The distance between ticks and td_swvoltick should be calculated as
an unsigned number. Previously we could end up comparing a negative
number with hogticks in which case should_yield() would give incorrect
answer.
We should probably ensure that td_swvoltick is properly initialized.
Sponsored by: HybridCluster
MFC after: 5 days
Unconditionally freeing a page is not good, especially if it is the page
that was wired by the caller. The checks are picked up from
kern_sendfile.
MFC after: 3 weeks
Merge from UFS r231313:
This change first attempts the uiomove() to the newly allocated
(and dirty) buffer and only zeros it if the uiomove() fails. The
effect is to eliminate the gratuitous zeroing of the buffer in
the usual case where the uiomove() successfully fills it.
MFC after: 3 days
credentials to the kernel rpc. Modify the NFSv4 client to add
support for the gssname and allgssname mount options to use this
capability. Requires the gssd daemon to be running with the "-h" option.
Reviewed by: jhb
- Fix sysctl wrapper for sysfs attributes to properly handle new string
values similar to sysctl_handle_string() (only copyin the user's
supplied length and nul-terminate the string).
- Don't check for a trailing newline when evaluating the desired operating
mode of a mlx4 device.
PR: kern/179999
Submitted by: Shahar Klein <shahark@mellanox.com>
MFC after: 1 week
They originated in the original Octeon port. They weren't present, as
far as I can tell, on the projects/mips branch until after this
point. They were in the original Octeon port in code picked up from
the vendor, who I've been able to find out trolling old email put them
there to get around an SMP problem that most likely was fixed in other
ways.
NetBSD and Linux don't have these, except for some specific uses of
SYNC on the alchemy parts (which we don't support, but even if we did
it is only a specific case and would be specifically coded
anyway). This is true of the current Linux code, as well as one old
version I polled.
I looked back at the old R12000, R8000, R6000, R4000, R4400 errata
that I have, and could find no mention of SYNC needing NOPs for
silicon bugs (although plenty of other cases where NOPs and other
contortions were needed).
An Google search turned up no old mailing list discussions on this on
Linux, NetBSD or FreeBSD (except the disussion that kicked off these
studies).
I've test booted this on my Octeon Plus eval board and survived a
buildworld. Adrian Chadd reports that this patch has no ill effects on
the Ahteros platforms he tested it on.
I conclude it is safe to just remove the NOPs. But added
__MIPS_PLATFORM_SYNC_NOPS as a failsafe in case we find some platform
where these are, in fact, required.
Reviewed by: adrian@
apply diff to compat/linux versions).
- The cp implies an update of videodev2.h to the linux kernel 2.6.34.14 one.
The update makes video in skype v4 work on FreeBSD.
Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com>
(update of header only)
This is a port of NetBSD's GSoC 2012 Ext3 HTree directory indexing
by Vyacheslav Matyushin. It was cleaned up and enhanced for FreeBSD
by Zheng Liu (lz@).
This is an excellent example of work shared among different projects:
Vyacheslav was able to look at an early prototype from Zheng Liu who
was also able to check the code from Haiku (with permission).
As in linux, the feature is not available by default and must be
enabled explicitly with tune2fs. We still do not support the
workarounds required in readdir for NFS.
Submitted by: Zheng Liu
Tested by: Mike Ma
Sponsored by: Google Inc.
MFC after: 1 week
of Skyhawk adapters.
Many thanks to Emulex for their continued support of FreeBSD.
Submitted by: "Duvvuru,Venkat Kumar" <VenkatKumar.Duvvuru Emulex.Com>
MFC after: 1 day
This follows section 18.4.2.2 SD Soft Reset Flow in the TI AM335x Technical
Reference Manual and seems to fix the "ti_mmchs0: Error: current cmd NULL,
already done?" messages.
full issue with ARC-1214 and ARC-1224.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 1 day
user, where when more than one hpt27xx adapters are being used,
the "unit number" stays at 0.
Many thanks to HighPoint for providing this driver update.
MFC after: 1 day
controllers. Update the hptiop(4) manual page to reflect this
as well as mentioning that some cards are already end-of-life.
