ARM guest is considered as HVM but it only supports PV nics (no
emulation available).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29405
For embedded devices reserved addresses will be known in advance. More
recently added devices will also likely be correctly updated. As a
result using any available address is reasonable on non-x86.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29304
Commit 1522652230 was implemented strictly for x86. Unfortunately
one of the pieces was mixed into a common area breaking other
architectures. For now disable these bits on !x86, this should be
cleaned up later.
Fixes: 1522652230 ('xen: fix dropping bitmap IPIs during resume')
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29306
The requirements for pages shared with Xen/other VMs may vary from
architecture to architecture. As such create a macro which various
architectures can use.
Remove a use of PAT_WRITE_BACK in xenstore.c. This is a x86-ism which
shouldn't have been present in a common area.
Original idea: Julien Grall <julien@xen.org>, 2014-01-14 06:44:08
Approach suggested by: royger
Reviewed by: royger, mhorne
Differential Revision: https://reviews.freebsd.org/D29351
Minor changes are necessary to make this processor-independent, but
moving the file out of x86 and into common is the first step (so
others don't add /more/ x86-isms).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29042
While at it only output driver version to dmesg(8) when hardware is present.
Differential Revision: https://reviews.freebsd.org/D29100
MFC after: 1 week
Reviewed by: kib and markj
Sponsored by: NVIDIA Networking
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
Buggy SD card drivers may attach and detach a mmc(4) driver instance in
quick succession. In this case mmc(4) must disestablish its intrhook
callback during detach. Thus, this change adds a call to
config_intrhook_drain(), which blocks or does nothing if the intrhook is
running or has already ran (the SD card was plugged in), and
disestablishes the hook if it hasn't ran yet (the SD card was not
plugged in).
PR: 254373
Reviewed by: imp, manu, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31262
When using SDIO the block size if per function and most of the time
not equal to MMC_SECTOR_SIZE, fix sdio on dwmmc by setting the correct
block size in the mmc registers.
MFC after: 1 month
Sponsored by: Diablotin Systems
This make it easier for script to get the hardware on which they are running.
MFC after: 1 month
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D31205
Reviewed by: imp
Should be ok on powerpc: jhibbits (over irc)
Due to a mis-merge, the changes committed to libpmc never called
pmu_parse_event(), or set pm->pm_ev. However, this field shouldn't be
used to carry the actual pmc event code anyway, as it is expected to
contain the index into the pmu event array (otherwise, it breaks event
name lookup in pmclog_get_event()). Add a new MD field,
pm_md.pm_md_config, to pass the raw event code to arm64_allocate_pmc().
Additionally, the change made to pmc_md_op_pmcallocate was incorrect, as
this is a union, not a struct. Restore the proper padding size.
Reviewed by: luporl, ray, andrew
Fixes: 28dd6730a5 ("libpmc: enable pmu_utils on arm64")
Fixes: 8cc3815f02 ("hwpmc_arm64: accept raw event codes...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31221
These two ioctls are not part of the current version of OSS and were
considered obsolete. However, their behaviour is not the same as their
old one, so this implementation is specific to FreeBSD.
Older OSS versions had the MUTE ioctls take and return an integer with
a value of 0 or 1, which meant that the _whole_ mixer is unmuted or
muted respectively. In my implementation, the ioctl takes and returns
a bitmask that tells us which devices are muted.
This allows us to mute and unmute only the devices we want, instead of the
whole mixer. The bitmask works the same way as in DEVMASK, RECMASK and
RECSRC.
Integrated the hardware volume feature with the new mute system.
Submitted by: Christos Margiolis <christos@freebsd.org>
Differential Revision: https://reviews.freebsd.org/D31130
MFC after: 1 week
Sponsored by: NVIDIA Networking
Currently we use the num-viewports property to decide how many outbound
regions there are we can use, defaulting to 2. However, Linux has
stopped using that and so it no longer appears in new device trees, such
as for the SiFive FU740. Instead, it's possible to just probe the
hardware directly.
