tries to drop the reference count after our close routine returns.
A more correct fix is to defer the destroy_dev() to a taskqueue(either
in devfs or locally).
Reminded by: jhb
addressing if a packet is later re-encapsulated and sent to a
non-broadcast, non-multicast destination after being received on the
ng_ksocket input hook.
PR: 106999
Submitted by: Kevin Lahey
MFC after: 4 weeks
device specific d_close(), which makes subsequent destroy_dev() being
blocked in the "devdrn" loop.
This bandaid should fix the smbfs hang/crashing observed on -CURRENT since
the introduction of sys/kern/kern_conf.c:1.199:
# mount_smbfs -I server //server/share /mnt
Password:
[hang]
Reviewed by: bp
See also: http://lists.freebsd.org/pipermail/cvs-src/2006-November/071379.html
by the token bucket filter will result in EINVAL being returned.
If you want to rate-limit traffic in future, use ALTQ or dummynet; this
isn't a general purpose QoS engine.
Preserve the now unused fields in struct vif so as to avoid having to
recompile netstat(1) and other tools.
Reviewed by: Pavlin Radslavov, Bill Fenner
Bugfix for the Realtek PHY driver... an RTL8201L standalone PHY
needs different handling than the integrated ones in terms of
speed detection. There was a bogus test based on the parent
device driver name string controlling which speed register to
query. That test began failing when the rl driver was split into
separate rl and re drivers some time ago. Apparently nobody ever
noticed because the buggy code only executes if NWAY negotiation
failed. Since we happen to be testing with an ancient dumb hub
rather than a modern switch, we found it.
To fix it all, have the attach() routine notice whether we're
dealing with an integrated PHY or an RTL8201L and store that info
in a struct accessible to the status() routine that needs to know
which register to query.
I touched up the fixes because they were relative to RELENG_6 and to
bring a few nits into line with style(9).
MFC After: 2 weeks
Submitted by: Ian Lepore
tunable allowing automatic parsing of VPD data to be disabled. The
default is left as-is; if you are having problems with hard hangs at boot
due to VPD, try setting hw.pci.enable_vpd=0. A proper architectural
solution has been under discussion for some time, but this allows me to
boot my test machines in the mean time.
Submitted by: bz
Head nod: jmg
- Fix these types in ULE as well. This fixes bugs in priority index
calculations in certain edge cases. (int)-1 % 64 != (uint)-1 % 64.
Reported by: kkenn using pho's stress2.
partitioning class that supports multiple schemes. Current
schemes supported are APM (Apple Partition Map) and GPT.
Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM
and GEOM_PART_GPT (resp).
The ctlreq interface supports verbs to create and destroy
partitioning schemes on a disk; to add, delete and modify
partitions; and to commit or undo changes made.
- Restore support for fetching swap information from crash dumps via
kvm_get_swapinfo(3) to fix pstat -T/-s on crash dumps.
Reviewed by: arch@, phk
MFC after: 1 week
never used them; with mrouted, their functionality may be replaced by
explicitly configuring gif(4) instances and specifying them with the
'phyint' keyword.
Bump __FreeBSD_version to 700030, and update UPDATING.
A doc update is forthcoming.
Discussed on: net
Reviewed by: fenner
MFC after: 3 months
the value of p_textvp. This way, we always unlock the locked vnode.
While there, vhold() the vnode around the vn_lock().
Reported and tested by: Guy Helmer (ghelmer palisadesys com)
Approved by: des (procfs maintainer)
MFC after: 1 week
variable to avoid invalid constraints in dead code. Use an array of
u_char's (inside a struct) instead of a char/short/int/long variable so
that the variable and its accesses can be spelled in the same way in all
cases and code doesn't need to be cloned just to hold the spelling
differences.
Fixed strict-aliasing errors in PCPU_SET() and in the amd64 PCPU_GET().
Cast to (void *) as in rev.1.37 of the i386 version where the errors
were fixed for the i386 PCPU_GET() only. It would be more correct to
copy to and from the temp. variable using memcpy(), but then an
ifdef tangle would be required to ensure using the builtin memcpy().
