Commit Graph

890 Commits

Author SHA1 Message Date
Alan Cox
22c7bcb842 pmap_enter_quick_locked() never replaces a valid mapping, so it need not
perform a TLB invalidation.  A barrier suffices.  (See r343876.)

Add a comment to pmap_enter_quick_locked() in order to highlight the
fact that it does not replace valid mappings.

Correct a typo in one of pmap_enter()'s comments.

MFC after:	1 week
2019-06-23 21:06:56 +00:00
Alan Cox
36c5a4cb3f Introduce pmap_remove_l3_range() and use it in two places:
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.

Reviewed by:	markj
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D12725
2019-06-22 16:26:38 +00:00
Conrad Meyer
c363b16c63 sys: Remove DEV_RANDOM device option
Remove 'device random' from kernel configurations that reference it (most).
Replace perhaps mistaken 'nodevice random' in two MIPS configs with 'options
RANDOM_LOADABLE' instead.  Document removal in UPDATING; update NOTES and
random.4.

Reviewed by:	delphij, markm (previous version)
Approved by:	secteam(delphij)
Differential Revision:	https://reviews.freebsd.org/D19918
2019-06-21 00:16:30 +00:00
Alan Cox
0b3c5f1bc9 Correct an error in r349122. pmap_unwire() should update the pmap's wired
count, not its resident count.

X-MFC with:	r349122
2019-06-19 03:33:00 +00:00
Alan Cox
29c25bd781 Eliminate a redundant call to pmap_invalidate_page() from
pmap_ts_referenced().

MFC after:	14 days
Differential Revision:	https://reviews.freebsd.org/D12725
2019-06-17 01:58:25 +00:00
Alan Cox
c8f59059d8 Three changes to arm64's pmap_unwire():
Implement wiring changes on superpage mappings.  Previously, a superpage
mapping was unconditionally demoted by pmap_unwire(), even if the wiring
change applied to the entire superpage mapping.

Rewrite a comment to use the arm64 names for bits in a page table entry.
Previously, the bits were referred to by their x86 names.

Use atomic_"op"_64() instead of atomic_"op"_long() to update a page table
entry in order to match the prevailing style in this file.

MFC after:	10 days
2019-06-16 22:13:27 +00:00
Alan Cox
bf13f9d279 Three enhancements to arm64's pmap_protect():
Implement protection changes on superpage mappings.  Previously, a superpage
mapping was unconditionally demoted by pmap_protect(), even if the
protection change applied to the entire superpage mapping.

Precompute the bit mask describing the protection changes rather than
recomputing it for every page table entry that is changed.

Skip page table entries that already have the requested protection changes
in place.

Reviewed by:	andrew, kib
MFC after:	10 days
Differential Revision:	https://reviews.freebsd.org/D20657
2019-06-16 16:45:01 +00:00
Alan Cox
3b97569c31 Previously, when pmap_remove_pages() destroyed a dirty superpage mapping,
it only called vm_page_dirty() on the first of the superpage's constituent
4KB pages.  This revision corrects that error, calling vm_page_dirty() on
all of superpage's constituent 4KB pages.

MFC after:	3 days
2019-06-15 17:26:42 +00:00
Julian Elischer
c749d68596 Lightly hide the 'var' inside the macros to read the arm special registers.
I just happenned to have 3rd party code using 'var' as the output variable
which drew my attention to this. variables defined inside macros should be
prefixed to avoid getting shadowed varable wanrings from clang.
2019-06-15 00:47:39 +00:00
Alan Cox
26066aef10 Batch the TLB invalidations that are performed by pmap_protect() rather
than performing them one at a time.

MFC after:	10 days
2019-06-14 22:06:43 +00:00
Alan Cox
aa4a1d3a55 Change the arm64 pmap so that updates to the global count of wired pages are
not performed directly by the pmap.  Instead, they are performed by
vm_page_free_pages_toq().  (This is the same approach that we use on x86.)

Reviewed by:	kib, markj
MFC after:	10 days
Differential Revision:	https://reviews.freebsd.org/D20627
2019-06-14 04:01:08 +00:00
Alan Cox
a04cd5cdee Change pmap_demote_l2_locked() so that it removes the superpage mapping on a
demotion failure.  Otherwise, some callers to pmap_demote_l2_locked(), such
as pmap_protect(), may leave an incorrect mapping in place on a demotion
failure.

Change pmap_demote_l2_locked() so that it handles addresses that are not
superpage aligned.  Some callers to pmap_demote_l2_locked(), such as
pmap_protect(), may not pass a superpage aligned address.

