Commit Graph

111 Commits

Author SHA1 Message Date
Warner Losh
528013d5a8 Retire the '@' symlink. It isn't really needed and causes more
problems than it solves. SYSDIR is already defined almost always and
can be used instead. Working around the one case where it isn't is
much easier than working around the fact that @ may not exist in 18
other places.

Differential Revision: https://reviews.freebsd.org/D1100
2014-11-06 16:48:37 +00:00
Warner Losh
df3394b3de Remove dependence on source tree options. Move all kernel module
options into kern.opts.mk and change all the places where we use
src.opts.mk to pull in the options. Conditionally define SYSDIR and
use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all
instances of CURDIR/../../etc with STSDIR, but only in the affected
files.

As a special compatibility hack, include bsd.owm.mk at the top of
kern.opts.mk to allow the bare build of sys/modules to work on older
systems. If the defaults ever change between 9.x, 10.x and current for
these options, however, you'll wind up with the host OS' defaults
rather than the -current defaults. This hack will be removed when
we no longer need to support this build scenario.

Reviewed by: jhb
Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
John Baldwin
d0345bb310 Re-enable -Werror for these modules. It is already enabled for the same
files when built as part of a kernel.
2014-06-09 20:48:38 +00:00
Hans Petter Selasky
a3837e481c Change the USB audio kernel module linking order, so that the USB
audio device driver is detached first and not its children. This fixes
a panic in some cases when unloading "snd_uaudio" while a USB device
is plugged. The linking order affects the order in which the module
dependencies are registered.

MFC after:	1 week
2014-05-14 07:33:06 +00:00
Hans Petter Selasky
827ac19dc2 Invert platform check.
Suggested by:	imp @
MFC after:	2 weeks
2014-05-09 14:35:07 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Hans Petter Selasky
957aad08a4 Build the kernel sound module without ISA DMA support for ARM and MIPS
platforms, because these platforms do not implement the ISA DMA
API. Else the sound modules cannot be loaded when running these
platforms.

MFC after:	2 weeks
2014-05-05 14:31:34 +00:00
Andreas Tobler
7447f978d3 The onyx codec works also as module, so add it.
MFC after:	1 month
2014-01-13 21:44:17 +00:00
Pedro F. Giffuni
646a7fea0c Clean some 'svn:executable' properties in the tree.
Submitted by:	Christoph Mallon
MFC after:	3 days
2013-01-26 22:08:21 +00:00
Alexander Motin
e4afd792df Add driver for the RME HDSPe AIO/RayDAT sound cards -- snd_hdspe(4).
Cards are expensive and so rare, so leave the driver as module.

Submitted by:	Ruslan Bukin <br@bsdpad.com>
MFC after:	2 weeks
2012-03-01 13:10:18 +00:00
Robert Millan
4a47892c81 Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable
kernel modules that include binary-only code.

More fine-grained control is provided via MK_SOURCELESS_HOST (for native code
that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode).

Reviewed by:	julian, delphij, freebsd-arch
Approved by:	kib (mentor)
MFC after:	2 weeks
2012-02-04 00:54:43 +00:00
Joel Dahl
ca5a2a70ab Remove leftovers from previous commits.
Approved by:	jhb
2012-02-02 17:25:39 +00:00
Pedro F. Giffuni
b7c60aadbb Cleanup some sound headers that don't need to be in the modules makefiles.
Approved by:	jhb (mentor)
MFC after:	1 week
2012-02-02 00:10:20 +00:00
Pedro F. Giffuni
5dcd37b17d Replace GPLd headers from the Maestro3 driver with BSD licensed
versions derived from /usr/ports/audio/oss.

The particular headers used were taken from the
attic/drv/oss_allegro directory and are mostly identical
to the previous files.

The Maestro3 driver is now free from the GPL.

NOTE: due to lack of testers this driver is being
considered for deprecation and removal.

