Commit Graph

56 Commits

Author SHA1 Message Date
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Pyun YongHyeon
57c81d92ae Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
Pyun YongHyeon
20e43c4aac If driver is not running, disable interrupts and do not try to
process received frames.  Previously it was possible to handle RX
interrupts even if controller is not fully initialized. This
resulted in non-working driver after system is up and running.

Reported by:	hselasky
Tested by:	hselasky
2011-05-31 18:45:15 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Pyun YongHyeon
4de89d86cd Reinitialize driver when MTU is changed and driver is running.
Reported by:	Huang, Yusheng ( yusheng.huang <> bluecoat com )
2011-01-24 17:53:58 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
John Baldwin
32341ad63c Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
Pyun YongHyeon
2f4fcd485d MCP55 is the only NVIDIA controller that supports VLAN tag
insertion/stripping and it also supports TSO over VLAN. Implement
TSO over VLAN support for MCP55 controller.

While I'm here clean up SIOCSIFCAP ioctl handler. Since nfe(4)
sets ifp capabilities based on various hardware flags in device
attach, there is no need to check hardware flags again in
SIOCSIFCAP ioctl handler. Also fix a bug which toggled both TX and
RX checksum offloading even if user requested either TX or RX
checksum configuration change.

Tested by:	Rob Farmer ( rfarmer <> predatorlabs dot net )
2010-11-17 18:09:02 +00:00
Pyun YongHyeon
b0630da9ad Plug memory leakage introduced in r215327.
Submitted by:	jkim
2010-11-15 22:05:08 +00:00
Pyun YongHyeon
7e7a45ce6f P5N32-SLI PREMIUM from ASUSTeK is known to have MSI/MSI-X issue
such that nfe(4) does not work with MSI-X. When MSI-X support was
introduced, I remember MCP55 controller worked without problems so
the issue could be either PCI bridge or BIOS issue. But I also
noticed snd_hda(4) disabled MSI on all MCP55 chipset so I'm still
not sure this is generic issue of MCP55 chipset. If this was PCI
bridge issue we would have added it to a system wide black-list
table but it's not clear to me at this moment whether it was caused
by either broken BIOS or silicon bug of MCP55 chipset.

To workaround the issue, maintain a MSI/MSI-X black-list table in
driver and lookup base board manufacturer and product name from the
table before attempting to use MSI-X. If driver find an matching
entry, nfe(4) will not use MSI/MSI-X and fall back on traditional
INTx mode. This approach should be the last resort since it relies
on smbios and if another instance of MSI/MSI-X breakage is reported
with different maker/product, we may have to get the PCI bridge
black-listed instead of adding an new entry.

PR:	kern/152150
2010-11-14 23:37:43 +00:00
Marius Strobl
efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
Pyun YongHyeon
603b8e29db Fix regression introduced in r215132. Caller always holds a driver
lock before accessing mii, so locking is not needed here.

Reported by:	Rob Farmer (rfarmer <> predatorlabs dot net)
2010-11-12 19:33:13 +00:00
Pyun YongHyeon
52a1393e4c Add basic WOL support for MCP ethernet controllers. It seems the
controller does not perform automatic switching from 1000Mbps link
to 10/100Mbps link when WOL is activated. Implement establishing
10/100Mps link with auto-negotiation in driver. Link status change
handler was modified to remove taskqueue based approach since driver
now needs synchronous handling for link establishment.

Submitted by:	Yamagi Burmeister (lists <> yamagi.org ) (initial version)
Tested by:	Yamagi Burmeister (lists <> yamagi.org )
MFC after:	1 week
2010-11-11 18:08:50 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Pyun YongHyeon
6da6d0a9e3 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
John Baldwin
e1b17582f4 Take a step towards removing if_watchdog/if_timer. Don't explicitly set
if_watchdog/if_timer to NULL/0 when initializing an ifnet.  if_alloc()
sets those members to NULL/0 already.
2009-11-06 14:55:01 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Pyun YongHyeon
767fb36c3a NVIDIA MCP controllers have no Rx buffer alignment restrictions.
Remove PAGE_SIZE alignment used in Rx buffer DMA tag creation. The
alignment restriction was used in old local jumbo allocator and
nfe(4) switched to UMA backed page allocator for jumbo frame.

This change should fix jumbo buffer allocation failure.

