Commit Graph

339 Commits

Author SHA1 Message Date
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Pyun YongHyeon
90b45a3200 Remove unnecessary comparison.
Found by:	PVS-Studio
2017-04-14 02:33:26 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Gleb Smirnoff
8ec07310fa These files were getting sys/malloc.h and vm/uma.h with header pollution
via sys/mbuf.h
2016-02-01 17:41:21 +00:00
Warner Losh
aa6b24dc9a Add Intel vendor ID to the device table to make it more uniform so
that all the pnp info to match the device is in the fxp_ident_table.
2014-12-24 03:49:33 +00:00
Gleb Smirnoff
bd071d4d19 - Remove empty wrappers ether_poll_[de]register_drv(). [1]
- Move polling(9) declarations out of ifq.h back to if_var.h
  they are absolutely unrelated to queues.

Submitted by:	Mikhail <mp lenta.ru> [1]
2014-09-28 14:05:18 +00:00
Gleb Smirnoff
df3601781d - Use if_inc_counter() to increment various counters.
- Do not ever set a counter to a value. For those counters
  that we don't increment, but return directly from hardware
  create cases in if_get_counter() method.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-09-18 15:56:14 +00:00
Gleb Smirnoff
09a8241fc9 It is actually possible to have if_t a typedef to non-void type,
and keep both converted to drvapi and non-converted drivers
compilable.

o Make if_t typedef to struct ifnet *.
o Remove shim functions.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-08-31 12:48:13 +00:00
Marcel Moolenaar
41eb5ac39d Convert fxp(4) to use the driver API.
Submitted by:	Anuranjan Shukla <anshukla@juniper.net>
Obtained from:	Juniper Networks, Inc.
2014-06-02 18:45:36 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Pyun YongHyeon
5506afef17 Avoid unnecessary controller reinitialization by checking driver
running state.  fxp(4) requires controller reinitialization for the
following cases.
 o RX lockup condition on i82557
 o promiscuous mode change
 o multicast filter change
 o WOL configuration
 o TSO/VLAN hardware tagging/checksum offloading configuration
 o MAC reprogramming after speed/duplex/flow-control resolution
 o Any events that result in MAC reprogramming(link UP/DOWN,
   remote link partner's restart of auto-negotiation etc)
 o Microcode loading/unloading
Apart from above cases which come from hardware limitation, upper
stack also blindly reinitializes controller whenever an IP address
is assigned. After r194573, fxp(4) no longer needs to reinitialize
the controller to program multicast filter after upping the
interface. So keeping track of driver running state should remove
all unnecessary controller reinitializations.

This change will also address endless controller reinitialization
triggered by dhclient(8).

Tested by:	hrs, Alban Hertroys <haramrae@gmail.com>
2013-06-10 07:31:49 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Dimitry Andric
29658c96ce Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
Marius Strobl
e4029d4cac - Change the module order of these MAC drivers to be last so they are
deterministically handled after the corresponding PHY drivers when
  loaded as modules. Otherwise, when these MAC/PHY driver pairs are
  compiled into a single module probing the PHY driver may fail. This
  makes r151438 and r226154 actually work. [1]
  Reported and tested by: yongari (fxp(4))
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

Submitted by:	jhb [1]
MFC after:	3 days
2012-05-11 02:40:40 +00:00
Pyun YongHyeon
c3f52a31a5 Remove unnecessary #if as the software workaround for PCI protocol
violation should be activated unless the system is cold-booted
after updating EEPROM.
The PCI protocol violation happens only when established link is
10Mbps so the workaround should be updated whenever link state
change is detected.  Previously the workaround was activated only
when user checks current media status with ifconfig(8).
2012-03-28 01:52:38 +00:00
Pyun YongHyeon
8262183e5b Load entire EEPROM contents in device attach time and verify
whether the checksum of EEPROM is valid or not.  Because driver
heavily relies on EEPROM information when it selectively enables
features/workarounds, it would be helpful to know whether driver
sees valid EEPROM.
While I'm here remove all other EEPROM accesses since the entire
EEPROM is loaded at device attach time.