Change pmap_enter_l2() so that it correctly calls vm_page_free_pages_toq().
The arm64 pmap is updating the count of wired pages when freeing page table
pages, so pmap_enter_l2() should pass false to vm_page_free_pages_toq().

Optimize TLB invalidation in pmap_remove_l2().

Reviewed by:	kib, markj (an earlier version)
Discussed with:	andrew
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D20585
2019-06-12 20:38:49 +00:00
Bjoern A. Zeeb
8c9ca28b31 A bit of code hygiene (no functional changes).
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.

MFC after:	2 weeks
2019-06-10 23:25:40 +00:00
Luiz Otavio O Souza
8c62ce83cc Add the GPIO driver for the North/South bridge in Marvell Armada 37x0.
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.

The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).

Sponsored by:	Rubicon Communications, LLC (Netgate)
2019-06-10 21:27:21 +00:00
Alan Cox
fd2dae0a30 Implement an alternative solution to the amd64 and i386 pmap problem that we
previously addressed in r348246.

This pmap problem also exists on arm64 and riscv.  However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv.  In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs.  (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)

This commit implements an alternative solution that can be used on all four
architectures.  Moreover, this solution has two other advantages.  First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly.  Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion.  Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().

In addition, remove a related stale comment from pmap_enter_{l2,pde}().

Reviewed by:	kib, markj (an earlier version)
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D20538
2019-06-09 03:36:10 +00:00
Tycho Nightingale
88e9fbe568 very large dma mappings can cause integer overflow
Reviewed by:	kib
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20505
2019-06-03 19:19:35 +00:00
Brooks Davis
4af6033324 makesyscalls.sh: always use absolute path for syscalls.conf
syscalls.conf is included using "." which per the Open Group:

 If file does not contain a <slash>, the shell shall use the search
 path specified by PATH to find the directory containing file.

POSIX shells don't fall back to the current working directory.

Submitted by:	Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by:	bdrewery
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D20476
2019-05-30 20:56:23 +00:00
Jayachandran C.
33e4f8169d arm64 gicv3_its: Fix a typo
Fix 'Cavium' spelling in errata description.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D20418
2019-05-30 01:39:07 +00:00
Jayachandran C.
55d9048856 gicv3_its: do LPI init only once per CPU
The initialization required for LPIs (setting up pending tables etc.)
has to be done just once per CPU, even in the case where there are
multiple ITS blocks associated with the CPU.

Add a flag lpi_enabled in the per-cpu distributor info for this and
use it to ensure that we call its_init_cpu_lpi() just once.

This enables us to support platforms where multiple GIC ITS blocks
can generate LPIs to a CPU.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D19844
2019-05-30 01:32:00 +00:00
Jayachandran C.
db359ad3d6 gicv3_its: refactor LPI init into a new function
Move the per-cpu LPI intialization to a separate function. This is
in preparation for a commit that does LPI init only once for a CPU,
even when there are multiple ITS blocks associated with the CPU.

No functional changes in this commit.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D19843
2019-05-30 01:24:47 +00:00
Jayachandran C.
a9b702ddde gic_v3: consolidate per-cpu redistributor information
Update 'struct gic_redists' to consolidate all per-cpu redistributor
information into a new 'struct redist_pcpu'. Provide a new interface
(GICV3_IVAR_REDIST) for the GIC driver, which can be used to retrieve
the per-cpu data.

This per-cpu redistributor struct will be later used to improve the
GIC ITS setup.

While there, remove some unused fields in gic_v3_var.h interface.
No functional changes.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D19842
2019-05-30 01:21:08 +00:00
Jayachandran C.
87820437f9 arm64 nexus: remove incorrect warning
acpi_config_intr() will be called when an arm64 system booted with ACPI.
We do the interrupt mapping for ACPI interrupts in nexus_acpi_map_intr()
on arm64, so acpi_config_intr() has to just return success without
printing this error message.

Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D19432
2019-05-26 23:04:21 +00:00
Conrad Meyer
daec92844e Include ktr.h in more compilation units
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes.  Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone.  Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.

Like r348026, these CUs did not show up in tinderbox as missing the include.

Reported by:	peterj (arm64/mp_machdep.c)
X-MFC-With:	r347984
Sponsored by:	Dell EMC Isilon
2019-05-21 20:38:48 +00:00
Conrad Meyer
e2e050c8ef Extract eventfilter declarations to sys/_eventfilter.h
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.

EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).

As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions.  The remainder of the patch addresses
adding appropriate includes to fix those files.

LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).

No functional change (intended).  Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed.  __FreeBSD_version has been bumped.
2019-05-20 00:38:23 +00:00
Doug Moore
60645781d6 Implement the ffs and fls functions, and their longer counterparts, in
cpufunc, in terms of __builtin_ffs and the like, for arm64
architectures, and use those, rather than the simple libkern
implementations, in building arm64 kernels.

Tested by: greg_unrelenting.technology (earlier version)
Reviewed by: alc
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20250
2019-05-17 15:52:17 +00:00
Konstantin Belousov
7c5a46a1bc Remove resolver_qual from DEFINE_IFUNC/DEFINE_UIFUNC macros.
In all practical situations, the resolver visibility is static.

Requested by:	markj
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Approved by:	so (emaste)
Differential revision:	https://reviews.freebsd.org/D20281
2019-05-16 22:20:54 +00:00
Tycho Nightingale
b961c0f244 Allow loading the same DMA address multiple times without any prior
unload for the LinuxKPI.

Reviewed by:	kib, zeising
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20181
2019-05-16 17:41:16 +00:00
Justin Hibbits
2471860668 arm64: Add the rename interpreter path for compat32 ld-elf
Let arm64 and arm32 dynamic binaries coexist.  Match all other compat32
archs.

Reviewed by:	manu
Sponsored by:	Juniper Networks, Inc
2019-05-16 17:04:29 +00:00
Konstantin Belousov
98fc918f41 arm64: bzero buffer for ucontext in freebsd32_swapcontext().
This change is the same as r340994 for amd64.

PR:	237922
Submitted by:	Young <yangx92@hotmail.com>
MFC after:	3 days
2019-05-16 13:00:35 +00:00
Dmitry Chagin
c5156c7785 Linuxulator depends on a fundamental kernel settings such as SMP. Many
of them listed in opt_global.h which is not generated while building
modules outside of a kernel and such modules never match real cofigured
kernel.

So, we should prevent our users from building obviously defective modules.

Therefore, remove the root cause of the building of modules outside of a
kernel - the possibility of building modules with DEBUG or KTR flags.
And remove all of DEBUG printfs as it is incomplete and in threaded
programms not informative, also a half of system call does not have DEBUG
printf. For debuging Linux programms we have dtrace, ktr and ktrace ability.

PR:		222861
Reviewed by:	trasz
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D20178
2019-05-13 18:24:29 +00:00
Emmanuel Vadot
595d5338fa arm64: rockchip: Don't always put PLL to normal mode
We used to put every PLL in normal mode (meaning that the output would
be the result of the PLL configuration) instead of slow mode (the output
is equal to the external oscillator frequency, 24-26Mhz) but this doesn't
work for most of the PLLs as when we put them into normal mode the registers
configuring the output frequency haven't been set.
Add a normal_mode member in clk_pll_def/clk_pll_sc struct and if it's true
we then set the PLL to normal mode.
For now only set it to the LPLL and BPLL (Little cluster PLL and Big cluster
PLL respectively).

Reviewed by:	ganbold
Differential Revision:	https://reviews.freebsd.org/D20174
2019-05-10 16:45:17 +00:00
Andrew Gallatin
542970fa2d Remove IPSEC from GENERIC due to performance issues
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.

Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.

Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module

Reviewed by:	cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision:	https://reviews.freebsd.org/D20163
2019-05-09 22:38:15 +00:00
Emmanuel Vadot
052073c382 Add support for USB 3.0 XHCI via ACPI
Ampere eMAG systems have XHCI just described in ACPI, not on PCI.

Submitted by:	Greg V <greg@unrelenting.technology>
Reviewed by:	andrew
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D19986
2019-05-08 15:42:39 +00:00
Kyle Evans
251a32b5b2 tun/tap: merge and rename to tuntap
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).

This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp

[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).

ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.

(MFC commentary)

This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.

I have no plans to do this MFC as of now.

Reviewed by:	bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from:	melifaro
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
Ed Maste
0e26cd440f make sysent after r347228
Regenerate to add @generated tag in generated files.
2019-05-07 18:10:21 +00:00
Ed Maste
e0bfdf599d Reformat arm64 linux syscalls.master per current style
Equivalent to r339958 for sys/kern/syscalls.master.

MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D14858
2019-05-06 16:07:14 +00:00
Konstantin Belousov
ecaed009a9 arm64: Properly restore PAN when done with userspace access in casueword.
Approved by:	andrew
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2019-05-04 19:40:30 +00:00
Ganbold Tsagaankhuu
07be3e3dc9 Add emmc clock definitions for Rockchip RK3399 SoC. 2019-05-04 10:48:44 +00:00
Dmitry Chagin
d151344dbf In order to reduce duplication between MD parts of the Linuxulator
move bits that are MI out into the headers in compat/linux.
For that remove bogus _packed attribute from struct l_sockaddr
and use MI types for struct members.

And continue to move into the linux_common module a code that is
intended for both Linuxulator modules (both instruction set - 32 & 64 bit)
or for external modules like linsysfs or linprocfs.

To avoid header pollution introduce new sys/compat/linux_common.h header.

Reviewed by:	emaste
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D20137
2019-05-03 08:42:49 +00:00
Conrad Meyer
d6745408c7 Add a COMPAT_FREEBSD12 kernel option.
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.

Reviewed by:	imp, jhb, markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20120
2019-05-02 18:10:23 +00:00
Emmanuel Vadot
5b1309542e arm64: Add support for NanoPI NEO2
Add overlay files and activate devicetree file for NanoPi NEO2 featuring
Allwinner H5 ARM64 core.
To enable sound, dma and codec drivers are enabled for build.

Submitted by:	Manuel Stühn (freebsdnewbie@freenet.de)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D20129
2019-05-02 12:56:13 +00:00
Andrew Turner
fa19730c61 Restore x18 in efi_arch_leave.
Some UEFI implementations trash this register and, as we use it as a
platform register, the kernel doesn't save it before calling into the UEFI
runtime services. As we have a copy in tpidr_el1 restore from there when
exiting the EFI environment.

PR:		237234, 237055
Reviewed by:	manu
Tested On:	Ampere eMAG
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Sponsored by:	Ampere Computing (hardware)
Differential Revision:	https://reviews.freebsd.org/D20127
2019-05-01 17:12:49 +00:00
Ganbold Tsagaankhuu
65f1fc3f3f Add a hw.model sysctl oid for arm64 which reports the CPU model similar to armv6/7.
Reviewed by:	andrew, manu
Differential Revision:	https://reviews.freebsd.org/D20123
2019-05-01 14:20:31 +00:00
Ganbold Tsagaankhuu
c4a350ffea Add SY8106A Buck Regulator and Allwinner CIR devices to GENERIC arm64 kernel. 2019-04-20 03:21:47 +00:00
Jung-uk Kim
278f0de60d Merge ACPICA 20190329. 2019-03-29 20:21:28 +00:00
Andrew Turner
40fcc4760e Sort printing of the ID registers on arm64 to be identical to the
documentation. This will simplify checking new fields when they are added.

MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-25 18:02:04 +00:00
Marcin Wojtas
e54926b254 Enable etherswitchcfg and e6000sw driver in arm64 build
After latest binding update, this patch enables usage of
the switch on Armada 3720 EspressoBin, so compile it
by default with arm64 GENERIC.

A patch was extracted from https://reviews.freebsd.org/D19036

Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
2019-03-23 02:53:47 +00:00
Colin Percival
4782b90e4a Add nvme support to the arm64 GENERIC kernel.
Submitted by:	Greg V
Differential Revision:	https://reviews.freebsd.org/D19657
2019-03-22 06:36:40 +00:00
Marcin Wojtas
8b0f6c4215 Add bus_release_resource() method to nexus on arm64
The nexus module was missing method for releasing bus resources. As a
result, it couldn't be released and the bus_release_resource() call would
return ENXIO.

Next call to bus_alloc_resource() for the same resource was returning
error, because it wasn't released previously and it was still busy.

The implementation of the nexus_release_resource() is the same as for
arm architecture.

Submitted by:  Michal Krawczyk <mk@semihalf.com>
Reported-by:   Greg V <greg@unrelenting.technology>
Tested-by:     cperciva, Greg V <greg@unrelenting.technology>
Obtained from: Semihalf
MFC after:     2 weeks
Sponsored by:  Amazon, Inc.
Differential revision: https://reviews.freebsd.org/D19641
2019-03-21 10:51:36 +00:00
Konstantin Belousov
fd8d844f76 amd64 KPTI: add control from procctl(2).
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting.  PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.

Requested by:	jhb
Reviewed by:	jhb, markj (previous version)
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D19514
2019-03-16 11:44:33 +00:00