We depend on fairly aggressive optimization to put the temp. variable
only in a register despite it being copied using
*(type *)(void *)&anothertype and could depend on this when using
memcpy() too. This seems to work right even for -O0, but the -O0 case
has not been completely tested.
This change gives identical object code for all object files in LINT
on amd64 (except for one file with a __TIME__ stamp). For LINT on
i386 it gives unimportant differences in instruction order and padding
in a few object files. This was only tested for -O.
This change (actually a previous version of it) gives the following
reductions in the number of object files in LINT that fail to compile
with -O2 but without the -fno-strict-aliasing kludge:
- amd64: 29 (down from 211)
- i386: 36 (down from 47)
gcc-3.4.6 actually allows the invalid constraints that result from not
using the temp. variable, at least with -O[1-2], but gcc-3.3.3 crashes
on them and I don't want to depend on compiler bugs.
avoid holding the UNIX domain socket subsystem lock over soooptcopyin()
and sooptcopyout(). This problem was introduced when LOCAL_CREDS, and
LOCAL_CONNWAIT support were added.
Reviewed by: mdodd
LABEL_TO_SLOT() macro used by policy modules to query and set label data
in struct label. Instead of using a union, store an intptr_t, simplifying
the API.
Update policies: in most cases this required only small tweaks to current
wrapper macros. In two cases, a single wrapper macros had to be split into
separate get and set macros.
Move struct label definition from _label.h to mac_internal.h and remove
_label.h. With this change, policies may now treat struct label * as
opaque, allowing us to change the layout of struct label without breaking
the policy module ABI. For example, we could make the maximum number of
policies with labels modifiable at boot-time rather than just at
compile-time.
Obtained from: TrustedBSD Project
Don't perform a nested include of _label.h in mac.h, as mac.h now
describes only the user API to MAC, and _label.h defines the in-kernel
representation of MAC labels.
Remove mac.h includes from policies and MAC framework components that do
not use userspace MAC API definitions.
Add _KERNEL inclusion checks to mac_internal.h and mac_policy.h, as these
are kernel-only include files
Obtained from: TrustedBSD Project
sleep lock missed the witness code, and the system will panic
immediately on boot if WITNESS is enabled.
Changed the witness definition to the new type.
register takes 16 characters (64-bit register in hex). In practice this
is a slight bit of overkill as 7 of the 56 registers are only 32-bit, but
having the buffer too small results in remote kgdb trashing kernel memory
when it connects.
PR: amd64/108673
Submitted by: Ravi Murty, Nikhil Rao @ Intel
MFC after: 3 days
that of the tun instance even for the !AF_INET case, and properly
remove configured addresses by calling if_purgeaddrs().
Maintain the TUN_DSTADDR behaviour for compatibility with the OS/390
emulator.
MFC after: 3 weeks
PR: 100080
Reviewed by: bz
The patch from the PR was a little outdated w/regards to the
Vodafone vendor string.
PR: kern/106033
Submitted by: Volker Werth <volker_AT_vwsoft.com>
MFC in: 3 days
Make devfs cloning a sysctl/tunable which defaults to on.
If devfs cloning is enabled, only the super-user may create
tun(4)/tap(4)/vmnet(4) instances. Devfs cloning is still enabled by
default; it may be disabled from the loader or via sysctl with
"net.link.tap.devfs_cloning" and "net.link.tun.devfs_cloning".
Disabling its use affects potentially all tun(4)/tap(4) consumers
including OpenSSH, OpenVPN and VMware.
PR: 105228 (potentially also 90413, 105570)
Submitted by: Landon Fuller
Tested by: Andrej Tobola
Approved by: core (rwatson)
MFC after: 4 weeks
to set_controller_command_byte() call; by issueing a Read Mode Byte
command, the touchpad is in Absolute Mode again.
This problem occursed at least on Asus V6V laptops.
approval, change the copyright statement to point at him instead of
"FreeBSD, Inc".