Many thanks to Highpoint for providing this driver update.
MFC after: 1 day
/dev/kmem and /dev/mem (in addition to traditional file permission checks).
PRIV_KMEM_READ is different from other PRIV_* checks in that it's allowed
by default.
Reviewed by: kib, mckusick
Quoting illumos issue #3836:
Currently zio_free() always puts the zio on a list for subsequent
processing by zio_free_sync(). This is only necessary for frees that
might need to issue reads (gang and dedup blocks).
By processing the majority of the frees as we encounter them, we reduce
the amount of time that the spa_sync() thread spends burning CPU and
not doing any i/o, thus increasing the overall write throughput of the
system.
Illumos ZFS issues:
3836 zio_free() can be processed immediately in the common case
MFC after: 1 week
Gcc outputs pre-UAL asm and expects the ldcl instruction with a condition
in the form ldc<c>l, where the code produces the instruction in the UAL
form ldcl<c>. Work around this by checking if we are using clang or gcc and
adjusting the instruction.
While here correct the cmp instruction's value to include the # before the
immediate value.
when the interface is up.
- Add a tunable to control the TOE's rx coalesce feature (enabled by
default as it always has been). Consider the interface MTU or the
coalesce size when deciding which cluster zone to use to fill the
offload rx queue's free list. The tunable is:
dev.{t4nex,t5nex}.<N>.toe.rx_coalesce
MFC after: 1 day
* Add 802.11n 2ghz and 5ghz tables, including legacy rates and up to
MCS23 rates (3x3.)
* Populate the rate code -> rate index lookup table with MCS _and_
normal rates, but _not_ the basic rate flag. Since the basic rate flag
is the same as the MCS flag, we can only use one.
* Introduce some accessor inlines that do PLCP and rate table lookup/access
and enforce that it doesn't set the basic rate bit. They're not
designed for MCS rates, so it will panic.
* Start converting drivers that use the rate table stuff to use the
accessor inlines and strip the basic flag.
* Teach AMRR about basic 11n - it's still as crap for MCS as it is
being used by iwn, so it's not a step _backwardS_.
* Convert iwn over to accept 11n MCS rates rather than 'translate' legacy
to MCS rates. It doesn't use a lookup table any longer; instead it's a
function which takes the current node (for HT parameters) and the
rate code, and returns the hardware PLCP code to use.
Tested:
* ath - it's a no-op, and it works that way
* iwn - both 11n and non-11n
ePWM is controlled by sysctl nodes dev.am335x_pwm.N.period,
dev.am335x_pwm.N.dutyA and dev.am335x_pwm.N.dutyB that controls
PWM period and duty cycles for channels A and B respectively.
Period and duty cycle are measured in clock ticks. Default
clock frequency for AM335x PWM subsystem is 100MHz
It's not enabled by default in net80211 so this is a no-op unless
if you enable it (ifconfig wlan0 powersave).
Tested:
* iwn0: <Intel WiFi Link 5100> mem 0xf4300000-0xf4301fff irq 17 at device 0.0 on pci3
TODO:
* .. test on all the other NICs
* See if I have to disable it during scan and such
* Make it configurable live, rather than only after it's done its initial
receive calibration.
dereferencing, when checking for SO_REUSEPORT option (and SO_REUSEADDR
for multicast), INP_REUSEPORT flag was introduced to cache the socket
option. It was decided then that one flag would be enough to cache
both SO_REUSEPORT and SO_REUSEADDR: when processing SO_REUSEADDR
setsockopt(2), it was checked if it was called for a multicast address
and INP_REUSEPORT was set accordingly.
Unfortunately that approach does not work when setsockopt(2) is called
before binding to a multicast address: the multicast check fails and
INP_REUSEPORT is not set.
Fix this by adding INP_REUSEADDR flag to unconditionally cache
SO_REUSEADDR.
PR: 179901
Submitted by: Michael Gmelin freebsd grem.de (initial version)
Reviewed by: rwatson
MFC after: 1 week
r252680:
Fix SIM lock not owned panic
The CAM locking requirements of registering an async
callback has changed so the SIM lock must be held. Remove
code that explicitly dropped the lock around the register.
