replace magic numbers with constants to keep this from happening again.
Without this fix, some programs would occasionally get SIGTRAP instead
of SIGILL on an illegal instruction. This affected Altivec detection
in pixman, and possibly other software.
Reported by: Andreas Tobler
MFC after: 1 week
error if '..' is still there but changed between lookup and check.
Start relookup instead. Rename is supposed to change '..' reference
atomically, so transient failures introduced by r191137 are wrong.
While rearranging the code to allow lookup restart in ufs_lookup(),
remove the comment that only distracts the reader.
Noted and reviewed by: tegge
Also reported by: pho
MFC after: 1 month
- fix bug where tail pointer of the free list would not get advanced
- clear entry's next pointer when it is added to the freelist to avoid freeing
an entry that it still points to
busy count. Only mappings that allow write access should be prevented by
a non-zero busy count.
(The prohibition on mapping pages for read access when they have a non-
zero busy count originated in revision 1.202 of i386/i386/pmap.c when
this code was a part of the pmap.)
Reviewed by: tegge
as well as providing stateful load balancing when used with RADIX_MPATH.
- Currently compiled in to i386 and amd64 but disabled by default, it can be enabled at
runtime with 'sysctl net.inet.flowtable.enable=1'.
- Embedded users can remove it entirely from the kernel by adding 'nooption FLOWTABLE' to
their kernel config files.
- A minimal hookup will be added to ip_output in a subsequent commit. I would like to see
more review before bringing in changes that require more churn.
Supported by: Bitgravity Inc.
as the renaming only changes internal gvinum names and will not alter the geom
topology.
- The topology lock was not held when calling g_wither_geom after renaming.
registers.
- Cleanup PCI-X capability printf to not leave a dangling "supports" for
some PCI-X bridges.
- Display additional PCI express details including the negotiated and max
link width and the actual and maximum supported max payload.
MFC after: 1 month
a tag that has BUS_DMA_KEEP_PG_OFFSET set. Otherwise the page could be
reused with a non-zero offset by a tag that doesn't have
BUS_DMA_KEEP_PG_OFFSET leading to data corruption.
Sleuthing by: avg
Reviewed by: scottl
when polled mode is enabled. This should help with duplicated/missing
characters problem at mountroot, geli, etc. prompts on multi CPU systems
while kbdmux(4) is enabled.
Tested by: Tobias Grosser <grosser -at- fim -dot- uni-passau -dot- de>
Tested by: Fabian Keil <freebsd-listen -at- fabiankeil -dot- de>
MFC after: 3 days
audit_bsm_fcntl.c contain utility routines to map local fcntl
commands into BSM constants. Adaptation to the FreeBSD kernel
environment will follow in a future commit.
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
MFC after: 2 weeks
use to identify if the socket is the same one that a cached request
came in on. It is set by nfsrvd_addsock() to a unique value generated
by incrementing an unsigned 64bit static variable for each assignment
and then the value of xp_sockref is tested to see if it is equal to
the value that was saved with the cached reply.
Submitted by: rmacklem
Reviewed by: dfr
Approved by: kib (mentor)
network load.
1. Leave the RX interrupt routine if there is no mbuf available.
2. Properly initialize and track tx_desc_used_count counter so as not to
leak mbuf while traversing used descriptors.
Obtained from: Semihalf
VFS_VGET() has returned in ufs_lookup(). If the '..' lookup started
immediately before the parent directory was removed, we might return
either cleared or unrelated inode otherwise.
Ufs_lookup() is split into new function ufs_lookup_() that either does
lookup, or verifies that directory entry exists and references supplied
inode number.
Reviewed by: tegge
Tested by: pho,
Andreas Tobler <andreast-list fgznet ch> (previous version)
MFC after: 1 month
naming of the partitions (GEOM_PART_EBR_COMPAT). When
compatibility is enabled, changes to the partitioning are
disallowed.