MFC after:	2 weeks
2012-03-28 01:27:27 +00:00
Pyun YongHyeon
1343a72fe2 Partially revert r223608 and selectively allow microcode loading
for 82550C.  For 82550 controllers this change restores CPUSaver
microcode loading.  Due to silicon bug on 82550 and 82550C with
server extension, these controllers seem to require CPUSaver
microcode to receive fragmented UDP datagrams.  However the
microcode shouldn't be used on client featured 82550C as it locks
up the controller.  In addition, client featured 82550C does not
have the silicon bug.  Also clear temporary memory used for
microcode loading since the same memory area is used for other
commands.
While I'm here use 82550C in probe message instead of generic
82550.

Reported by:	Andreas Longwitz <longwitz <> incore de>
Tested by:	Andreas Longwitz <longwitz <> incore de>
MFC after:	2 weeks
2012-03-28 01:08:55 +00:00
Pyun YongHyeon
a461b20142 Do not change current media when driver is already running. If
driver is running driver would have already completed flow control
configuration.  This change removes unnecessary media changes in
controller reconfiguration cases such that it does not trigger link
reestablishment for configuration change requests like promiscuous
mode change.

Reported by:	Many
Tested by:	Mike Tancsa <mike <> sentex dot net>
MFC after:	1 week
2012-03-19 02:10:40 +00:00
Pyun YongHyeon
baaaeac947 Fix white space nits. 2012-03-14 00:54:37 +00:00
Pyun YongHyeon
f9d050a860 fxp(4) does not handle deferred dma map loading. Tell
bus_dmamap_load(9) that it should return immediately with error
when there are insufficient mapping resources.
2012-03-14 00:26:36 +00:00
Warner Losh
b64933321a Minor indenting divot... 2012-01-25 04:48:27 +00:00
Pyun YongHyeon
cbecedb2c5 TCP header size is represented by number of 32bits words.
Fix the TCP header size calculation such that makes TSO engine
cache all header(ethernet/IP/TCP) bytes to its internal buffer.
While here, remove extra pull up for TCP payload.  Unlike some
em(4) controllers, fxp(4) does not require such work around for
TSO.
The two limitations are ethernet/IP/TCP header size should be less
than or equal to the size of controller's internal buffer(80 bytes)
and these header information should be found in the first fragment
of a TSO frame.
2011-12-19 19:00:34 +00:00
Pyun YongHyeon
50df388d0e Enable CPUSaver D102 E-step microcode loading for 82551 revision
0x10.
2011-06-27 21:37:38 +00:00
Pyun YongHyeon
e8449b7908 Disable microcode loading for 82550 and 82550C controllers. Loading
the microcode caused SCB timeouts. Linux driver does not allow
microcode loading for these controllers and jfv also confirmed that
there is no need to do and it shouldn't.

PR:				kern/103332
Additional confirmation from:	jfv
MFC after:			1 week
2011-06-27 21:27:12 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Pyun YongHyeon
991ae908e3 Normally fxp(4) does not receive bad frames but promiscuous mode
makes controller to receive bad frames and i82557 will also receive
bad frames since fxp(4) have to receive VLAN oversized frames. If
fxp(4) encounter DMA overrun error, the received frame size would
be 0 so the actual frame size after checksum field extraction the
length would be negative(-2). Due to signed/unsigned comparison
used in driver, frame length check did not work for DMA overrun
frames. Correct this by casting it to int.
While I'm here explicitly check DMA overrun error and discard the
frame regardless of result of received frame length check.

Reported by:	n_hibma
Tested by:	n_hibma
MFC after:	1 week
2011-03-28 16:58:48 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Marius Strobl
658c839885 - Allocate the DMA memory shared between the host and the controller as
coherent.
- Update a comment to no longer reference Alpha.
2011-02-26 17:28:09 +00:00
Pyun YongHyeon
f6ff7180f8 Fix a regression introduced in r215906. The change made in r215906
caused link re-negotiation whenever application joins or leaves a
multicast group.  If driver is running, it would have established a
link so there is no need to start re-negotiation. The re-negotiation
broke established link which in turn stopped multicast application
working while re-negotiation is in progress.

