete solution.
MFC after: 3 days
logic (refer to [1] for associated discussion). snd_cwnd and snd_wnd are
unsigned long and on 64 bit hosts, min() will truncate them to 32 bits and could
therefore potentially corrupt the result (although under normal operation,
neither variable should legitmately exceed 32 bits).
[1] http://lists.freebsd.org/pipermail/freebsd-net/2013-January/034297.html
Submitted by: jhb
MFC after: 1 week
generating binary diffs.
- Constify a few strings used in the driver.
- Style changes to make the driver compile with default clang settings.
Approved by: HighPoint Technologies
MFC after: 3 days
gcc handles -symbolic by passing -Bsymbolic through to ld. clang ignores
-symbolic and thus invokes ld without -Bsymbolic which leads to some symbols
not being properly linked in loader.efi. Fix this by using -Wl,-Bsymbolic which
passes -Bsymbolic to ld in both the gcc and clang cases.
Approved by: rpaulo
This is easily possible now that the TX is protected by a single
lock, rather than a per-TXQ (and thus per-TID) lock.
Only set CLRDMASK if none of the destinations are filtered.
This likely will need some tuning when it comes time to do UASPD/PS-POLL
TX, however at that point it should be manually set anyway.
Tested:
* AR9280, STA mode
TODO:
* More thorough testing in AP mode
* test other chipsets, just to be safe/sure.
that 'smp_started != 0'.
This is required because the VT-x initialization calls smp_rendezvous()
to set the CR4_VMXE bit on all the cpus.
With this change we can preload vmm.ko from the loader.
Reported by: alfred@, sbruno@
Obtained from: NetApp
arch_zfs_probe method is supposed to only probe for ZFS vdevs, but it can
not expect that ZFS data is in a ready state yet.
So, move some code from sparc64_zfs_probe to main to meet the constraints.
Reported by: Chris Ross <cross+freebsd@distal.com>
Tested by: Chris Ross <cross+freebsd@distal.com>
MFC after: 4 days
'bhyve' was developed by grehan@ and myself at NetApp (thanks!).
Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.
Obtained from: NetApp
Make umass return an error code if SCSI sense retrieval request
has failed. Make sure scsi_error_action honors SF_NO_RETRY and
SF_NO_RECOVERY in all cases, even if it cannot parse sense bytes.
Reviewed by: hselasky (umass), scottl (cam)
interrupt counts and names, by making the names into an array of fixed-length
strings that can be directly indexed. This eliminates extra memory accesses
on every interrupt to increment the counts.
As a side effect, it also fixes a bug that would corrupt the names data
if a name was longer than MAXCOMLEN, which led to incorrect vmstat -i output.
Approved by: cognet (mentor)
to the old one's nfs.nfsrv.async.
Please note that by enabling this option (default is disabled), the system
could potentionally have silent data corruption if the server crashes
before write is committed to non-volatile storage, as the client side have
no way to tell if the data is already written.
Submitted by: rmacklem
MFC after: 2 weeks
two upcoming features:
semi-transparent mode:
when a device is opened in this mode, the
user program will be able to mark slots that must be forwarded
to the "other" side (i.e. from NIC to host stack, or viceversa),
and the forwarding will occur automatically at the next netmap syscall.
This saves the need to open another file descriptor and do
the forwarding manually.
direct-forwarding mode:
when operating with a VALE port, the user can specify in the slot
the actual destination port, overriding the forwarding decision
made by a lookup of the destination MAC. This can be useful to
implement packet dispatchers.
No API changes will be introduced.
No new functionality in this patch yet.
CPUs exhibit bad behavior if this is done (Intel Errata AAJ3, hangs on
Pentium-M, and trashing of the local APIC registers on a VIA C7). The
local APIC is implicitly mapped UC already via MTRRs, so the clflush isn't
necessary anyway.
MFC after: 2 weeks
tunable_mbinit() where it is next to where it is used later.
Change the sysinit level of tunable_mbinit() from SI_SUB_TUNABLES
to SI_SUB_KMEM after the VM is running. This allows to use better
methods to determine the effectively available physical and virtual
memory available to the kernel.
Update comments.
In a second step it can be merged into mbuf_init().
a process has an auditid/preselection masks specified, and
is jailed, include the zonename (jailname) token as a
part of the audit record.
Reviewed by: pjd
MFC after: 2 weeks
chip hangs.