Remove the device name aliasing added previously to provide
backward compatibility, but which in practice doesn't give
us anything.
Enable compatibility on amd64 and i386.
In the good old days it was possible to have dev_t's that referred to
nonexistent devices. In these cases devtoname() automatically generated
names. This is no longer possible, so remove this dead code.
Discussed with: kib
Remove the `udev' variable, which has a different type than the original
function argument and si_drv0. The `udev' name is also misleading,
because it is not the number returned by dev2udev(). Rename this
argument to `unit'. It is the same number as returned by dev2unit().
We should still access si_drv0 using dev2unit(). Also change the
KASSERT() to really print the udev instead of the unit number. I suspect
it's still useful to print the unit number, especially for devices that
use clone lists, so keep the unit number in the panic string.
- Do not iterate int 15h, function e820h twice. Instead, we use STAILQ to
store each return buffer and copy all at once.
- Export optional extended attributes defined in ACPI 3.0 as separate
metadata. Currently, there are only two bits defined in the specification.
For example, if the descriptor has extended attributes and it is not
enabled, it has to be ignored by OS. We may implement it in the kernel
later if it is necessary and proven correct in reality.
- Check return buffer size strictly as suggested in ACPI 3.0.
Reviewed by: jhb
- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
- Remove redundant softc members for RIDs.
- Change some softc members to be unsigned where more appropriate.
- Add some missing const.
- Remove support for mmap(2)'ing VGA I/O as it was broken [1] and
not required by X.Org anyway.
- Fix some confusion between bus, physical and virtual addresses
which mostly consisted in using members of struct video_adapter
inappropriately but wasn't fatal except for the regular framebuffer
mmap(2)'ing.
- Remove redundant bzero(9)'ing of the softc.
- Don't map the framebuffer twice in case the firmware has already
mapped it as besides wasting resources this isn't possible with
all MMUs. This is a bit tricky as a) just because the firmware
provides a property with a virtual address doesn't mean it's
actually mapped (but typically is when the framebuffer is the
console) and b) the firmware doesn't necessarily map the it with
the same byteorder as we do. This make machfb(4) work on machines
with cheetah-class MMUs (including X.Org).
Reported by: Michael Plass [1]
MFC after: 3 days
addresses to BARs into new pci_read_bar() and pci_write_bar() routines.
pci_add_map(), pci_alloc_map(), and pci_delete_resource() now use these
routines to work with BARs.
- Just pass the device_t for the new PCI device to various routines instead
of passing the device, bus, slot, and function.
Reviewed by: imp
open partition. This fixes access to partitions whose starting offset
is >= 2 TB.
Submitted by: "James R. Van Artsdalen" james jrv.org
MFC after: 3 days
we recognize its a retransmit, ahead of the PR-SCTP
work. Without this fix, we end up NOT reducing flight
size and causing an miscalculation when PR-SCTP is active
and data is skipped.
Obtained from: Michael Tuexen.
identify a station operating in turbo-boost mode because it has a
pure ofdm rate set; add an explicit check for the channel type
instead of depending on IEEE80211_NODE_ERP being set
Remote host can advertise smaller MSS than that of sender so upper
stack might have adjusted the MSS which in turn generates IP
packets that are less size than that of interface MTU.
Reported by: Bjoern Koenig ( bkoenig <> alpha-tierchen dot de )
Tested by: Bjoern Koenig ( bkoenig <> alpha-tierchen dot de )
MFC after: 3 days
in sys/nfs/nfs_nfssvc.c by registering with it using the
nfsd_call_nfsserver function pointer. Also, add the build glue for
nfs_nfssvc.c optionally based on "nfsserver" and also as a loadable
module.
Submitted by: rmacklem
Reviewed by: kib
Approved by: kib (mentor)
and CARPSTATS_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the implementation
of these statistics, such as using per-CPU versions of the data
structure.