Reported by:	Pascal Braun ( pascal.braun <> continum dot net )
2009-05-25 00:56:01 +00:00
Pyun YongHyeon
69d6a6aafc Fix a typo.
Submitted by:	clemens fischer via Shigeaki Tagashira
2008-12-20 00:04:04 +00:00
Pyun YongHyeon
17d022beb2 Add hardware MAC statistics support. Register information was
obtained from Linux forcedeth driver.
While I'm here move creating a sysctl node for process_limit to
function nfe_sysctl_node().

Tested by:	"Arno J. Klaassen" < arno <at> heho dot snv dot jussieu dot fr >
2008-10-03 03:58:16 +00:00
Pyun YongHyeon
be38e61a52 Add device ids for MCP77/79 and set appropriate support flags.
Obtained from:  OpenBSD
PR:		kern/127529
2008-10-01 00:17:54 +00:00
Pyun YongHyeon
b7e548dc72 Add support for MCP73 chips.
Tested by:	"Daan Vreeken [PA4DAN]" ( Danovitsch AT vitsch DOT net )
MFC after:	1 week
2008-04-10 01:25:09 +00:00
Pyun YongHyeon
3a5d5a69ce Nuke local jumbo allocator and switch to use of UMA backed page
allocator for jumbo frame. Also remove unneeded jlist lock which
is no longer required to protect jumbo buffers.
With these changes jumbo frame performance of nfe(4) was slightly
increased and users should not encounter jumbo buffer allocation
failure anymore.
2008-03-06 01:47:53 +00:00
Poul-Henning Kamp
cf827063a9 Give MEXTADD() another argument to make both void pointers to the
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.

Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.

Likely break the only non-convetional user of the API, after informing
the relevant committer.

Update the mbuf(9) manual page, which was already out of sync on
this point.

Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.

This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.

This does not affect the memory layout or size of mbufs.

Parental oversight by:	sam and rwatson.

No MFC is anticipated.
2008-02-01 19:36:27 +00:00
John Baldwin
304a4c6fb1 - Retire npe_defrag(), gem_defrag(), msk_defrag(), nfe_defrag(), and
re_defrag() and use m_collapse() instead.
- Replace a reference to ath_defrag() in a comment in if_wpi.c with
  m_collapse().
2008-01-17 23:37:47 +00:00
Pyun YongHyeon
6a087a8722 Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
Sam Leffler
cbb1d39de7 use the private task q thread instead of the shared system thread
Reviewed by:	yongari
MFC after:	1 week
2007-11-16 15:51:47 +00:00
Pyun YongHyeon
144e07f0e7 Apparently some NVIDIA NICs store ethernet address in reverse order
while other variants have inorder ethernet address for the same
chipset. Override ethernet address ordering if we already know how
it was stored. This fixes the use of inversed ethernet address on
MCP67.

Submitted by:	ariff
MFC after:	3 days
2007-11-06 01:01:38 +00:00
Pyun YongHyeon
0142a9b171 During boot(before setting IP address) PHY can generate link state
change interrupt if the link is established with link parter. However
interrupt handler didn't acknowledge the interrupt if nfe(4) was not
running at the time of interrupt delivery. This caused endless
interrupt generation. Fix the bug by acknowledging the interrupt
regardless of running state of the driver.

PR:	kern/116295
Submitted by:	Mark Derbyshire (mark At taom dot com)
Approved by:	re (kensmith)
2007-09-14 05:12:25 +00:00
Pyun YongHyeon
50c55b295c Fix typo.
Pointed out:	marius
Approved by:	re (bmah)
2007-09-14 01:28:18 +00:00
Pyun YongHyeon
8b590ad2d1 Don't fail on device attach if jumbo frame support was unsuccessful.
Because nfe(4) hardware doesn't support SG on Rx path, supporting
jumbo frame requires very large contiguous kernel memory(i.e. several
mega bytes). In case of lack of contiguous kernel memory that
allocation request may always fail. However nfe(4) can operate on normal
sized MTU frames, so go ahead and just disable jumbo frame support.
While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable
jumbo frame support.
In nfe_poll, make sure to invoke correct Rx handler.

Approved by:	re (kensmith)
2007-07-24 01:11:00 +00:00
Pyun YongHyeon
a272ea16ed The maximum size of the sum of all segment lengths in a given DMA mapping
should be 65535 + link layer headers.

