Due to incorrect merge the piece of code was put in incorrect
place and diverge from libefx in other locations.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18024
This patch utilizes the fixed_devclass attribute in order to make sure
other acpi devices with params don't get confused for an EC device.
The existing code assumes that acpi_ec_probe is only ever called with a
dereferencable acpi param. Aside from being incorrect because other
devices of ACPI_TYPE_DEVICE may be probed here which aren't ec devices,
(and they may have set acpi private data), it is even more nefarious if
another ACPI driver uses private data which is not dereferancable. This
will result in a pointer deref during boot and therefore boot failure.
On X86, as it stands today, no other devices actually do this (acpi_cpu
checks for PROCESSOR type devices) and so there is no issue. I ran into
this because I am adding such a device which gets probed before
acpi_ec_probe and sets private data. If ARM ever has an EC, I think
they'd run into this issue as well.
There have been several iterations of this patch. Earlier
iterations had ECDT enumerated ECs not call into the probe/attach
functions of this driver. This change was Suggested by: jhb@.
Reviewed by: jhb
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D16635
Now that the ACPI and FDT implementations for activating and
deactivating resources are the same, we can move it to
pci_host_generic.c. No functional changes.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17793
Now that we are handling PCI resources in pci_host_generic_acpi.c, we
don't need these change (made by r336129)
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17792
This is a major update for pci_host_generic_acpi.c, the current
implementation has some gaps that are better fixed up in one go.
The changes are to:
* Follow x86 method of not adding PCI resources to PCI host bridge in
ACPI code. This has been moved to pci_host_generic_acpi.c, where we
walk thru its resources of the host bridge and add them.
* Fixup code in pci_host_generic_acpi.c to read all decoded ranges
and update the 'ranges' property. This allows us to share most of
the code with generic implementation (and the FDT one).
* Parse and setup IO ranges and bus ranges when walking the resources
above. Drop most of the changes related to this from acpica code.
* Add the ECAM memory area as mem resource 0. Implement the logic to
get the ECAM area from MCFG (using bus range which we now decode),
or from _CBA (using _BBN/bus range). Drop aarch64 ifdefs from acpica
code which did part of this.
* Switch resource activation to similar code as FDT implementation,
this can be moved into generic implementation in a later pass.
* Drop the mechanism of using the 7th bit of bus number as the domain,
this is not correct and will work only in very specific cases. Use
_SEG as PCI domain and use the bus ranges of the host bridge to
provide start bus number.
This commit should not make any functional change to dev/acpica/acpi.c
for other architectures, almost all the changes there are to revert
earlier additions in this file done for aarch64.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17791
On arm64 (where INTRNG is enabled), the interrupts have to be mapped
with ACPI_BUS_MAP_INTR() before adding them as resources to devices.
The earlier code did the mapping before calling acpi_set_resource(),
which bypassed code that checked for PCI link interrupts.
To fix this, move the call to map interrupts into acpi_set_resource()
and that requires additional work to lookup interrupt properties.
The changes here are to:
* extend acpi_lookup_irq_handler() to lookup an irq in the ACPI
resources
* create a helper function acpi_map_intr() which uses the updated
acpi_lookup_irq_handler() to look up an irq, and then map it
with ACPI_BUS_MAP_INTR()
* use acpi_map_intr() in acpi_pcib_route_interrupt() to map
pci link interrupts.
With these changes, we can drop the ifdefs in acpi_resource.c, and
we can also drop the call for mapping interrupts in generic_timer.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17790
Both ACPI and FDT support bus ranges for pci host bridges. Update
pci_host_generic*.[ch] with a default implementation to support this.
This will be used in the next set of changes for ACPI based host
bridge. No functional changes in this commit.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17657
Fix up pci_host_generic.c and pci_host_generic_fdt.c to allocate
resources against devices that requested them. Currently the
allocation happens against the pcib, which is incorrect.
This is needed for the upcoming changes for fixing up
pci_host_generic_acpi.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17656
The current quirk implementation writes a fixed address to the PCI BAR
to fix a firmware bug. The PCI BARs are allocated by firmware and will
change depending on PCI devices present. So using a fixed address here
is not correct.
