Commit Graph

33848 Commits

Author SHA1 Message Date
Søren Schmidt
9073a41122 Make it compile again.
I have no idea if the new stuff works though.

Broken by: Julian
1998-12-19 19:05:57 +00:00
Poul-Henning Kamp
3d7b283155 Add "fla" to Disk_Names() 1998-12-19 18:48:33 +00:00
Bruce Evans
3bc124d470 Wait for channel commands to complete after issuing the commands.
The optimisation of only waiting before issuing new commands is
obviously invalid in general and it caused many errors in NIST-PCTS.
I think the errors were mostly for characters sent with the wrong
parity, etc., after a half complete tcsetattr().

Use microtime() instead of a magic loop count to limit the wait.
The wait is a busy-wait :-( and normally takes about 500 usec.
1998-12-19 16:28:57 +00:00
Foxfair Hu
dc0ba36f4d Add more non-Intel family ((new)) chipset, just like VIA technology MVP3
AcerLabs Aladdin-V. It makes the PCI probing work when system booting. I
will try to merge some additional funtion(i.e. wdc1 problem cause tons of
PR appear :<) ASAP if I could.

Remind me if something wrong after committing, thanks!
1998-12-19 16:05:19 +00:00
Matthew Dillon
2eaf205864 Commit initial man page for 'security'... an introduction to security
mechanisms.  It is a little light on detail but still a pretty good
    overview.  I suggest that for specific detail (such as, for example,
    how to setup kerberos), that additional security-DETAILNAME man pages
    be written and refered to.
1998-12-19 09:33:03 +00:00
Julian Elischer
57b59a8762 Remove the bogus charracters "42" from the beginning of the first line.
looks like "editor turd".
1998-12-19 08:35:30 +00:00
Julian Elischer
39fb8e6b3e Fix two bogons created by 'patch(1)' in my last commit. 1998-12-19 08:23:31 +00:00
Matthew Dillon
eb127873d5 Take bind out of sandbox and run it as root again, but leave support
mechanisms ('bind' user and group) in place so the feature can be easily
    turned on.  There were too many complaints.  The security(1) man
    page will be created/updated to include the appropriate info.
1998-12-19 07:25:56 +00:00
Bill Paul
368a6b0214 Trim the ethernet CRC from received frames manually in wb_rxeof().
The Winbond chip always includes the CRC with every received frame,
and I can't find anything in the Winbond manual that indicates you can
program it not to do this.
1998-12-19 04:19:44 +00:00
Mike Smith
6417da252f Fix for bogus BIOS configuration of the 450NX PCI interface on some
systems (eg. Dell 6300).

PR:		kern/8928
Submitted by:	David Malone <dwmalone@maths.tcd.ie>
1998-12-19 02:58:29 +00:00
Julian Elischer
6626c6045c Reviewed by: Luoqi Chen, Jordan Hubbard
Submitted by:	 "Richard Seaman, Jr." <lists@tar.com>
Obtained from:	linux :-)

Code to allow Linux Threads to run under FreeBSD.

By default not enabled
This code is dependent on the conditional
COMPAT_LINUX_THREADS (suggested by Garret)
This is not yet a 'real' option but will be within some number of hours.
1998-12-19 02:55:34 +00:00
Mike Smith
02489dd737 Support for Intel 450NX-based systems with more than one PCI bus (ie.
most of them).

Many thanks to Kevin Van Maren for the work here, Intel for lending us
a 450NX system to work this out on, and several other folks for testing
the patches.  See the PR for an extensive discussion of the nature of
the problem and resolution.

PR:		kern/8928
Submitted by:	Kevin Van Maren <vanmaren@fast.cs.utah.edu>
1998-12-19 02:51:22 +00:00
Dmitrij Tejblum
80bea3fbbd Make <sys/dirent.h> and <dirent.h> self-sufficient, using new __intN_t types. 1998-12-19 00:30:01 +00:00
Dmitrij Tejblum
68626e8df3 Install <sys/inttypes.h> as <inttypes.h>. 1998-12-19 00:21:13 +00:00
Dmitrij Tejblum
8252a465b9 Little reorganization:
- created internal names for fixed-size integral types, like __int32_t. They
  will be used to make several headers self-sufficient.
- <stdlib.h> don't include <machine/types.h> anymore.
- created <sys/inttypes.h>, which can be used as <inttypes.h>.
- declaration of uoff_t and ufs_daddr_t moved to <sys/types.h>.

