Allow drivers to query the "upstream PCI bridge".
Currently we point back to ourselves on pdev->bus->self rather than
to the parent PCI bridge.
We keep this as status-quo with an extra comment and only on-demand
allocate a pci_dev for the parent bridge if we are asked for in
pci_upstream_bridge().
When releasing the pci_dev we check if pdev->bus->self has changed
and call pci_dev_put() to release the reference count on the parent
bridge as well.
This code moves pci_is_root_bus() higher up in pci.h but no functional
change there.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: hselasky, (jhb some earlier)
Thanks to: wulf for handling drm-kmod
Differential Revision: https://reviews.freebsd.org/D34305
cpu ticks) has some imprecision and, worse, huge timestep (about
20 minutes on 4GHz CPU) near 53.4 days of elapsed time.
kern_time.c/cputick2timespec() (it is used for clock_gettime() for
querying process or thread consumed cpu time) Uses cputick2usec()
and then needlessly converting usec to nsec, obviously losing
precision even with fixed cputick2usec().
kern_time.c/kern_clock_getres() uses some weird (anyway wrong)
formula for getting cputick resolution.
PR: 262215
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D34558
This is used to calculate sizes that are then stored in unsigned long
fields. Make this unsigned long so the calculations use this type and
not an int that can lead to an integer overflow with a large PAGE_SIZE.
This allows building this on arm64 with PAGE_SIZE of 16k. Further work
will be needed if a 32-bit architecture tries to use a similar sized
page.
Sponsored by: The FreeBSD Foundation
The timestamp logs are quite large (often much larger than all the
other sysctls combined) so it's unlikely anyone will want to have
them displayed by `sysctl -a`.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34616
ISA sound cards (and ISA itself) are long obsolete. NYCBUG dmesgd has
no entries for any of these devices after 2005.
Add deprecation notices to device attach routines and man pages for:
snd_ad1816 Analog Devices AD1816 SoundPort
snd_ess Ensoniq ESS
snd_gusc Gravis UltraSound
snd_mss Microsoft Sound System
snd_sbc Creative Sound Blaster
Reviewed by: cy, mav
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34604
Can be used when the fs at hand can synchronize insmntque with other
means than the vnode lock.
Reviewed by: markj
Tested by: pho (previous version)
Differential Revision: https://reviews.freebsd.org/D34466
This was already declared in psci.h, but it was never defined/set. Do
this now, so we can use it to decide if enable-method in /cpus FDT nodes
should be inspected later on. While we're here, convert it to a
boolean.
Reviewed by: andrew (slightly earlier version)
Differential Revision: https://reviews.freebsd.org/D34553
The ITS is defined to be disabled on a warm reset, but we may be coming
in via another kernel/hypervisor type setup where the ITS has been
previously configured then relinquished to the next kernel in the chain.
If it's enabled, the later configuration of GITS_BASER will almost
certainly fail -- clear it to prevent that.
Reviewed by: andrew
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34546
This driver was not finished when it was committed in 1999 and was never
connected to the build.
A version of the driver used to be available in ports as
audio/aureal-kmod, but it has been removed. It did not build on FreeBSD
10.x or later and the binary objects it required were not available
after Google Code disappeared.
PR: 124343
Reported by: joel
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When working with a vendor to debug their kernel module,
I found that a non-tied kld which uses NDINIT will panic
due to "namei: bad debugflags " on a kernel compiled with
INVARIANTS because non-tied KLDs do not pick up the
initialization that is done in NDINIT_DBG/NDREINIT_DBG().
Fix this by making this initialization happen for non-KLD_TIED
as well as INVARIANTS
Reviewed by: mjg
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34588
Introduce a helper to fetch the TSC frequency from CPUID when running
under Xen.
Since the TSC can also be initialized early when running as a Xen
guest pull out the call to tsc_init() from the
early_clock_source_init() handlers and place it in clock_init(), as
otherwise all handlers would call tsc_init() anyway.