PR:		kern/153920
Approved by:	jhb (mentor)
MFC after:	2 weeks
2012-01-20 22:37:10 +00:00
Alexander Motin
7c6b05d280 Major snd_hda driver rewrite:
- Huge old hdac driver was split into three independent pieces: HDA
controller driver (hdac), HDA CODEC driver (hdacc) and HDA sudio function
driver (hdaa).
 - Support for multichannel recording was added. Now, as specification
defines, driver checks input associations for pins with sequence numbers
14 and 15, and if found (usually) -- works as before, mixing signals
together. If it doesn't, it configures input association as multichannel.
 - Signal tracer was improved to look for cases where several DACs/ADCs in
CODEC can work with the same audio signal. If such case found, driver
registers additional playback/record stream (channel) for the pcm device.
 - New controller streams reservation mechanism was implemented. That
allows to have more pcm devices then streams supported by the controller
(usually 4 in each direction). Now it limits only number of simultaneously
transferred audio streams, that is rarely reachable and properly reported
if happens.
 - Codec pins and GPIO signals configuration was exported via set of
writable sysctls. Another sysctl dev.hdaa.X.reconfig allows to trigger
driver reconfiguration in run-time.
 - Driver now decodes pins location and connector type names. In some cases
it allows to hint user where on the system case connectors, related to the
pcm device, are located. Number of channels supported by pcm device,
reported now (if it is not 2), should also make search easier.
 - Added workaround for digital mic on some Asus laptops/netbooks.

MFC after:	2 months
Sponsored by:	iXsystems, Inc.
2012-01-15 13:21:36 +00:00
Pedro F. Giffuni
70e0bbedef Replace GPL'd headers in the emu10kx snd driver code.
This uses the emuxkireg.h already used in the emu10k1
snd driver. Special thanks go to Alexander Motin as
he was able to find some errors and reverse engineer
some wrong values in the emuxkireg header.

The emu10kx driver is now free from the GPL.

PR:		153901
Tested by:	mav, joel
Approved by:	jhb (mentor)
MFC after:	2 weeks
2012-01-11 21:17:14 +00:00
Pedro F. Giffuni
c7e0c9db2b Replace a GPL'd header in the emu10k1 snd driver code.
This brings in the emuxkireg.h from NetBSD (dev/pci) which
is used for the same purpose but is smaller. The emu10k1
is now free from the GPL.

PR:		153901
Obtained from:	NetBSD
Approved by:	core (mentor implicit)
MFC after:	2 weeks
2012-01-03 21:04:54 +00:00
Warner Losh
146fce53d8 MFtbemd: use MACHINE_CPUARCH 2010-09-13 02:05:42 +00:00
Warner Losh
c09808d0d6 MFtbemd:
Use MACHINE_CPUARCH in preference to MACHINE_ARCH.  The former is the
source code location of the machine, the latter the binary output.  In
general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless
we're tesitng for a specific target.  The isn't even moot for
i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86,
although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
Nathan Whitehorn
a393ae13a4 Make kernel modules build correctly on 64-bit PowerPC. 2010-07-13 12:47:31 +00:00
Ariff Abdullah
f6f8d7b601 Last (hopefully) attempt to fix both parallel build and
cyclic dependencies, in a simmilar fashion to kmod.mk.

Discussed with:		bde, bz
2009-06-12 07:39:10 +00:00
Ariff Abdullah
abfbe0c17a Attempt to fix parallel build. 2009-06-10 11:33:47 +00:00
Ariff Abdullah
0f40c3f162 Move all sound related scripts to its own 'sound' subdir.
Suggested by:	jmallett
2009-06-10 06:49:45 +00:00
Ariff Abdullah
5b9505f5d1 Each generated file should depend its own generator as well. 2009-06-09 10:17:22 +00:00
Bjoern A. Zeeb
93a885572c Depend on @ machine (_ILINKS) as we do with other modules so that @
is there for parallel (-jN) builds.  Ideally beforedepends in kmod.mk
should do the right thing but it seems it does not.
2009-06-09 09:03:13 +00:00
Ariff Abdullah
90da2b2859 Sound Mega-commit. Expect further cleanup until code freeze.
For a slightly thorough explaination, please refer to
	[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includes:

1 Volume Per-Channel (vpc).  Provides private / standalone volume control
  unique per-stream pcm channel without touching master volume / pcm.
  Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
  backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
  instead of /dev/mixer.  Special "bypass" mode is enabled through
  /dev/mixer which will automatically detect if the adjustment is made
  through /dev/mixer and forward its request to this private volume
  controller.  Changes to this volume object will not interfere with
  other channels.

