The pfi_skip_if() function sometimes caused skipping of groups to work,
if the members of the group used the groupname as a name prefix.
This is often the case, e.g. group lo usually contains lo0, lo1, ...,
but not always.
Rather than relying on the name explicitly check for group memberships.
Obtained from: OpenBSD (pf_if.c,v 1.62, pf_if.c,v 1.63)
Sponsored by: Essen Hackathon
Synproxy was accidentally broken by r335569. The 'return (action)' must be
executed for every non-PF_PASS result, but the error packet (TCP RST or ICMP
error) should only be sent if the packet was dropped (i.e. PF_DROP) and the
return flag is set.
PR: 229477
Submitted by: Andre Albsmeier <mail AT fbsd.e4m.org>
MFC after: 1 week
When shutting down a vnet jail pf_shutdown() clears the remaining states, which
through pf_clear_states() calls pf_unlink_state().
For synproxy states pf_unlink_state() will send a TCP RST, which eventually
tries to schedule the pf swi in pf_send(). This means we can't remove the
software interrupt until after pf_shutdown().
MFC after: 1 week
Several third-parties use at least some of these ioctls. While it would be
better for regression testing if they were used in base (or at least in the
test suite), it's currently not worth the trouble to push through removal.
Submitted by: antoine, markj
Several ioctls are unused in pf, in the sense that no base utility
references them. Additionally, a cursory review of pf-based ports
indicates they're not used elsewhere either. Some of them have been
unused since the original import. As far as I can tell, they're also
unused in OpenBSD. Finally, removing this code removes the need for
future pf work to take them into account.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D16076
States learned via pfsync from a peer with the same ruleset checksum were not
getting assigned to rules like they should because pfsync_in_upd() wasn't
passing the PFSYNC_SI_CKSUM flag along to pfsync_state_import.
PR: 229092
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
Obtained from: OpenBSD
MFC after: 1 week
Sponsored by: InnoGames GmbH
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
If a locally generated packet is routed (with route-to/reply-to/dup-to) out of
a different interface it's passed through the firewall again. This meant we
lost the inp pointer and if we required the pointer (e.g. for user ID matching)
we'd deadlock trying to acquire an inp lock we've already got.
Pass the inp pointer along with pf_route()/pf_route6().
PR: 228782
MFC after: 1 week
Given that PF_RULES_LOCK is a mostly read lock, replace the rwlock with rmlock.
This change improves packet processing rate in high pps environments.
Benchmarking by olivier@ shows a 65% improvement in pps.
While here, also eliminate all appearances of "sys/rwlock.h" includes since it
is not used anymore.
Submitted by: farrokhi@
Differential Revision: https://reviews.freebsd.org/D15502
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
pf ioctls frequently take a variable number of elements as argument. This can
potentially allow users to request very large allocations. These will fail,
but even a failing M_NOWAIT might tie up resources and result in concurrent
M_WAITOK allocations entering vm_wait and inducing reclamation of caches.
Limit these ioctls to what should be a reasonable value, but allow users to
tune it should they need to.
Differential Revision: https://reviews.freebsd.org/D15018
Ensure that multiplications for memory allocations cannot overflow, and
that we'll not try to allocate M_WAITOK for potentially overly large
allocations.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
There's no obvious limit to the request size for these, so we limit the
requests to something which won't overflow. Change the memory allocation
to M_NOWAIT so excessive requests will fail rather than stall forever.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
Limit the allocation to required size (or the user allocation, if that's
smaller). That does mean we need to do the allocation with the rules
lock held (so the number doesn't change while we're doing this), so it
can't M_WAITOK.
MFC after: 1 week
The DIOCRADDTABLES and DIOCRDELTABLES ioctls can process a number of
tables at a time, and as such try to allocate <number of tables> *
sizeof(struct pfr_table). This multiplication can overflow. Thanks to
mallocarray() this is not exploitable, but an overflow does panic the
system.
Arbitrarily limit this to 65535 tables. pfctl only ever processes one
table at a time, so it presents no issues there.
MFC after: 1 week
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
If a user attempts to add two tables with the same name the duplicate table
will not be added, but we forgot to free the duplicate table, leaking memory.
Ensure we free the duplicate table in the error path.
Reported by: Coverity
CID: 1382111
MFC after: 3 weeks
If the user configures a states_hashsize or source_nodes_hashsize value we may
not have enough memory to allocate this. This used to lock up pf, because these
allocations used M_WAITOK.
Cope with this by attempting the allocation with M_NOWAIT and falling back to
the default sizes (with M_WAITOK) if these fail.
PR: 209475
Submitted by: Fehmi Noyan Isi <fnoyanisi AT yahoo.com>
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14367
When INVARIANTS is not set the 'last' variable is not used, which can generate
compiler warnings.
If this invariant is ever violated it'd result in a KASSERT failure in
refcount_release(), so this one is not strictly required.
pf_unlink_state() releases a reference to the state without checking if
this is the last reference. It can't be, because pf_state_insert()
initialises it to two. KASSERT() that this is always the case.
CID: 1347140
pfioctl() handles several ioctl that takes variable length input, these
include:
- DIOCRADDTABLES
- DIOCRDELTABLES
- DIOCRGETTABLES
- DIOCRGETTSTATS
- DIOCRCLRTSTATS
- DIOCRSETTFLAGS
All of them take a pfioc_table struct as input from userland. One of
its elements (pfrio_size) is used in a buffer length calculation.