Reviewed by: markj
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D34581
For Framework laptops built after Oct 2021 (like mine) that have a Tempo
Semiconductor 92HD95B codec rather than Realtek ALC295 (see
https://frame.work/ca/en/blog/solving-for-silicon-shortages).
As we do for many other laptops, put the headphone jack and speakers in
the same association by default so that the generic sound device
automatically switches between them. Also specify the jack colour and
location.
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34596
- Avoid looping forever if a concurrent reset causes a read of the
interrupt status register to return all ones.
- Lock the softc before reading the interrupt status, so as to avoid a
similar infinite loop in hdac_one_intr().
This fixes suspend-to-S3 on some laptops.
PR: 261207
Reviewed by: mav, imp
Tested by: uqs
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34117
Use a spinlock section instead of a critical section to synchronize with
statclock(). Otherwise the CLOCK_THREAD_CPUTIME_ID clock can appear to
go backwards.
PR: 262273
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34568
Some loops access the fd table of a different process, and drop the
filedesc lock while iterating, so they check the table's refcount.
However, we access the table before the first iteration, in order to get
the number of table entries, and this access can be a use-after-free.
Fix the problem by checking the refcount before we start iterating.
Reported by: pho
Reviewed by: mjg
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34575
A NFSv4.1/4.2 pNFS mount needs to do a
separate Open+LayoutGet RPC, so do not do
a Lookup+Open RPC for these mounts.
The Lookup+Open RPCs are still disabled,
until further testing is done, so this patch
has no effect at this time.
There's too many broken hardware out there that wrongly has the
ACPI_FADT_NO_VGA bit set. Ignore it unless running as a virtualized
guest, as then the expectation would be that the hypervisor does
provide correct ACPI tables.
Reviewed by: emaste, 0mp, eugen
MFC: 3 days
Sponsored by: Citrix Systems R&D
PR: 230172
Differential revision: https://reviews.freebsd.org/D34392
66acf7685b failed to build on riscv (and mips). This is because the
atomic_testandset_int() (and friends) functions do not exist there.
Happily those platforms do have the long variant, so switch to that.
PR: 262571
MFC after: 3 days
Commit 0455cc7104 broke snapshotting for ffs. In that commit,
ffs_mount() was changed so the namei() lookup for a disk device happens
before ffs_snapshot(). This caused the issue where namei() would lookup
the snapshot file and fail because the file doesn't exist. Even if it did
exist, taking a snapshot would still fail since it's not a disk device.
Fix this by taking a snapshot of the filesystem as-is and return without
altering ro/rw or any other attributes that are passed in.
Reported by: pho
Reviewed by: mckusick
Fixes: 0455cc7104 ("ffs_mount(): return early if namei() fails to lookup disk device")
Differential Revision: https://reviews.freebsd.org/D34562
As an unwanted side effect of the performance improvements in
24f0bfbad5, epair interfaces stop forwarding traffic on higher
load levels when running on multi-core systems.
This happens due to a race condition in the logic that decides when to
place work in the task queue(s) responsible for processing the content
of ring buffers.
In order to fix this, a field named state is added to the epair_queue
structure. This field is used by the affected functions to signal each
other that something happened in the underlying ring buffers that might
require work to be scheduled in task queue(s), replacing the existing
logic, which relied on checking if ring buffers are empty or not.
epair_menq() does:
- set BIT_MBUF_QUEUED
- queue mbuf
- if testandset BIT_QUEUE_TASK:
enqueue task
epair_tx_start_deferred() does:
- swap ring buffers
- process mbufs
- clear BIT_QUEUE_TASK
- if testandclear BIT_MBUF_QUEUED
enqueue task
PR: 262571
Reported by: Johan Hendriks <joh.hendriks@gmail.com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34569
This codec is found in recent versions of the Framework laptop. Tempo
Semiconductor acquired these products from IDT's Audio Business Unit.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The total size of the user-provided nmreq was first computed and then
trusted during the copyin. This might lead to kernel memory corruption
and escape from jails/containers.
