Commit Graph

8149 Commits

Author SHA1 Message Date
Pedro F. Giffuni
32ceeb31a1 dhclient(1): correct obvious mismatch in get_char().
Correct switch between current and previous line buffers when
encountering a carriage return in the input.

CID:		1305719
Obtained from:	OpenBSD (CVS rev. 1.30)
MFC after:	3 days
2016-06-03 03:40:39 +00:00
Allan Jude
776db16a76 Address feedback from hrs@ re: r301059 (ifconfig subnet mask)
- Use NI_MAXHOST to size buffers for getnameinfo()
- remove non-standard 'full' inet6 address printing
- remove 'no scope' option
- use strchr(3) to optimize replacing separator character in lladdrs

Reviewed by:	gnn, jhb
Differential Revision:	https://reviews.freebsd.org/D2856
2016-06-02 03:16:02 +00:00
Don Lewis
a25ffb5ab7 Belatedly bump .Dd date for Dummynet AQM import in r300779. 2016-06-02 00:42:15 +00:00
Allan Jude
7c2aa74437 ifconfig(8) now supports some output formatting options
specified by the -f flag or IFCONFIG_FORMAT environment variable, the user
can request that inet4 subnet masks be printed in CIDR or dotted-quad
notation, in addition to the traditional hex output.
inet6 prefixes can be printed in CIDR as well.

For more documentation see the ifconfig(8) man page.

PR:		169072
Requested by:	seanc, marcel, brd, many others
Reviewed by:	gnn, jhb (earlier version)
Relnotes:	yes
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D2856
2016-05-31 17:30:08 +00:00
Ed Schouten
e47c947e6e Stop using the non-standard basename_r() function.
This change makes the code use the POSIX basename() function. It has the
advantage that (if implemented correctly), it also imposes no restrict
on the pathname length.

Notice that I haven't added any error handling to the strdup() call. It
looks like none of the other calls to strdup() and malloc() performed by
this utility do it either.

Reviewed by:	hrs
Differential Revision:	https://reviews.freebsd.org/D6626
2016-05-31 06:45:19 +00:00
Allan Jude
6713512842 Add Documentation for missing ifconfig(8) flags
autoconf / -autoconf
deprecated / -deprecated
pltime
vltime

PR:		209822
Submitted by:	Sevan Janiyan <venture37@geeklan.co.uk>
MFC after:	2 weeks
2016-05-29 03:44:37 +00:00
Allan Jude
b468a9ff1d Import the skein hashing algorithm, based on the threefish block cipher
Connect it to userland (libmd, libcrypt, sbin/md5) and kernel (crypto.ko)

Support for skein as a ZFS checksum algorithm was introduced in r289422
but is disconnected because FreeBSD lacked a Skein implementation.

A further commit will enable it in ZFS.

Reviewed by:	cem
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D6166
2016-05-29 01:15:36 +00:00
Allan Jude
1780e40715 Implement SHA-512 truncated (224 and 256 bits)
This implements SHA-512/256, which generates a 256 bit hash by
calculating the SHA-512 then truncating the result. A different initial
value is used, making the result different from the first 256 bits of
the SHA-512 of the same input. SHA-512 is ~50% faster than SHA-256 on
64bit platforms, so the result is a faster 256 bit hash.

The main goal of this implementation is to enable support for this
faster hashing algorithm in ZFS. The feature was introduced into ZFS
in r289422, but is disconnected because SHA-512/256 support was missing.
A further commit will enable it in ZFS.

This is the follow on to r292782

Reviewed by:	cem
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D6061
2016-05-28 16:06:07 +00:00
Don Lewis
91336b403a Import Dummynet AQM version 0.2.1 (CoDel, FQ-CoDel, PIE and FQ-PIE).
Centre for Advanced Internet Architectures

Implementing AQM in FreeBSD

* Overview <http://caia.swin.edu.au/freebsd/aqm/index.html>

* Articles, Papers and Presentations
  <http://caia.swin.edu.au/freebsd/aqm/papers.html>

* Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html>

Overview

Recent years have seen a resurgence of interest in better managing
the depth of bottleneck queues in routers, switches and other places
that get congested. Solutions include transport protocol enhancements
at the end-hosts (such as delay-based or hybrid congestion control
schemes) and active queue management (AQM) schemes applied within
bottleneck queues.