Reviewed by: mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31030
This supersedes the old legacy mode where a viewport register was used
to mux multiple regions behind a single set of registers, and is used on
the SiFive FU740.
Reviewed by: mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31029
Currently we assume there is only one memory and one prefetch memory
window, and ignore the latter. However, the SiFive FU740 has two normal
memory windows.
As part of this, the viewports are rearranged. Previously the viewports
were memory, config then optionally I/O. Both to simplify the config
index calculation and to ensure it can always be mapped even if we have
too many memory windows for the number of viewports, config is moved to
being the first viewport.
This generalisation now also naturally supports mapping prefetch memory
windows.
Reviewed by: mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31028
Note that currently Linux's device tree uses the FU540's compatible
string, as does upstream U-Boot, but the U-Boot shipped with the board
based on an older patch series has the correct FU740 name. Thankfully
they are the same, at least as far as software is concerned.
Whilst here, fix a style(9) nit.
Reviewed by: philip, kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31034
The intention here is to reduce differences between em, igb, igc, ixgbe.
The main functional change is logical simplification in igb_rx_checksum
and getting interface caps from scctx instead of the ifp.
Reviewed by: gallatin, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30073
If a data PDU encounters an error such as a digest error, the firmware
will report that data PDU when completion moderation is active even if
it is not the final data PDU in a burst.
Sponsored by: Chelsio Communications
A non-placed PDU can be delivered by CPL_RX_ISCSI_CMP in the middle of
a burst of placed PDUs (received via DDP) in which case the rcv_nxt
will not match the start of the non-placed PDU.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
The intention here is to reduce differences with D30072.
The only functional change is logical simplification in
ixgbe_rx_checksum.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D30074
It can be useful for system operators to see this kind of information
when correlating issues or requesting support from the OEM or Intel for
hardware and firmware issues.
Reviewed by: gallatin
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30178
This fixes a kernel panic when probing for vmd_bus on Intel TigerLake on
14-CURRENT. Apparently, vmd_bus is a type of PCI bus, but was registered
as a separate device class.
PR: 256915
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D31071
To guard against the ill effects of a spurious interrupt during
construction (or one that was bogusly pending), enable interrupts after
the qpair is completely constructed. Otherwise, we can die with null
pointer dereferences in nvme_qpair_process_completions. This has been
observed in at least one pre-release NVMe drive where the MSIX interrupt
fired while the queue was being created, before we'd started the NVMe
controller card.
The alternative of only turning on the interrupts after the rest was
tried, but was insufficient to work around this bug and made the code
more complicated w/o benefit.
Reviewed by: mav, chuck
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31182
port devices. If it gets eaten it is fine. Many USB device side implementations
don't properly support the clear endpoint halt command and if they do, data is lost
because the transmit FIFO is typically reset when this command is received.
Tested by: jmg
MFC after: 1 week
Sponsored by: NVIDIA Networking
if it is only multiplexed device. Also enable syncbit checks for them.
This fixes touchpad recognition on Panasonic Toughbook CF-MX4 laptop.
Reported by: Tomasz "CeDeROM" CEDRO <tomek_AT_cedro_DOT_info>
MFC after: 1 month
PR: 253279
Differential revision: https://reviews.freebsd.org/D28502
These registers have read side effects and a read at just the right
(wrong?) time can trash some internal hw state.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
The problem is that ns8250_bus_probe() accesses a field from the
ns8250_softc, which embeds the generic UART softc, but the ns8250_softc
hasn't yet been allocated because we're still probing.
This is a regression from commit 0aefb0a63c. This fixed a problem
where one of the upper four IER bits, which are usually reserved, needs
to be set in order to get RX interrupts before the RX FIFO is full. At
the same time, we avoid clearing those reserved bits (see commit
58957d8717, though other UART drivers I looked at do not bother with
this).
So, copy what ns8250_init() does to disable interrupts, since we don't
know what the "right" mask is at this point.
Reported by: syzbot+f256beefd0df9eb796e7@syzkaller.appspotmail.com
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31124
Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.