Reported by: Lucas Leong (@_wmliang_) of Trend Micro Zero Day Initiative
Security: CVE-2022-23084
MFC after: 3 days
An unsanitized field in an option could be abused, causing an integer
overflow followed by kernel memory corruption. This might be used
to escape jails/containers.
Reported by: Reno Robert and Lucas Leong (@_wmliang_) of Trend Micro
Zero Day Initiative
Security: CVE-2022-23085
FreeBSD 13+ running as virtual guest may load virtio_random(8) driver
by means of devd(8) unless the driver is blacklisted or disabled
via device.hints(5). Currently, the driver may prevent
the system from rebooting or shutting down correctly.
This change deactivates virtio_random at very late stage
during system shutdown sequence to avoid deadlock
that results in kernel hang.
PR: 253175
Tested by: tom
MFC after: 3 days
Summary:
We really should be checking the return value of
ofw_gpiobus_parse_gpios_impl, not the value of sc_pins, which isn't
changed on failure.
Reported by: alfredo@
Reviewers: #powerpc, alfredo
Reviewed By: #powerpc, alfredo
Subscribers: imp, loos
Differential Revision: https://reviews.freebsd.org/D34571
When using 16k or 64k pages atop will shift the address by more than
the needed amount for a tlbi instruction. Replace this with a new macro
to shift the address by 12 and use PAGE_SIZE in the for loop to let the
code work with any page size.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34516
Adding it in order to make easier using powerpcspe images under qemu
Reviewed by: jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D34554
To allow for a future 16k or 64k page size we need to tell libkvm which
is being used. Add a flag field in unused space in minidumphdr and use
it to signal between the different options.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34548
When moving from the l1 index to l0 index we need to use the l1 shift
value not the l0 shift value. With 4k pages they are identical, however
with 16k pages we only have 2 l0 entries so the shift value is incorrect.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34517
Currently RSC offloading is enabled by default.
With this new change rsc will be disabled by default.
By using sysctl we can enable and disable it.
Reviewed by: whu
Signed-off-by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Fixes: a491581f3f Enable vSwitch RSC support in hn netvsc driver
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D34507
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
Use nanotime instread of binuptime.
This change is for old and legacy platforms and does not impact any armv7 and later.
Might be MFCed to 13.0 once armv6 support is finally dropped in 14.0
Sponsored by: Stormshield
Reviewed by: mw
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D33719
Use of the Lookup+Open RPC is currently disabled,
due to a problem detected during testing. This
patch fixes this problem. The problem was that
nfscl_postop_attr() does not parse the attributes
if nd_repstat != 0. It also would parse the
return status for the operation, where the
Lookup+Open code had already parsed it.
The first change in the patch does not make any
semantics change, but makes the code identical
to what is done later in the function, so that
it is apparent that the semantics should be the
same in both places.
Lookup+Open remains disabled while further
testing is being done, so this patch has no
effect at this time.
Traditionally the GEOM's primary channel of information from kernel to
user-space was confxml, fetched by libgeom through kern.geom.confxml
sysctl. It is convenient and informative, representing full state of
GEOM in a single XML document. But problems start to arise on systems
with hundreds of disks, where the full confxml size reaches many
megabytes, taking significant time to first write it and then parse.
This patch introduces alternative solution, allowing to fetch much
smaller XML document, subset of the full confxml, limited to 64KB and
representing only one specified geom and optionally its parents. It
uses existing GEOM control interface, extended with new "getxml" verb.
In case of any error, such as the buffer overflow, it just transparently
falls back to traditional full confxml. This patch uses the new API in
user-space GEOM tools where it is possible.
Reviewed by: imp
MFC after: 2 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D34529
The console escape code standard (ECMA-48) specifies color #3 (escape
code 33) as yellow. A brown console color is an artifact of the VGA
palette, which replaces dim (but not bright) yellow with brown.
Reviewed by: adrian, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34531
clang fails to take advantage of the fact that majority of the struct
gets written to in the routine and decides to bzero the entire thing.
