Commit Graph

53 Commits

Author SHA1 Message Date
Ruslan Bukin
30b72b6871 Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D6091
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 11:53:37 +00:00
Andrew Turner
59c3cb81c1 Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machine
independent code that needs to know about INTRNG such as PCI drivers.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-04-15 16:05:41 +00:00
Andrew Turner
7133fe0f33 Almost all copies of platform_mp_init_secondary just called
intr_pic_init_secondary. Replace them with a direct call. On BCM2836
and ARMADA XP we need to add this function, but it can be empty.

Reviewed by:	ian, imp
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5460
2016-02-26 16:04:47 +00:00
Andrew Turner
3210b87554 Remove platform_mp_probe as it's almost identical on most ARM SoCs, and
slightly wrong on the others. We should just check if mp_ncpus is set to
more than one CPU as we may wish to run on a single core even when SMP is
available.

Reviewed by:	ian
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5458
2016-02-26 15:54:34 +00:00
Andrew Turner
243b36c321 Remove platform_ipi_send, it's an unneeded as all implementations are
identical.

Sponsored by:	 ABT Systems Ltd
2016-02-25 20:48:23 +00:00
Svatopluk Kraus
7758916f44 Move ARM_L2_PIPT option to std.armv6 for all armv6 platforms.
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.

In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
2016-02-22 11:47:28 +00:00
Andrew Turner
647a3bac7e Stop defining fdt_pic_table when building for ARM_INTRNG. 2016-02-11 11:49:27 +00:00
Michal Meloun
a89156f53f ARM: Use new ARMv6 naming conventions for cache and TLB functions
in all but ARMv4 specific files.
Expand ARMv6 compatibility stubs in cpu-v4.h. Use physical address
in L2 cache functions if ARM_L2_PIPT is defined.
2016-02-05 14:57:41 +00:00
Adrian Chadd
2b3ad18853 [intrng] Migrate the intrng code from sys/arm/arm to sys/kern/subr_intr.c.
The ci20 port (by kan@) is going to reuse almost all of the intrng code
since the SoC in question looks suspiciously like someone took an ARM
SoC design and replaced the ARM core with a MIPS core.

* migrate out the code;
* rename ARM_ -> INTR_;
* rename arm_ -> intr_;
* move the interrupt flush routine from intr.c / intrng.c into
  arm/machdep_intr.c - removing the code duplication and removing
  the ARM specific bits from here.

Thanks to the Star Wars: The Force Awakens premiere line for allowing
me a couple hours of quiet time to finish the universe builds.

Tested:

* make universe

TODO:

* The structure definitions in subr_intr.c still includes machine/intr.h
  which requires one duplicates all of the intrng definitions in
  the platform code (which kan has done, and I think we don't have to.)

  Instead I should break out the generic things (function declarations,
  common intr structures, etc) into a separate header.

* Kan has requested I make the PIC based IPI stuff optional.
2015-12-18 05:43:59 +00:00
Andrew Turner
ed18006cbf Create device options for the two common ARM timers.
Sponsored by:	ABT Systems Ltd
2015-11-21 16:23:56 +00:00
Andrew Turner
210d6af74d Move more bus_space_* files to be built by files.arm. This leaves the
definition in a file.* file under sys/arm/arm in the few cases we need it
for non-fdt platforms.

Sponsored by:	ABT Systems Ltd
2015-11-21 15:30:08 +00:00
Warner Losh
c192c5d300 Makeoption ARM_LITLE_ENDIAN does nothing. Remove it since it isn't
consistently used. It was a carry over from NetBSD that FreeBSD
doesn't use.
2015-11-20 21:49:46 +00:00
Andrew Turner
805471578e Remove bus_space_asm_generic.S from the per-SoC files.* files, it's already
in files.arm.