The notion of AQM has been around since at least the late 1990s
(e.g. RFC 2309). In recent years the proliferation of oversized
buffers in all sorts of network devices (aka bufferbloat) has
stimulated keen community interest in four new AQM schemes -- CoDel,
FQ-CoDel, PIE and FQ-PIE.

The IETF AQM working group is looking to document these schemes,
and independent implementations are a corner-stone of the IETF's
process for confirming the clarity of publicly available protocol
descriptions. While significant development work on all three schemes
has occured in the Linux kernel, there is very little in FreeBSD.

Project Goals

This project began in late 2015, and aims to design and implement
functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE
in FreeBSD (with code BSD-licensed as much as practical). We have
chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall
and traffic shaper. Implementation of these AQM schemes in FreeBSD
will:
* Demonstrate whether the publicly available documentation is
  sufficient to enable independent, functionally equivalent implementations

* Provide a broader suite of AQM options for sections the networking
  community that rely on FreeBSD platforms

Program Members:

* Rasool Al Saadi (developer)

* Grenville Armitage (project lead)

Acknowledgements:

This project has been made possible in part by a gift from the
Comcast Innovation Fund.

Submitted by:	Rasool Al-Saadi <ralsaadi@swin.edu.au>
X-No objection:	core
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D6388
2016-05-26 21:40:13 +00:00
Andriy Voskoboinyk
b628bdccce ifconfig: set by default FCC regulatory domain for wireless interfaces.
Change default regulatory domain from DEBUG (no limitations;
exposes all device channels) to FCC; as a result, newly created wireless
interface with default settings will have less chances to violate
country-specific regulations.

This change will not affect drivers with pre-initialized regdomain
structure (currentry ath(4) and mwl(4)); in that case, the default
channel list must correspond to the default regdomain / country setting.

You can switch to another regdomain / country via corresponding
ifconfig(8) options; the driver must implement ic_getradiocaps()
method to restore full channel list.

Full country / regdomain list may be obtained via
'ifconfig <iface> list countries' command.

Example: change country to Germany:
ifconfig wlan0 down	# all wlans on the device must be down
ifconfig wlan0 country DE
ifconfig wlan0 up
# wpa_supplicant(8), dhclient(8) etc

At the creation time:
ifconfig wlan0 create wlandev wpi0 country DE

To make changes permanent add the following line to the rc.conf(5):
create_args_wlan0="country DE"

Tested with
 - Intel 3945BG (wpi(4)).
 - WUSB54GC (rum(4)).

Reviewed by:	adrian
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D6228
2016-05-26 13:14:08 +00:00
Don Lewis
e60dd0e86a Fix a couple of Coverity Unintended sign extension sign extension
defects.  When shifting an unsigned byte into the upper 8 bits of
an int and the resulting value is greater than 0x7FFFFFF, the result
will be sign extended when converting to a 64 bit unsigned long.
Fix by casting to (uint64_t) before the shift.

Reported by:	Coverity
CID:		1356044, 1356045
Reviewed by:	ken
2016-05-25 15:49:29 +00:00
Don Lewis
4992a19282 Fix a couple of new instances of a false positive Coverity buffer
overflow defect.  Use the new CCB_CLEAR_ALL_EXCEPT_HDR() macro
instead of the calling bzero() on the pointer to the header used
as an array and indexed by 1.