Encouraged by: rwatson
Reviewed by: imp
Discussed with and approved by: orion
a user or group, when the kernel first sees this, it will update
the grace time value. However, it never flags the quota as modified
and the updated value never makes it to the quota data file unless
the user actually makes some other change that would write the
data out.
Fixed to flag the quota as modified if the soft limit has actually
been reached and should be now enforced.
description here. The fix in the PR isn't necessary at all for memory
leaks, but we weren't setting the device description.
While I'm here, remove some of the obfuscating macros in attach.
PR: 108719
PR/108719, but there's a simpler fix: free it after it is used, and
then get rid of the redundant frees this causes. Other leaks in this
PR not yet fixed.
While I'm here, remove NetBSD/OpenBSD code and some of the portability
#defines that were getting in the way of understanding this code. The
devinfo bug was harder to spot because one needed to know that
device_set_desc_copy() was used inside of one of them (one that didn't
take an argument!).
Prefer device_printf(sc->sc_dev, "...") to printf("%s:...",
device_get_nameunit(sc->sc_dev)). This saves almost 300 bytes.
PR: 108719
Submitted by: Antoine Brodin
rest of file.
This has the additional side-effect of removing a C++ reserved keyword
from this file, which prevents the Click Modular Router's FreeBSD
kernel support from building.
Reviewed by: silence on -current
of a tap(4) instance, if IFF_PROMISC is not set.
In tap(4), we should emulate the effect IFF_PROMISC would have on
hardware, otherwise we risk introducing layer 2 loops if tap(4) is
used with bridges. This means not even bpf(4) gets to see them.
This patch has been tested in a variety of situations. Multicast and
broadcast frames are correctly allowed through. I have observed this
behaviour causing problems with multiple QEMU instances hosted on
the same FreeBSD machine.
The checks in in ether_demux() [if_ethersubr.c, rev 1.222, line 638]
are insufficient to prevent this bug from occurring, as ifp->if_vlantrunk
will always be NULL for the non-vlan case.
MFC after: 3 weeks
PR: 86429
Submitted by: Pieter de Boer (with changes)
socket option TCP_INFO.
Note that the units used in the original Linux API are in microseconds,
so use a 64-bit mantissa to convert FreeBSD's internal measurements
from struct tcpcb from ticks.
/usr/share/examples/etc/bsd-style-copyright. I've fixed a
few minor wording and formatting differences.
Approved by: luigi, Hannu Savolainen <hannu@opensound.com>
Formulas described in RFC require high precision of floating point.
Formulas of integer math implemented in ng_pptpgre give mistake in range
of +0-7ms on RTT and +0-3ms on deviation. This leads to significant
underestimation of real packet RTT.
I have made a very simple patch to reduce mistake to +4-3ms on RTT and
+2-1ms on deviation. Mistake in RTT is not good, but gets covered by
deviation. To cover worst possible negative mistake in deviation I have
added 2ms to it. Also this 2 ms cover the case when measured deviation
is so small (about zero) that it can interfere with process scheduling
delays or weather on Mars.
My tests show decreasing of packet losses on 20ms RTT link from 2.5% to
0.3% while speed increased un 1/3.
Reviewed by: archie
multicast memberships, when interface is detached. Thus, when
an underlying interface is detached, we do not need to free
our multicast memberships.
Reviewed by: bms
Normally the socket buffers are static (either derived from global
defaults or set with setsockopt) and do not adapt to real network
conditions. Two things happen: a) your socket buffers are too small
and you can't reach the full potential of the network between both
hosts; b) your socket buffers are too big and you waste a lot of
kernel memory for data just sitting around.
With automatic TCP send and receive socket buffers we can start with a
small buffer and quickly grow it in parallel with the TCP congestion
window to match real network conditions.
FreeBSD has a default 32K send socket buffer. This supports a maximal
transfer rate of only slightly more than 2Mbit/s on a 100ms RTT
trans-continental link. Or at 200ms just above 1Mbit/s. With TCP send
buffer auto scaling and the default values below it supports 20Mbit/s
at 100ms and 10Mbit/s at 200ms. That's an improvement of factor 10, or
1000%. For the receive side it looks slightly better with a default of
64K buffer size.