Also return CAM_SEL_TIMEOUT instead of CAM_TID_INVALID
for bad targets to avoid a lot console spam during bus
scans.
MFC after: 1 month
This commit is primarily a significant cleanup to the interrupt
allocation code that had gotten a bit jumbled from having to
support per-vq MSIX, shared MSIX, MSI, and legacy style interrupts.
Contains projects/virtio commits:
r246064:
virtio_pci: Rewrite allocation of interrupts
r246065:
virtio_pci: Remove spaces before a tab
r246066:
virtio_pci: Dynamically allocate the virtqueue array
r246304:
virtio_pci: Clean up after failed virtqueue alloc attempt
r246305:
virtio_pci: Move no interrupt check into the PCI interrupt handlers
r246308:
virtio_pci: Remove unused variable
MFC after: 1 month
Minor changes to the network driver. A multiqueue driver that is
a significant rewrite will be in merged shortly.
Contains projects/virtio commits:
r246058:
vtnet: Move an mbuf ASSERT to the calling function
r246059:
vtnet: Tweak ASSERT message
MFC after: 1 month
Contains projects/virtio commits:
r245717:
virtio_balloon: Make the softc lock a regular mutex
r245718:
virtio_balloon: Remove two unuseful ASSERTs
r245719:
virtio_balloon: More verbose ASSERT messages
r245720:
virtio_balloon: Simplify lowmem handling in vtballoon_inflate()
r252530:
virtio_balloon: Use just a kthread instead of dedciated kproc
r252568:
virtio_balloon: Need to use kthread_exit() after r252530
MFC after: 1 month
The notable changes of this commit are support for disk resizing
and chases updates to the spec regarding write caching.
Contains projects/virtio commits:
r245713:
virtio_blk: Replace __FUNCTION__ with __func__
r245714:
virtio_blk: Use more consistent mutex name
r245715:
virtio_blk: Print device name too if failed to reinit during dump
r245716:
virtio_blk: Remove an unuseful ASSERT
r245723:
virtio_blk: Record the vendor and device information
r245724:
virtio_blk: Add resize support
r245726:
virtio_blk: More verbose ASSERT messages
r245730:
virtio_blk: Tweak resize announcement message
r246061:
virtio_blk: Do not always read entire config
r246062:
virtio_blk: Use topology to set the stripe size/offset
r246307:
virtio_blk: Correct stripe offset calculation
r246063:
virtio_blk: Add support for write cache enable feature
r246303:
virtio_blk: Expand a comment
r252529:
virtio_blk: Improve write cache handling
r252681:
virtio_blk: Remove unneeded curly braces
MFC after: 1 month
Contains projects/virtio commits:
r245709:
Each VirtIO device was scheduling its own taskqueue(9) to do the
off-level interrupt handling. ithreads(9) is the more nature way
to do this. The primary motivation for this work to better support
network multiqueue.
r245710:
virtio: Change virtqueue intr handlers to return void
r245711:
virtio_blk: Remove interrupt taskqueue
r245721:
vtnet: Remove interrupt taskqueue
r245722:
virtio_scsi: Remove interrupt taskqueue
r245747:
vtnet: Remove taskqueue fields missed in r245721
MFC after: 1 month
pmap_remove_all()
This flag should already be cleared by pmap_nuke_pv()
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
When doing pmap_enter_locked(), enable write permission only when access
type indicates attempt to write. Otherwise, leave the page read only but
mark it writable in pv_flags.
This will result in:
1. Marking page writable during pmap_enter() but only when ensured that it
will be written right away so that we will not get redundant permissions
fault on write attempt.
2. Keeping page read only when it is permitted to be written but there was
no actual write attempt. Hence, we will get permissions fault on write
access and mark page writable in pmap_fault_fixup() what will indicate
modification status.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
This is an AR7240 based device with an AR9285 on-board.
I've tested the initial boot and wifi support; however at the moment
the ethernet switch driver doesn't seem to be picking up carrier on the
active ethernet port. Basic flood pinging works however, so I think
we're on the right track.
