Notable upstream pull request merges:
#12321 Fix inflated quiesce time caused by lwb_tx during zil_commit()
#13244 zstd early abort
#13360 Verify BPs as part of spa_load_verify_cb()
#13452 More speculative prefetcher improvements
#13466 Expose zpool guids through kstats
#13476 Refactor Log Size Limit
#13484 FreeBSD: libspl: Add locking around statfs globals
#13498 Cancel in-progress rebuilds when we finish removal
#13499 zed: Take no action on scrub/resilver checksum errors
#13513 Remove wrong assertion in log spacemap
Obtained from: OpenZFS
OpenZFS commit: b9d98453f9
When reading the UEFI memory map we pass in a pointer to the memory to
hold the map. Unfortunately it wasn't initialised before the first use
so clang decided it was undefined behaviour so the entire loop was
removed. This leads to everything in bi_load after this to also be
removed as dead code.
The next function after bi_load in the binary is efi_copy_init. The
above caused us to enter efi_copy_init with a return address of the
start of the function. Because of this it would enter an infinite
loop of calling the function, allocating memory, then returning to
the start of the function.
PR: 264021
head_errlog is new format for errlog, but we do not really
use errlog, so we can just mark it supported, to enable reading
from pool.
MFC after: 1 week
Move declarations into a new nvlist.h rather than putting everything in
libzfs.h. This makes this nvlist code easier to reuse elsewhere. In
particular, the nvlist implementation in sys/contrib/libnv does not
provide XDR encoding, but this is needed when reading from or writing to
ZFS pools.
Also:
- Remove references to boolean_t. It has to be a 32-bit int here, so
just reference the underlying type.
- Add includes needed when compiling the nvlist code outside of stand/.
No functional change intended.
Reviewed by: tsoome
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35255
When adding an entry to an nvlist, the data buffer might need to be
resized. When this happens, the XDR encoder's notion of the buffer size
also needs to be updated, otherwise the operation may erroneously fail.
Reviewed by: tsoome, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35254
The loader.efi man page describes UEFI-specific loader details, but not
general loader information.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Get amd64 compiling. However, the current kboot supports an old way of
enumerating memory and the new way needs to be incorporated as well. The
powerpc folks could use either, it seems and newer powerpc platforms
need some changes for kboot to work anyway.
This commit includes the linker script, trampoline code to start the new
kernel, Linux system calls and the necessary configuration glue needed
to build the binaries.
This includes a quick hack to get multiboot support, but we need to
really share these defines. The multiiboot2.h is the minimum needed to
build. We have multiboot information in three places now, so a
refactoring is in order.
This should be considered, at best, preliminary and experimental for
anybody wishing to try it out.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35100
Turns out there is a libsa.3. It's a bit out of date, but we reference
it in a number of places so we should install it. We need to do the DO32
dance because this Makefile is included twice and we don't want it
installing twice.
Sponsored by: Netflix
This mirrors dmu_read_impl(), zeroing out the tail end of the buffer and
clipping the read to what's contained by the block that exists.
This fixes an issue that arose during the 13.1 release process; in
13.1-RC1 and later, setting up GELI+ZFS will result in a failure to
boot. The culprit is this, which causes us to fail to load geom_eli.ko
as there's a residual portion after the single datablk that should be
zeroed out.
PR: 263407
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35019
We don't need it for userboot, but it avoids issues with BIND_NOW, so
just provide it. time(3) isn't defined but ends up being provided by
libc linked into the host process, which is generally fine.
PR: 262920
Reviewed by: imp, jhb
MFC after: 3 days
Diferential Revision: https://reviews.freebsd.org/D34758
Printing device followed by interface matches, e.g., edk2. Note that
this is only a fallback, many firmware implementations will provide the
protocol that we'll use to format device paths.
Reviewed by: imp, tsoome
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34539
- Add SPDX tag
- Add a files section describing different locations related to the
loader
- Add an example explaining how to install a new loader.efi to ESP
- Reference uefi(8)
Reviewed by: tsoome
Reviewed by: Pau Amma <pauamma@gundo.com>
Reviewed by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34592
The console escape code standard (ECMA-48) specifies color #3 (escape
code 33) as yellow. A brown console color is an artifact of the VGA
palette, which replaces dim (but not bright) yellow with brown.