New sysctls are:
net.inet.tcp.sendbuf_auto=1 (enabled)
net.inet.tcp.sendbuf_inc=8192 (8K, step size)
net.inet.tcp.sendbuf_max=262144 (256K, growth limit)
net.inet.tcp.recvbuf_auto=1 (enabled)
net.inet.tcp.recvbuf_inc=16384 (16K, step size)
net.inet.tcp.recvbuf_max=262144 (256K, growth limit)
Tested by: many (on HEAD and RELENG_6)
Approved by: re
MFC after: 1 month
upper-bounding it to the size of the initial socket buffer lower-bound it
to the smallest MSS we accept. Ideally we'd use the actual MSS information
here but it is not available yet.
For socket buffer auto sizing to be effective we need room to grow the
receive window. The window scale shift is determined at connection setup
and can't be changed afterwards. The previous, original, method effectively
just did a power of two roundup of the socket buffer size at connection
setup severely limiting the headroom for larger socket buffers.
Tested by: many (as part of the socket buffer auto sizing patch)
MFC after: 1 month
cannot change (because its referenced by curthread). This fixes
a LOR caused by acquiring emul_shared_lock while holding emul_lock.
Fix typo in comment.
Submitted by: rdivacky
p->p_emuldata is properly initialized in the time when the child can run.
Do not set p->p_emuldata to NULL when the process is exiting.
It does not make any sense and only costs 2 mutex operations.
Do not lock emul_data to unlock it on the very next line.
Comment on possible race while there.
Reparent all procs that are part of a threading group but not its leaders
to init and SIGCHLD init to finish the zombies off. This fixes zombies
left after opera's exit. [1]
There is no need to lock p_em in the linux_proc_init CLONE_THREAD
case because the process cannot change the address of the p_em->shared
because its currently running this code path.
Move assigning of em->shared outside emul_shared_lock.
Noticed by: Scott Robbins <scottro@nyc.rr.com> [1]
Submitted by: rdivacky
buffer resizing, etc.) that was here since eon. Free all (unmanaged)
allocated buffer through sndbuf_destroy() in case we forgot to call
sndbuf_free(). For a managed buffer (mostly hw specific managed buffer),
either provide CHANNEL_FREE() method with appropriate return value to
invoke semi-automatic sndbuf_free() or simply do it on their own. If
everything is failed, sndbuf_destroy() will come to the rescue as a
final measure.
MFC after: 3 days
This should fix the run time bustage observed on recent -CURRENT whilst
mounting a MSDOS filesystem with non-default locale/code page:
link_elf: symbol msdosfs_fileno_free undefined
KLD msdosfs_iconv.ko: depends on msdosfs - not available
using the callers UID instead of the GID when performing group
operations. This could allow users to determine group quota
information for groups they are not a member of in some cases.
Rename the "uid" parameter in ufs_quotactl to "id" to better show
that it is used for more than just the uid, and to be more in line
with the naming conventions in the other quota routines.
PR: kern/33940
for pci_cfg_restore() to be exported. It was tested using a
hackily accessed pci_cfg_restore().
- Add ifmedia_removeall() to mxge_detach() in order to stop leaking
an ifaddr
- Fix a small acounting bug introduced by the locking code shuffle
which could cause spurious watchdog resets now that we have a
watchdog.
Sponsored by: Myricom
locking in preparation for adding a watchdog handler (callouts must
not use sleepable locks). This required shuffling memory and
interrupt allocation to the attach routine rather than if_ioctl so as
to avoid potential sleeps while bringing up the interface.
This is not a functional change.
IN_LINKLOCAL() tests if an address falls within the IPv4 link-local prefix.
IN_PRIVATE() tests if an address falls within an RFC 1918 private prefix.
IN_LOCAL_GROUP() tests if an address falls within the statically assigned
link-local multicast scope specified in RFC 2365.
IN_ANY_LOCAL() tests for either of IN_LINKLOCAL() or IN_LOCAL_GROUP().
As with the existing macros in the FreeBSD netinet stack, comparisons
are performed in host-byte order.