Fixes
-----
BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Properly allocate all mlx5en(4) structures from correct numa domain.
While at it cleanup unused numa domain integers deriving from the
Linux version of mlx5en(4).
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Make sure the "uid" field gets properly set when destroying DCT and QP
objects by making a copy of the field when creating such objects.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Currently when we map the hca_core_clock page to the user space,
there are vulnerable registers, one of which is semaphore, on
this page as well. If user read the wrong offset, it can modify the
above semaphore and hang the device.
Hence, mapping the hca_core_clock page to the user space only when
user required it specifically.
After this patch, mlx4 core_clock won't be mapped to user space by
default. Oppose to current state, where mlx4 core_clock is always mapped
to user space.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
To avoid congestion on the same PCI memory register space when
traffic consists mostly of small packets.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The driver expects all TLS tags to be returned to the driver before
it can free the UMA zone where the TLS tags reside.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16() validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.
Linux commit:
65389322b28f81cc137b60a41044c2d958a7b950
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
RoCE is short for Remote direct memory access over Converged Ethernet.
ECN is short for Explicit Congestion Notification.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Querying the PCI config space for offline for every firmware command blocks
the PCI bus and affects performance. Especially for packet pacing and TLS
when objects are frequently created and destroyed.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
These fields declare which timestamp mode is supported
by the device per RQ/SQ/QP.
In addition add the ts_format field to the select the mode
for RQ/SQ/QP.
Linux commit:
a6a217dddcd544f6b75f0e2a60b6e84c1d494b7e
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state makes the
checks of out-of-scope redundant. Let's remove them together with updating
function signature to return boolean result.
While at it remove unused "ll" parameter from ib_modify_qp_is_ok().
Linux commit:
19b1f54099b6ee334acbfbcfbdffd1d1f057216d
d31131bba5a1630304c55ea775c48cc84912ab59
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Linux commit:
72a7720fca37fec0daf295923f17ac5d88a613e1
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Extended atomics are supported with RC and XRC QP types, but Linux commit
a60109dc9a95 added an unneeded check to to_mlx5_access_flags().
This broke XRC QPs.
The following ib_atomic_bw invocation over XRC reproduces the issue:
ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD
It is safe to remove such checks because the QP type was already checked
in ib_modify_qp_is_ok(), which was previously called from
mlx5_ib_modify_qp().
Linux commit:
13f8d9c16693afb908ead3d2a758adbe6a79eccd
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The maximum page size in the mkey context is 2GB.
Until today, we didn't enforce this requirement in the code, and therefore,
if we got a page size larger than 2GB, we have passed zeros in the
log_page_shift instead of the actual value and the registration failed.
This patch limits the driver to use compound pages of 2GB for mkeys.
Linux commit:
762f899ae7875554284af92b821be8c083227092
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The patch simplifies mlx5_ib_cont_pages and fixes the following
issues in the original implementation:
First issues is related to alignment of the PFNs. After the check
base + p != PFN, the alignment of the PFN wasn't checked. So the PFN
sequence 0, 1, 1, 2 would result in a page_shift of 13 even though
the 3rd PFN is not 8KB aligned.
This wasn't actually a bug because it was supported by all the
existing mlx5 compatible device, but we don't want to require
this support in all future devices.
Another issue is because the inner loop didn't advance PFN so
the test "if (base + p != pfn)" always failed for SGE with
len > (1<<page_shift).
Linux commit:
d67bc5d4e3e100d762c0f57ea67f28bc219698a6
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
- Upon error more completion events than requested may be generated,
particularly when using the completion event factor feature.
- Count number of event errors in the transmit path.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.
This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Linux commit:
ca5b91d63192ceaa41a6145f8c923debb64c71fa
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Make the mlx5e_mode_table[] array one dimensional, because there is only
one entry, 10G ER/LR, which share the same protocol bit.
This patch only adds support for basic sub-type distinguishing for the
extended protocol bits. Use verbose ifconfig eeprom output to get actual
media type.
Remove write only "connector_type" variable while at it.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
This code practically has not sleeping points, so Giant is locked for very
long time.