Thank you to Adrian Woodley <adrian@diskworld.com.au> for purchasing me
one of these devices to bootstrap FreeBSD-HEAD on.
in the ithread code where we could lose ithread interrupts if
intr_event_schedule_thread() is called while the ithread is already
running. Effectively memory writes could be ordered incorrectly
such that the unatomic write of 0 to ithd->it_need (in ithread_loop)
could be delayed until after it was set to be triggered again by
intr_event_schedule_thread().
This was particularly a big problem for CAM because CAM optimizes
scheduling of ithreads such that it only signals camisr() when it
queues to an empty queue. This means that additional completion
events would not unstick CAM and quickly lead to a complete lockup
of the CAM stack.
To fix this use atomics in all places where ithd->it_need is accessed.
Submitted by: delphij, mav
Obtained from: TrueOS, iXsystems
MFC After: 1 week
would sometimes result in a corrupted file was reported via email.
This problem appears to have been caused by r251719 (reverting
r251719 fixed the problem). Although I have not been able to
reproduce this problem, I suspect it is caused by another thread
increasing np->n_size after the mtx_unlock(&np->n_mtx) but before
the vnode_pager_setsize() call. Since the np->n_mtx mutex serializes
updates to np->n_size, doing the vnode_pager_setsize() with the
mutex locked appears to avoid the problem.
Unfortunately, vnode_pager_setsize() where the new size is smaller,
cannot be called with a mutex held.
This patch returns the semantics to be close to pre-r251719 such that the
call to the vnode_pager_setsize() is only delayed until after the mutex is
unlocked when np->n_size is shrinking. Since the file is growing
when being written, I believe this will fix the corruption.
Reported by: David G. Lawrence (dg@dglawrence.com)
Tested by: David G. Lawrence (pending, to happen soon)
Reviewed by: kib
MFC after: 1 week
Ensure that d_delmaxsize is always set, removing init to 0 which could cause
future issues if use cases change.
Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased
up to the calculated max after being reduced.
MFC after: 1 day
X-MFC-With: r249940
reset by pmap_page_init() right after being initialized in vm_page_initfake().
The statement above is with reference to the amd64 implementation of
pmap_page_init().
Fix this by calling 'pmap_page_init()' in 'vm_page_initfake()' before changing
the 'memattr'.
Reviewed by: kib
MFC after: 2 weeks
Force UMA zone to allocate service structures like slabs using own
allocator. uma_debug code performs atomic ops on uma_slab_t fields
and safety of this operation is not guaranteed for write-back caches
bit when looking up the vm_page associated with the superpage's physical
address.
If the caching attribute for the mapping is write combining or write protected
then the PG_PDE_PAT bit will be set and thus cause an 'off-by-one' error
when looking up the vm_page.
Fix this by using the PG_PS_FRAME mask to compute the physical address for
a superpage mapping instead of PG_FRAME.
This is a theoretical issue at this point since non-writeback attributes are
currently used only for fictitious mappings and fictitious mappings are not
subject to promotion.
Discussed with: alc, kib
MFC after: 2 weeks
we are probing a PCI-PCI bridge it is because we found one by enumerating
the devices on a PCI bus, so the bridge is definitely present. A few
BIOSes report incorrect status (_STA) for some bridges that claimed they
were not present when in fact they were.
While here, move this check earlier for Host-PCI bridges so attach fails
before doing any work that needs to be torn down.
PR: kern/91594
Tested by: Jack Vogel @ Intel
MFC after: 1 week
would sometimes result in a corrupted file was reported via email.
This problem appears to have been caused by r251719 (reverting
r251719 fixed the problem). Although I have not been able to
reproduce this problem, I suspect it is caused by another thread
increasing np->n_size after the mtx_unlock(&np->n_mtx) but before
the vnode_pager_setsize() call. Since the np->n_mtx mutex serializes
updates to np->n_size, doing the vnode_pager_setsize() with the
mutex locked appears to avoid the problem.
Unfortunately, vnode_pager_setsize() where the new size is smaller,
cannot be called with a mutex held.