  Requirements:
    - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
      require specific application modifications (preferred).
    - No modifications required for using bypass mode, so applications
      like mplayer or xmms should work out of the box.

  Kernel hints:
    - hint.pcm.%d.vpc (0 = disable vpc).

  Kernel sysctls:
    - hw.snd.vpc_mixer_bypass (default: 1).  Enable or disable /dev/mixer
      bypass mode.
    - hw.snd.vpc_autoreset (default: 1).  By default, closing/opening
      /dev/dsp will reset the volume back to 0 db gain/attenuation.
      Setting this to 0 will preserve its settings across device
      closing/opening.
    - hw.snd.vpc_reset (default: 0).  Panic/reset button to reset all
      volume settings back to 0 db.
    - hw.snd.vpc_0db (default: 45).  0 db relative to linear mixer value.

2 High quality fixed-point Bandlimited SINC sampling rate converter,
  based on Julius O'Smith's Digital Audio Resampling -
  http://ccrma.stanford.edu/~jos/resample/.  It includes a filter design
  script written in awk (the clumsiest joke I've ever written)
    - 100% 32bit fixed-point, 64bit accumulator.
    - Possibly among the fastest (if not fastest) of its kind.
    - Resampling quality is tunable, either runtime or during kernel
      compilation (FEEDER_RATE_PRESETS).
    - Quality can be further customized during kernel compilation by
      defining FEEDER_RATE_PRESETS in /etc/make.conf.

  Kernel sysctls:
    - hw.snd.feeder_rate_quality.
      0 - Zero-order Hold (ZOH).  Fastest, bad quality.
      1 - Linear Interpolation (LINEAR).  Slightly slower than ZOH,
          better quality but still does not eliminate aliasing.
      2 - (and above) - Sinc Interpolation(SINC).  Best quality.  SINC
          quality always start from 2 and above.

  Rough quality comparisons:
    - http://people.freebsd.org/~ariff/z_comparison/

3 Bit-perfect mode.  Bypasses all feeder/dsp effects.  Pure sound will be
  directly fed into the hardware.

4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
  be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.

5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
  vchans in order to make digital format pass through.  It also makes
  vchans more dynamic by choosing a better format/rate among all the
  concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
  becomes sort of optional.

6 Exclusive Stream, with special open() mode O_EXCL.  This will "mute"
  other concurrent vchan streams and only allow a single channel with
  O_EXCL set to keep producing sound.

Other Changes:
    * most feeder_* stuffs are compilable in userland. Let's not
      speculate whether we should go all out for it (save that for
      FreeBSD 16.0-RELEASE).
    * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
    * pull out channel mixing logic out of vchan.c and create its own
      feeder_mixer for world justice.
    * various refactoring here and there, for good or bad.
    * activation of few more OSSv4 ioctls() (see [1] above).
    * opt_snd.h for possible compile time configuration:
      (mostly for debugging purposes, don't try these at home)
        SND_DEBUG
        SND_DIAGNOSTIC
        SND_FEEDER_MULTIFORMAT
        SND_FEEDER_FULL_MULTIFORMAT
        SND_FEEDER_RATE_HP
        SND_PCM_64
        SND_OLDSTEREO

Manual page updates are on the way.

Tested by:	joel, Olivier SMEDTS <olivier at gid0 d org>, too many
          	unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
Nathan Whitehorn
c299fae2cc PowerPC does not, in general, have ISA sound devices or an ISA bus,
so add PowerPC to list of platforms for which we don't want to depend
on ISA.
2009-05-10 16:00:41 +00:00
Andrew Thompson
3a3f90c6c3 Move the uaudio and ata-usb drivers into their correct locations. 2009-02-23 21:19:18 +00:00
Andrew Thompson
7d0d268b8a Hook up new USB modules. 2009-02-23 18:32:59 +00:00
Nathan Whitehorn
8486eb86a7 Add support for the I2S and davbus audio controllers found in Apple PowerPC
hardware.

Submitted by:	Marco Trillo
2009-01-25 18:20:15 +00:00
Rong-En Fan
fb898a2cc2 - Remove snd_au88x0 which seems never got compiled into kernel nor as a kernel
module. These files cause manual interaction when building
  ports/audio/aureal-kmod which provides a usable i386-only driver (it requires
  linking against some linux object files distributed by vendor which bankrupted
  back in 2000).

