partitions. Several utilities still use this interface and require
additional information since gpart was activated than before. This
allows fsck of a UFS partition without having to specify it is UFS,
per historic behavior.
For OMAP4, the old values for 1MHz gave a bus frequency of about 890KHz.
The new numbers hit 1MHz exactly.
For AM335x the prescaler values are adjusted to give a 24MHz clock for
all 3 standard speeds, as the manual recommends (as near as we can tell,
there are errors and typos apparent in the document). Also, 1MHz speed
is added, and has been tested successfully on a BeagleboneWhite board.
PR: 195009
The current support for controlling i2c bus speed is an inconsistant mess.
There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST.
It seems to be universally assumed that SLOW means the standard 100KHz
rate from the original spec. Nothing ever calls iicbus_reset() with a
speed of FAST, although some drivers would treat it as the 400KHz standard
speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or
FASTEST, and there's really no telling what any individual driver will do
with those.
The speed of an i2c bus is limited by the speed of the slowest device on
the bus. This means that generally the bus speed needs to be configured
based on the board/system and the components within it. Historically for
i2c we've configured with device hints. Newer systems use FDT data and it
documents a clock-frequency property for i2c busses. Hobbyists and
developers are likely to want on the fly changes. These changes provide
all 3 methods, but do not require any existing drivers to change to use
the new facilities.
This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the
frequency for the requested symbolic speed. If the symbolic speed is SLOW
or if there is no speed configured for the bus, the returned value is
100KHz, always. Otherwise, if bus speed is configured by hints, fdt,
tunable, or sysctl, that speed is returned. It also adds a helper
function, iicbus_init_frequency() that any bus driver subclassed from
iicbus can initialize the frequency from some other source of info.
Initial driver implementations are provided for Freescale and TI.
Differential Revision: https://reviews.freebsd.org/D1174
PR: 195009
This is the general support to allow the use of GPIO pins as interrupt
sources for direct gpiobus children.
The use of GPIO pins as generic interrupt sources (for an ethernet driver
for example) will only be possible when arm/intrng is complete. Then, most
of this code will need to be rewritten, but it works for now, is better
than what we have and will allow further developments.
Tested on: ar71xx (RSPRO), am335x (BBB), bcm2835 (Raspberry pi)
Differential Revision: https://reviews.freebsd.org/D999
Reviewed by: rpaulo
a probe name. When dtrace -G builds up a DOF section for the specified
provider(s), the probe function names are truncated to fit in this limit.
The DOF is later used to build the symbol table for the generated object
file, so the table can end up with truncated references, causing link
errors.
Instead of potentially truncating symbol table entries, write the full
function name to the DOF string table and allow the kernel to enforce the
128-byte function name limit when a process attempts to load its DOF.
PR: 194757
Differential Revision: https://reviews.freebsd.org/D1175
Reviewed by: rpaulo
MFC after: 2 weeks
workdir which would break the upgrade process upon reboot.
Currently we check for tmpfs and mdmfs.
PR: 195006
Differential Revision: https://reviews.freebsd.org/D1163
Approved by: cperciva
This rounding up was lost in a mismerge of illumos code.
See r268075 MFV r267565.
After that commit zio_compress_data() no longer performs any compressed
size adjustment, so it needs to be done externally. On FreeBSD we round
up the size using vdev_ashift rather than SPA_MINBLOCKSIZE so that 4KB
devices are properly supported.
Additionally, zero out the buffer tail only if compression succeeds.
The compression is considered successful if the size of compressed
data after rounding up to account for the vdev ashift is less than the
original data size. It does not make sense to have the data compressed
if all the savings are lost to rounding up.
With the new zio_compress_data() it could have been possible that the
rounded compressed size would be greater than the original size and thus
we could zero beyond the allocated buffer if the zeroing code was kept
at the original place.
Discussed with: delphij, gibbs
MFC after: 2 weeks
X-MFC with: r274627
Size of physical ZIOs must never be implicitly adjusted, it's
a responsibility of a caller to make sure that such a ZIO has proper offset
and size.
Discussed with: delphij, gibbs
MFC after: 2 weeks
their #ifdef equivalents for everything changed in contrib/netbsd-tests. There
are some items from the vendor tree that use #if defined(__FreeBSD__) or
#if defined(__NetBSD__) which are being left alone
Requested by: bde, rpaulo
Sponsored by: EMC / Isilon Storage Division
After r265152 TRIM requests are ZIO_TYPE_FREE instead of ZIO_TYPE_IOCTL
this meant file backed vdevs to attempted to process the ZIO as a write
causing a panic.
We now disable TRIM on file backed vdevs and ASSERT the ZIO types supported
by each vdev type to ensure we explicity support the ZIO type being
processed.
Also ensure that TRIM on init is not procesed for devices which declare they
didn't support TRIM via vdev_notrim.
PR: 195061, 194976, 191573
Sponsored by: Multiplay
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.
Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.
New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.
route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.
PR: 194238
MFC after: 1 month
CR: D1125
We used to invalidate the cache for PREREAD alone, or writeback+invalidate
for PREREAD with PREWRITE, then treat POSTREAD as a no-op. Prefetching on
modern systems can lead to parts of a DMA buffer getting pulled into the
caches while DMA is in progress (due to access of "nearby" data), so it's
mandatory to invalidate during the POSTREAD sync even if a PREREAD
invalidate also happened.
In the PREREAD case the invalidate is done to ensure that there are no
dirty cache lines that might get automatically evicted during the DMA,
corrupting the buffer. In a PREREAD+PREWRITE case the writeback which is
required for PREWRITE handling is suffficient to avoid corruption caused
by eviction and no invalidate need be done until POSTREAD time.
Submitted by: Michal Meloun <meloun@miracle.cz>
The PREWRITE handling does a writeback of any dirty cachelines, so there's
no danger of an eviction during the DMA corrupting the buffer. There will
be an invalidate done during POSTREAD, so doing it before the read too is
wasted time.
(arm, mips, powerpc). This fixes the build on these platforms, based on some
ad hoc tinderbox runs I did a while ago
- Skip cast the arguments to powl as long double so powl properly interprets
those arugments at compile-time when picking the type
Sponsored by: EMC / Isilon Storage Division