Sponsored by:	ABT Systems Ltd
2015-11-20 19:48:32 +00:00
Andrew Turner
aeef645f92 Stop setting {KERN,}PHYSADDR on armv6, it's unneeded.
Sponsored by:	ABT Systems Ltd
2015-11-20 16:12:22 +00:00
Ian Lepore
7ce00ee7b4 Rename arm_init_secondary_ic() -> arm_pic_init_secondary(). The latter is
the name the function will have when the new ARM_INTRNG code is integrated,
and doing this rename first will make it easier to toggle the new interrupt
handling code on/off with a config option for debugging.
2015-10-18 16:54:34 +00:00
Andrew Turner
ace157c3a9 Use the new gic option on all configs that need it. 2015-05-10 12:13:27 +00:00
Andrew Turner
087af50ab8 Include vm/pmap.h for pmap_kextract. 2015-04-04 23:03:11 +00:00
Andrew Turner
ff3b52bb19 Stop using machine/fdt.h in the arm kernel code when we don't need it. 2015-04-04 21:34:26 +00:00
Andrew Turner
0ebebb1260 Build the cpufunc_asm_* files based on the cpu type, not which config file
we happen to be building.
2015-03-29 22:43:39 +00:00
Andrew Turner
d9d02715d3 Remove cpufunc_asm_arm11.S from the ARMv7 configs, it's not used. 2015-03-29 21:45:28 +00:00
Andrew Turner
698234c19b Stop building unused cpuvunc_* files, we don't need anything from these. 2015-03-29 17:33:03 +00:00
Luiz Otavio O Souza
7836352b50 Implement GPIO_GET_BUS() method for all GPIO drivers.
Add helper routines to deal with attach and detach of gpiobus and gpioc
devices that are common to all drivers.
2015-01-31 19:32:14 +00:00
Luiz Otavio O Souza
876c1bd8b0 Clean up and fix the device detach routine and the failure path on GPIO
drivers.

This paves the way for upcoming work.
2015-01-31 12:17:07 +00:00
Ian Lepore
eb8711ce16 Rename bus_space-v6.c to bus_space_base.c, because it's not v6-specific
and now some v5 Marvell systems are using it.  Only define fdt_bus_tag
if option FDT is defined.
2015-01-21 03:44:29 +00:00
Ganbold Tsagaankhuu
e2763dca83 Enable Synopsys DesignWare Mobile Storage Host Controller
driver on Rockchip boards. It currently supports PIO mode
and dma mode needs external dma controller to be used.

Submitted by:   jmcneill
Approved by:    stas (mentor)
2015-01-20 09:07:28 +00:00
Andrew Turner
3f53a2d612 Rename gic_init_secondary to arm_init_secondary_ic to help with the merge
of the arm_intrng project branch.
2015-01-11 16:46:43 +00:00
Luiz Otavio O Souza
60245f5103 Fix the handling of pull-up and pull-down for RK3188.
For this to work the driver needs to know the bank it has attached to since
the registers for the first 12 pins are at a different location.

Move the lock initialization to simplify the code.
2015-01-07 19:15:11 +00:00
Luiz Otavio O Souza
1c15a29600 Reduce the maximum number of pins for the Rockchip RK3188, this driver
isn't supposed to manage all the GPIO pins in the system from a single
instance, instead it will attach to each one of the four available GPIO
controllers and only deal with one bank at time (32 pins per bank).

Rework part of the driver to take advantage of that, this simplify the
code a lot.

Also fix a bug in rk30_gpio_get_function() which wouldn't return the
correct values.

While here fix a typo in register name.
2015-01-07 16:55:55 +00:00
Ian Lepore
67009184e3 Remove -Wa,-march=armv7a from arm kernel configs, it makes clang 3.5 sad
and apparently isn't needed now that we're using the integrated assembler.
2015-01-01 23:21:46 +00:00
Ian Lepore
88b80af731 Add -march=armv7a to the kernel compile for all ARM systems which are v7a.
Submitted by:	Michal Meloun <meloun@miracle.cz>
2014-12-21 23:48:32 +00:00
Luiz Otavio O Souza
667357dc9b Moves all the duplicate code to a single function.
Verify for invalid modes and unwanted flags before pass the new flags to
driver.
2014-11-18 17:22:08 +00:00
Luiz Otavio O Souza
8839e0e9f3 Make the GPIO children attach to the first unit available and not only to
unit 0.

It seems that this 'simplification' was copied to all GPIO drivers in tree.

This fix a bug where a GPIO controller could fail to attach its children
(gpioc and gpiobus) if another GPIO driver attach first.
2014-10-28 18:33:59 +00:00
Ian Lepore
752ba93078 Rename OF_xref_phandle() to OF_node_from_xref() and add a new function
that provides the inverse translation, OF_xref_from_node().