The calculation contains an integer overflow which if triggered can lead
to out of bound reads and writes later on.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This is an import of Alexander Bluhm's OpenBSD commit r1.60,
the first chunk had to be modified because on OpenBSD the
'cut' declaration is located elsewhere.
Upstream report by Jingmin Zhou:
https://marc.info/?l=openbsd-pf&m=150020133510896&w=2
OpenBSD commit message:
Use a 32 bit variable to detect integer overflow when searching for
an unused nat port. Prevents a possible endless loop if high port
is 65535 or low port is 0.
report and analysis Jingmin Zhou; OK sashan@ visa@
Quoted from: https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/net/pf_lb.c
PR: 221201
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: OpenBSD via ElectroBSD
MFC after: 1 week
pf_purge_thread() breaks up the work of iterating all states (in
pf_purge_expired_states()) and tracks progress in the idx variable.
If multiple vnets exist this results in pf_purge_thread() only calling
pf_purge_expired_states() for part of the states (the first part of the
first vnet, second part of the second vnet and so on).
Combined with the mark-and-sweep approach to cleaning up old rules (in
V_pf_unlinked_rules) that resulted in pf freeing rules that were still
referenced by states. This in turn caused panics when pf_state_expires()
encounters that state and attempts to access the rule.
We need to track the progress per vnet, not globally, so idx is moved
into a per-vnet V_pf_purge_idx.
PR: 219251
Sponsored by: Hackathon Essen 2017
When running the vnet init code (pf_load_vnet()) we used to iterate over
all vnets, marking them as unhooked.
This is incorrect and leads to panics if pf is unloaded, as the unload
code does not unregister the pfil hooks (because the vnet is marked as
unhooked).
There's no need or reason to touch other vnets during initialisation.
Their pf_load_vnet() function will be triggered, which handles all
required initialisation.
Reviewed by: zec, gnn
Differential Revision: https://reviews.freebsd.org/D10592
vnet_pf_uninit() is called through vnet_deregister_sysuninit() and
linker_file_unload() when the pf module is unloaded. This is executed
after pf_unload() so we end up trying to take locks which have been
destroyed already.
Move pf_unload() to a separate SYSUNINIT() to ensure it's called after
all the vnet_pf_uninit() calls.
Differential Revision: https://reviews.freebsd.org/D10025
When forwarding pf tracks the size of the largest fragment in a fragmented
packet, and refragments based on this size.
It failed to ensure that this size was a multiple of 8 (as is required for all
but the last fragment), so it could end up generating incorrect fragments.
For example, if we received an 8 byte and 12 byte fragment pf would emit a first
fragment with 12 bytes of payload and the final fragment would claim to be at
offset 8 (not 12).
We now assert that the fragment size is a multiple of 8 in ip6_fragment(), so
other users won't make the same mistake.
Reported by: Antonios Atlasis <aatlasis at secfu net>
MFC after: 3 days
Prevent possible races in the pf_unload() / pf_purge_thread() shutdown
code. Lock the pf_purge_thread() with the new pf_end_lock to prevent
these races.
Use a shared/exclusive lock, as we need to also acquire another sx lock
(VNET_LIST_RLOCK). It's fine for both pf_purge_thread() and pf_unload()
to sleep,
Pointed out by: eri, glebius, jhb
Differential Revision: https://reviews.freebsd.org/D10026
In pf_route6() we re-run the ruleset with PF_FWD if the packet goes out
of a different interface. pf_test6() needs to know that the packet was
forwarded (in case it needs to refragment so it knows whether to call
ip6_output() or ip6_forward()).
This lead pf_test6() to try to evaluate rules against the PF_FWD
direction, which isn't supported, so it needs to treat PF_FWD as PF_OUT.
Once fwdir is set correctly the correct output/forward function will be
called.
PR: 217883
Submitted by: Kajetan Staszkiewicz
MFC after: 1 week
Sponsored by: InnoGames GmbH
Rules are unlinked in shutdown_pf(), so we must call
pf_unload_vnet_purge(), which frees unlinked rules, after that, not
before.
Reviewed by: eri, bz
Differential Revision: https://reviews.freebsd.org/D10040
When we unload we don't hold the pf_rules_lock, so we cannot call rw_sleep()
with it, because it would release a lock we do not hold. There's no need for the
lock either, so we can just tsleep().
While here also make the same change in pf_purge_thread(), because it explicitly
takes the lock before rw_sleep() and then immediately releases it afterwards.
If the call to pf_state_key_clone() in pf_get_translation() fails (i.e. there's
no more memory for it) it frees skp. This is wrong, because skp is a
pf_state_key **, so we need to free *skp, as is done later in the function.
Getting it wrong means we try to free a stack variable of the calling
pf_test_rule() function, and we panic.
inet_ntoa() cannot be used safely in a multithreaded environment
because it uses a static local buffer. Instead, use inet_ntoa_r()
with a buffer on the caller's stack.
This code had an INET6 conditional before this commit, but opt_inet6.h
was not included, so INET6 was never defined. Apparently, pf's OS
fingerprinting hasn't worked with IPv6 for quite some time.
This commit might fix it, but I didn't test that.
Reviewed by: gnn, kp
MFC after: 2 weeks
Relnotes: yes (if I/someone can test pf OS fingerprinting with IPv6)
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9625