See also: RFC 1918, RFC 2365, RFC 3927
Obtained from: NetBSD (dyoung@)
MFC after: 2 weeks
- initialize ifq_drv_maxlen correctly
- mark the interface as jumbo capable
- keep stats on the number of times the hw transmit queue filled and
was restarted.
#ifdef MSDOSFS_LARGE to run-time checks to see if "-o large" was specified.
Test case provided by Oliver Fromme:
truncate -s 200G test.img
mdconfig -a -t vnode -f test.img -u 9
newfs_msdos -s 419430400 -n 1 /dev/md9 zip250
mount -t msdosfs /dev/md9 /mnt # should fail
mount -t msdosfs -o large /dev/md9 /mnt # should succeed
PR: 105964
Requested by: Oliver Fromme <olli lurza secnetix de>
Tested by: trhodes
MFC after: 2 weeks
SOCK_DGRAM (i.e. UDP), respect the value configured earlier. This allows
TCP NFS root mounts using e.g. the boot.nfsroot.options="tcp" tunable.
In this case some of the connection parameters like the retry timer were
previously set appropriately for TCP but inappropriately for the UDP
socket that was actually used, leading to e.g. extremely long recovery
times (O(hours)) after a nfs server reboot.
Reviewed by: mohans
MFC After: 2 weeks
/usr/share/examples/etc/bsd-style-copyright. I've fixed a
few minor wording and formatting differences.
Approved by: matk, Hannu Savolainen <hannu@opensound.com>
Reviewed by: imp
We can't bind to a CPU which is not yet on-line, so add code that wait for
CPUs to go on-line before binding to them.
Reported by: Alin-Adrian Anton <aanton@spintech.ro>
MFC after: 2 weeks
configured and that in turn controls the descriptor layout; the rate
control module has no business peeking inside the descriptor but until
we can change the api so the driver records the tx rates and passes
them deal with it
unsolicited pin sense event and need manual control to turn off speaker
volume while attaching headphone.
Tested by: Ingeborg Hellemo <Ingeborg.Hellemo@cc.uit.no>
Disable global Acer + ALC883 headphone automute settings since there are
few models that does not respect this and causing broken behaviour.
Reported/Tested by: Pavel Argentov <argentoff@rtelekom.ru>
When the disk has an error, it will now print SMART
instead of 'Unknown CMD'.
PR: kern/93368
Submitted by: Garry Belka <garry at NetworkPhysics dot COM>
Approved by: sos
firmware in that module (eventhough this is a programming error) - drop the
reference to the module again.
Submitted by: Benjamin Close
MFC after: 3 days
the space allocated for the double fault handler since this space
is otherwise unused till the time a double fault occurs.
This change should have been committed alongside r1.127 of
"exception.S", but I somehow missed doing so.
Problem reported by: jeff
Pointy hat to: jkoshy
not used in any of our code. Also remove explicit padding variable that
kept the bpf_d structure the same size before and after the change in
select implementation, since binary compatibility is not required for this
data structure on 7-CURRENT.
IPv6 over point-to-point gif(4) tunnels.
These revisions caused a host route to the destination of a
point-to-point gif(4) interface to not get installed when the interface
and destination addresses were assigned. This caused
"no route to host" errors when trying to send traffic over the
interface. The first packet arriving inbound over the tunnel,
however, would cause the correct route to get installed, allowing
subsequent outbound traffic to be routed correctly.
gif(4) interfaces with prefix lengths of less than 128 bits
(i.e. no explicit destination address assigned) were not affected
by this bug.
This bug fix is a possible candidate for a 6.2-RELEASE errata note.
Approved by: jhay (original committer)
Discussed with: jhay, JINMEI Tatuya
MFC after: 3 days
blade systems, such as the Dell 1955 and the Intel SBXD132.
Development hardware for this work was provided by Broadcom and iXsystems.
A SBXD132 blade for testing was provided by Iron Systems.
is replaced with BSD gzip, let's make it possible to
distinguish between the two with a __FreeBSDversion bump,
just in case some developers want it.
Suggested by: linimon
