ephemeral mappings that are used as the source for three copy
operations from kernel space to user space. There are two reasons for
making this change: (1) Under heavy load exec_map can fill up causing
vm_map_find() to fail. When it fails, the nascent process is aborted
(SIGABRT). Whereas, this reimplementation using sf_buf_alloc()
sleeps. (2) Although it is possible to sleep on vm_map_find()'s
failure until address space becomes available (see kmem_alloc_wait()),
using sf_buf_alloc() is faster. Furthermore, the reimplementation
uses a CPU private mapping, avoiding a TLB shootdown on
multiprocessors.
Problem uncovered by: kris@
Reviewed by: tegge@
MFC after: 3 weeks
reclamation synchronously from get_pv_entry() instead of
asynchronously as part of the page daemon. Additionally, limit the
reclamation to inactive pages unless allocation from the PV entry zone
or reclamation from the inactive queue fails. Previously, reclamation
destroyed mappings to both inactive and active pages. get_pv_entry()
still, however, wakes up the page daemon when reclamation occurs. The
reason being that the page daemon may move some pages from the active
queue to the inactive queue, making some new pages available to future
reclamations.
Print the "reclaiming PV entries" message at most once per minute, but
don't stop printing it after the fifth time. This way, we do not give
the impression that the problem has gone away.
Reviewed by: tegge
by the zero-copy sockets method, and written to before the transmission
completes, we need to destroy all of the existing mappings to the page,
not just the one that we fault on. Otherwise, the mappings will no longer
be to the same page and changes made through one of the mappings will not
be visible through the others.
Observed by: tegge
If a copy-on-write fault occurs on the page, the new copy should inherit
a part of the original page's wire count.
Submitted by: tegge
MFC after: 1 week
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
vm_object_backing_scan() was not written to handle. Specifically, a wired
page within a backing object that is shadowed by a page within the shadow
object. Handle this state by removing the wired page from the backing
object. The wired page will be freed by socow_iodone().
Stop masking errors: If a page is being freed by vm_object_backing_scan(),
assert that it is no longer mapped rather than quietly destroying any
mappings.
Tested by: Harald Schmalzbauer
Before this change a copy operation with cp(1) would not update the
file access times.
According to the POSIX mmap(2) documentation: the st_atime field
of the mapped file may be marked for update at any time between the
mmap() call and the corresponding munmap() call. The initial read
or write reference to a mapped region shall cause the file's st_atime
field to be marked for update if it has not already been marked for
update.
I'm not sure this is the right thing to do, but at least I don't panic
anymore when swapping on a NFS file without using md(4).
X-MFC after: proper review
UMA boot pages.
Disable recursion on the general UMA lock now that startup_alloc() no
longer uses it.
Eliminate the variable uma_boot_free. It serves no purpose.
Note: This change eliminates a lock-order reversal between a system
map mutex and the UMA lock. See
http://sources.zabbadoz.net/freebsd/lor.html#109 for details.
MFC after: 3 days
vm_pager_init() is run before required nswbuf variable has been set
to correct value. This caused system to run with single pbuf available
for vnode_pager. Handle both cluster_pbuf_freecnt and vnode_pbuf_freecnt
variable in the same way.
Reported by: ade
Obtained from: alc
MFC after: 2 days
due to the vm object being locked.
When a process writes large amounts of data to a file, the vm object associated
with that file can contain most of the physical pages on the machine. If the
process is preempted while holding the lock on the vm object, pagedaemon would
be able to move very few pages from PQ_INACTIVE to PQ_CACHE or from PQ_ACTIVE
to PQ_INACTIVE, resulting in unlimited cleaning of dirty pages belonging to
other vm objects.
Temporarily unlock the page queues lock while locking vm objects to avoid lock
order violation. Detect and handle relevant page queue changes.
This change depends on both the lock portion of struct vm_object and normal
struct vm_page being type stable.
Reviewed by: alc
as opt_vmpage.h will not be available to user space library builds. A
similar existing check is present for KLD_MODULE for similar reasons.
MFC after: 3 days
monitoring API, which might or might not be the same as the internal
maximum (currently none).
Export flag information on UMA zones -- in particular, whether or
not this is a secondary zone, and so the keg free count should be
considered in that light.
MFC after: 1 day
make the b_iodone callback responsible for setting it if it is needed.
Previously, it was set unconditionally by bufdone() without holding
whichever lock is shared by the b_iodone callback and the corresponding
top-half function. Consequently, in a race, the top-half function could
conclude that operation was done before the b_iodone callback finished.
See, for example, aio_physwakeup() and aio_fphysio().
Note: I don't believe that the other, more widely-used b_iodone callbacks
are affected.
Discussed with: jeff
Reviewed by: phk
MFC after: 2 weeks
- Add a new uma_zfree_internal() flag, ZFREE_STATFREE, which causes it to
to update the zone's uz_frees statistic. Previously, the statistic was
updated unconditionally.
- Use the flag in situations where a "real" free occurs: i.e., one where
the caller is freeing an allocated item, to be differentiated from
situations where uma_zfree_internal() is used to tear down the item
during slab teardown in order to invoke its fini() method. Also use
the flag when UMA is freeing its internal objects.
- When exchanging a bucket with the zone from the per-CPU cache when
freeing an item, flush cache statistics back to the zone (since the
zone lock and critical section are both held) to match the allocation
case.
MFC after: 3 days
per-CPU cache statistics. UMA sizes the cache array based on the
number of CPUs at boot (mp_maxid + 1), and iterating based on MAXCPU
could read off the end of the array (into the next zone).