Explicitly zero padding and spare fields, relying on KMSAN to catch
problems should anything pop up later which also needs explicit
zeroing.
fstat on tmpfs (ops/s):
before: 8216636
after: 8508033
Support the "usr" and "os" qualifiers on arm64 events to restrict
event counting to either usermode or the kernel, respectively. If
neither qualifier is given, events are counted in both.
Reviewed by: emaste
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34527
- Add icl_pdu_append_bio and icl_pdu_get_bio methods.
- Add new page pod routines for allocating and writing page pods for
unmapped bio requests. Use these new routines for setting up DDP
for iSCSI tasks with a SCSI I/O CCB which uses CAM_DATA_BIO.
- When ICL_NOCOPY is used to append data from an unmapped I/O request
to a PDU, construct unmapped mbufs from the relevant pages backing
the struct bio. This also requires changes in the t4_push_pdus path
to support unmapped mbufs.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34383
- Add icl_pdu_append_bio and icl_pdu_get_bio methods.
- When ICL_NOCOPY is used to append data from an unmapped I/O request
to a PDU, construct unmapped mbufs from the relevant pages backing
the struct bio.
- Use m_apply with a helper to compute crc32 digests on mbuf chains
to handle unmapped mbufs. Since m_apply requires PMAP_HAS_DMAP
for unmapped mbufs, only support unmapped requests when PMAP_HAS_DMAP
is true.
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D34406
Don't assume that csio->data_ptr is pointer to a data buffer that can
be passed to icl_get_pdu_data and icl_append_data. For unmapped I/O
requests, csio->data_ptr is instead a pointer to a struct bio as
indicated by CAM_DATA_BIO. To support these requests, add
icl_pdu_append_bio and icl_pdu_get_bio methods which pass a pointer to
the bio and an offset and length relative to the bio's buffer.
Note that only backends supporting unmapped requests need to implement
these hooks.
Implement simple no-op hooks for the iser backend.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34382
The associated csio ccb will not be completed via xpt_done() until
after the associated PDUs are transmitted to the other side and either
the original PDU is acked with a SCSI response, or a response is
received for a subsequent abort CCB (which means the earlier PDU has
also been sent since it would have been sent before the abort PDU).
This does assume that once an I/O request has been aborted, no further
PDUs with data payload are queued for that I/O request.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34405
In particular, use a generic wrapper around struct regset rather than
requiring per-regset helpers. This helper replaces the MI
__elfN(note_prstatus) and __elfN(note_fpregset) helpers. It also
removes the need to explicitly dump NT_ARM_ADDR_MASK in the arm64
__elfN(dump_thread).
Reviewed by: markj, emaste
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34446
To handle the different register layouts for different versions, add a
GIC_DB_SHOW() method. Currently this hook is only implemented for
versions 1 and 2.
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34415
When creating the DMAP region we may need to create level 2 page table
entries at the start and end of a block of memory. The code to do this
was almost identical so we can merge into a single function.
Sponsored by: The FreeBSD Foundation
Newly allocated counters are guaranteed to be 0.
This removes 5 IPIs for each loaded rule.
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Some PCI devices especially GPUs require a ROM to work properly.
The ROM is executed by boot firmware to initialize the device.
To add a ROM to a device use the new ROM option for passthru device
(e.g. -s passthru,0/2/0,rom=<path>/<to>/<rom>).
It's necessary that the ROM is executed by the boot firmware.
It won't be executed by any OS.
Additionally, the boot firmware should be configured to execute the
ROM file.
For that reason, it's only possible to use a ROM when using
OVMF with enabled bus enumeration.
Differential Revision: https://reviews.freebsd.org/D33129
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 month
In order to support various types of data stored in device
tree properties or ACPI _DSD packages, create a new enum so
the caller can specify the expected type of a property they
want to read, according to the binding. The bus logic will use
that information to process the underlying data.
For example in DT all integer properties are stored in BE format.