* Always do a reset in ath_bmiss_proc(), regardless of whether the
hardware is "hung" or not. Specifically, for spectral scan, there's
likely a whole bunch of potential hangs that we don't (yet) recognise
in the HAL. So to avoid staying RX deaf persisting until the station
disassociates, just do a no-loss reset.
* Set sc_beacons=1 in STA mode. During a reset, the beacon programming
isn't done. (It's likely I need to set sc_syncbeacons during a hang
reset, but I digress.) Thus after a reset, there's no beacon timer
programming to send a BMISS interrupt if beacons aren't heard ..
thus if the AP disappears, you won't get notified and you'll have to
reset your interface.
This hasn't yet fixed all of the hangs that I've seen when debugging
spectral scan, but it's certainly reduced the hang frequency and it
should improve general STA stability in very noisy environments.
Tested:
* AR9280, STA mode, spectral scan off/on
PR: kern/175227
when an interface is going down.
Right now it's quite possible (but very unlikely!) that ath_reset()
or similar is called, leading to a beacon config call, in parallel with
the last VAP being destroyed.
This likely should be fixed by making sure the bmiss/bstuck/watchdog
taskqueues are canceled whenever the last VAP is destroyed.
in r245004. Although the report was for noatime option which is
non-functional for the nullfs, other standard options like nosuid or
noexec are useful with it.
Reported by: Dewayne Geraghty <dewayne.geraghty@heuristicsystems.com.au>
MFC after: 3 days
by returning an error of EINTR rather than EACCES.
- While here, bring back some (but not all) of the NFS RPC statistics lost
when krpc was committed.
Reviewed by: rmacklem
MFC after: 1 week
serial devices (such as printer ports). This allows ppc devices attached
to puc to correctly setup an interrupt handler and work.
Tested by: Andre Albsmeier Andre.Albsmeier@siemens.com
MFC after: 1 week
When maxusers was unrestricted and maxfiles was allowed to autotune
much higher the result was that ncallout which was based on maxfiles
and maxproc grew much higher than was needed.
To fix this clip autotuning to the same number we would get with
the old maxusers algorithm which would stop scaling at 384
maxusers.
Growing ncalout higher is not likely to be needed since most consumers
of timeout(9) are gone and any higher value for ncallout causes the
callwheel hashes to be much larger than will even be needed for
most applications.
MFC after: 1 month
Reviewed by: mav
if_start().
This removes the overlapping data path TX from occuring, which
solves quite a number of the potential TX queue races in ath(4).
It doesn't fix the net80211 layer TX queue races and it doesn't
fix the raw TX path yet, but it's an important step towards this.
This hasn't dropped the TX performance in my testing; primarily
because now the TX path can quickly queue frames and continue
along processing.
This involves a few rather deep changes:
* Use the ath_buf as a queue placeholder for now, as we need to be
able to support queuing a list of mbufs (ie, when transmitting
fragments) and m_nextpkt can't be used here (because it's what is
joining the fragments together)
* if_transmit() now simply allocates the ath_buf and queues it to
a driver TX staging queue.
* TX is now moved into a taskqueue function.
* The TX taskqueue function now dequeues and transmits frames.
* Fragments are handled correctly here - as the current API passes
the fragment list as one mbuf list (joined with m_nextpkt) through
to the driver if_transmit().
* For the couple of places where ath_start() may be called (mostly
from net80211 when starting the VAP up again), just reimplement
it using the new enqueue and taskqueue methods.
What I don't like (about this work and the TX code in general):
* I'm using the same lock for the staging TX queue management and the
actual TX. This isn't required; I'm just being slack.
* I haven't yet moved TX to a separate taskqueue (but the taskqueue is
created); it's easy enough to do this later if necessary. I just need
to make sure it's a higher priority queue, so TX has the same
behaviour as it used to (where it would preempt existing RX..)
* I need to re-review the TX path a little more and make sure that
ieee80211_node_*() functions aren't called within the TX lock.
When queueing, I should just push failed frames into a queue and
when I'm wrapping up the TX code, unlock the TX lock and
call ieee80211_node_free() on each.
* It would be nice if I could hold the TX lock for the entire
TX and TX completion, rather than this release/re-acquire behaviour.
But that requires that I shuffle around the TX completion code
to handle actual ath_buf free and net80211 callback/free outside
of the TX lock. That's one of my next projects.