Reported by: yongari
MFC after: 1 week
it covers the following of the uc_alloc/freebucket cache pointers.
Originally, I felt that the race wasn't helped by holding the mutex,
hence a comment in the code and not holding it across the cache access.
However, it does improve consistency, as while it doesn't prevent
bucket exchange, it does prevent bucket pointer invalidation. So a
race in gathering cache free space statistics still can occur, but not
one that follows an invalid bucket pointer, if the mutex is held.
Submitted by: yongari
MFC after: 1 week
fs.first_object->flags & OBJ_NEEDGIANT test that was missed in an earlier
revision. This fixes mutex assertion failures in the debug.mpsafevm=0
case.
Reported by: ps
MFC after: 3 days
statistics via a binary structure stream:
- Add structure 'uma_stream_header', which defines a stream version,
definition of MAXCPUs used in the stream, and the number of zone
records in the stream.
- Add structure 'uma_type_header', which defines the name, alignment,
size, resource allocation limits, current pages allocated, preferred
bucket size, and central zone + keg statistics.
- Add structure 'uma_percpu_stat', which, for each per-CPU cache,
includes the number of allocations and frees, as well as the number
of free items in the cache.
- When the sysctl is queried, return a stream header, followed by a
series of type descriptions, each consisting of a type header
followed by a series of MAXCPUs uma_percpu_stat structures holding
per-CPU allocation information. Typical values of MAXCPU will be
1 (UP compiled kernel) and 16 (SMP compiled kernel).
This query mechanism allows user space monitoring tools to extract
memory allocation statistics in a machine-readable form, and to do so
at a per-CPU granularity, allowing monitoring of allocation patterns
across CPUs in order to better understand the distribution of work and
memory flow over multiple CPUs.
While here, also export the number of UMA zones as a sysctl
vm.uma_count, in order to assist in sizing user swpace buffers to
receive the stream.
A follow-up commit of libmemstat(3), a library to monitor kernel memory
allocation, will occur in the next few days. This change directly
supports converting netstat(1)'s "-mb" mode to using UMA-sourced stats
rather than separately maintained mbuf allocator statistics.
MFC after: 1 week
zone whenever it was moving buckets between the zone and the cache,
or when coalescing statistics across the CPU. Remove flushing of
statistics to the zone when coalescing statistics as part of sysctl,
as we won't be running on the right CPU to write to the cache
statistics.
Add a missed gathering of statistics: when uma_zalloc_internal()
does a special case allocation of a single item, make sure to update
the zone statistics to represent this. Previously this case wasn't
accounted for in user-visible statistics.
MFC after: 1 week
many regions checked again and again despite knowing the pages
contained were not usable and only satisfied the alignment constraints
This case was compounded, especially for large allocations, by the
practice of looping from the top of memory so as to keep out of the
important low-memory regions. While the old contigmalloc(9) has the
same problem, it is not as noticeable due to looping from the low
memory to high.
This degenerate case is fixed, as well as reversing the sense of the
rest of the loops within it, to provide a tremendous speed increase.
This makes the best case O(n * VM overhead) much more likely than the
worst case O(4 * VM overhead). For comparison, the worst case for old
contigmalloc would be O(5 * VM overhead) in addition to its strategy
of turning used memory into free being highly pessimal.
Also, fix a bug that in practice most likely couldn't have been triggered,
int the new contigmalloc(9): it walked backwards from the end of memory
without accounting for how many pages it needed. Potentially, nonexistant
pages could have been mapped. This hasn't occurred because the kernel
generally requests as its first contigmalloc(9) a single page.
Reported by: Nicolas Dehaine <nicko@stbernard.com>, wes
MFC After: 1 month
More testing by: Nicolas Dehaine <nicko@stbernard.com>, wes
vm_page's machine-dependent fields. Use this function in
vm_pageq_add_new_page() so that the vm_page's machine-dependent and
machine-independent fields are initialized at the same time.
Remove code from pmap_init() for initializing the vm_page's
machine-dependent fields.
Remove stale comments from pmap_init().
Eliminate the Boolean variable pmap_initialized from the alpha, amd64,
i386, and ia64 pmap implementations. Its use is no longer required
because of the above changes and earlier changes that result in physical
memory that is being mapped at initialization time being mapped without
pv entries.
Tested by: cognet, kensmith, marcel
underlying vnode requires Giant.
- In vm_fault only acquire Giant if the underlying object has NEEDSGIANT
set.
- In vm_object_shadow inherit the NEEDSGIANT flag from the backing object.
mutexes, which offers lower overhead on both UP and SMP. When allocating
from or freeing to the per-cpu cache, without INVARIANTS enabled, we now
no longer perform any mutex operations, which offers a 1%-3% performance
improvement in a variety of micro-benchmarks. We rely on critical
sections to prevent (a) preemption resulting in reentrant access to UMA on
a single CPU, and (b) migration of the thread during access. In the event
we need to go back to the zone for a new bucket, we release the critical
section to acquire the global zone mutex, and must re-acquire the critical
section and re-evaluate which cache we are accessing in case migration has
occured, or circumstances have changed in the current cache.
Per-CPU cache statistics are now gathered lock-free by the sysctl, which
can result in small races in statistics reporting for caches.
Reviewed by: bmilekic, jeff (somewhat)
Tested by: rwatson, kris, gnn, scottl, mike at sentex dot net, others
the number of entries in exec_map (maximum number of simultaneous execs
that can be handled by the kernel). The default value of 16 is
insufficient on heavily loaded machines (particularly SMP machines), and
if it is exceeded then executing further processes will generate a SIGABRT.
