rest of file.
This has the additional side-effect of removing a C++ reserved keyword
from this file, which prevents the Click Modular Router's FreeBSD
kernel support from building.
Reviewed by: silence on -current
of a tap(4) instance, if IFF_PROMISC is not set.
In tap(4), we should emulate the effect IFF_PROMISC would have on
hardware, otherwise we risk introducing layer 2 loops if tap(4) is
used with bridges. This means not even bpf(4) gets to see them.
This patch has been tested in a variety of situations. Multicast and
broadcast frames are correctly allowed through. I have observed this
behaviour causing problems with multiple QEMU instances hosted on
the same FreeBSD machine.
The checks in in ether_demux() [if_ethersubr.c, rev 1.222, line 638]
are insufficient to prevent this bug from occurring, as ifp->if_vlantrunk
will always be NULL for the non-vlan case.
MFC after: 3 weeks
PR: 86429
Submitted by: Pieter de Boer (with changes)
via a new -c flag to be used with -l. Some simple parsing code is
present for the following capabilities: Power Management, AGP, VPD,
MSI, PCI-X, HyperTransport, Vendor-specific, EHCI Debug Port, PCI-PCI
bridge subvendor ID, PCI-express, and MSI-X.
- Fix a few warnings in pciconf.c.
- Update some cruft in pciconf(8):
- PCI 2.1 is no longer a revolutionary standard, and subvendor ID's are
fairly common at this point, so reflect that.
- Header type 2 is used for PCI-CardBus bridges.
- Describe the -v option for -l after completing the basic -l description
instead of disrupting the flow in the middle.
Reviewed by: imp (partially)
MFC after: 1 week
socket option TCP_INFO.
Note that the units used in the original Linux API are in microseconds,
so use a 64-bit mantissa to convert FreeBSD's internal measurements
from struct tcpcb from ticks.
world order:
mount -t linsysfs linsys /compat/linux/sys
instead of mount_linsysfs. Now that 6.X requires mount_linsysfs to
work. This is why there is a mount_linsysfs in 6.X and not in -current.
Prompted by: ru
Reviewed by: ru, rodrigc
/usr/share/examples/etc/bsd-style-copyright. I've fixed a
few minor wording and formatting differences.
Approved by: luigi, Hannu Savolainen <hannu@opensound.com>
Formulas described in RFC require high precision of floating point.
Formulas of integer math implemented in ng_pptpgre give mistake in range
of +0-7ms on RTT and +0-3ms on deviation. This leads to significant
underestimation of real packet RTT.
I have made a very simple patch to reduce mistake to +4-3ms on RTT and
+2-1ms on deviation. Mistake in RTT is not good, but gets covered by
deviation. To cover worst possible negative mistake in deviation I have
added 2ms to it. Also this 2 ms cover the case when measured deviation
is so small (about zero) that it can interfere with process scheduling
delays or weather on Mars.
My tests show decreasing of packet losses on 20ms RTT link from 2.5% to
0.3% while speed increased un 1/3.
Reviewed by: archie
multicast memberships, when interface is detached. Thus, when
an underlying interface is detached, we do not need to free
our multicast memberships.
Reviewed by: bms
Normally the socket buffers are static (either derived from global
defaults or set with setsockopt) and do not adapt to real network
conditions. Two things happen: a) your socket buffers are too small
and you can't reach the full potential of the network between both
hosts; b) your socket buffers are too big and you waste a lot of
kernel memory for data just sitting around.
With automatic TCP send and receive socket buffers we can start with a
small buffer and quickly grow it in parallel with the TCP congestion
window to match real network conditions.
FreeBSD has a default 32K send socket buffer. This supports a maximal
transfer rate of only slightly more than 2Mbit/s on a 100ms RTT
trans-continental link. Or at 200ms just above 1Mbit/s. With TCP send
buffer auto scaling and the default values below it supports 20Mbit/s
at 100ms and 10Mbit/s at 200ms. That's an improvement of factor 10, or
1000%. For the receive side it looks slightly better with a default of
64K buffer size.
New sysctls are:
net.inet.tcp.sendbuf_auto=1 (enabled)
net.inet.tcp.sendbuf_inc=8192 (8K, step size)
net.inet.tcp.sendbuf_max=262144 (256K, growth limit)
net.inet.tcp.recvbuf_auto=1 (enabled)
net.inet.tcp.recvbuf_inc=16384 (16K, step size)
net.inet.tcp.recvbuf_max=262144 (256K, growth limit)
Tested by: many (on HEAD and RELENG_6)
Approved by: re
MFC after: 1 month
upper-bounding it to the size of the initial socket buffer lower-bound it
to the smallest MSS we accept. Ideally we'd use the actual MSS information
here but it is not available yet.
For socket buffer auto sizing to be effective we need room to grow the
receive window. The window scale shift is determined at connection setup
and can't be changed afterwards. The previous, original, method effectively
just did a power of two roundup of the socket buffer size at connection
setup severely limiting the headroom for larger socket buffers.
Tested by: many (as part of the socket buffer auto sizing patch)
MFC after: 1 month
cannot change (because its referenced by curthread). This fixes
a LOR caused by acquiring emul_shared_lock while holding emul_lock.
Fix typo in comment.
Submitted by: rdivacky
p->p_emuldata is properly initialized in the time when the child can run.
Do not set p->p_emuldata to NULL when the process is exiting.
It does not make any sense and only costs 2 mutex operations.
Do not lock emul_data to unlock it on the very next line.
Comment on possible race while there.
Reparent all procs that are part of a threading group but not its leaders
to init and SIGCHLD init to finish the zombies off. This fixes zombies
left after opera's exit. [1]
There is no need to lock p_em in the linux_proc_init CLONE_THREAD
case because the process cannot change the address of the p_em->shared
because its currently running this code path.
Move assigning of em->shared outside emul_shared_lock.
Noticed by: Scott Robbins <scottro@nyc.rr.com> [1]
Submitted by: rdivacky