MFC after: 3 days
and PIMSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
and MRTSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
IGMPSTAT_ADD() and IGMPSTAT_INC(), rather than directly
manipulating the fields of the structure. This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.
MFC after: 3 days
macros: ICMPSTAT_ADD(), ICMPSTAT_INC(), ICMP6STAT_ADD(), and
ICMP6STAT_INC(), rather than directly manipulating the fields
of these structures across the kernel. This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.
In on case, icmp6stat members are manipulated indirectly, by
icmp6_errcount(), and this will require further work to fix
for per-CPU stats.
MFC after: 3 days
Update stats in struct udpstat using two new macros, UDPSTAT_ADD()
and UDPSTAT_INC(), rather than directly manipulating the fields
across the kernel. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structures.
MFC after: 3 days
and UDPSTAT_INC(), rather than directly manipulating the fields
across the kernel. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structures.
MFC after: 3 days
CPUs known to use 128 byte cache lines and defaulting to 32, use the dcbz
instruction to measure it. Also make dcbz behave the way you would
expect on PPC 970.
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel. This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.
MFC after: 3 days
TCPSTAT_INC(), rather than directly manipulating the fields across the
kernel. This will make it easier to change the implementation of
these statistics, such as using per-CPU versions of the data structures.
MFC after: 3 days
but do not actually invoke KDB. This includes recoverable machine checks
encountered in kernel mode.
This patch causes machines with Grackle host-PCI bridges to be able to
correctly enumerate them again.
MFC after: 3 days
not populated in parent directory if negative entry was being
created, yet entry itself was added to the nc_neg list. It was
possible for parent vnode to get discarded later, leaving negative
entry pointing to now unused memory block.
Reported by: dho
Revewed by: kib
-UdpAliasIn(): correctly check return code after modules ran.
-alias_nbt: in case of malformed packets (or some other unrecoverable
error), toss the packet.
Simplify in/out functions.
Remove a hack to generate more efficient code for port numbers below
0x100, which has been obsolete for at least ten years, because GCC has
an asm constraint to specify that.
Remove a hack to generate more efficient code for port numbers below
0x100, which has been obsolete for at least ten years, because GCC has
an asm constraint to specify that.
Submitted by: Christoph Mallon <christoph mallon gmx de>
a reservation, unless all of the reservation's pages were free, the
reservation was moved to the head of the partially-populated reservations
queue, where it would be the next reservation to be broken in case the
free page queues were emptied. Now, instead, I am moving it to the tail.
Very likely this reservation is in the process of being freed in its
entirety, so placing it at the tail of the queue makes it more likely that
the underlying physical memory will be returned to the free page queues as
one contiguous chunk. If a reservation must be broken, it will, instead,
be the longest unchanged reservation, which is arguably the reservation
that is least likely to ever achieve promotion or be freed in its entirety.
MFC after: 6 weeks
dependency tracking and ordering enforcement.
With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.
The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.
The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.
For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.
A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.
Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.
The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.
Reviewed by: bz
Approved by: julian (mentor)
1) Flag it and only access that command on the 3c1
2) The TX PLL appears to power down when not in use, so we have to power
it back up when we've been idle. Do this at the start of ifstart.
Otherwise we fall off the net.
have other media to test against, I've left that media reporting
unchanged.
o Enable the TX_PLL when we enable TX. This is harmless on most
cards, but required to get the 3c1 CF card working. Power savings
could be had by managing this better, but for now it gets my card
working.
when using the "self" keyword in tables or as ()-style host address and
fixes "ifconfig -g all" output.
PR: kern/130977, kern/131310
Submitted by: Mikolaj Golub
MFC after: 3 days
the removal of NQNFS, but was left in in case it was required for NFSv4.
Since our new NFSv4 client and server can't use it for their
requirements, GC the old mechanism, as well as other unused lease-
related code and interfaces.
Due to its impact on kernel programming and binary interfaces, this
change should not be MFC'd.