Reviewed by: adrian, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34531
For historical reasons console color number 3 may be either yellow (most
consoles) or brown (VGA palette). The console escape code standard
uses "yellow", but teken color name constants appear to be based on the
VGA scheme and use TC_BROWN for color 3. Even so, the palette table
used 50,50,0 as the RGB percentage tuple, resulting in a dim yellow for
framebuffer consoles at the time teken was introduced.
Amusingly, in 19e2ce2d83 the comment on the palette entry was changed
from "brown" to "dark yellow" but the colour itself was changed from
a pure yellow to being somewhat brown.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Accept "bright" or "light" prefix for named colors.
For numeric colors, update error message to specify that values 0 to 15
are allowed, and verify that values are in that range.
Reviewed by: imp, tsoome (both earlier version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34512
Notable upstream pull request merges:
#9078: log xattr=sa create/remove/update to ZIL
#11919: Cross-platform xattr user namespace compatibility
#13014: Report dnodes with faulty bonuslen
#13016: FreeBSD: Fix zvol_cdev_open locking
#13019: spl: Don't check FreeBSD rwlocks for double initialization
#13027: Fix clearing set-uid and set-gid bits on a file when
replying a write
#13031: Add enumerated vdev names to 'zpool iostat -v' and
'zpool list -v'
#13074: Enable encrypted raw sending to pools with greater ashift
#13076: Receive checks should allow unencrypted child datasets
#13098: Avoid dirtying the final TXGs when exporting a pool
#13172: Fix ENOSPC when unlinking multiple files from full pool
Obtained from: OpenZFS
OpenZFS commit: a86e089415
If module_verbose is set to a value below MODULE_VERBOSE_TWIDDLE
call twiddle_divisor(UINT_MAX).
This makes more sense here than when we are loading the kernel.
Sponsored by: Juniper Networks, Inc.
UEFI provides a protocol for accessing randomness. This is a good way
to gather early entropy, especially when there's no driver for the RNG
on the platform (as is the case on the Marvell Armada8k (MACCHIATObin)
for now).
If the entropy_efi_seed option is enabled in loader.conf (default: YES)
obtain 2048 bytes of entropy from UEFI and pass is to the kernel as a
"module" of name "efi_rng_seed" and type "boot_entropy_platform"; if
present, ingest it into the kernel RNG.
Submitted by: Greg V
Reviewed by: markm, kevans
Approved by: csprng (markm)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20780
Set module_verbose to control the printing of information
about loaded modules and kernel:
0 MODULE_VERBOSE_SILENT None
1 MODULE_VERBOSE_SIZE Pathname and size
2 MODULE_VERBOSE_TWIDDLE as for 1 but also twiddle for progress
3 MODULE_VERBOSE_FULL extra detail
When the loader is verifying modules we already have a
running indication of progress and module_verbose=0 makes sense.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D34245
ld.bfd in binutils 2.34+ now reports an error in more cases for custom
ldscripts that do not place PHDRs in a LOAD segment. However, EFI
binaries are not dynamic binaries which need PHDRs, so pass
--no-dynamic-linker to disable this check.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34124
The text after .error et al is emitted verbatim.
Reviewed by: sjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33904
- Use AES_XTS_IV_LEN instead of the key length as the IV length.
- Use G_ELI_IVKEYLEN as the size of the zeroed iv[] array in
g_eli_crypto_cipher() to match geli_io().
PR: 261172
Reported by: Malcolm Matalka <mmatalka@gmail.com>, mikael
Reviewed by: markj
Sponsored by: FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33884
This helps mesuring what's happening when we load the kernel/modules/mfsroot.
This also adds TSENTER2 which uses the third argument of TSRAW, same
as in the kernel.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33699
The saf1761 OTG support was only for mips targets (BERI?). Retire it.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33706
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
Just have the MD code provide syscall and have generic code for the
rest.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33515
Split the powerpc specific parts into kboot/arch/powerpc64. More may be
needed here.
Sponsored by: Netflix
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D33514
As the first step at making this more generic, move kboot to top level.
Sponsored by: Netflix
Reviewed by: luporl, tsoome
Differential Revision: https://reviews.freebsd.org/D33513
tftp_open reads the first block so copy it in the cached data.
If we have more than one block (i.e. we called tftp_read before
tftp_preload) simply just reset the transfer.
Reported by: mmel
Reviewed by: mmel, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33697
shadow FB size could be rather large and depends on resolution,
instead of using heap, allocate dedicated space outside of heap.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33600
MFC after: 2 weeks