This is a workaround until a better solution can be implemented.
Reviewed by: alc
MFC after: 3 days
of physical addresses. The pages containing these physical addresses will
not be added to the free list and thus will effectively be ignored by the
VM system. This is mostly useful for the case when one knows of specific
physical addresses that have bit errors (such as from a memtest run) so
that one can blacklist the bad pages while waiting for the new sticks of
RAM to arrive. The physical addresses of any ignored pages are listed in
the message buffer as well.
MAP_SHARED so that the entry point gets executed un-conditionally.
This may be useful for security policies which want to perform access
control checks around run-time linking.
-add the mmap(2) flags argument to the check_vnode_mmap entry point
so that we can make access control decisions based on the type of
mapped object.
-update any dependent API around this parameter addition such as
function prototype modifications, entry point parameter additions
and the inclusion of sys/mman.h header file.
-Change the MLS, BIBA and LOMAC security policies so that subject
domination routines are not executed unless the type of mapping is
shared. This is done to maintain compatibility between the old
vm_mmap_vnode(9) and these policies.
Reviewed by: rwatson
MFC after: 1 month
down. If we have dirty pages, the putpages routine will need to know
what the vnode's object is so that it may write out dirty pages.
Pointy hat: phk
Found by: obrien
the type of object represented by the handle argument.
- Allow vm_mmap() to map device memory via cdev objects in addition to
vnodes and anonymous memory. Note that mmaping a cdev directly does not
currently perform any MAC checks like mapping a vnode does.
- Unbreak the DRM getbufs ioctl by having it call vm_mmap() directly on the
cdev the ioctl is acting on rather than trying to find a suitable vnode
to map from.
Reviewed by: alc, arch@
queues lock in vm_object_backing_scan(). Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.
Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary. There is no reason why the held
or wired pages cannot be migrated to the shadow object.
Reviewed by: tegge
is inserted.
- In vm_page_remove() drop the backing vnode when the last page
is removed.
- Don't check the vnode to see if it must be reclaimed on every
call to vm_page_free_toq() as we only check it now when it is
actually required. This saves us two lock operations per call.
Sponsored by: Isilon Systems, Inc.
patch from kan@).
Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close. This is not yet a generally safe function, but for this very
specific use it is safe. This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
statement from some files, so re-add it for the moment, until the
related legalese is sorted out. This change affects:
sys/kern/kern_mbuf.c
sys/vm/memguard.c
sys/vm/memguard.h
sys/vm/uma.h
sys/vm/uma_core.c
sys/vm/uma_dbg.c
sys/vm/uma_dbg.h
sys/vm/uma_int.h
UMA_ZONE_REFCNT and UMA_ZONE_MALLOC zones, as the page(s) undoubtedly
came from kmem_map for those two. Previously it would set it back
to NULL for UMA_ZONE_REFCNT zones and although this was probably not
fatal, it added MORE code for no reason.
an unused pageq queue reference in the page structure to stash a pointer
to the MemGuard FIFO. Using the page->object field caused problems
because when vm_map_protect() was called the second time to set
VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection
in the VM would be changed but the PMAP code would lazily not restore
the PG_RW bit on the underlying pages right away (see pmap_protect()).
So when a page fault finally occured and the VM noticed the faulting
address corresponds to a page that _does_ have write access now, it
would then call into PMAP to set back PG_RW (i386 case being discussed
here). However, before it got to do that, an assertion on the object
lock not being owned would get triggered, as the object of the faulting
page would need to be locked but was overloaded by MemGuard. This is
precisely why MemGuard cannot overload page->object.
Submitted by: Alan Cox (alc@)
a little bit of complexity but performance requirements lacking (this is
a debugging allocator after all), it's really not too bad (still
only 317 lines).
Also add an additional check to help catch really weird 3-threads-involved
races: make memguard_free() write to the first page handed back, always,
before it does anything else.
Note that there is still a problem in VM+PMAP (specifically with
vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly
and this change stands on its own.
the name Sande^H^H^H^H^Hvnode_create_vobject().
Make the new function take a size argument which removes the need for
a VOP_STAT() or a very pessimistic guess for disks.
Call that new function from vop_stdcreatevobject().
Make vnode_pager_alloc() private now that its only user came home.
- Use VFS_LOCK_GIANT() rather than directly acquiring giant in places
where giant is only held because vfs requires it.
Sponsored By: Isilon Systems, Inc.
designed to help detect tamper-after-free scenarios, a problem more
and more common and likely with multithreaded kernels where race
conditions are more prevalent.
Currently MemGuard can only take over malloc()/realloc()/free() for
particular (a) malloc type(s) and the code brought in with this
change manually instruments it to take over M_SUBPROC allocations
as an example. If you are planning to use it, for now you must:
1) Put "options DEBUG_MEMGUARD" in your kernel config.
2) Edit src/sys/kern/kern_malloc.c manually, look for
"XXX CHANGEME" and replace the M_SUBPROC comparison with
the appropriate malloc type (this might require additional
but small/simple code modification if, say, the malloc type
is declared out of scope).
3) Build and install your kernel. Tune vm.memguard_divisor
boot-time tunable which is used to scale how much of kmem_map
you want to allott for MemGuard's use. The default is 10,
so kmem_size/10.
ToDo:
1) Bring in a memguard(9) man page.