PR:	kern/154667
MFC after:	1 week
2011-02-15 18:16:04 +00:00
Pyun YongHyeon
6e854927d1 If RX lockup workaround is enabled, fxp(4) will periodically reset
the controller to workaround silicon bug of i82557. Each reset will
re-establish link which in turn triggers MII status change
callback. The callback will try to reconfigure controller if the
controller is not i82557 to enable flow-control. This caused
endless link UP/DOWN when the workaround was enabled on non-i82557
controller.

To fix the issue, apply RX lockup workaround only for i82557.
Previously it blindly checked undocumented EEPROM location such
that it sometimes enabled the workaround for other controllers. At
this time, only i82557 is known to have the silicon bug.
This fixes a regression introduced in r215906 which enabled flow
control support for all controllers except i82557.

Reported by:	Karl Denninger (karl <> denninger dot net)
Tested by:	Karl Denninger (karl <> denninger dot net)
MFC after:	3 days
2010-12-02 03:53:29 +00:00
Marius Strobl
1845b5c37b Fix and implement missing parts of flow control support. This also removes
the dev.fxp.%d.noflow tunable as the same effect can now be achieved with
ifconfig(8) by setting the flowcontrol media option as desired (besides
the tunable never having a chance to actually enable flow control support
so far).
In joint forces with:	yongari
2010-11-26 21:52:33 +00:00
Marius Strobl
e0fe5c6dd3 - Sprinkle const on tables.
- Remove an alpha remnant.
- Minor comment and style fixes.
2010-11-23 21:09:42 +00:00
Pyun YongHyeon
713ca255b8 Add TSO support over VLAN for i82550/i82551. Controller requires
VLAN hardware tagging to make TSO work over VLAN. So if VLAN
hardware tagging is disabled explicitly clear TSO over VLAN. While
I'm here allow disabling VLAN TX checksum offloading.

Tested by:	Liudas < liudasb <> centras dot lt >
MFC after:	10 days
2010-10-24 21:59:51 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
96486faa6e Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
Pyun YongHyeon
f7a5f7371a If controller received bad frames make sure to update newly added
RFA. Also drop frames that have either CRC error or alignment
error. Normally bad frames are not received at all. But controllers
running in promiscuous mode will receive bad frames. 82557 will
also receive bad frames to receive VLAN oversized frames.

While I'm here mark RNR condition if driver happen to see RNR in
RFA status and restart RU to receive frames again. Because driver
checks all received frames in RX loop, RNR condition could be set
in the middle of RX processing. Just relying on RNR interrupt was
not enough.

This change fixes "Memory modified after free" issue when fxp(4)
is running as a member of if_bridge(4).

Tested by:	Larry Baird <lab <> gta dot com>
MFC after:	5 days
2010-05-14 17:39:28 +00:00
Pyun YongHyeon
01e3ef82d1 Dont' allow dma map load deferring. fxp(4) is not able to handle
EINPROGRESS.
2010-05-14 16:58:37 +00:00
Pyun YongHyeon
4812aef510 Controller updates RFA via DMA so driver needs synchronization.
Add missing BUS_DMASYNC_POSTWRITE and BUS_DMASYNC_PREREAD.
2010-05-14 16:55:13 +00:00
Pyun YongHyeon
8da9c50775 Export hardware MAC statistics through sysctl node. Previously
fxp(4) already used to extract most hardware MAC statistics but it
didn't show them. With this change, all MAC statistics counters
are exported. Because there are a couple of new counters for 82558
and 82559, enable extended MAC statistics functionality to get
these counters. Accoring to public data sheet, 82559 MAC statistics
return 24 DWORD counters(3 counters are unknown at this moment) so
increase MAC counter structure to meet the MAC statistics block size.
The completion of MAC counter dump is now checked against
FXP_STATS_DR_COMPLETE status code which is appended at the end of
status block. Previously fxp(4) ignored the status of the
FXP_SCB_COMMAND_CU_DUMPRESET command. fxp(4) does not wait for the
completion of pending command before issuing
FXP_SCB_COMMAND_CU_DUMPRESET. Instead it skips the command and try
it next time. This scheme may show better performance but there is
chance to loose updated counters after stopping controller. So make
sure to update MAC statistics in fxp_stop().
While I'm here move sysctl node creation to fxp_sysctl_node().