Reviewed by:	bde
1998-12-19 00:02:34 +00:00
Bill Paul
f52393a257 Correct the definition for PN_NETCFG_NO_RXCRC: it's 0x20000000, not
0x02000000. This error was causing the chip to always include the
ethernet CRC along with every received frame (the driver turns on
PN_NETCFG_NO_RXCRC, but it was frobbing the wrong bit).
1998-12-18 18:31:34 +00:00
Matt Jacob
5091642944 Made changes suggested by bruce, plus a couple of others which made -Wall work.
Obtained from:bde@freebsd.org
1998-12-18 18:16:35 +00:00
Bruce Evans
ead8747a8c Removed unused (slightly wrong) stub functions.
Fixed some staticization obfuscations.
1998-12-18 18:07:10 +00:00
Dag-Erling Smørgrav
d941fd2df9 Don't specify a language to compile_et.
Rename fetchConnect to _fetch_connect since it's internal.
1998-12-18 14:32:48 +00:00
Dag-Erling Smørgrav
d63c42d19f Unbreak K&R support, and generate code that works in K&R C as well as
ANSI C no matter what language is specified.
1998-12-18 14:29:51 +00:00
Satoshi Asami
3a5dbbd324 Add share/emacs/site-lisp. Too many things break without it.
Reviewed by:	ports list (a long time ago)
1998-12-18 08:06:34 +00:00
Jordan K. Hubbard
2f33209270 Now that textproc/docproj works properly, use it instead of the long
list of ports.
1998-12-18 05:13:01 +00:00
Matt Jacob
b5c6d4c555 Add in block position/block locate functions. 1998-12-18 04:31:43 +00:00
Matt Jacob
d902101e8e Add structures and function definitions pertinent for hardware locate support. 1998-12-18 04:29:16 +00:00
Joseph Koshy
c83e7c5041 Add references to test(1) and expr(1). 1998-12-18 03:51:18 +00:00
Joseph Koshy
e5bf7bf46c Add cross-references to test(1) and expr(1) respectively.
PR: 		docs/9111
Submitted by:	Josh Gilliam <josh@quick.net>
1998-12-18 03:16:47 +00:00
Joseph Koshy
c228bdde6f Fix spelling nits.
PR:		docs/9115
Submitted by:	Kris Kennaway <kkennawa@physics.adelaide.edu.au>
1998-12-18 03:08:57 +00:00
Matt Jacob
69765472a3 1) Clarify that a weof count of zero is allowed (flush buffers).
2) Add in the set of {sethpos,setspos,rdhpos,rdspos) commands to implement the
Hardware && SCSI Logical Block position ioctls.
1998-12-18 02:02:20 +00:00
Doug Rabson
12e25f330b Enable building libio on the alpha. 1998-12-17 23:02:11 +00:00
Doug Rabson
65be2aace6 Move some compile flags from the kernel makefile to bsd.kern.mk so that
kernel modules are built with the right flags.

Suggested by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-12-17 22:36:21 +00:00
Justin T. Gibbs
2e66665367 Correct the definition of the changer device capabilities page. The
previous definition confused some reserved bytes for exchange capabilities.
1998-12-17 22:26:39 +00:00
Matt Jacob
e12cfd3c79 import logical/hardware block locate ioctls from NetBSD 1998-12-17 19:26:49 +00:00
Bruce Evans
747c608e8d Flush the tx fifo in cystop(). Now ttyflush() (and thus tcflush(3))
almost works properly.  Unfortunately, there is no way to flush
the rx fifo without resetting the channel, which also flushes the
tx fifo.  We avoid resetting even when both fifos need to be flushed,
since resetting seems to cause the rx to lose sync if it is done
while data is arriving.