Noted and reviewed by: hselasky
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Import Linux commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da
Add reserved mapping to cover all the register in order to avoid setting
arbitrary values to newer FW which implements the reserved fields.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies // NVIDIA Networking
MFC after: 1 week
Import Linux commit ce28f0fd670ddffcd564ce7119bdefbaf08f02d3:
Add reserved mapping to cover all the register in order to avoid
setting arbitrary values to newer FW which implements the reserved
fields.
Taken from: https://patches.linaro.org/patch/417255/
Reviewed by: hselasky
Sponsored by: Mellanox Technologies // NVIDIA Networking
MFC after: 1 week
In particular, avoid creating TIR or installing flow rules for VXLAN
if the capability is disabled.
Reported and reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Handlers maintain flow rules and inform hardware about non-standard VxLAN
port in use. The database of the vxlan end points is maintained.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
sys/dev/sound/pci/hda/hdaa_patches.c:
match_pin_patches: Use HDA_DEV_MATCH instead of regular ==
sys/dev/sound/pci/hda/pin_patch_realtek.h:
Add quirk for Lenovo laptops when ALC298 is used.
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
As in commit 831850d8b0, this routine can trigger false positives, so
exclude it from instrumentation.
Reported by: pho
Sponsored by: The FreeBSD Foundation
during suspend/resume cycle. Previously used bus_generic_suspend_intr and
bus_generic_resume_intr may cause interrupt storm because of missed
interrupt acknowledges caused by blocking of intr handler.
Reported by: J.R. Oldroyd <jr_AT_opal_DOT_com>
MFC after: 1 week
These have been found in some Arm ACPI tables generated by edk2, e.g.
when describing the pl011 uart on the Arm AEMv8 model.
Reviewed by: imp, jkim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31110
During the removal of cam_sim_alloc_dev() in
aeb04e88f5 for sdhci.c and the
follow-up build-fix in a72af82e31
slot->dev and slot->bus got mixed up for MMCCAM; slot->dev is
only used in the !MMCCAM case so is uninitialised here leading to
a panic; switch back to slot->bus to return to the status quo.
Reviewed by: imp (ack on arm@)
X-Differential Revision: https://reviews.freebsd.org/D30857
With the v5.13 device-tree update speed of the CPU switch port was
changed to 2.5G. Reflect that in the driver.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
New Samsung 980 SSDs report Namespace Preferred Write Alignment of
8 (4KB) and Namespace Preferred Write Granularity of 32 (16KB).
My quick tests show that 16KB is a minimal sequential write size
when the SSD reaches peak IOPS, so writing much less is very slow.
But writing slightly less or slightly more does not change much,
so it seems not so much a size granularity as minimum I/O size.
Thinking about different stripesize consumers:
- Partition alignment should be based on NPWA by definition.
- ZFS ashift in part of forcing alignment of all I/Os should also
be based on NPWA. In part of forcing size granularity, if really
needed, it may be set to NPWG, but too big value can make ZFS too
space-inefficient, and the 16KB is actually the biggest supported
value there now.
- ZFS recordsize/volblocksize could potentially be tuned up toward
NPWG to work as I/O size granularity, but enabled compression makes
it too fuzzy. And those are normally user-configurable things.
- ZFS I/O aggregation code could definitely use Optimal Write Size
value and may be NPWG, but we don't have fields in GEOM now to report
the minimal and optimal I/O sizes, and even maximal is not reported
outside GEOM DISK to be used by ZFS.
MFC after: 1 week
Make it work, but change the interface to be safe for non-root users. In
particular, right now interface only works for the tables which can be
minimally parsed by kernel to determine the table size. Then, userspace can
query the table size, after that it provides a buffer of needed size
and kernel copies out just table to userspace.
Main advantage is that user no longer need to be able to read /dev/mem,
the disadvantage is the need to have minimal parsers aware of the table
types. Right now the parsers are implemented for ESRT and PROP tables.
Future extension of the present interface might be a return of only
the table physical address, in case kernel does not have suitable
parser yet. Then, a privileged user could read the table from /dev/mem.