2) Better instrumentation (e.g., boot-time) of MemGuard taking
over malloc types.
3) Teach UMA about MemGuard to allow MemGuard to override zone
allocations too.
4) Improve MemGuard if necessary.
This work is partly based on some old patches from Ian Dowse.
and BBO is BO's backing object. Now, suppose that O and BO are being
collapsed. Furthermore, suppose that BO has been marked dead
(OBJ_DEAD) by vm_object_backing_scan() and that either
vm_object_backing_scan() has been forced to sleep due to encountering
a busy page or vm_object_collapse() has been forced to sleep due to
memory allocation in the swap pager. If vm_object_deallocate() is
then called on BBO and BO is BBO's only shadow object,
vm_object_deallocate() will collapse BO and BBO. In doing so, it adds
a necessary temporary reference to BO. If this collapse also sleeps
and the prior collapse resumes first, the temporary reference will
cause vm_object_collapse to panic with the message "backing_object %p
was somehow re-referenced during collapse!"
Resolve this race by changing vm_object_deallocate() such that it
doesn't collapse BO and BBO if BO is marked dead. Once O and BO are
collapsed, vm_object_collapse() will attempt to collapse O and BBO.
So, vm_object_deallocate() on BBO need do nothing.
Reported by: Peter Holm on 20050107
URL: http://www.holm.cc/stress/log/cons102.html
In collaboration with: tegge@
Candidate for RELENG_4 and RELENG_5
MFC after: 2 weeks
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
recursion from the VM is handled (and the calling code that allocates
buckets knows how to deal with it), we do not want to prevent allocation
from the slab header zones (slabzone and slabrefzone) if uk_recurse is
not zero for them. The reason is that it could lead to NULL being
returned for the slab header allocations even in the M_WAITOK
case, and the caller can't handle that (this is also explained in a
comment with this commit).
The problem analysis is documented in our mailing lists:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=153445+0+archive/2004/freebsd-current/20041231.freebsd-current
(see entire thread for proper context).
Crash dump data provided by: Peter Holm <peter@holm.cc>
queue and (possibly) unlocking the containing object from
vm_page_alloc() to vm_page_select_cache(). Recent optimizations to
vm_map_pmap_enter() (see vm_map.c revisions 1.362 and 1.363) and
pmap_enter_quick() have resulted in panic()s because vm_page_alloc()
mistakenly unlocked objects that had not been locked by
vm_page_select_cache().
Reported by: Peter Holm and Kris Kennaway
queue to the free queue. With this change, if a page from the cache
queue belongs to a locked object, it is simply skipped over rather
than moved to the inactive queue.
flag and busy field with the global page queues lock to synchronizing their
access with the containing object's lock. Specifically, acquire the
containing object's lock before reading the page's PG_BUSY flag and busy
field in vm_fault().
Reviewed by: tegge@
on entry and it assumes the responsibility for releasing the page queues
lock if it must sleep.
Remove a bogus comment from pmap_enter_quick().
Using the first change, modify vm_map_pmap_enter() so that the page queues
lock is acquired and released once, rather than each time that a page
is mapped.
In such cases, the busying of the page and the unlocking of the
containing object by vm_map_pmap_enter() and vm_fault_prefault() is
unnecessary overhead. To eliminate this overhead, this change
modifies pmap_enter_quick() so that it expects the object to be locked
on entry and it assumes the responsibility for busying the page and
unlocking the object if it must sleep. Note: alpha, amd64, i386 and
ia64 are the only implementations optimized by this change; arm,
powerpc, and sparc64 still conservatively busy the page and unlock the
object within every pmap_enter_quick() call.
Additionally, this change is the first case where we synchronize
access to the page's PG_BUSY flag and busy field using the containing
object's lock rather than the global page queues lock. (Modifications
to the page's PG_BUSY flag and busy field have asserted both locks for
several weeks, enabling an incremental transition.)
revision 1.55, the address parameter to vnode_pager_addr() was changed
from an unsigned 32-bit quantity to a signed 64-bit quantity. However,
an out-of-range check on the address was not updated. Consequently,
memory-mapped I/O on files greater than 2GB could cause a kernel panic.
Since the address is now a signed 64-bit quantity, the problem resolution
is simply to remove a cast.
Reviewed by: bde@ and tegge@
PR: 73010
MFC after: 1 week
to implement the sanity check should have been changed when we converted
the implementation of vm_pindex_t from 32 to 64 bits. (Thus, RELENG_4 is
not affected.) The consequence of this error would be a legimate write to
an extremely large file being treated as an errant attempt to write meta-
data.
Discussed with: tegge@
Historically, our contigmalloc1() and contigmalloc2() assumes
that a page in PQ_CACHE can be unconditionally reused by busying
and freeing it. Unfortunatelly, when object happens to be not
NULL, the code will set m->object to NULL and disregard the fact
that the page is actually in the VM page bucket, resulting in
page bucket hash table corruption and finally, a filesystem
corruption, or a 'page not in hash' panic.
This commit has borrowed the idea taken from DragonFlyBSD's fix
to the VM fix by Matthew Dillon[1]. This version of patch will
do the following checks:
- When scanning pages in PQ_CACHE, check hold_count and
skip over pages that are held temporarily.
- For pages in PQ_CACHE and selected as candidate of being
freed, check if it is busy at that time.
Note: It seems that this is might be unrelated to kern/72539.
Obtained from: DragonFlyBSD, sys/vm/vm_contig.c,v 1.11 and 1.12 [1]
Reminded by: Matt Dillon
Reworked by: alc
MFC After: 1 week
instead of a vnode for it.