* the ic_raw_xmit() path doesn't use this yet - so it still has
sequencing problems with parallel, overlapping calls to the
data path. I'll fix this later.
Tested:
* Hostap - AR9280, AR9220
* STA - AR5212, AR9280, AR5416
save queue code.
Instead, use if_transmit() directly - and handle the cases where frame
transmission fails.
I don't necessarily like this and I think at this point the M_ENCAP check,
node freeing upon fail and the actual if_transmit() call should be done
in methods in ieee80211_freebsd.c, but I digress slightly..
This removes one of the last few uses of if_start() and the ifnet
if_snd queue. The last major offender is ieee80211_output.c, where
ieee80211_start() implements if_start() and uses the ifnet queue
directly.
(There's a couple of gotchas here, where the if_start pointer is
compared to ieee80211_start(), but that's a later problem.)
CISS_MAX_LOGICAL to 107
Submitter wanted to increase the number of logical disks supported by ciss(4)
by simply raising the CISS_MAX_LOGICAL value even higher. Instead, consult
the documentation for the raid controller (OPENCISS) and poke the controller
bits to ask it for how many logical/physical disks it can handle.
Revert svn R242089 that raised CISS_MAX_LOGICAL to 64 for all controllers.
For older controllers that don't support this mechanism, fallback to the old
value of 16 logical disks. Tested on P420, P410, P400 and 6i model ciss(4)
controllers.
This should will be MFC'd back to stable/9 stable/8 and stable/7 after the MFC
period.
PR: kern/151564
Reviewed by: scottl@freebsd.org
MFC after: 2 weeks
This is the Compressed Local IPv6 table on the chip. To save space, the
chip uses an index into this table instead of a full IPv6 address in
some of its hardware data structures.
For now the driver fills this table with all the local IPv6 addresses
that it sees at the time the table is initialized. I'll improve this
later so that the table is updated whenever new IPv6 addresses are
configured or existing ones deleted.
MFC after: 1 week
as clean on shutdown and move that action from shutdown_pre_sync stage to
shutdown_post_sync to avoid extra flapping.
ZFS tends to not close devices on shutdown, that doesn't allow GEOM RAID
to shutdown gracefully. To handle that, mark volume as clean just when
shutdown time comes and there are no active writes.
MFC after: 2 weeks
as clean on shutdown and move that action from shutdown_pre_sync stage to
shutdown_post_sync to avoid extra flapping.
ZFS tends to not close devices on shutdown, that doesn't allow GEOM RAID
to shutdown gracefully. To handle that, mark volume as clean just when
shutdown time comes and there are no active writes.
PR: kern/113957
MFC after: 2 weeks
- Teach find_best_mtu_idx() to deal with IPv6 endpoints.
- Install correct protosw in offloaded TCP/IPv6 sockets when DDP is
enabled.
- Move set_tcp_ddp_ulp_mode to t4_tom.c so that t4_tom.h can be included
without having to drag in t4_msg.h too. This was bothering the iWARP
driver for some reason.
MFC after: 1 week
- Add full support for IPv6 addresses.
- Read the size of the L2 table during attach. Do not assume that PCIe
physical function 4 of the card has all of the table to itself.
- Use FNV instead of Jenkins to hash L3 addresses and drop the private
copy of jhash.h from the driver.
MFC after: 1 week
ARM EABI syscall calling convention.
The current ABI encodes the syscall number in the instruction. This causes
issues with the thumb mode as it only has 8 bits to encode this value and
we have too many system calls and by using a register will simplify the
code to get the syscall number in the kernel.
With the ARM EABI we reuse the Linux calling convention by storing the
value in r7. Because of this we use both methods to encode the syscall
number in this function.
Set the v_hash for a new vnode in the getnewvnode() to the value
calculated based on the vnode structure address. Filesystems using
vfs_hash_insert() override the v_hash using the standard formula of
(inode_number + mnt_hashseed). For other filesystems, the
initialization allows the vfs_hash_index() to provide useful hash too.
Suggested, reviewed and tested by: peter
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
padding. On the amd64 kernel with INVARIANTS turned off, size of the
struct vnode is reduced from 496 to 472 bytes, saving 24 bytes of
memory and KVA per vnode.
Noted and reviewed by: peter
Tested by: pho
Sponsored by: The FreeBSD Foundation
existing nullfs vnode by the lower vnode is only 16 slots. Since the
default mode for the nullfs is to cache the vnodes, hash has extremely
huge chains.
