Commit Graph

18 Commits

Author SHA1 Message Date
John Baldwin
f140aad88c More consistent whitespace. 2009-11-11 20:29:40 +00:00
John Baldwin
58fbe5ab67 Use a dedicated callout to drive the transmit watchdog timer instead of
using if_watchdog and if_timer.

Tested by:	gavin
2009-11-11 20:27:53 +00:00
Warner Losh
37c3e5226c In bwi_newstate, only zero the bssid when we stop a STA. And only
when we've not stopped the card.  It hangs the system when we touch
the CSR after bwistop.

This fixes the hanging on kldunload.
2009-06-02 16:48:10 +00:00
Warner Losh
07db17ce56 Move the unlock to after the ifdef (maybe the right fix is to remove
the ifdef) since it calls bwi_start_locked, which expects to the lock
to be held...
2009-06-01 16:29:03 +00:00
Warner Losh
7389f7db05 Make sure that we drain the LED blinking callout on detach.
Submitted by:	Paul B. Mahol
2009-06-01 16:27:13 +00:00
Warner Losh
1771d2075a Add a comment about what may be happening when we get certain
messages.  No change to actual code.
2009-06-01 16:22:01 +00:00
Sam Leffler
c5f5009be6 fix typo 2009-05-30 01:33:05 +00:00
Sam Leffler
515db61d2b validate tx rate(s) in the raw xmit path
Tested by:	"Paul B. Mahol" <onemda@gmail.com> (rum, bwi)
2009-05-29 23:41:31 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Warner Losh
f4fcd5ddec Remove unnecessary comments. 11A read/write is the same: its just the
classic indirect register dance.

Submitted by:	ddkprog at yahoo not com
2009-05-18 15:46:34 +00:00
Warner Losh
b16a8a5859 Fix a typo from the original driver. We need to write ctrl2 into RF
register 0x52, not ctrl1.  This appears to be a mistake in the bcm
reverse engineering page, and has been corrected there.  Tracing
through the code, this is more in keeping with the "documented"
register. Sephe thinks it looks interesting and may be worth
fixing. :)

Submitted by:	ddkprog at yahoo com
Reviewed by:	Sepherosa Ziehau
2009-05-18 15:31:26 +00:00
Warner Losh
e9902ec0a6 Correct types of PHY, per http://bcm-specs.sipsolutions.net/PHYVersioning
# Note: The driver doesn't support either these PHY types, so this is
# effectively a nop.

Submitted by:	"ddk"
Obtained from:	http://paradox.lissyara.su/bwi.diff
2009-05-18 01:07:38 +00:00
Warner Losh
e9d57f2fd1 Turns out that my BCM4318 has a PCI ID of 0x4319, which lead me to
believe it was a BCM4319.  However, it is the a/b/g variation of the
BCM4318.  The chip itself is labelled BCM4318EKFBG, and the board is
BCM94318MKABG.

Paradox's patch includes the type of 802.11 wireless for each card,
but changes all the names (I don't think the latter is quite right).
Import that part of the patch, but keep the current set of BCM names
(with a minor tweak for the 4306 ones). I'll need to verify them via
some other means.

Obtained from:	http://paradox.lissyara.su/bwi.diff (partially)
2009-05-18 01:00:11 +00:00
Warner Losh
16dcc9ce77 Cleanup module declarations:
Use "bwi" consistently
	No need to have separate cardbus attachment
	No need to declare a module version
2009-05-15 16:38:42 +00:00
Nathan Whitehorn
8553eea5ce Add a comment to motivate my last change.
Suggested by:	sam, imp
2009-05-13 16:19:05 +00:00
Nathan Whitehorn
0a594d9ecc Add a short delay after programming PHY registers to give some time for
the engine to catch up. This prevents a machine check exception from
illegal memory requests with a BCM4318.
2009-05-13 14:25:55 +00:00
Warner Losh
d83d76df1f Update a few XXX comments
Submitted by:	ddk ddk ddkprog at yahoo dot com
2009-05-11 17:13:52 +00:00
Warner Losh
12e36acb09 Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets.  This driver uses the v3 firmware that
needs to be fetched separately.  A port will be committed to create
the bwi firmware module.

The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319

The driver works for 802.11b and 802.11g.

Limitations:
	This doesn't support the 802.11a or 802.11n portion of radios.
	Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
	Documenation for this firmware is reverse engineered from
		 http://bcm.sipsolutions.net/
	V4 of the firmware is needed for 11a or 11n support
		 http://bcm-v4.sipsolutions.net/
	Firmware needs to be fetched from a third party, port to be committed

# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.

Obtained from:	DragonFlyBSD, //depot/projects/vap
Reviewed by:	sam@, thompsa@
2009-05-03 04:01:43 +00:00