Discussed with:	nwhitehorn
2014-09-01 18:51:01 +00:00
Hans Petter Selasky
ad76ab4299 Factor out kernel configuration for DWC OTG FDT attach code. 2014-05-29 11:13:40 +00:00
Andrew Turner
27521ff8e4 Add the start of the ARM platform code. This is based on the PowerPC
platform code, it is expected these will be merged in the future when the
ARM code is more complete.

Until more boards can be tested only use this with the Raspberry Pi and
rrename the functions on the other SoCs.

Reviewed by:	ian@
2014-05-17 11:27:36 +00:00
Andrew Turner
3664cbc0f0 Rename platform_gpio_init to be SoC specific, and make it static as it's
only called from this file.
2014-05-10 20:26:49 +00:00
Ganbold Tsagaankhuu
08d56ebf0a Add the codes for enabling CPU cores of Rockchip RK3188 SoC.
Enable SMP for Radxa Rock board.

Approved by:	stas (mentor)
2014-05-09 05:39:57 +00:00
Ganbold Tsagaankhuu
b4ce42b4b8 Switch to use arm_devmap_add_entry() to setup static device mapping.
Approved by:	stas (mentor)
2014-05-02 01:20:13 +00:00
Ganbold Tsagaankhuu
fe47fb7b1c Switch to my freebsd.org emal address in copyright.
Approved by:	stas (mentor)
2014-03-25 08:31:47 +00:00
Ian Lepore
5e4e1d4995 Eliminate irq_dispatch.S. Move the data items it contained into arm/intr.c
and the functionality it provided into arm/exception.S.  Rename the main
irq handling routine from arm_handler_execute() to arm_irq_handler() to
make it more congruent with how other exception handlers are named, and
also update its signature to reflect what has long been reality: it is
passed just a trapframe pointer, no interrupt number argument.
2014-03-10 18:10:09 +00:00
Warner Losh
59c993d121 Move all the files named foo/common.c to foo/foo_common.c, as
appropriate for each of the 'foo' in the tree. This will allow us to
compile them together (although symbol conflicts prevent us from doing
that today, this just fixes the file name collision).
2014-03-08 00:14:40 +00:00
Ian Lepore
add35ed5b8 Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352.  Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.

Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
2014-02-02 19:17:28 +00:00
Andrew Turner
979d76c948 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with
memory at the end of the kernel.

This helps reduce the SoC and board specific configuration required.

Reviewed by:	bsdimp
Tested by:	jmg (armeb), br
2014-01-28 09:12:04 +00:00
Ganbold Tsagaankhuu
bfb24e2a06 Add gpio parse routines according to sys/boot/fdt/dts/bindings-gpio.txt.
Reviewed by: stas@
2013-12-09 07:14:59 +00:00
Ganbold Tsagaankhuu
18d753d0fb Enable reset mechanism for rk3188.
Approved by: ray@
2013-11-25 11:02:58 +00:00
Ganbold Tsagaankhuu
421663eb64 Add watchdog driver for rk3188.
Approved by: ray@
2013-11-25 11:01:19 +00:00
Aleksandr Rybalko
a12e93c5ba Switch allwinner A10/A20 and rockchip ports to use common ARMv6/v7 bus_space tag.
Tested by: ganbold
2013-11-06 10:31:52 +00:00
Ian Lepore
515cbe8673 Call initarm_lastaddr() later in the init sequence, after establishing
static device mappings, rather than as the first of the initializations
that a platform can hook into.  This allows a platform to allocate KVA
from the top of the address space downwards for things like static device
mapping, and return the final "last usable address" result after that and
other early init work is done.

Because some platforms were doing work in initarm_lastaddr() that needs to
be done early, add a new initarm_early_init() routine and move the early
init code to that routine on those platforms.

Rename platform_devmap_init() to initarm_devmap_init() to match all the
other init routines called from initarm() that are designed to be
implemented by platform code.

Add a comment block that explains when these routines are called and the
type of work expected to be done in each of them.
2013-11-05 02:57:34 +00:00
Ian Lepore
3110e7eed8 Move remaining code and data related to static device mapping into the
new devmap.[ch] files.  Emphasize the MD nature of these things by using
the prefix arm_devmap_ on the function and type names (already a few of
these things found their way into MI code, hopefully it will be harder to
do by accident in the future).
2013-11-04 22:45:26 +00:00
Ian Lepore
ae7accbc18 Oops, one more instance of ARM_NOCACHE_KVA_SIZE was hiding under the couch.
This should have been cleaned up along with r257201.
2013-10-27 03:24:46 +00:00