MFC after:	1 week
2009-01-07 03:15:22 +00:00
Marius Strobl
10eee905ca Restore SUBDIR+= accidentally removed in the previous revision.
Pointed out by:	ariff
2008-05-04 16:02:45 +00:00
Marius Strobl
07f35f4b9a Don't build unused SBus front-ends for sun4v, don't build EBus front-ends
which are also likely to be irrelevant for sun4v (there's no SBus on sun4v
and only some EBus devices). While at it fix some style bugs according to
style.Makefile(5) where appropriate.

MFC after:	3 days
2008-05-04 14:59:25 +00:00
Antoine Brodin
10f0bcab61 Remove option headers that do not exist and are not used
from the Makefiles in sys/modules.
(opt_devfs.h, opt_bdg.h, opt_emu10kx.h and opt_uslcom.h)

Approved by:	rwatson (mentor)
2008-03-27 20:38:03 +00:00
Ruslan Ermilov
995dc98447 Remove WARNS from here and compile with default kernel flags. 2008-02-21 11:09:59 +00:00
Ariff Abdullah
b28624fde6 Update snd_emu10kx driver with recent perforce changes (and few
other changes too).

(without any real order)

1. Use device_get_nameunit for mutex naming
2. Add timer for low-latency playback
3. Move most mixer controls from sysctls to mixer(8) controls.
   This is a largest part of this patch.
4. Add analog/digital switch (as a temporary sysctl)
5. Get back support for low-bitrate playback (with help of (2))
6. Change locking for exclusive I/O. Writing to non-PTR register
   is almost safe and does not need to be ordered with PTR operations.
7. Disable MIDI until we get it to detach properly and fix memory
   managment problems.
8. Enable multichannel playback by default. It is as stable as
   single-channel mode. Multichannel recording is still an
   experimental feature.
9. Multichannel options can be changed by loader tunables.
10. Add a way to disable card from a loader tunable.
11. Add new PCI IDs.
12. Debugger settings are loader tunables now.
14. Remove some unused variables.
15. Mark pcm sub-devices MPSAFE.
16. Partially revert (bus_setup_intr -> snd_setup_intr) since it need
    to be done independently

Submitted by:	Yuriy Tsibizov (driver maintainer)
Approved by:	re (bmah)
2007-09-12 07:43:43 +00:00
Ariff Abdullah
bba4862c64 Last major commit and updates for RELENG_7:
- Rework the entire pcm_channel structure:
  * Remove rarely used link placeholder, instead, make each pcm_channel
    as head/link of each own/each other. Unlock - Lock sequence due to
    sleep malloc has been reduced.
  * Implement "busy" queue which will contain list of busy/active
    channels. This greatly reduce locking contention for example while
    servicing interrupt for hardware with many channels or when virtual
    channels reach its 256 peak channels.

- So I heard you like v chan ... O RLY?
  Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for
  recording, Rec-Chan, you decide), the ultimate solutions for your
  nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing
  single record channel causing EBUSY.  Vrec works exactly like Vchans
  (or, should I rename it to "Vplay" :) , except that it operates on the
  opposite direction (recording). Up to 256 vrecs (like vchans) are
  possible.

  Notes:
   * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its
     respective node/direction:
       dev.pcm.%d.play.* for "play"   (cdev = dsp%d.vp%d)
       dev.pcm.%d.rec.*  for "record" (cdev = dsp%d.vr%d)
   * Don't expect that it will magically give you ability to split
     "recording source" (eg: 1 channel for cdrom, 1 channel for mic,
     etc). Just admit that you only have a *single* recording source /
     channel. Please bug your hardware vendor instead :)

- Bump maxautovchans from 4 to 16. For a full-fledged multimedia
  desktop/workstation with too many soundservers installed (esound,
  artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh,
  etc), 4 seems inadequate. There will be no memory penalty here, since
  virtual channels are allocate only by demand.