Don't leak a buffer after executing "goto restart_report" by
overwriting its pointer with the results of another calloc().
Be sure to clear the buffer before reusing it.  (CID 1356042)

Reported by:	Coverity
CID:		1356022, 1356034, 1356023, 1356035, 1356042
Reviewed by:	ken
2016-05-25 15:43:01 +00:00
Don Lewis
95320acebc Fix multiple Coverity Out-of-bounds access false postive issues in CAM
The currently used idiom for clearing the part of a ccb after its
header generates one or two Coverity errors for each time it is
used.  All instances generate an Out-of-bounds access (ARRAY_VS_SINGLETON)
error because of the treatment of the header as a two element array,
with a pointer to the non-existent second element being passed as
the starting address to bzero().  Some instances also alsp generate
Out-of-bounds access (OVERRUN) errors, probably because the space
being cleared is larger than the sizeofstruct ccb_hdr).

In addition, this idiom is difficult for humans to understand and
it is error prone.  The user has to chose the proper struct ccb_*
type (which does not appear in the surrounding code) for the sizeof()
in the length calculation.  I found several instances where the
length was incorrect, which could cause either an actual out of
bounds write, or incompletely clear the ccb.

A better way is to write the code to clear the ccb itself starting
at sizeof(ccb_hdr) bytes from the start of the ccb, and calculate
the length based on the specific type of struct ccb_* being cleared
as specified by the union ccb member being used.  The latter can
normally be seen in the nearby code.  This is friendlier for Coverity
and other static analysis tools because they will see that the
intent is to clear the trailing part of the ccb.

Wrap all of the boilerplate code in a convenient macro that only
requires a pointer to the desired union ccb member (or a pointer
to the union ccb itself) as an argument.

Reported by:	Coverity
CID:		1007578, 1008684, 1009724, 1009773, 1011304, 1011306
CID:		1011307, 1011308, 1011309, 1011310, 1011311, 1011312
CID:		1011313, 1011314, 1011315, 1011316, 1011317, 1011318
CID:		1011319, 1011320, 1011321, 1011322, 1011324, 1011325
CID:		1011326, 1011327, 1011328, 1011329, 1011330, 1011374
CID:		1011390, 1011391, 1011392, 1011393, 1011394, 1011395
CID:		1011396, 1011397, 1011398, 1011399, 1011400, 1011401
CID:		1011402, 1011403, 1011404, 1011405, 1011406, 1011408
CID:		1011409, 1011410, 1011411, 1011412, 1011413, 1011414
CID:		1017461, 1018387, 1086860, 1086874, 1194257, 1229897
CID:		1229968, 1306229, 1306234, 1331282, 1331283, 1331294
CID:		1331295, 1331535, 1331536, 1331539, 1331540, 1341623
CID:		1341624, 1341637, 1341638, 1355264, 1355324
Reviewed by:	scottl, ken, delphij, imp
MFH:		1 month
Differential Revision:	https://reviews.freebsd.org/D6496
2016-05-24 00:57:11 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Conrad Meyer
fb0eab090e dhclient: Fix the trivial buffer overruns correctly
A DHCP client identifier is simply the hardware type (one byte) concatenated
with the hardware address (some variable number of bytes, but at most 16).
Limit the size of the temporary buffer to match and the rest of the
calculations shake out correctly.

This is a follow-up to the incorrect r299512, reverted in r300172.

CIDs:		1008682, 1305550
Sponsored by:	EMC / Isilon Storage Division
2016-05-18 23:41:55 +00:00
Conrad Meyer
4441bd735f Revert r299512
It broke client identifiers because I misunderstood the intent of the code.
There is still a minor issue detected by Coverity (at least, I can't find where
the code proves it isn't an issue).  I'll follow up with a better fix for the
CIDs.

Reported by:	Ian FREISLICH
Sponsored by:	EMC / Isilon Storage Division
2016-05-18 23:35:37 +00:00
Andrey V. Elsukov
825f02a9ed Make ipfw internal olist output more user friendly.
Print object type as string for known types.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2016-05-17 11:22:08 +00:00
Andrey V. Elsukov
2685841b38 Make named objects set-aware. Now it is possible to create named
objects with the same name in different sets.