This quirk worked around a firmware bug that programmed the MSI-X bar
of the SATA controller incorrectly. The newer firmware does not have
this issue, so it is better to drop this quirk altogether.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17655
transfer mode only (lost with r321385). [1]
- Similarly, don't try to set the power class on MMC devices that comply
to version 4.0 of the system specification but are operated in default/
legacy transfer or 1-bit bus mode as no power class is specified for
these cases. Trying to set a power class nevertheless resulted in an -
albeit harmless - error message.
PR: 231713 [1]
vmem's are not just used for TLS memory in TOM and the #include actually
predates the TLS code so should not have been removed when the TLS vmem
moved in r340466.
Pointy hat to: jhb
Sponsored by: Chelsio Communications
The key context is always placed immediately after the work request
header. The total work request length has to be rounded up by 16
however.
MFC after: 1 month
Sponsored by: Chelsio Communications
The addresses passed when reading and writing keys are always shifted
right by 5 as the memory locations are addressed in 32-byte chunks, so
the quantum needs to be 32, not 8.
MFC after: 1 month
Sponsored by: Chelsio Communications
For TOE TLS, we just want to advance the send pointer to skip over the
record just sent to the TOE. The recently added sbsndptr_adv() is
sufficient for that and is cheaper.
MFC after: 1 month
Sponsored by: Chelsio Communications
netmap(4) support for vtnet(4) was incomplete and had multiple bugs.
This commit fixes those bugs to bring netmap on vtnet in a functional state.
Changelist:
- handle errors returned by virtqueue_enqueue() properly (they were
previously ignored)
- make sure netmap XOR rest of the kernel access each virtqueue.
- compute the number of netmap slots for TX and RX separately, according to
whether indirect descriptors are used or not for a given virtqueue.
- make sure sglist are freed according to their type (mbufs or netmap
buffers)
- add support for mulitiqueue and netmap host (aka sw) rings.
- intercept VQ interrupts directly instead of intercepting them in txq_eof
and rxq_eof. This simplifies the code and makes it easier to make sure
taskqueues are not running for a VQ while it is in netmap mode.
- implement vntet_netmap_config() to cope with changes in the number of queues.
Reviewed by: bryanv
Approved by: gnn (mentor)
MFC after: 3 days
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D17916
Update the AMD family 17h temperature reporting based on AMD Tech Doc 56255
OSRR, section 4.2.1.
For CPUS w/CUR_TEMP_RANGE_SEL set, scale the reported temperature into the
range -49..206; i.e., subtract 49°C.
Submitted by: gallatin@
Reported by: bcran@
Reviewed by: me (long ago)
MFC after: 22.57 seconds
Relnotes: yea
Differential Revision: https://reviews.freebsd.org/D16855
As reported, tested, and patch supplied by Johannes.
There may be future work to do to support multiple sensors, but for now, any
sensor at all is a strict improvement for Ryzen 2 systems.
PR: 228480
Submitted by: Johannes Lundberg <johalun0 AT gmail.com> (earlier version)
Reported by: deischen@, Johannes, and numerous others
MFC after: 3.72 days
This was for pre-7.0 CAM support. Neither the CAM nor the busdma
changes over the years have not been ifdef'd. The code cannot build
on 6.x anymore. Support for 6.4 ended in 2010, so remove them.
A kernel panic can occur if the cxgbe interface is DOWN
when activating netmap. This patch prevents the driver
from freeing up cxgbe netmap resources when they have not
been allocated.
Submitted by: Nicolas Witkowski <nwitkowski@verisign.com>
Reviewed by: np
MFC after: 1 week
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D17802
The first packet after the ring is initialized was never
completed as isc_txd_credits_update() would not include it in the
count of completed packets. This caused netmap to never complete
a batch. See PR 233022 for more details.
PR: 233022
Reported by: lev
Reviewed by: lev
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17931
r254889 added tcp_state_change() as a centralized place to log state
changes in TCP connections for DTrace. r294869 and r296881 took
advantage of this central location to manage per-state counters.
However, TOE sockets were still performing some (but not all) state
change updates via direct assignments to t_state. This resulted in
state counters underflowing when TOE was in use. Fix by using
tcp_state_change() when changing a TOE connection's state.
Reviewed by: np, markj
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17915
From Jake:
The iflib stack does not disable TSO automatically when TXCSUM is
disabled, instead assuming that the driver will correctly handle TSOs
even when CSUM_IP is not set.