- Nuke/Rework the entire statically created cdev entries. Everything is
  clonable through snd own clone manager which designed to withstand many
  kind of abusive devfs droids such as:
      * while : ; do /bin/test -e /dev/dsp ; done
      * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done
      * hundreds (could be thousands) concurrent threads/process opening
	"/dev/dsp" (previously, this might result EBUSY even with just
	3 contesting threads/procs).
  o Reusable clone objects (instead of creating new one like there's no
    tomorrow) after certain expiration deadline. The clone allocator will
    decide whether to reuse, share, or creating new clone.
  o Automatic garbage collector.

- Dynamic unit magic allocator. Maximum attached soundcards can be tuned
  using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and
  maximum is 2048.

- ..other fixes, mostly related to concurrency issues.

joel@ will do the manpage updates on sound(4).

Have fun.
2007-05-31 18:43:33 +00:00
Alexander Leidinger
a346b0961c Disable multichannel recording in snd_emu10kx module. Whith multichannel
recording enabled some programs (audio/audacity from ports) can't
correctly enumerate all /dev/dsp device.

Note: previous commit did not enable some debugging stuff, my eyes did
misread "#undef" as "#define".

Submitted by:	Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
2007-01-07 19:43:59 +00:00
Alexander Leidinger
f856af0466 Extend the emu10kx driver. With the words of the author:
---snip---
New features:
1.	Optional multichannel recording (32 channels on Live!, 64 channels
 	on Audigy).

 	All channels are 16bit/48000Hz/mono, format is fixed.
 	Half of them are copied from sound output, another half can be
 	used to record any data from DSP. What should be recorded is
 	hardcoded in DSP code. In this version it records dummy data, but
 	can be used to record all DSP inputs, for example..

 	Because there are no support of more-than-stereo sound streams
 	multichannell stream is presented as one 32(64)*48000 Hz 16bit mono
 	stream.

 	Channel map:

 	SB Live! (4.0/5.1)
 	offset (words)	substream
 	0x00		Front L
 	0x01		Front R
 	0x02		Digital Front L
 	0x03		Digital Front R
 	0x04		Digital Center
 	0x05		Digital Sub
 	0x06		Headphones L
 	0x07		Headphones R
 	0x08		Rear L
 	0x09		Rear R
 	0x0A		ADC (multi-rate recording) L
 	0x0B		ADC (multi-rate recording) R
 	0x0C		unused
 	0x0D		unused
 	0x0E		unused
 	0x0F		unused
 	0x10		Analog Center (Live! 5.1) / dummy (Live! 4.0)
 	0x11		Analog Sub (Live! 5.1) / dummy (Live! 4.0)
 	0x12..-0x1F	dummy

 	Audigy / Audigy 2 / Audigy 2 Value / Audigy 4
 	offset (words)	substream
 	0x00		Digital Front L
 	0x01		Digital Front R
 	0x02		Digital Center
 	0x03		Digital Sub
 	0x04		Digital Side L (7.1 cards) / Headphones L (5.1 cards)
 	0x05		Digital Side R (7.1 cards) / Headphones R (5.1 cards)
 	0x06		Digital Rear L
 	0x07		Digital Rear R
 	0x08		Front L
 	0x09		Front R
 	0x0A		Center
 	0x0B		Sub
 	0x0C		Side L
 	0x0D		Side R
 	0x0E		Rear L
 	0x0F		Rear R
 	0x10		output to AC97 input L (muted)
 	0x11		output to AC97 input R (muted)
 	0x12		unused
 	0x13		unused
 	0x14		unused
 	0x15		unused
 	0x16		ADC (multi-rate recording) L
 	0x17		ADC (multi-rate recording) R
 	0x18		unused
 	0x19		unused
 	0x1A		unused
 	0x1B		unused
 	0x1C		unused
 	0x1D		unused
 	0x1E		unused
 	0x1F		unused
 	0x20..0x3F	dummy

Fixes:
1.	Do not assign negative values to variables used to index emu_cards
 	array. This array was never accessed when index is negative, but
 	Alexander (netchild@) told me that Coverity does not like it.
 	After this change emu_cards[0] should never be used to identify
 	valid sound card.
2.	Fix off-by-one errors in interrupt manager. Add more checks there.
3.	Fixes to sound buffering code now allows driver to use large playback
 	buffers.
4.	Fix memory allocation bug when multichannel recording is not
 	enabled.
5.	Fix interrupt timeout when recording with low bitrate (8kHz).