The vnode_pager does not and should not have any interest in what
the filesystem uses for backend.
(vfs_cluster doesn't use the backing store argument.)
includes the latter, but also declares variables which are defined
in kern/subr_param.c).
Change som VM parameters from quad_t to unsigned long. They refer to
quantities (size limits for text, heap and stack segments) which must
necessarily be smaller than the size of the address space, so long is
adequate on all platforms.
MFC after: 1 week
number of entries into bucket_zone_lookup(), which helps make more
clear the logic of consumers of bucket zones.
Annotate the behavior of bucket_init() with a comment indicating
how the various data structures, including the bucket lookup tables,
are initialized.
swapoff: failed to locate %d swap blocks
The race occurred because putpages() can block between the time it
allocates swap space and the time it updates the swap metadata to
associate that space with a vm_object, so swapoff() would complain
about the temporary inconsistency. I hoped to fix this by making
swp_pager_getswapspace() and swp_pager_meta_build() a single atomic
operation, but that proved to be inconvenient. With this change,
swapoff() simply doesn't attempt to be so clever about detecting when
all the pageout activity to the target device should have drained.
because this call is only needed to wake threads that slept when they
discovered a dead object connected to a vnode. To eliminate unnecessary
calls to wakeup() by vnode_pager_dealloc(), introduce a new flag,
OBJ_DISCONNECTWNT.
Reviewed by: tegge@
thread is created rather than adjusting the priority in the main
function. (kthread_create() should probably take the initial priority
as an argument.)
- Only yield the CPU in the !PREEMPTION case if there are any other
runnable threads. Yielding when there isn't anything else better to do
just wastes time in pointless context switches (albeit while the system
is idle.)
In order to avoid livelock, swapoff() skips over objects with a
nonzero pip count and makes another pass if necessary. Since it is
impossible to know which objects we care about, it would choose an
arbitrary object with a nonzero pip count and wait for it before
making another pass, the theory being that this object would finish
paging about as quickly as the ones we care about. Unfortunately,
we may have slept since we acquired a reference to this object.
Hack around this problem by tsleep()ing on the pointer anyway, but
timeout after a fixed interval. More elegant solutions are possible,
but the ones I considered unnecessarily complicate this rare case.
Also, kill some nits that seem to have crept into the swapoff() code
in the last 75 revisions or so:
- Don't pass both sp and sp->sw_used to swap_pager_swapoff(), since
the latter can be derived from the former.
- Replace swp_pager_find_dev() with something simpler. There's no
need to iterate over the entire list of swap devices just to determine
if a given block is assigned to the one we're interested in.
- Expand the scope of the swhash_mtx in a couple of places so that it
isn't released and reacquired once for every hash bucket.
- Don't drop the swhash_mtx while holding a reference to an object.
We need to lock the object first. Unfortunately, doing so would
violate the established lock order, so use VM_OBJECT_TRYLOCK() and
try again on a subsequent pass if the object is already locked.
- Refactor swp_pager_force_pagein() and swap_pager_swapoff() a bit.
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
IF INVARIANTS is defined, and in the rare case that we have
allocated some objects from the slab and at least one initializer
on at least one of those objects failed, and we need to fail the
allocation and push the uninitialized items back into the slab
caches -- in that scenario, we would fail to [re]set the
bucket cache's ub_bucket item references to NULL, which would
eventually trigger a KASSERT.
We keep si_bsize_phys around for now as that is the simplest way to pull
the number out of disk device drivers in devfs_open(). The correct solution
would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth
when filesystems sit on GEOM, so don't bother for now.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
vm_page_sleep_if_busy(). (The motivation being to transition
synchronization of the vm_page's PG_BUSY flag from the global page queues
lock to the per-object lock.)
that indicates that the caller does not want a page with its busy flag set.
In many places, the global page queues lock is acquired and released just
to clear the busy flag on a just allocated page. Both the allocation of
the page and the clearing of the busy flag occur while the containing vm
object is locked. So, the busy flag might as well never be set.
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write
count on a bufobj. Bufobj_wdrop() replaces vwakeup().
Use these functions all relevant places except in ffs_softdep.c where
the use if interlocked_sleep() makes this impossible.
Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
errors are in rarely executed paths.
1. Each time the retry_alloc path is taken, the PG_BUSY must be set again.
Otherwise vm_page_remove() panics.
2. There is no need to set PG_BUSY on the newly allocated page before
freeing it. The page already has PG_BUSY set by vm_page_alloc().
Setting it again could cause an assertion failure.
MFC after: 2 weeks
vm_page_io_finish(). The motivation being to transition synchronization of
the vm_page's busy field from the global page queues lock to the per-object
lock.
sysctl routines and state. Add some code to use it for signalling the need
to downconvert a data structure to 32 bits on a 64 bit OS when requested by
a 32 bit app.
I tried to do this in a generic abi wrapper that intercepted the sysctl
oid's, or looked up the format string etc, but it was a real can of worms
that turned into a fragile mess before I even got it partially working.
With this, we can now run 'sysctl -a' on a 32 bit sysctl binary and have
it not abort. Things like netstat, ps, etc have a long way to go.
This also fixes a bug in the kern.ps_strings and kern.usrstack hacks.
These do matter very much because they are used by libc_r and other things.
state management corruption, mbuf leaks, general mbuf corruption,
and at least on i386 a first level splash damage radius that
encompasses up to about half a megabyte of the memory after
an mbuf cluster's allocation slab. In short, this has caused
instability nightmares anywhere the right kind of network traffic
is present.