This patch returns the semantics to be close to pre-r251719 (actually
pre-r248567, r248581, r248567 for the new client) such that the call to
vnode_pager_setsize() is only delayed until after the mutex is
unlocked when np->n_size is shrinking. Since the file is growing
when being written, I believe this will fix the corruption.
A better solution might be to replace the mutex with a sleep lock,
but that is a non-trivial conversion, so this fix is hoped to be
sufficient in the meantime.
Reported by: David G. Lawrence (dg@dglawrence.com)
Tested by: David G. Lawrence (to be done soon)
Reviewed by: kib
MFC after: 1 week
is initialized with !ND6_IFF_AUTO_LINKLOCAL && !ND6_IFF_ACCEPT_RTADV
regardless of net.inet6.ip6.accept_rtadv and net.inet6.ip6.auto_linklocal.
To configure an autoconfigured link-local address (RFC 4862), the
following rc.conf(5) configuration can be used:
ifconfig_bridge0_ipv6="inet6 auto_linklocal"
- if_bridge(4) now removes IPv6 addresses on a member interface to be
added when the parent interface or one of the existing member
interfaces has an IPv6 address. if_bridge(4) merges each link-local
scope zone which the member interfaces form respectively, so it causes
address scope violation. Removal of the IPv6 addresses prevents it.
- if_lagg(4) now removes IPv6 addresses on a member interfaces
unconditionally.
- Set reasonable flags to non-IPv6-capable interfaces. [*]
Submitted by: rpaulo [*]
MFC after: 1 week
system has svnliteversion.
- If svnliteversion is not found, look for svnversion in /usr/bin
and /usr/local/bin, since svnlite can be installed as svn if
WITH_SVN is set.[1]
- Remove /bin from binary search paths.[1]
Discussed with: kib [1]
MFC after: 3 days
Approved by: kib (mentor)
algorithm, which is based on the 2011 v0.1 patch release and described in the
paper "Revisiting TCP Congestion Control using Delay Gradients" by David Hayes
and Grenville Armitage. It is implemented as a kernel module compatible with the
modular congestion control framework.
CDG is a hybrid congestion control algorithm which reacts to both packet loss
and inferred queuing delay. It attempts to operate as a delay-based algorithm
where possible, but utilises heuristics to detect loss-based TCP cross traffic
and will compete effectively as required. CDG is therefore incrementally
deployable and suitable for use on shared networks.
In collaboration with: David Hayes <david.hayes at ieee.org> and
Grenville Armitage <garmitage at swin edu au>
MFC after: 4 days
Sponsored by: Cisco University Research Program and FreeBSD Foundation
If n fds were passed, it would receive the first one n times.
Reported by: Shawn Webb <lattera@gmail.com>, koobs, gleb
Tested by: koobs, gleb
Reviewed by: pjd
in gpart(8) and boot(8), adding references to gptboot(8) in both.
Reviewed by: jhb, ae, pjd, Paul Schenkeveld <bsdcan@psconsult.nl>, david_a_bright@dell.com (portions), gjb
MFC after: 1 week
Revert the simplification of the i_gen calculation.
It is still a good idea to avoid zero values and for the case
of old filesystems there is probably no advantage in using
the complete 32 bits anyways.
Discussed with: bde
MFC after: 4 weeks
will crash when doing a large write, since m_get2() would
return NULL. This patch fixes the problem, since nfsm_uiotombuf()
will allocate additional mbufs, as required.
Reported by: sbruno
Tested by: sbruno
Discussed with: glebius
While this prevents commands getting stuck forever there is no way to guarantee
that data from the command hasn't been committed to the device.
In addition older mfi firmware has a bug that would cause the controller to
frequently stall IO for over our timeout value, which when combined with
a forced timeout often resulted in panics in UFS; which would otherwise be
avoided when the command eventually completed if left alone.
For reference this timeout issue is resolved in Dell FW package 21.2.1-0000.
Fixed FW package version for none Dell controller will likely vary.
MFC after: 2 days
Further simplify the i_gen calculation for older disks.
Having a zero here is not really a problem and this is more
similar to what is done in newfs_random().
Reported by: Xin Li
MFC after: 4 weeks