Add optional manage_sets() callback to objects rewriting framework.
It is intended to implement handler for moving and swapping named
object's sets. Add ipfw_obj_manage_sets() function that implements
generic sets handler. Use new callback to implement sets support for
lookup tables.
External actions objects are global and they don't support sets.
Modify eaction_findbyname() to reflect this.
ipfw(8) now may fail to move rules or sets, because some named objects
in target set may have conflicting names.
Note that ipfw_obj_ntlv type was changed, but since lookup tables
actually didn't support sets, this change is harmless.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2016-05-17 07:47:23 +00:00
Don Lewis
c98907a4f4 Add an assertion to catch a potential underflow in an array index
calculation, though this should not happen in the current code.

Reported by:	Coverity
CID:		1008486
MFC after:	3 weeks
2016-05-16 08:07:32 +00:00
Marcelo Araujo
f8358c11a5 For pointers use NULL instead of 0.
MFC after:	2 weeks.
2016-05-16 00:36:12 +00:00
Marcelo Araujo
798a749aae For pointers use NULL instead of 0.
MFC after:	2 weeks.
2016-05-16 00:35:39 +00:00
Marcelo Araujo
2ef6931a15 For pointers use NULL instead of 0.
MFC after:	2 weeks.
2016-05-16 00:34:48 +00:00
Don Lewis
c871174916 Use strlcpy() instead of strncpy() when copying ifname to ensure
that it is NUL terminated.  Additional NUL padding is not required
for short names.

Use sizeof(destination) in a few places instead of IFNAMSIZ.

Cast afp->af_ridreq and afp->af_addreq  to make the intent of
the code more obvious.

Reported by:	Coverity
CID:		1009628, 1009630, 1009631, 1009632, 1009633, 1009635, 1009638
CID:		1009639, 1009640, 1009641, 1009642, 1009643, 1009644, 1009645
CID:		1009646, 1009647, 1010049, 1010050, 1010051, 1010052, 1010053
CID:		1010054, 1011293, 1011294, 1011295, 1011296, 1011297, 1011298
CID:		1011299, 1305821, 1351720, 1351721
MFC after:	1 week
2016-05-16 00:25:24 +00:00
Pedro F. Giffuni
bdfd68dca7 routed(8): Use arc4random_uniform instead of arc4random.
Use arc4random_uniform() when the desired random number upper bound
is not a power of two.

While here, we don't need srandom() and friends anymore.

Obtained from:	OpenBSD (CVS rev. 1.20)
2016-05-15 06:06:22 +00:00
Pedro F. Giffuni
e09d48f656 routed(8): Misc. cleanups to squelch Coverity.
table.c:
Copy into fixed size buffer.

trace.c:
Argument got dup2() cannot be negative.
Copy into fixed size buffer.

CID:		1006785, 1006786, 271301
Obtained from:	NetBSD
MFC after:	2 weeks.
2016-05-15 03:04:21 +00:00
Pedro F. Giffuni
65e2bd0ab8 routed(8): Dereference before null check.
CID:		272432
Obtained from:	NetBSD (CVS ref. 1.16)
MFC after:	2 weeks.
2016-05-15 02:41:20 +00:00
Pedro F. Giffuni
7b011d21db routed(8): Avoid NULL de-reference and two possible memory leaks.
The reports and fixes are straightforward but it's nice to be able
to confirm against NetBSD.

CID:		271080, 272306, 272307
Obtained from:	NetBSD (CVS ref. 1.21 - 1.23)
MFC after:	2 weeks.
2016-05-15 02:30:34 +00:00
Pedro F. Giffuni
5728318b35 Avoid NULL de-references.
CID:		271079
Obtained from:	NetBSD
MFC after:	2 weeks.
2016-05-14 23:32:03 +00:00
Pedro F. Giffuni
365cb451d3 routed(8): Use arc4random.
CID:		1305962
Obtained from:	NetBSD (CVS Rev. 1.34, Itojun)
2016-05-14 23:22:19 +00:00
Pedro F. Giffuni
0b279f8c94 routed: Fix use after free.
For the multihomed case, ifp be used after being freed. NULL the value
after freeing it and avoid getting into the branch without reassigning
a new value.