Hardware:
1.	Add one more known Audigy ZS card to list. Add two cards with
 	PCI IDs betwen old known cards and new one.

Other changes:
1.	Do not use ALL CAPS in messages.

Incomplete code:
1.	Automute S/PDIF when S/PDIF signal is lost.

Tested on i386 only, gcc 3.4.6 & gcc41/gcc42 (syntax only).
---snip---

This commits enables a little bit of debugging output when the driver is
loaded as a module. I did a cross-build test for amd64.

The code has some style issues, this will be addressed later.

The multichannel recording part is some work in progress to allow playing
around with it until the generic sound code is better able to handle
multichannel streams.

This is supposed to fix
CID:		171187
Found by:	Coverity Prevent

Submitted by:	Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
2007-01-06 18:59:35 +00:00
Ariff Abdullah
2c72e284ca Connect snd_hda(4) to build process...
Add support for Intel High Definition Audio Controller.

This driver make a special guarantee that "playback" works
on majority hardwares with minimal or without specific vendor
quirk.

This driver is a product of collaborative effort made by:

  Stephane E. Potvin <sepotvin@videotron.ca>
       Andrea Bittau <a.bittau@cs.ucl.ac.uk>
       Wesley Morgan <morganw@chemikals.org>
      Daniel Eischen <deischen@FreeBSD.org>
     Maxime Guillaud <bsd-ports@mguillaud.net>
      Ariff Abdullah <ariff@FreeBSD.org>

....and various people from freebsd-multimedia@FreeBSD.org

Refer to snd_hda(4) for features and issues.

Welcome To HDA.

Sponsored by:	Defenxis Sdn. Bhd.
2006-10-01 11:18:56 +00:00
Ariff Abdullah
1f0387f732 Add support for Intel High Definition Audio Controller.
This driver make a special guarantee that "playback" works
on majority hardwares with minimal or without specific vendor
quirk.

This driver is a product of collaborative effort made by:

  Stephane E. Potvin <sepotvin@videotron.ca>
       Andrea Bittau <a.bittau@cs.ucl.ac.uk>
       Wesley Morgan <morganw@chemikals.org>
      Daniel Eischen <deischen@FreeBSD.org>
     Maxime Guillaud <bsd-ports@mguillaud.net>
      Ariff Abdullah <ariff@FreeBSD.org>

....and various people from freebsd-multimedia@FreeBSD.org

Refer to snd_hda(4) for features and issues.

Welcome To HDA.

Sponsored by:	Defenxis Sdn. Bhd.
2006-10-01 11:13:00 +00:00
Alexander Leidinger
5cc415a9eb Respect style.Makefile(5).
Cluebat waving by:	ru
2006-09-30 18:12:33 +00:00
Alexander Leidinger
3d00f0efff Add the envy24ht driver to the build. 2006-09-30 17:53:25 +00:00
Alexander Leidinger
e1ce6f3dab Remove the ak452x module. 2006-09-30 17:13:26 +00:00
Alexander Leidinger
b108934510 Disconnect ak452x from the build, it is not needed anymore. 2006-09-30 17:12:25 +00:00
Alexander Leidinger
12502e6b9f We don't need the ISA interface.
Submitted by:	"Konstantin Dimitrov" <kosio.dimitrov@gmail.com>
2006-09-30 17:10:37 +00:00
Alexander Leidinger
08f5a34ed1 Add the spicds module to the build.
Submitted by:	"Konstantin Dimitrov" <kosio.dimitrov@gmail.com>
2006-09-30 16:57:41 +00:00
Ruslan Ermilov
1e9defe45a If building the module as part of the kernel build, determine
the "device isa" presence out of the opt_isa.h in the kernel
build directory, rather than always assuming its presence.
sparc64 is still special cased and is not affected by this
change.

Noticed by:	bde
2006-09-04 07:40:53 +00:00
Dag-Erling Smørgrav
8b3ae668b1 Don't use touch when what is really meant is :> (create an empty file, or
truncate it if it exists) or :>> (ensure the file exists, but don't change
it if it already does)

Reviewed by:	ru
MFC after:	2 weeks
2006-08-14 13:28:53 +00:00