Tested by:	Larry Baird < lab <> gta dot com >
2010-05-09 22:16:15 +00:00
Pyun YongHyeon
7251782989 8255x configure command requires number of bytes of configuration
table. The default size of the configuration table was 22 bytes. To
use extended feature of 82550/82551 the configuration table size
was expanded to 32 bytes. The added configuration for 82550/82551
specifies VLAN hardware tagging and IPSec configuration as well as
TCO.
To make configuration easier fxp(4) used a configuration template
and the template was copied to configuration table. After that,
some parameters of the configuration table was changed depending on
controller type and operation mode. However the size of template
was 22 bytes so some configuration parameters were not properly
initialized on 82550/82551.
Fix this by increasing the template size. For 82557, 82558 and
82559 the size of the configuration is still 22 bytes.
2010-05-07 18:03:35 +00:00
Pyun YongHyeon
a026a25b1d It seems controller has two types of promiscuous control, one for
unicast and the other for multicast. To receive multicast frames
that host didn't join in promiscuous mode, driver have to set
promiscuous mode for multicast frames as well.
The Open Source Software Developer Manual for i8255x was not clear
how to handle promiscuous mode.

PR:		kern/145905
MFC after:	5 days
2010-05-07 16:43:00 +00:00
Pyun YongHyeon
6da6d0a9e3 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
Pyun YongHyeon
829b278e5e It seems some 82559ER controllers do not support Rx checksum
offloading. Datasheet said nothing about the limitation of 82559ER
except WOL. Explicitly disable Rx checksum offloading for
controllers that is known to lack the capability.

PR:	kern/138135
Tested by:	Gooderum, Mark < mgooderum <> websense dot com >
2009-09-28 19:40:16 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Pyun YongHyeon
b96ad4b205 For ICH based fxp(4) controllers treat them as 82559 compatibles.
To detect which controller is ICH based one, add a new member
variable ich to struct fxp_ident and move the struct to
if_fxpvar.h. Since I've faked controller revision, don't allow
microcode loading for ICH based controllers.
With this change all ICH based controllers will have WOL and Rx
checksum offload capability.

PR:		kern/135451
Tested by:	Alexey Shuvaev ( shuvaev <> physik dot uni-wuerzburg dot de ),
		pluknet ( pluknet <> gmail dot com ),
		Gary Jennejohn ( gary.jennejohn <> freenet dot de )
2009-06-21 07:34:12 +00:00
Pyun YongHyeon
6b24912cd9 Overhaul fxp(4) multicast filter programming. fxp(4) hardwares do
not allow multicast filter programming when controller is busy to
send/receive frames. So it used to mark need_mcsetup bit and defer
multicast filter programming until controller becomes idle state.
To detect when the controller is idle fxp(4) relied on Tx
completion interrupt with NOP command and fxp_start_body and
fxp_intr_body had to see whether pending multicast filter
programming was requested. This resulted in very complex logic and
sometimes it did not work as expected.
Since the controller should be in idle state before any multicast
filter modifications I changed it to reinitialize the controller
whenever multicast filter programming is required. This is the same
way what OpenBSD and NetBSD does. Also I added IFF_DRV_RUNNING
check in ioctl handler so controller would be reinitialized only if
it is absolutely needed.
With this change I guess we can remove fxp(4) DELAY hack in ifioctl
for IPv6 case.
2009-06-21 07:17:49 +00:00
Pyun YongHyeon
c109e385f6 Always check fxp(4) is running, see if it can accept frames from
upper stack in fxp_start_body().
fxp(4) drops driver lock in Rx path so check the fxp(4) is still
running after reacquiring driver lock in Rx path. Also don't
invoke fxp_intr_body if fxp(4) is not running. With this change
there is no need to set suspend bit in device attach phase.
2009-06-21 06:46:32 +00:00