Proposed by: jeff
Reviewed by: jeff
Discussed with: rmacklem, zach loafman @ isilon
Check the condition and return ENOENT then.
In nfs_lookup(), respect ENOENT return from cache_lookup() when it is caused
by dvp reclaim.
Reported and tested by: pho
the mappings without any of read and execution rights, in particular,
the PROT_NONE entries. This makes mlockall(2) work for the process
address space that has such mappings.
Since protection mode of the entry may change between setting
MAP_ENTRY_IN_TRANSITION and final pass over the region that records
the wire status of the entries, allocate new map entry flag
MAP_ENTRY_WIRE_SKIPPED to mark the skipped PROT_NONE entries.
Reported and tested by: Hans Ottevanger <fbsdhackers beasties demon nl>
Reviewed by: alc
MFC after: 3 weeks
types of MAC overheads such as preambles, link level retransmissions
and more.
Note- this commit changes the userland/kernel ABI for pipes
(but not for ordinary firewall rules) so you need to rebuild
kernel and /sbin/ipfw to use dummynet features.
Please check the manpage for details on the new feature.
The MFC would be trivial but it breaks the ABI, so it will
be postponed until after 7.2 is released.
Interested users are welcome to apply the patch manually
to their RELENG_7 tree.
Work supported by the European Commission, Projects Onelab and
Onelab2 (contract 224263).
We typically wire translation to devices with TLB1 entries and
pmap_kextract() does not know about those and returns 0. This
causes false positives (read: all serial ports suddenly become
the console).
Do not use Giant for kbdmux(4) locking. This is wrong and apparently
causing more problems than it solves. This will re-open the issue
where interrupt handlers may race with kbdmux(4) in polling mode.
Typical symptoms include (but not limited to) duplicated and/or
missing characters when low level console functions (such as gets)
are used while interrupts are enabled (for example geli password
prompt, mountroot prompt etc.)
MFC after: 3 days
Most compilers nowadays (including GCC) are smart enough to know what's
going on and generate more efficient code anyway.
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
It turns out my handling of SIGTTOU and SIGTTIN didn't entirely comply
to the standards. It is true that in the SIGTTOU case we should not
return EIO when the signal is ignored/blocked, but in the SIGTTIN case
we must.
See also: POSIX issue 7 section 11.1.4
(framing, parity, etc), but does not indicate characters
being received. Since no chracters have been received,
ignore the line errors.
PR: 131006
MFC after: 3 days
the size and cost of name cache entries, but make adding debugging
and tracing easier.
Add SDT DTrace probes for various namecache events:
vfs:namecache:enter:done - new entry in the name cache, passed parent
directory vnode pointer, name added to the cache, and child vnode
pointer.
vfs:namecache:enter_negative:done - new negative entry in the name cache,
passed parent vnode pointer, name added to the cache.
vfs:namecache:fullpath:enter - call to vn_fullpath1() is made, passed
the vnode to resolve to a name.
vfs:namecache:fullpath:hit - vn_fullpath1() successfully resolved a
search for the parent of an object using the namecache, passed the
discovered parent directory vnode pointer, name, and child vnode
pointer.
vfs:namecache:fullpath:miss - vn_fullpath1() failed to resolve a search
for the parent of an object using the namecache, passed the child
vnode pointer.
vfs:namecache:fullpath:return - vn_fullpath1() has completed, passed the
error number, and if that is zero, the vnode to resolve, and the
returned path.
vfs:namecache:lookup:hit - postive name cache entry hit, passed the
parent directory vnode pointer, name, and child vnode pointer.
vfs:namecache:lookup:hit_negative - negative name cache entry hit,
passed the parent directory vnode pointer and name.
vfs:namecache:lookup:miss - name cache miss, passed the parent directory
pointer and the full remaining component name (not terminated after the
cache miss component).
vfs:namecache:purge:done - name cache purge for a vnode, passed the vnode
pointer to purge.
vfs:namecache:purge_negative:done - name cache purge of negative entries
for children of a vnode, passed the vnode pointer to purge.
vfs:namecache:purgevfs - name cache purge for a mountpoint, passed the
mount pointer. Separate probes will also be invoked for each cache
entry zapped.
vfs:namecache:zap:done - name cache entry zapped, passed the parent
directory vnode pointer, name, and child vnode pointer.
vfs:namecache:zap_negative:done - negative name cache entry zapped,
passed the parent directory vnode pointer and name.