CID:		272671
Obtained from:	NetBSD
MFC after:	2 weeks
2016-05-14 23:07:26 +00:00
Pedro F. Giffuni
562c5a82cb routed(8): use NULL instead of zero for pointers. 2016-05-14 22:40:08 +00:00
Don Lewis
eeb6394364 Check for socket creation success before calling bind().
Reported by:	Coverity
CID:		1194209
2016-05-12 05:43:54 +00:00
Conrad Meyer
021b92e5ba dhclient: Fix some trivial buffer overruns
There was some confusion about how to limit a hardware address to at most 16
bytes.  In some cases it would overrun a byte off the end of the array.
Correct the types and rectify the overrun.

Reported by:	Coverity
CIDs:		1008682, 1305550
Sponsored by:	EMC / Isilon Storage Division
2016-05-12 04:28:22 +00:00
Conrad Meyer
fdaa5d1c07 camcontrol(8): Fix another trivial double-free
Reported by:	Coverity
CID:		1331222
Sponsored by:	EMC / Isilon Storage Division
2016-05-11 22:25:14 +00:00
Conrad Meyer
3aeebae9ca camcontrol(8): Fix trival double-free
Reported by:	Coverity
CID:		1331223
Sponsored by:	EMC / Isilon Storage Division
2016-05-11 22:22:49 +00:00
Conrad Meyer
333d028407 fsck_ffs: Don't overrun mount device buffer
Maybe this case is impossible.  Either way, when attempting to "/dev/"-prefix a
non-global device name, check that we do not overrun the f_mntfromname buffer.

In this case, truncating (with strlcpy or similar) would not be useful, since
the f_mntfromname result of getmntpt() is passed directly to open(2) later.

Reported by:	Coverity
CID:		1006789
Sponsored by:	EMC / Isilon Storage Division
2016-05-11 16:20:23 +00:00
Edward Tomasz Napierala
377b6d1e7c When rerooting, take the init(8) path from argv[0] instead of fetching
it via kern.proc.pathname sysctl(2).  In some cases - booting from NFS
or rerooting after replacing the init binary with a new one - the sysctl
would fail.  In other cases - after upgrading, which moves the old init
to /sbin/init.bak - it would return /sbin/init.bak, which is the actual
path of the running init, instead of /sbin/init.

Reported by:	Melissa Jenkins <melissa-freebsd at littlebluecar.co.uk>, jilles@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-11 10:03:13 +00:00
Edward Tomasz Napierala
126ba2193b When rerooting, ignore ESRCH returned from kill(2). I couldn't reproduce
this by myself, but apparently it sometimes happens when rerooting from
single user mode.

Reported by:	jilles@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-11 09:30:18 +00:00
Edward Tomasz Napierala
b8a1930fcf Cosmetic fixes for growfs(8) - remove unneeded capitalization and a spurious
newline, clarify a message.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-11 09:26:23 +00:00
Edward Tomasz Napierala
e49345fa3d Update the example growfs(8) manual page to include information on how
to make the system "notice" the updated disk size.

(Relnotes, since I've forget to set it for "camcontrol reprobe", and
it's worth mentioning.)

MFC after:	1 month
Relnotes:	yes
Sponsored by:	The FreeBSD Foundation
2016-05-10 18:28:38 +00:00
Edward Tomasz Napierala
d68fae5849 Add "camcontrol reprobe" subcommand, and implement it for da(4).
This makes it possible to manually force updating capacity data
after the disk got resized. Without it it might be neccessary to
reboot before FreeBSD notices updated disk size under eg VMWare.

Discussed with:	imp@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6108
2016-05-10 15:46:33 +00:00
Baptiste Daroussin
997f8ff84f Rename getline with get_line to avoid collision with getline(3)
When getline(3) in 2009 was added a _WITH_GETLINE guard has also been added.
This rename is made in preparation for the removal of this guard
2016-05-10 11:35:03 +00:00
Andriy Voskoboinyk
db930544a3 ifconfig: fix check for 40 MHz channels while applying country/regdomain.
Do not use 20 MHz channel list while checking 40 MHz channels;
it may be different. Just use the corresponding list instead.