In order to get constant results across different platforms we
need to convert its endianness to match the host.
Another example are ACPI_TYPE_INTEGER properties stored
as uint64_t. Before this patch the ACPI logic would refuse
to read them if the provided buffer was smaller than 8 bytes.
Now this can be handled by using DEVICE_PROP_UINT32 type.
Modify the existing consumers of this API to reflect the changes
and update the man pages accordingly.
Reviewed by: mw
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33457
There are multiple buses that pretend to be ofw compatible,
e.g ofw_pci, mii_fdt. We now need to provide an implementation
of BUS_GET_PROPERTY for every one of them. Instead of modifying
them one by one it's better to just provide a default
implementation that simply traverses up the device tree.
Remove the now unneeded BUS_GET_PROPERTY implementation in mii_fdt.
Reviewed by: andrew, bz
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34031
They are in a different order to the TCR_TG1 values but appear to have
been copied incorrectly.
While here use TCR_TG0_4K in locore.S to make it explicit the userspace
page size is 4K.
Sponsored by: The FreeBSD Foundation
We assume EFI_PAGE_SIZE is the same as PAGE_SIZE, however this may not
be the case. Use the former when working with a list of pages from the
UEFI firmware so the correct size is used.
This will be needed on arm64 where PAGE_SIZE could be 16k or 64k in the
future. The other architectures have been updated to be consistent.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34510
The Fsinfo RPC is exempt from the check for
Kerberized NFS being required, as recommended
by RFC2623. However, there is no reason to
exempt Fsinfo from the requirement to use TLS.
This patch fixes the code so that the exemption
only applies to Kerberized NFS and not
NFS-over-TLS.
This only affects NFS-over-TLS for an NFSv3
mount when it is required, but the client does
not do so.
MFC after: 1 month
Newly added features & bug fixes
o Fixed an issue smartpqi debug log messages are flooding kernel logs.
o Fixed an issue where devices are shown as RAID 0 in display info.
o Feature: Changed 32 bit dma address to 64 bit address
o Added new controlller ids.
Submitted by: Microsemi
Reviewed by: Scott Benesh (Microsemi), imp
Differential Revision: https://reviews.freebsd.org/D34469
MFC After: 3 days
Sponsored by: Netflix
This should fix an issue where the "udev->re_enumerate_wait" field never gets
processed and reset. In this case usbconfig will wait forever and never return.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Notable upstream pull request merges:
#9078: log xattr=sa create/remove/update to ZIL
#11919: Cross-platform xattr user namespace compatibility
#13014: Report dnodes with faulty bonuslen
#13016: FreeBSD: Fix zvol_cdev_open locking
#13019: spl: Don't check FreeBSD rwlocks for double initialization
#13027: Fix clearing set-uid and set-gid bits on a file when
replying a write
#13031: Add enumerated vdev names to 'zpool iostat -v' and
'zpool list -v'
#13074: Enable encrypted raw sending to pools with greater ashift
#13076: Receive checks should allow unencrypted child datasets
#13098: Avoid dirtying the final TXGs when exporting a pool
#13172: Fix ENOSPC when unlinking multiple files from full pool
Obtained from: OpenZFS
OpenZFS commit: a86e089415
We assume the pointer returned from get_pcpu will be consistent even
if the thread is moved to a new CPU. Fix this by partially reverting
63c858a04d to make get_pcpu a function again.
Sponsored by: The FreeBSD Foundation
The arm64 unknown exception will be raised when we execute an
instruction that id invalid or disabled. To help debug these print
the instruction that failed.
Sponsored by: The FreeBSD Foundation
With soft updates enabled, an INVARIANTS panic is hit in ffs_unmount().
The problem occurs in ffs_mount() when upgrading a mount from ro->rw.
During a mount update, the soft update code gets set up but doesn't get
cleaned up if namei() fails when looking up the disk device.
Avoid this scenario by looking up the disk device first and bail early
if the namei() lookup fails.
