o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).
Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.
The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.
The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.
KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.
A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.
[1] https://github.com/google/syzkaller
Submitted by: Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by: kib
Testing by: tuexen
Sponsored by: DARPA, AFRL
Sponsored by: The FreeBSD Foundation (Mitchell Horne)
Differential Revision: https://reviews.freebsd.org/D14599
newvers.sh takes upwards of 4-5 seconds to complete on trees checked
out from github, due to searching the entire history for non-existent
git-svn metadata. Similarly, if one does not check out notes, we
again search the entire history for notes. That makes newvers.sh very
slow for many github users.
To fix this in a fair way, limit the history search to the last 10K
commits: if you're more than 10K commits out of sync, then you've
forked the project, and our SVN rev is no longer very important to you.
Due to how git implements --grep in conjunction with -n, --grep has been
removed for performance reasons (git does not seem to limit its search
to the -n limit in this case, and takes just as long as it did with no
limit).
Reviewed by: emaste, imp
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18745
Perforce no longer offers a FreeBSD client and it not a viable VCS for
FreeBSD development. Remove p4 version logic to simplify newvers.sh in
advance of other changes.
Sponsored by: The FreeBSD Foundation
Consider the case where FreeBSD is checked out via Subversion with a
(perhaps unrelated) .git or .hg directory at a higher level - for
example,
.../.git
.../src/freebsd
Previously newvers obtained the SVN revision information via svnversion,
and then tried to obtain the SVN revision corresponding to the git or hg
commit, overwriting the existing information.
As a short term fix use a different variable for hg-svn or git-svn
information, setting $svn from hg or git info only if not empty.
Reported by: Matthias Apitz
Sponsored by: The FreeBSD Foundation
This merge brings in a couple new files, which needed to be attached to the
build; a new dependency on <limits.h>, which must be stubbed; and a name
change in the Context parameter constants, from ZSTD_p_foo to ZSTD_c_foo.
Significantly, it fixes a kernel build error with GCC where floating-point
functions were included in the kernel build, by hiding them under the same
compile-time #ifdef that already covered their invocation. That issue was
introduced to FreeBSD in the 1.3.7 update and tracked upstream here:
https://github.com/facebook/zstd/issues/1386
The full 1.3.8 release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.3.8
Relnotes: yes
This fixes a warning seen when compiling amd64 GENERIC with clang 7.
Also remove the workaround added in r337324. clang 7 and gcc 4.2
generate the same code with or without the code change.
Reviewed by: imp (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18603
It was written basing on:
TCG PC Client Platform TPM Profile (PTP) Specification Version 22, Revision 1.03.
It only supports Locality 0. Interrupts are only supported in FIFO mode.
The driver in FIFO mode was tested on x86 with Infineon SLB9665 discrete TPM chip.
Driver in both modes was also tested on qemu with swtpm running on host.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D18048
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts
Sponsored by: Rubicon Communications, LLC ("Netgate")
The cp110 clock controller controls the clocks and gate of the CP110
hardware block.
Every clock/gate are implemented except the NAND clock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The first two clocks are for the clusters and their frequencies can be
found reading a register. Then a fixed 1200Mhz clock is present and two
fixed clocks, 'mss' which is 1200 / 6 and 'sdio' which is 1200 / 3.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
ACPI SRAT table on arm64 uses GICC entries to provide CPU locality
information. These entries use an AcpiProcessorUid to identify the
CPU (unlike on x86 where the entries have an APIC ID).
Update acpi_pxm.c to extend the cpu_add/cpu_find/cpu_get_info
functions to handle AcpiProcessorUid. Use the updated functions
while parsing ACPI_SRAT_GICC_AFFINITY entry for arm64.
Also update sys/conf/files.arm64 to build acpi_pxm.c when ACPI is
enabled.
Reviewed by: markj (previous version)
Differential Revision: https://reviews.freebsd.org/D17942
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
newvers.sh runs mkfifo which did not exist before this change.
However, I didn't notice before because it is run from a function
where a missing command does cause a noticeable failure.
Reviewed By: emaste, markj
Differential Revision: https://reviews.freebsd.org/D18377
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18214
- Store the clip table in 'struct adapter' instead of in the TOM softc.
- Init the clip table during attach and teardown during detach.
- While here, add a dev.<nexus>.<unit>.misc.clip sysctl to dump the
CLIP table.
This does mean that we update the clip table even if TOE is not enabled,
but non-TOE things need the CLIP table anyway.
Reviewed by: np, Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18010
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18142
HW needs to know which UDP packets should be treated as tunnel
encapsulation to do inner packet recognition, classification and
offloads.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18134
When reproducible build mode is enabled vers.c may be unchanged between
successive builds. In this case avoid changing the file's metadata so
that it does not cause dependent targets to be rebuilt.
Sponsored by: The FreeBSD Foundation
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D17892