When the polymorphic refcount slabs were added to UMA, the new types
were not used pervasively. In particular, the slab management
structure was turned into one for refcounts, and one for non-refcounts
(supposed to be mostly like the old slab management structure),
but the latter was almost always used through out. In general, every
access to zones with UMA_ZONE_REFCNT turned on corrupted the
"next free" slab offset offset and the refcount with each other and
with other allocations (on i386, 2 mbuf clusters per 4096 byte slab).
Fix things so that the right type is used to access refcounted zones
where it was not before. There are additional errors in gross
overestimation of padding, it seems, that would cause a large kegs
(nee zones) to be allocated when small ones would do. Unless I have
analyzed this incorrectly, it is not directly harmful.
frobbing the cdevsw.
In both cases we examine only the cdevsw and it is a good question if we
weren't better off copying those properties into the cdev in the first
place. This question will be revisited.
UMA_ZONE_NOFREE to guarantee type stability, so proc_fini() should
never be called. Move an assertion from proc_fini() to proc_dtor()
and garbage-collect the rest of the unreachable code. I have retained
vm_proc_dispose(), since I consider its disuse a bug.
and which takes a M_WAITOK/M_NOWAIT flag argument.
Add compatibility isa_dmainit() macro which whines loudly if
isa_dma_init() fails.
Problem uncovered by: tegge
write and zero-fill faults to run without holding Giant. It is still
possible to disable Giant-free operation by setting debug.mpsafevm to 0 in
loader.conf.
FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is
enabled (code inspired by the PREEMPTION warning in kern_switch.c). This
is a possible MT5 candidate.
page zeroing thread before it has been created. It was possible for
calls to free() very early in the boot process to panic here because
the sleep queues were not yet initialised. Specifically, sysinit_add()
running at SI_SUB_KLD would trigger this if the array of pointers
became big enough to require uma_large_alloc() allocations.
Submitted by: peter
position that is 64-bit aligned and makes sure that the valid and
dirty fields are also 64-bit aligned. This means that if PAGE_SIZE
is 32K, the size of the vm_page structure is only increased by 8
bytes instead of 16 bytes. More importantly, the vm_page structure
is either 120 or 128 bytes on ia64. These are "interesting" sizes.
manipulating a vnode, e.g., calling vput(). This reduces contention for
Giant during many copy-on-write faults, resulting in some additional
speedup on SMPs.
Note: debug_mpsafevm must be enabled for this optimization to take effect.
"debug.mpsafevm" results in (almost) Giant-free execution of zero-fill
page faults. (Giant is held only briefly, just long enough to determine
if there is a vnode backing the faulting address.)
Also, condition the acquisition and release of Giant around calls to
pmap_remove() on "debug.mpsafevm".
The effect on performance is significant. On my dual Opteron, I see a
3.6% reduction in "buildworld" time.
- Use atomic operations to update several counters in vm_fault().
wait for system wires to disappear, do so (much more trivially) by
instead only checking for system wires of user maps and not kernel maps.
Alternative by: tor
Reviewed by: alc
algorithm built into the map entry splay tree. This replaces the
first_free hint in struct vm_map with two fields in vm_map_entry:
adj_free, the amount of free space following a map entry, and
max_free, the maximum amount of free space in the entry's subtree.
These fields make it possible to find a first-fit free region of a
given size in one pass down the tree, so O(log n) amortized using
splay trees.
This significantly reduces the overhead in vm_map_findspace() for
applications that mmap() many hundreds or thousands of regions, and
has a negligible slowdown (0.1%) on buildworld. See, for example, the
discussion of a micro-benchmark titled "Some mmap observations
compared to Linux 2.6/OpenBSD" on -hackers in late October 2003.
OpenBSD adopted this approach in March 2002, and NetBSD added it in
November 2003, both with Red-Black trees.
Submitted by: Mark W. Krentel
to avoid later changes before pmap_enter() and vm_fault_prefault()
has completed.
Simplify deadlock avoidance by not blocking on vm map relookup.
In collaboration with: alc
* Allow no-fault wiring/unwiring to succeed for consistency;
however, the wired count remains at zero, so it's a special case.
* Fix issues inside vm_map_wire() and vm_map_unwire() where the
exact state of user wiring (one or zero) and system wiring
(zero or more) could be confused; for example, system unwiring
could succeed in removing a user wire, instead of being an
error.
* Require all mappings to be unwired before they are deleted.
When VM space is still wired upon deletion, it will be waited
upon for the following unwire. This makes vslock(9) work
rather than allowing kernel-locked memory to be deleted
out from underneath of its consumer as it would before.
1. Move a comment to its proper place, updating it. (Except for white-
space, this comment had been unchanged since revision 1.1!)
2. Remove spl calls.
should be set to VM_PAGE_BITS_ALL before returning, to ensure that
neither vm_pager_get_pages nor vm_fault calls vm_page_zero_invalid
after dev_pager_getpages has returned.
Submitted by: tegge
so that they know whether the allocation is supposed to be able to sleep
or not.
* Allow uma_zone constructors and initialation functions to return either
success or error. Almost all of the ones in the tree currently return
success unconditionally, but mbuf is a notable exception: the packet
zone constructor wants to be able to fail if it cannot suballocate an
mbuf cluster, and the mbuf allocators want to be able to fail in general
in a MAC kernel if the MAC mbuf initializer fails. This fixes the
panics people are seeing when they run out of memory for mbuf clusters.