For any probes involving an extant name cache entry (enter, hit, zapp),
we use the nul-terminated string for the name component. For misses,
the remainder of the path, including later components, is provided as
an argument instead since there is no handy nul-terminated version of
the string around. This is arguably a bug.
MFC after: 1 month
Sponsored by: Google, Inc.
Reviewed by: jhb, kan, kib (earlier version)
Because the "c" input constaint is used, the compiler will already place
the MSR_FSBASE/MSR_GSBASE constants in ecx. Using __asm("ecx") makes
LLVM crash. Even though this is also an LLVM bug, we'd better remove the
unnecessary GCCism as well.
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
sharing of the nfssvc() system call between nfsserver and the nfsv4
server. Building of nfs_nfssvc.c will be committed later, at the time
the .c files in sys/nfsserver are updated. To do so now would result in
nfssvc() multiply defined.
Submitted by: rmacklem
Reviewed by: dfr
Approved by: kib (mentor)
- First three fields of system UUID may be little-endian as described in
SMBIOS Specification v2.6. For now, we keep the network byte order for
backward compatibility (and consistency with popular dmidecode tool)
if SMBIOS table revision is less than 2.6. However, little-endian format
can be forced by defining BOOT_LITTLE_ENDIAN_UUID from make.conf(5) if it
is necessary.
- Replace overly ambitious optimizations with more readable code.
- Update comments to SMBIOS Specification v2.6 and clean up style(9) bugs.
instead of just register one for the first adapter. Without doing this
there would be some data loss upon shutdown because data could be ignored
when flushing to disk.
MFC after: 3 days
- override_kernel_driver() has been removed since this is an
in-tree version of driver.
- __DATE__ and __TIME__ removed from version string to make
binary update builders happy.
- Utilize pause(9) for __FreeBSDversion >= 700033 (redo 167086).
- Utilize kproc_suspend_check() for __FreeBSDversion >= 800002.
(redo 172836).
- Don't read past end of pVDevice (redo 143787).
- Make sure that controller and channel are initialized (redo 169823).
- Don't include cam/cam_xpt_periph.h (redo 158177).
MFC After: 3 days
and update comments about original patches doing this and it not
working. It works for both the DL10019 and DL10022 based cards that I
have. It really helps the DL10019 cards, since they were using 8k
instead of the normal 16k that regular NE-2000 cards help.
# Note to self: need to provide a common routine to setup memory
# parameters.
more adequate TCP performance with IPv6.
Changes for IPv4, r166403 and r172795, both ignored the
IPv6 counterpart and left it in the state of art of year 2000.
The same logic in syncache already shares code between v4 and v6 so
things do not need to be adapted there.
Reported by: Steinar Haug (sthaug nethelp.no)
Tested by: Steinar Haug (sthaug nethelp.no)
MFC after: 3 days
DP8390-based cards have no generic way of reporting status of the link
or setting the media type. Some specific versions of these cards do,
however, allow for this, and we already support some of them. Make
the 'ed' experience more uniform by providing "autoselect" as the
meida and status "active" always. This won't affect the chips that
provide more specific details.
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
an NFS node including the access and attribute caches. Previously the NFS
client only purged any name cache entries associated with the file.
PR: kern/123755
Submitted by: Jaakko Heinonen jh of saunalahti fi
Reported by: Timo Sirainen tss of iki fi
Reviewed by: rwatson, rmacklem
MFC after: 1 month