PR: 256511
MFC After: 2 weeks
Reviewed by: mckusick, kib
Differential Revision: https://reviews.freebsd.org/D30870
This reverts commit 7d8700bc29.
Reason for revert: the patch is incomplete. 64-bit operation
is supported fully in SDHCI v4.0, v3.0 does it only for ADMA mode.
This differentiation is missing and should be taken into consideration
in case the reverted code is re-introduced.
Reported by: mmel
It appears to have introduced a regression on arm64, possibly due to the
fact that the pcpu pointer is reloaded outside of the critical section
in _rm_rlock(). Until this is resolved one way or another, let's
revert.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Sponsored by: The FreeBSD Foundation
ctfdump handles v2 and v3. ctfconvert now emits only CTFv3, whereas
ctfmerge can merge v2 and v3 containers into v3 containers.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34364
The general aim in this and subsequent patches is to minimize the
amount of code that directly references CTF types such as ctf_type_t,
ctf_array_t, etc. To that end, introduce some routines similar to the
existing fbt_get_ctt_size() (which exists to deal with differences
between v1 and v2) and change ctf_lookup_by_id() to return a void
pointer.
Support for v2 containers is preserved.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34361
These are based on definitions added to binutils' libctf. Specifically:
- Type IDs are now encoded in 32 bits rather than 16, changing the
layout of ctf_type_t, ctf_array_t, ctf_member_t and ctf_lmember_t.
- Type info is encoded in 32 bits rather than 16. The type "kind" is
extended from 5 bits to 6, and the type "vlen" is extended from 10
bits to 25.
The main upside is that we remove the current limit, imposed by CTFv2,
of 2^{15} distinct types in the main kernel executable. Other limits,
such as that on the number of elements in an enum, imposed by the vlen
limit, are also raised.
This change adds v2 and v3 flavours of macros and type definitions which
differ between the two versions. Compatibility is preserved for now by
having generic names refer to the v2 definitions, so, e.g., ctf_type_t
is still a v2 type.
No functional change intended.
Reviewed by: Domagoj Stolfa
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34360
Use sys/ctf.h to provide various definitions required to parse the CTF
header. No functional change intended.
Reviewed by: Domagoj Stolfa, emaste
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34359
Use it instead of the existing ctf.h from OpenSolaris. This makes it
easier to use CTF in the core kernel, and to extend the CTF format to
support wider type IDs.
The imported ctf.h is modified to depend only on _types.h, and also to
provide macros which use the "parent" bit of a type ID to refer to types
in a parent CTF container.
No functional change intended.
Reviewed by: Domagoj Stolfa, emaste
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34358
To help with switching to a vdso sigtramp switch to passing through the
sigcode function when entering a signal. This ensures the return address
is within the function.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33690
The new dev.netmap.max_bridges sysctl tunable can be set in
loader.conf(5) to change the default maximum number of VALE
switches that can be created. Current defaults is 8.
MFC after: 2 weeks
Symptom: when a single extmem memory region is provided to netmap
multiple times, for multiple interfaces, the memory region is
never released by netmap once all the existing file descriptors
are closed.
Fix the relevant condition in netmap_mem_drop(): release the memory
when the last user of netmap_adapter is gone, rather then when
the last user of netmap_mem_d is gone.
MFC after: 2 weeks
Despite the buffer taken from cache or free list, it still can be
locked, due to 'lockless lookup' in getblkx() potentially operating on
the freed buffers. The lock is transient, but prevents the use of
LK_NOWAIT there for the goal of neutralizing WITNESS.
Just use LK_NOWITNESS.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Full CCB header overwrites made frees go into wrong zones, causing
kernel panics. Instead of copying full header use xpt_setup_ccb(),
since the only field I see used from all the header is target_id.
PR: 262263
If we can't determine the TSC frequency using CPU registers, we need to
give a chance for Hyper-V drivers to register a timecounter (during
SI_SUB_HYPERVISOR) since an emulated 8254 might not be available.
Thus, split probe_tsc_freq() into early and late stages, and wait until
the latter to attempt calibration using a reference clock.