Pointed out by:	gallatin
2007-06-12 10:51:47 +00:00
Pyun YongHyeon
1c88901672 Increase a maximum segment size of DMA to 4096. Previously it used
MCLBYTES for the segment size but it used too many Tx descriptors in
TSO case.
While I'm here adjust maximum size of the sum of all segment lengths
in a given DMA mapping to 65535, the maximum size, in bytes, of a IP
packet.
2007-06-12 02:35:01 +00:00
Pyun YongHyeon
aab5582f0a Bring overhauled nfe(4) into tree.
o s/printf/device_printf/g
o Nuke OpenBSDism.
o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way
   to sync a single descriptor within a DMA map.)
o Remove recursive mutex.
o bus_dma(9) clean up.
o 40bit DMA address support.
o Add protection for Rx map load failure.
o Fix a long standing bug for watchdog timeout. [1]
o Add additional protections, missing Tx completion interrupt, losing
   start Tx command, for watchdog timeout.
o Switch to taskqueue(9) API to handle interrupts.
o Use our own timer for watchdog instead of if_watchdog/if_timer
   interface.
o Advertise VLAN header length/capability correctly to upper layer.
o Remove excessive kernel stack consumption in nfe_encap().
o Handle highly fragmented mbuf chains correctly.
o Enable etherenet address reprogramming with ifconfig(8).
o Add ALTQ/TSO, MSI/MSIX support.
o Increased Rx ring to 256 descriptors from 128.
o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary.
o Remove alignment restrictions on Tx/Rx buffers.
o Rewritten jumbo frame support code.
o Add support for hardware assistend VLAN tag insertion/stripping.
o Add support for Tx/Rx flow control based on patches from Peer Chen. [2]
o Add a routine that detects whether ethernet address swap routines is
   required. [3]
o Add a workaround that take MAC/PHY out of power down mode.
o Add suspend/resume support.
o style(9) and code clean up.

Special thanks to Shigeaki Tagashira, the original porter of nfe(4),
who submitted lots of patches, performed uncountable number of
regression tests and maintained nfe(4) for a long time. Without his
enthusiastic help and support I could never have completed this
overhauling task.

The only weak point of nfe(4) compared to nve(4) is instability of
manual half-duplex media selection on certain hardwares(auto sensing
media type should work for all cases, though). This was a long
standing bug of nfe(4) and I still have no idea why it doesn't work
on some hardwares.

Obtained from:	OpenBSD [1]
Submitted by:	Peer Chen < pchen at nvidia dot com > [2], [3]
Reviewed by:	Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp >
Tested by:	Shigeaki Tagashira, current
Discussed with:	current
Silence from:	obrien
2007-06-12 02:16:02 +00:00
Christian S.J. Peron
59a0d28bac Catch up the rest of the drivers with the ether_vlan_mtap modifications.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.

It should be noted that this is compiled tested only.

MFC after:	3 weeks
2007-03-04 03:38:08 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
David E. O'Brien
7597761a50 Fix TX/RX checksum offload.
Submitted by:	Peer Chen at nVIDIA
2006-11-27 04:47:27 +00:00
David E. O'Brien
30ce3a1229 Reformat to KNF after revision 1.12. 2006-11-27 00:23:59 +00:00
David E. O'Brien
6124fe214e Fix the jumbo frame support.
Submitted by:	Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
David E. O'Brien
a0f9e922a7 Grrr. new .vimrc file is really giving me trouble.. get the whitespace right. 2006-11-27 00:10:00 +00:00
David E. O'Brien
96058696ac Fix editor fatfingering in rev 1.9. 2006-11-27 00:05:18 +00:00
David E. O'Brien
9565e1fac5 nfe_stop() requires lock to be held when calling. 2006-11-26 23:11:53 +00:00
David E. O'Brien
9ae2249db2 Missed two nits in rev 1.7. 2006-11-17 16:49:40 +00:00
David E. O'Brien
f220c6a2f9 style(9) 2006-10-19 10:04:46 +00:00
David E. O'Brien
2c3adf6127 style(9) cleanup. 2006-10-19 10:01:26 +00:00
David E. O'Brien
3cb32d8ab3 Correct the WOL magic value.
Submitted by:	Peer Chen at nVIDIA
2006-10-16 20:33:23 +00:00