Size the nullfs hashtbl based on the current value of
desiredvnodes. Use vfs_hash_index() to calculate the hash bucket for a
given vnode.
Pointy hat to: kib
Diagnosed and reviewed by: peter
Tested by: peter, pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
pre-masked hash for the given vnode. The function assumes that
vp->v_hash is initialized by the filesystem vnode instantiation
function. At the moment, it is only done if filesystem uses
vfs_hash_insert().
Reviewed by: peter
Tested by: peter, pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
unsupported metadata types like Intel Smart Response to not corrupt them.
- Improve setting of these things during metadata writing to protect from
incapable BIOS'es and other implementations.
on Raspberry Pi.
o convert mmap address to physical.
o add FBIOGTYPE ioctl handler - allow to get screen resolution by new
xf86-video-scfb driver.
Originally designed for "Efika MX" project.
Sponsored by: FreeBSD Foundation
Implement an FDT attachment for altera_avgen(4).
Portions of the changeset updating DTS and device.hints will be merged
separately.
Sponsored by: DARPA, AFRL
Rework altera_avgen(4) to cleanly(ish) separate nexus bus
attachment from the driver itself. This should allow us to
plug in an fdt attachment more easily.
Sponsored by: DARPA, AFRL
Start restructuring of altera_avgen(4) so that it can have an FDT
attachment -- this requires first properly breaking out the current
nexus attachment from the driver implementation.
Sponsored by: DARPA, AFRL
Write FDT attachment for the Terasic MTL (multitouch LCD) driver.
Exploit the fact that FDT allows multiple memory ranges to be
assigned to a device, giving us a cleaner description than
device.hints does.
Portions of this changeset that remove mtl from BERI device.hints and
add to DTS will be merged separately.
Sponsored by: DARPA, AFRL
Add an Intel StrataFlash (isf) driver FDT attachment.
Portions of the original changeset hooking up FDT use for BERI will be
merged separately.
Sponsored by: DARPA, AFRL
disks should be rebuilt. Our rebuild code is same time disk-centric. To
handle this situation properly check all disks for RBLD flags, and if no
disk specified try rebuild/resync all of them except newly inserted.
Windows driver uses such migration when it creates new arrays. While GEOM
RAID has no mechanism to implement migration in general case, this specifc
case still can be handled easily via degraded RAID1 creation followed by
regular rebuild.
rather than a constant so that VM_KMEM_SIZE_MAX will scale automatically
with the kernel address space size. This is particularly important for
MIPS because the same definition is used by both 32- and 64-bit kernels.
Tested by: jchandra
unmerged BERI DTS files) to head:
Use the OFW compatible string "mips,mips4k" rather than
"mips4k,cp0" for interrupt control using MIPS4k CP0.
Suggested by: thompsa
Implement a MIPS FDT PIC decode routine to use when no PIC has been
configured, which assumes a cascade back to the nexus bus (e.g.,
the on-board CP0 interrupt management parts on the MIPS). If the
soc bus in a MIPS DTS file is declared as "mips4k,cp0"-compatible,
then this will be enabled. This is sufficient to allow IRQs to be
configured on BERI.
Sponsored by: DARPA, AFRL
This prevents quad igb card on high core machines, without any nmbcluster or
igb queue tuning wedging the boot process if all nics are configured.
Reviewed by: jfv
Approved by: pjd (mentor)
MFC after: 1 week
Provided a bus_space implementation for FDT, modelled on
bus_space_generic, but with a local version of the map address
routine that does a P->V translation, as is the case with NLM's
similar routine for XLP. It's not clear to me that this is the
right solution -- possibly this belongs in simplebus -- however,
it is sufficient to get the DE4 LED driver working.
Sponsored by: DARPA, AFRL
In a sign of weakness, replicate the MIPS bus_space_generic.c to
produce a new FDT version, which will perform necessary address
space translation for bus_space -- the solution used in NLM's MIPS
FDT support, but possibly not quite the right thing. This is
inconsistent with regular I/O via the nexus and the generic
bus_space, which instead perform translation via pmap_mapdev()
when a resource is activated. However, it will work while I
attempt to identify what the right way to reconcile possible
approaches.
(Another approach might be to make simplebus use Nexus's activate
routine instead of a generic one?)