This results in iflib calling ixl_isc_txd_encap with packets which have
CSUM_IP_TSO, but do not have CSUM_IP or CSUM_IP_TCP set. Because of
this, ixl_tx_setup_offload will not setup the IPv4 checksum offloading.
This results in bad TSO packets being sent if a user disables TXCSUM
without disabling TSO.
Fix this by updating the ixl_tx_setup_offload function to check both
CSUM_IP and CSUM_IP_TSO when deciding whether to enable IPv4 checksums.
Once this is corrected, another issue for TSO packets is revealed. The
driver sets IFLIB_NEED_ZERO_CSUM in order to enable a work around that
causes the ip->sum field to be zero'd. This is necessary for ixl
hardware to correctly perform TSOs.
However, if TXCSUM is disabled, then the work around is not enabled, as
CSUM_IP will not be set when the iflib stack checks to see if it should
clear the sum field.
Fix this by adding IFLIB_TSO_INIT_IP to the iflib flags for the iavf and
ixl interface files.
It is uncertain if the hardware needs IFLIB_NEED_ZERO_CSUM for any other
case besides TSO, so leave that flag assigned. It may be worth
investigating to see if this work around flag could be disabled in
a future change.
Once both of these changes are made, the ixl driver should correctly
offload TSO packets when TSO4 offload is enabled, regardless of whether
TXCSUM is enabled or disabled.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, shurd@
MFC after: 0 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D17900
transaction translator will return a NAK. Ignore this message and
retry the complete split instead.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Previously attempts to read the MC region were failing since the
length was greater than 2^31.
Reviewed by: np
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17857
- Use PH_loc.eight[1] as a general 'cflags' (Chelsio flags) field to
describe properties of a queued packet. The MC_RAW_WR flag
indicates an mbuf holding a raw work request. mbuf_cflags() returns
the current flags.
- Raw work request mbufs are allocated via alloc_wr_mbuf() which will
allocate a single contiguous range to hold the mbuf data. The
consumer can use mtod() to obtain the start of the work request and
write the required work request in the buffer. The mbuf can then be
enqueued directly to the txq via mp_ring_enqueue().
- Since raw work requests might potentially send arbitrary work
requests, only set the EQUIQ and EQUEQ bits on work requests that
support them such as the normal tunneled Ethernet packet work
requests.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17811
The hwpmc pcpu sample buffer is prone to head of line blocking
when waiting for user process to return to user space and
collect a pending callchain. If more than one tick has elapsed
between the time the sample entry was marked for collection and
the time that the hardclock pmc handler runs to copy the records
to a larger temporary buffer, mark the sample entry as not in
use.
This changes reduces the number of samples marked as not valid
when collecting under load from ~99.5% to 5-20%.
Reported by: mjg@
MFC after: 3 days
As part of Chuck's work on fixing kernel crashes caused by disk I/O
errors, it is useful to be able to trigger various kinds of
errors. This patch allows causing an AHCI-attached disk to disappear,
by having the driver keep the PHY disabled when the driver would
otherwise enable the PHY. It also allows making the disk reappear by
having the driver go back to setting the PHY enable/disable state as
it normal would and simulating the hardware event that causes a bus
rescan.
Submitted by: Chuck Silvers
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D16043
These arguments are mostly paths handled by NAMEI*() macros which already
take const char * arguments.
This change improves the match between syscalls.master and the public
declerations of system calls.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17812
Currently this is a no-op, but will matter in the future when
cannot_use_txpkts() starts checking other conditions than just
needs_tso().
Sponsored by: Chelsio Communications
- Add a bus_child_location_str method to the nexus drivers that prints
out 'port=N' as the location string exported via devinfo and the
'%location' sysctl node.
- We can't use a bus_hint_device_unit to wire the unit numbers of
devices with a fixed devclass as the device gets assigned a unit in
make_device() before the device creator can set softc, etc.
Instead, when adding a child device, use a helper function much like
a bus_hint_device_unit method to look for wiring hints or to return
-1 to let the system choose a unit number. This function requires
an "at" hint for the port pointing to the nexus device and a "port"
hint listing the port number. For example:
hint.cxl.4.at="t5nex0"
hint.cxl.4.port="0"
wires cxl4 to the first port on the t5nex0 adapter.
Requested by: gallatin
MFC after: 2 months