* Allow debug.nosleepwithlocks on WITNESS to be disabled, without changing
the default.
Both bmilekic and jeff have reviewed the changes made to make failable
zone allocations work.
those architectures without pmap locking.
- Eliminate the acquisition and release of Giant from vm_map_protect().
(Translation: mprotect(2) runs to completion without touching Giant on
alpha, amd64, i386 and ia64.)
maps. We always acquire the sx lock exclusively here, but we can't
use a mutex because we want to be able to sleep while holding the
lock. This is completely equivalent to what we were doing with the
lockmgr(9) locks before.
Approved by: alc
- Enable recursion on the page queues lock. This allows calls to
vm_page_alloc(VM_ALLOC_NORMAL) and UMA's obj_alloc() with the page
queues lock held. Such calls are made to allocate page table pages
and pv entries.
- The previous change enables a partial reversion of vm/vm_page.c
revision 1.216, i.e., the call to vm_page_alloc() by vm_page_cowfault()
now specifies VM_ALLOC_NORMAL rather than VM_ALLOC_INTERRUPT.
- Add partial locking to pmap_copy(). (As a side-effect, pmap_copy()
should now be faster on i386 SMP because it no longer generates IPIs
for TLB shootdown on the other processors.)
- Complete the locking of pmap_enter() and pmap_enter_quick(). (As of now,
all changes to a user-level pmap on alpha, amd64, and i386 are performed
with appropriate locking.)
- zone_large_init() stays pretty much the same.
- zone_small_init() will try to stash the slab header in the slab page
being allocated if the amount of calculated wasted space is less
than UMA_MAX_WASTE (for both the UMA_ZONE_REFCNT case and regular
case). If the amount of wasted space is >= UMA_MAX_WASTE, then
UMA_ZONE_OFFPAGE will be set and the slab header will be allocated
separately for better use of space.
- uma_startup() calculates the maximum ipers required in offpage slabs
(so that the offpage slab header zone(s) can be sized accordingly).
The algorithm used to calculate this replaces the old calculation
(which only happened to work coincidentally). We now iterate over
possible object sizes, starting from the smallest one, until we
determine that wastedspace calculated in zone_small_init() might
end up being greater than UMA_MAX_WASTE, at which point we use the
found object size to compute the maximum possible ipers. The
reason this works is because:
- wastedspace versus objectsize is a see-saw function with
local minima all equal to zero and local maxima growing
directly proportioned to objectsize. This implies that
for objects up to or equal a certain objectsize, the see-saw
remains entirely below UMA_MAX_WASTE, so for those objectsizes
it is impossible to ever go OFFPAGE for slab headers.
- ipers (items-per-slab) versus objectsize is an inversely
proportional function which falls off very quickly (very large
for small objectsizes).
- To determine the maximum ipers we'll ever need from OFFPAGE
slab headers we first find the largest objectsize for which
we are guaranteed to not go offpage for and use it to compute
ipers (as though we were offpage). Since the only objectsizes
allowed to go offpage are bigger than the found objectsize,
and since ipers vs objectsize is inversely proportional (and
monotonically decreasing), then we are guaranteed that the
ipers computed is always >= what we will ever need in offpage
slab headers.
- Define UMA_FRITM_SZ and UMA_FRITMREF_SZ to be the actual (possibly
padded) size of each freelist index so that offset calculations are
fixed.
This might fix weird data corruption problems and certainly allows
ARM to now boot to at least single-user (via simulator).
Tested on i386 UP by me.
Tested on sparc64 SMP by fenner.
Tested on ARM simulator to single-user by cognet.
vm/vm_object.c revision 1.88) and vm_object_sync() (originating in
vm/vm_map.c revision 1.36): When descending a chain of backing objects,
both use the wrong object's backing offset. Consequently, both may
operate on the wrong pages.
Quoting Matt, "This could be responsible for all of the sporatic madvise
oddness that has been reported over the years."
Reviewed by: Matt Dillon
- Push down Giant into shmexit(). (Giant is acquired only if the vmspace
contains shm segments.)
- Eliminate the acquisition of Giant from proc_rwmem().
- Reduce the scope of Giant in exit1(), uncovering the destruction of the
address space.
vmspace to the new vmspace in vmspace_exec() is mostly wasted effort. With
one exception, vm_swrss, the copied fields are immediately overwritten.
Instead, initialize these fields to zero in vmspace_alloc(), eliminating a
bcopy() from vmspace_exec() and a bzero() from vmspace_fork().
kmem_alloc_pageable(). The difference between these is that an errant
memory access to the zone will be detected sooner with
kmem_alloc_nofault().
The following changes serve to eliminate the following lock-order
reversal reported by witness:
1st 0xc1a3c084 vm object (vm object) @ vm/swap_pager.c:1311
2nd 0xc07acb00 swap_pager swhash (swap_pager swhash) @ vm/swap_pager.c:1797
3rd 0xc1804bdc vm object (vm object) @ vm/uma_core.c:931
There is no potential deadlock in this case. However, witness is unable
to recognize this because vm objects used by UMA have the same type as
ordinary vm objects. To remedy this, we make the following changes:
- Add a mutex type argument to VM_OBJECT_LOCK_INIT().
- Use the mutex type argument to assign distinct types to special
vm objects such as the kernel object, kmem object, and UMA objects.