Sponsored by: DARPA, AFRL
Add code so that the BERI boot process can ask the kernel linker for
DTB blobs that may have been left for it by the boot loader, as done
on PowerPC and ARM. This will require both a more mature boot
loader, and more mature boot loader argument passing mechanism,
than currently supported on BERI.
Sponsored by: DARPA, AFRL
Initialise Openfirmware/FDT code earlier in the FreeBSD/beri boot,
so that the results will be available for configuring the console
UART (eventually).
Suggested by: thompsa
Sponsored by: DARPA, AFRL
It is alike to RAID1, but with dedicating master and recovery disks and
providing manual control over synchronization. It allows to use recovery
disk as snapshot of the master disk from the time of the last sync.
This implementation is not functionaly complete comparing to Windows,
but it is better then silent conversion to RAID1 on first boot.
to avoid sending extra READ CAPACITY requests by dastart(). Schedule periph
again on reprobe completion, or otherwise it may stuck indefinitely long.
This should fix USB explore thread hanging on device unplug, waiting for
periph destruction.
Reported by: hselasky
on the fast data path) and use them instead of frobbing the adapter lock
and busy flag directly.
Other changes made while reworking all slow operations:
- Wait for the reply to a filter request (add/delete). This guarantees
that the operation is complete by the time the ioctl returns.
- Tidy up the tid_info structure.
- Do not allow the tx queue size to be set to something that's not a
power of 2.
MFC after: 1 week
ASUS P8Z77-V board reports _AC2, _AC3 and _AC4 setpoints as 0C. With active
cooling already automatically set to _AC2, that still caused driver to print
two useless lines about temperature above _AC3 and _AC4 every ten seconds.
Three setponts of 0C is probably a board bug, but the same spam could happen
also in correct case if system is runnign not with the lowest cooling level.
the underlying zap_count() to return no errors. However, it is possible
that the pool reaches to such a state where zap_count would return error,
leading to panics when a pool is imported.
This commit changes the ddt_zap_count to return error returned from
zap_count and handle the error appropriately. With this change, it's now
possible to let zpool rollback damaged transaction groups and import the
pool.
Obtained from: ZFS on Linux github (e8fd45a0f9)
MFC after: 1 month
false. It is right. Delete it because on the next line we catch all
'negative' cases with the test > 2, since 'negative' numbers are just
really big unsigned numbers and we do an identical action.
get back the leased write reference from the lower vnode. There is no
other path which can correct v_writecount on the lowervp.
Reported by: flo
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
and da_default_timeout where their current hardcoded values matched the current
default value for said tunables.
PR: kern/169976
Reviewed by: pjd (mentor)
Approved by: mav
DISKFLAG_CANDELETE. While this change makes this layer consistent
other layers such as UFS and ZFS BIO_DELETE support may not notice
any change made manually via these device sysctls until the device
is reopened via a mount.
Also corrected var order in dadeletemethodsysctl
PR: kern/169801
Reviewed by: pjd (mentor)
Approved by: mav
MFC after: 2 weeks
Factor out USB mouse and keyboard detection logic.
Reject USB keyboards which have mouse alike HID items
in their HID descriptors.
Submitted by: Matthew W
MFC after: 1 week
Currently we use interface indeces as zone IDs for link-local and
interface-local scopes, and since we don't have any tool to configure
zone IDs, there is no need to acquire the afdata lock several times per
packet only to read if_index value.
So, now in6_setscope reads zone IDs for interface-local, link-local and
global scopes without a lock.
Sponsored by: Yandex LLC
MFC after: 2 weeks
resources are partitioned.
- Reduce the number of virtual interfaces reserved for PF4. This leaves
spare room in the source MAC table and allows the driver to setup
filters that rewrite the source MAC address.
- Reduce the number of filters and use the freed up space for the CLIP
(Compressed Local IPv6 addresses) table. This is a prerequisite for
IPv6 TOE support which will follow separately in a series of commits.
MFC after: 1 week
SYNs (or SYN/ACK replies) are dropped due to network congestion, then the
remote end of the connection may act as if options such as window scaling
are enabled but the local end will think they are not. This can result in
very slow data transfers in the case of window scaling disagreements.
The old behavior can be obtained by setting the
net.inet.tcp.rexmit_drop_options sysctl to a non-zero value.
Reviewed by: net@
MFC after: 2 weeks