Fixes: 84369dd523 ("x86: Probe the TSC frequency earlier")
Reported and tested by: khng, Shawn Webb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34444
As in commit c3d830cf7c, we should finalize CPU identification before
probing the TSC frequency.
Fixes: 84369dd523 ("x86: Probe the TSC frequency earlier")
Reported by: khng
The previous commit (56429daea2) that updated the driver included a
bug where a variable was undefined when ALTQ was enabled; this fixes
that issue to declare the missing variable. This wasn't caught before
because we don't use ALTQ, and so it fell on the Jenkins CI's LINT
builds to catch it.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reported by: Jenkins CI
MFC after: 3 days
MFC with: 56429daea2
Sponsored by: Intel Corporation
This change enables the user to control 2.5G and 5G autonegotiation
speeds via advertise_speed sysctl for X550T devices. Due to reported
interoperability issues with switches, 2.5G and 5G speeds will not be
advertised by default.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Co-authored-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Tested by: gowtham.kumar.ks@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D26245
This patch adds checks of a VF link state provided by PF via mailbox
API. Such change enables the PF to disable a VF administratively.
Since command needed by the PF to control the VF is introduced in
mailbox api version 1.2, this patch also bumps supported mailbox api
version to 1.2.
Co-authored-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed By: kbowling@
Tested by: lukasz.szczepaniak@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D32004
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
Summary:
Some targets are not responding to the FLOGI in point-to-point topology,
If the pt2pt discovery is done, Ignore the FLOGI failure.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34422
This code was not touched when all other user-space sleep functions were
switched to sbintime_t and decoupled from hardclock. When it is possible,
convert supplied times into sbinuptime to supply directly to msleep_sbt()
with C_ABSOLUTE. This provides the timeout resolution of few microseconds
instead of 2 milliseconds, plus avoids few clock reads and conversions.
Reviewed by: vangyzen
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D34163
This reduces the size of diffs required to support different values of
vnsz2log. In CheriBSD, kernels for CHERI architectures have vnodes
larger than 512 bytes and require a value of 9.
Reviewed by: mjg
Obtained from: CheriBSD
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34418
Implement MODULE_PNP_INFO() support in LinuxKPI for the Linux
MODULE_DEVICE_TABLE.
This will allow us to auto-load LinuxKPI PCI drivers (drm-kmod do
not currently as they attach to vgapci0 which in turn grabs the PCI
to my understanding) and make any loading from loader or kld_list in
rc.conf unnecessary; see devmatch(8) for more information.
We need to ensure there is a DRIVER_MODULE() (or probably just
a DECLARE_MODULE but that makes not much difference) before the
MODULE_PNP_INFO (which we otherwise would not need).
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: imp, hselasky, manu
Differential Revision: https://reviews.freebsd.org/D26651
Rather than having LinuxKPI return BUS_PROBE_DEFAULT, return
"one less" so that on conflict of IDs others would be preferred.
This means that iwm(4) will attach instead of iwlwifi(4) for the
chipsets iwm(4) supports and iwlwifi(4) only for the other--in iwm(4)
unsupported--chipsets. This is done so that we can enable auto-loading
of drivers but for the upcoming 13.1-Release people with working iwm(4)
will not yet be affected by iwlwifi(4).
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Add bsd_probe_return which a driver can set in their 'struct pci_driver'
definition to set a driver-sepcific LinuxKPI pci return value.
This is helpful in case of multiple drivers with overlapping IDs,
such as iwlwifi(4) and iwm(4).
Contrary to an earlier version we now assume 0 is not BUS_PROBE_SPECIFIC
(which no driver should really return these days) but the bss initialized
value (bsd_probe_return unset) and we will return BUS_PROBE_DEFAULT.
Suggested by: jhb
Reviewed by: jhb
Reviewed by: hselasky, imp (earlier versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-MFC: new struct members need to go to the end for stable/13
Differential Revision: https://reviews.freebsd.org/D33915