- Define a static swap zone object for use by UMA. (Only static
objects are assigned a special mutex type.)
being incomplete, it currently has to know how to drop and pick back
up the vm_object's mutex if it has to sleep and drop the page queue
mutex. The problem with this is that if the page is busy, while we
are sleeping, the page can be freed and object disappear. When trying
to lock m->object, we'd get a stale or NULL pointer and crash.
The object is now cached, but this makes the assumption that
the object is referenced in some manner and will not itself
disappear while it is unlocked. Since this only happens if
the object is locked, I had to remove an assumption earlier in
contigmalloc() that reversed the order of locking the object and
doing vm_page_sleep_if_busy(), not the normal order.
init and fini handlers. Our vm system removes all userland mappings at
exit prior to calling pmap_release. It just so happens that we might
as well reuse the pmap for the next process since the userland slate
has already been wiped clean.
However. There is a functional benefit to this as well. For platforms
that share userland and kernel context in the same pmap, it means that
the kernel portion of a pmap remains valid after the vmspace has been
freed (process exit) and while it is in uma's cache. This is significant
for i386 SMP systems with kernel context borrowing because it avoids
a LOT of IPIs from the pmap_lazyfix() cleanup in the usual case.
Tested on: amd64, i386, sparc64, alpha
Glanced at by: alc
allocated as "no object" pages. Similar changes were made to the amd64
and i386 pmap last year. The primary reason being that maintaining
a pte object leads to lock order violations. A secondary reason being
that the pte object is redundant, i.e., the page table itself can be
used to lookup page table pages. (Historical note: The pte object
predates our ability to allocate "no object" pages. Thus, the pte
object was a necessary evil.)
- Unconditionally check the vm object lock's status in vm_page_remove().
Previously, this assertion could not be made on Alpha due to its use
of a pte object.
improved chance of working despite pressure from running programs.
Instead of trying to throw a bunch of pages out to swap and hope for
the best, only a range that can potentially fulfill contigmalloc(9)'s
request will have its contents paged out (potentially, not forcibly)
at a time.
The new contigmalloc operation still operates in three passes, but it
could potentially be tuned to more or less. The first pass only looks
at pages in the cache and free pages, so they would be thrown out
without having to block. If this is not enough, the subsequent passes
page out any unwired memory. To combat memory pressure refragmenting
the section of memory being laundered, each page is removed from the
systems' free memory queue once it has been freed so that blocking
later doesn't cause the memory laundered so far to get reallocated.
The page-out operations are now blocking, as it would make little sense
to try to push out a page, then get its status immediately afterward
to remove it from the available free pages queue, if it's unlikely to
have been freed. Another change is that if KVA allocation fails, the
allocated memory segment will be freed and not leaked.
There is a sysctl/tunable, defaulting to on, which causes the old
contigmalloc() algorithm to be used. Nonetheless, I have been using
vm.old_contigmalloc=0 for over a month. It is safe to switch at
run-time to see the difference it makes.
A new interface has been used which does not require mapping the
allocated pages into KVA: vm_page.h functions vm_page_alloc_contig()
and vm_page_release_contig(). These are what vm.old_contigmalloc=0
uses internally, so the sysctl/tunable does not affect their operation.
When using the contigmalloc(9) and contigfree(9) interfaces, memory
is now tracked with malloc(9) stats. Several functions have been
exported from kern_malloc.c to allow other subsystems to use these
statistics, as well. This invalidates the BUGS section of the
contigmalloc(9) manpage.
pmap_protect() and pmap_remove(). In general, they require the lock in
order to modify a page's pv list or flags. In some cases, however,
pmap_protect() can avoid acquiring the lock.
and WITNESS is not built, then force all M_WAITOK allocations to
M_NOWAIT behavior (transparently). This is to be used temporarily
if wierd deadlocks are reported because we still have code paths
that perform M_WAITOK allocations with lock(s) held, which can
lead to deadlock. If WITNESS is compiled, then the sysctl is ignored
and we ask witness to tell us wether we have locks held, converting
to M_NOWAIT behavior only if it tells us that we do.
Note this removes the previous mbuf.h inclusion as well (only needed
by last revision), and cleans up unneeded [artificial] comparisons
to just the mbuf zones. The problem described above has nothing to
do with previous mbuf wait behavior; it is a general problem.
zones, and do it by direct comparison of uma_zone_t instead of strcmp.
The mbuf subsystem used to provide M_TRYWAIT/M_DONTWAIT semantics, but
this is mostly no longer the case. M_WAITOK has taken over the spot
M_TRYWAIT used to have, and for mbuf things, still may return NULL if
the code path is incorrectly holding a mutex going into mbuf allocation
functions.
The M_WAITOK/M_NOWAIT semantics are absolute; though it may deadlock
the system to try to malloc or uma_zalloc something with a mutex held
and M_WAITOK specified, it is absolutely required to not return NULL
and will result in instability and/or security breaches otherwise.
There is still room to add the WITNESS_WARN() to all cases so that
we are notified of the possibility of deadlocks, but it cannot change
the value of the "badness" variable and allow allocation to actually
fail except for the specialized cases which used to be M_TRYWAIT.
to failing -- that is, allocations via malloc(M_WAITOK) that are required
to never fail -- if WITNESS is not defined. While everyone should be
running WITNESS, in any case, zone "Mbuf" allocations are really the only
ones that should be screwed with by this hack.
This hack is crashing people, and would continue to do so with or without
WITNESS. Things shouldn't be allocating with M_WAITOK with locks held,
but it's not okay just to always remove M_WAITOK when !WITNESS.
Reported by: Bernd Walter <ticso@cicely5.cicely.de>
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