Reminded by:	NIST-PCTS
1998-12-17 19:23:09 +00:00
Matt Jacob
303826838c Add some tape specific density codes- only enough of them here to recognize
some specific older units so we can choose 2FM@EOD or FIXED blocksize
quirks.
1998-12-17 19:04:18 +00:00
Matt Jacob
888bec0f0c Several changes having to do blocksize- mostly to force variable as the default.
Attempt to determine (at mount time if not done so already) via density code
whether a device should default to fixed mode or not. Attempts to set to
variable that fail will cause fixed to be selected.

Similarly, the '2 filemarks at EOM' quirk is now determined (or attempted to
be determined) via density code. Some as yet not entirely tested code for
coping with 2FM@EOD position is now also in place.
1998-12-17 18:56:23 +00:00
Bruce Evans
f9828cced4 Fixed handling of BREAK in input. BREAK was not being converted into an
escape sequence in the `-ignbrk -brkint parmrk' case.

Found by:	NIST-PCTS
1998-12-17 18:43:08 +00:00
Bruce Evans
7cfc9b133e Oops, this should have been in the previous commit (ensure atomic update
of com->cor[1]).
1998-12-17 18:18:06 +00:00
Bruce Evans
657365cdd7 Implemented sending of BREAKs. This is quite complicated because the
hardware is interrupt-driven to a fault and sending a BREAK requires
mode switching.  Always running in the BREAK-capable mode as in PR 8318
would double the overhead for sending \0's.

Reminded by:	PR 8318
1998-12-17 17:40:13 +00:00
Eivind Eklund
70efdda93d Note that dying on NULL is an implementation detail. 1998-12-17 17:13:47 +00:00
Jordan K. Hubbard
efba76d7ff Look for boot blocks in new default location. 1998-12-17 16:50:10 +00:00
Eivind Eklund
630dc76f4e Restore old semantics (broken in rev 1.47's buffer overflow fix). 1998-12-17 16:31:02 +00:00
Martin Cracauer
36cabb9282 Actually document my last addition.
General cosmetics.
Add a note that scsi-defects has not been ported to CAM.
Submitted by:	BDE
1998-12-17 12:21:20 +00:00
Dag-Erling Smørgrav
ae94be3fb1 Add an option for insecure mode, in which rwhod does not discard packets
from incorrect source ports.
1998-12-17 11:05:57 +00:00
KATO Takenori
57276bc0d3 Sync with sys/i386/isa/clock.c revision 1.129. 1998-12-17 08:54:47 +00:00
KATO Takenori
2da7825a28 The fe driver has been merged into sys/i386/isa/if_fe.c.
Forgotten by:	kato
1998-12-17 08:45:07 +00:00
KATO Takenori
73711314e2 Sync with sys/i386/isa/wd.c revision 1.181. 1998-12-17 08:42:10 +00:00
KATO Takenori
7e2b44203e Sync with sys/i386/isa/npx.c revision 1.64. 1998-12-17 08:41:34 +00:00
KATO Takenori
012291989b Sync with sys/i386/isa/fd.c revision 1.129. 1998-12-17 08:40:36 +00:00
Brian Somers
2ff64793ad Don't return stack-based data. This may have caused
server-side CHAP authentication problems in the past :-/
1998-12-17 00:28:12 +00:00
Justin T. Gibbs
0378c40c5c Fix a few problems with handling rejected transfer negotiation messages.
Use the host message loop for any unknown message types instead of performing
a reject message in the sequencer.  Pass reject messages to the host
message loop too which frees up a sequencer interrupt type slot.

Default to issuing a bus reset if initiator mode is enabled.  It seems
that the reset scsi bus bit is not defined in the same location for
all aic78xx BIOSes, so attempting to honor this setting will have to
wait until I get more information on how to detect it.

Nuke some unused variables.
1998-12-17 00:06:52 +00:00