where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
datagrams to any value, to improve performance. The behaviour is
controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.
Differential Revision: https://reviews.freebsd.org/D2177
Reviewed by: adrian, cy, rpaulo
Tested by: Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Relnotes: yes
- bus_dmamap_create() does not take the BUS_DMA_NOWAIT flag
- properly unload maps
- do not assign NULL to dma map pointers
Submitted by: Konstantin Belousov <kostikbel@gmail.com>
Approved by: jfv (mentor)
MFC after: 1 week
Both .weak and .alias assembler directives only work when assembling
the file which defines the symbol.
Reported and tested by: andrew
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
On Ethernet packets have a minimal length, so very short packets get padding
appended to them. This padding is not stripped off in ip6_input() (due to
support for IPv6 Jumbograms, RFC2675).
That means PF needs to be careful when reassembling fragmented packets to not
include the padding in the reassembled packet.
While here also remove the 'Magic from ip_input.' bits. Splitting up and
re-joining an mbuf chain here doesn't make any sense.
Differential Revision: https://reviews.freebsd.org/D2189
Approved by: gnn (mentor)
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2188
Approved by: gnn (mentor)
Return EINVAL instead of EFTYPE if we have a multiboot kernel loaded but
failed to load the modules. This makes it clear that the kernel/module
should be handled by the multiboot handler but something went wrong.
Sponsored by: Citrix Systems R&D
Zero the list of modules array before using it, or else we might pass
uninitialized data in unused fields of the struct that will make Xen choke.
Also add a check to make sure malloc succeeds.
Sponsored by: Citrix Systems R&D
support for booting arm and arm64 from UEFI.
Differential Revision: https://reviews.freebsd.org/D2164
Reviewed by: emaste, imp (previous version)
Sponsored by: The FreeBSD Foundation
on reads or writes, the time marks are used to display idle time by
w(1) [1]. Instead, use vfs.devfs.dotimes as the selector of default
precision vs. using time_second. The later gives seconds precision,
which is good enough for the purpose.
Note that timestamp updates are unlocked and the updates itself, as
well as the check in devfs_timestamp, are non-atomic.
Noted by: truckman [1]
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the top-level HAL.
The athstats program is blindly using a copy of the ar5212 ANI stats structure
to pull out ANI statistics/state and this is problematic for the AR9300
HAL.
So:
* Define HAL_ANI_STATS and HAL_ANI_STATE
* Use HAL_ANI_STATS inside the AR5212 HAL
This commit doesn't (yet) convert the ar5212AniState -> HAL_ANI_STATE when
exporting it to userland; that'll come in the next commit.
Summary:
Add "GELI Passphrase:" prompt to boot loader.
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: (your name[s] here)
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
Test Plan:
Drop a head copy of check-password.4th into /boot and then apply the patch
(only the patch to /boot/check-password.4th is required; no other changes are
required but you do have to have a HEAD copy of check-password.4th to
apply the patch).
NB: The rest of your /boot files can be up to 2 years old but no older.
NB: The test won't work unless your kernel has the following change
https://svnweb.freebsd.org/base?view=revision&revision=273489
Now, put into /boot/loader.conf:
geom_eli_passphrase_prompt="YES"
and reboot.
You should be prompted for a GELI passphrase before the menu (if enabled),
just after loading loader.conf(5).
NB: It doesn't matter if you're using GELI or not. However if you are using
GELI and a sufficiently new enough release (has SVN r273489) and you entered
the proper passphrase to mount your GELI encrypted root device(s), you should
notice that the boot process did not stop (you went from loader all the way to login).
Reviewers: cperciva, allanjude, scottl, kmoore
Subscribers: jkh, imp
Differential Revision: https://reviews.freebsd.org/D2105
vocabularies delay-processing, password-processing, version-processing,
frame-drawing, menu-infrastructure, menu-namespace, menu-command-helpers,
and menusets-infrastructure. The net effect is to remove almost 200
definitions from the main forth vocabulary reducing the dictionary size
by over 50%. The chances of hitting "dictionary full" should be greatly
reduced by this patch.
MFC after: 3 days
X-MFC-to: stable/10
implementation.
The kernel RPC code, which is responsible for the low-level scheduling
of incoming NFS requests, contains a throttling mechanism that
prevents too much kernel memory from being tied up by NFS requests
that are being serviced. When the throttle is engaged, the RPC layer
stops servicing incoming NFS sockets, resulting ultimately in
backpressure on the clients (if they're using TCP). However, this is
a very heavy-handed mechanism as it prevents all clients from making
any requests, regardless of how heavy or light they are. (Thus, when
engaged, the throttle often prevents clients from even mounting the
filesystem.) The throttle mechanism applies specifically to requests
that have been received by the RPC layer (from a TCP or UDP socket)
and are queued waiting to be serviced by one of the nfsd threads; it
does not limit the amount of backlog in the socket buffers.
The original implementation limited the total bytes of queued requests
to the minimum of a quarter of (nmbclusters * MCLBYTES) and 45 MiB.
The former limit seems reasonable, since requests queued in the socket
buffers and replies being constructed to the requests in progress will
all require some amount of network memory, but the 45 MiB limit is
plainly ridiculous for modern memory sizes: when running 256 service
threads on a busy server, 45 MiB would result in just a single
maximum-sized NFS3PROC_WRITE queued per thread before throttling.
Removing this limit exposed integer-overflow bugs in the original
computation, and related bugs in the routines that actually account
for the amount of traffic enqueued for service threads. The old
implementation also attempted to reduce accounting overhead by
batching updates until each queue is fully drained, but this is prone
to livelock, resulting in repeated accumulate-throttle-drain cycles on
a busy server. Various data types are changed to long or unsigned
long; explicit 64-bit types are not used due to the unavailability of
64-bit atomics on many 32-bit platforms, but those platforms also
cannot support nmbclusters large enough to cause overflow.
This code (in a 10.1 kernel) is presently running on production NFS
servers at CSAIL.
Summary of this revision:
* Removes 45 MiB limit on requests queued for nfsd service threads
* Fixes integer-overflow and signedness bugs
* Avoids unnecessary throttling by not deferring accounting for
completed requests
Differential Revision: https://reviews.freebsd.org/D2165
Reviewed by: rmacklem, mav
MFC after: 30 days
Relnotes: yes
Sponsored by: MIT Computer Science & Artificial Intelligence Laboratory
%rdi, %rsi, etc are inadvertently bypassed along with the check to
see if the instruction needs to be repeated per the 'rep' prefix.
Add "MOVS" instruction support for the 'MMIO to MMIO' case.
Reviewed by: neel
Per Austin group issue #884, sh should not import IFS from the environment
but always set it to $' \t\n'. For wordexp(), however, it is documented and
useful for it to use IFS from the environment.
Since sh currently imports IFS from the environment, this change has no
functional effect.
MFC after: 1 week
The __builtin_init_dwarf_reg_size_table function is unimplemented in
clang 3.6 for AArch64. Comment it out for now and replace it with
a message and abort.
Tracked in upstream LLVM PR 22997
https://llvm.org/bugs/show_bug.cgi?id=22997
Submitted by: andrew