Tested by:	Masachika ISHIZUKA <ish@amail.plala.or.jp>

PR:		209328
2016-05-09 16:15:52 +00:00
Renato Botelho
89d18e14f1 Add missing parameters -N and -l to reroot and halt usage()
Approved by:	bapt
Sponsored by:	Rubicon Communications (Netgate)
Differential Revision:	https://reviews.freebsd.org/D6173
2016-05-06 20:49:14 +00:00
Pedro F. Giffuni
eabd8f1210 nvmecontrol.8: minor spelling fix.
No functional change.
2016-05-06 03:11:34 +00:00
Enji Cooper
430f7286a5 Merge ^/user/ngie/release-pkg-fix-tests to unbreak how test files are installed
after r298107

Summary of changes:

- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
  namespacing is kept with FILES appropriately, and that this shouldn't need
  to be repeated if the namespace changes -- only the definition of PACKAGE
  needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
  `tests`. In the event we get to the point where things can be split up
  enough in the base system, it would make more sense to group the tests
  with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
  previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
  bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
  ${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
  and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)

Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.

MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
2016-05-04 23:20:53 +00:00
Alan Somers
8907f744ff Improve performance and functionality of the bitstring(3) api
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.

Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.

All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.

sys/sys/bitstring.h:
        Convert the majority of the existing bit string implementation from
        macros to inline functions.

        Properly protect the implementation from inadvertant macro expansion
        when included in a user's program by prefixing all private
        macros/functions and local variables with '_'.

        Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
        bit_ffc() in terms of their "at" counterparts.

        Provide a kernel implementation of bit_alloc(), making the full API
        usable in the kernel.

        Improve code documenation.

share/man/man3/bitstring.3:
        Add pre-exisiting API bit_ffc() to the synopsis.

        Document new APIs.

        Document the initialization state of the bit strings
        allocated/declared by bit_alloc() and bit_decl().

        Correct documentation for bitstr_size(). The original code comments
        indicate the size is in bytes, not "elements of bitstr_t". The new
        implementation follows this lead. Only hastd assumed "elements"
        rather than bytes and it has been corrected.

etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
        Add tests for all existing and new functionality.

include/bitstring.h
	Include all headers needed by sys/bitstring.h

lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
        Include bitstring.h instead of sys/bitstring.h.

sbin/hastd/activemap.c:
        Correct usage of bitstr_size().

sys/dev/xen/blkback/blkback.c
        Use new bit_alloc.

sys/kern/subr_unit.c:
        Remove hard-coded assumption that sizeof(bitstr_t) is 1.  Get rid of
        unrb.busy, which caches the number of bits set in unrb.map.  When
        INVARIANTS are disabled, nothing needs to know that information.
        callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
        Eliminating unrb.busy saves memory, simplifies the code, and
        provides a slight speedup when INVARIANTS are disabled.

sys/net/flowtable.c:
        Use the new kernel implementation of bit-alloc, instead of hacking
        the old libc-dependent macro.

sys/sys/param.h
        Update __FreeBSD_version to indicate availability of new API

Submitted by:   gibbs, asomers
Reviewed by:    gibbs, ngie
MFC after:      4 weeks
Sponsored by:   Spectra Logic Corp
Differential Revision:  https://reviews.freebsd.org/D6004
2016-05-04 22:34:11 +00:00
Pedro F. Giffuni
dd3f00cbaf fsck_msdosfs: Adjust a check.
The on-disk FAT array does not include anything before CLUST_FIRST,
compensate in size check.

Obtained from:	NetBSD (CVS Rev. 1.20)
MFC after:	2 weeks
2016-05-04 22:27:22 +00:00
Marcelo Araujo
2c953857dd Use MIN macro from sys/param.h.
MFC after:	2 weeks
2016-05-02 01:40:31 +00:00
Marcelo Araujo
1120faab41 Use MIN/MAX macros from sys/param.h.
MFC after:	2 weeks.
2016-05-02 01:28:21 +00:00