This extension, which logically equivalent to the old (non-worked)
EFIIOC_GET_TABLE variant, is not implemented until needed.
Submitted by: Pavel Balaev <pavel.balaev@3mdeb.com>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30104
Coherently read the phase bit of the status completion record. We loop
over the completion record array, looking for all the transactions in
the same phase that have been completed. In doing that, we have to be
careful to read the status field first, and if it indicates a complete
record, we need to read and process that record. Otherwise, the host
might be overtaken by device when reading this completion record,
leading to a mistaken belief that the record is in phase. This leads to
the code using old values and looking at an already completed entry, which
has no current tracker.
To work around this problem, we read the status and make sure it is in
phase, we then re-read the entire completion record guaranteeing it's
complete, valid, and consistent . In addition we resync the dmatag to
reflect changes since the prior loop for the bouncing dma case.
Reviewed by: jrtc27@, chuck@
Found by: jrtc27 (this fix is based in part on her D30995 fix)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31002
Remove __packed from nvme_command, nvme_completion and
nvme_dsm_trim. Add super-alignment to nvme_completion since it's always
at least that aligned in hardware (and in our existing uses of it
embedded in structures). It generates better code in
nvme_qpair_process_completions on riscv64 because otherwise the ABI
assumes a 4-byte alignment, and the same on all other platforms.
Reviewed by: jrtc27@, mav@, chuck@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31001
Put the { on the same line as the struct nvme_foo when we define these
structures. It's FreeBSD standard and these were inconsistent.
Sponsored by: Netflix
Subtract one SGE for the case of misaligned address. Also take into
account maximum number of sectors reported by firmware, that gives
nicer 256KB limit instead of 276KB calculated from the SGE limit.
While there, remove number of I/O size checks, duplicating what is
already checked by CAM and busdma(9).
MFC after: 1 month
Sponsored by: iXsystems, Inc.
phandle_t is a uint32_t type, <= 0 comparison doesn't work with it as intended.
This caused the ofw_pci code to attach to PCI bus on ACPI based systems.
Since 3eae4e106a ("Fix error value returned by ofw_bus_gen_get_node().")
ofw subsystem can only return -1 for invalid nodes. Use that.
MFC after: 4 weeks
Reviewed by: mw
Differential revision: https://reviews.freebsd.org/D30953
Make it possible to specify event codes without an offset of
PMC_EV_ARMV8_FIRST, by setting a machine-dependent flag. This is
required to make use of event definitions from pmu-events.
Reviewed by: ray (slightly earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30602
This will be used to detect supported pmu events. The expected format is
the MIDR register with the revision and variant fields masked. See also:
lib/libpmc/pmu-events/arch/arm64/mapfile.csv.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30601
Fix forgotten argument and type error. MMCCAM isn't enabled by default,
and I'd mistakenly thought it was, so these went undetected precommit.
Sponsored by: Netflix
xpt_bus_register and xpt_bus_deregister returns a hybrid error that's
neither a cam_status, nor an errno, but a mix of both. Update
xpt_bus_register and xpt_bus_deregister to return an errno. The vast
majority of current users compare against zero, which can also be
spelled CAM_SUCCESS. Nobody uses CAM_FAILURE, so remove that symbol
to prevent comfusion (nothing returns it either).
Where the return value is saved, ensure that the variable 'error' is
used to store an errno and 'status' is used to store a cam_status where
it makes the code clearer (usually just in functions that already mix
and match). Where the return value isn't used at all, avoid storing it
at all.
Reviewed by: scottl@, mav@ (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30860
Use the new xpt_path_device to get the device_t using the periph's path.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30855
This makes it more usable in that dhclient will autolaunch from devd
now when cdce devices are plugged in.. It also sets the baudrate, but
this isn't exported via tools, and CDCE doesn't have a good way to
specify the media type, so there isn't a good way to tell userland
what the speed is currently...
Reviewed by: hps
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30625
The driver used to configure all available classes with some default
parameters on attach and the rest of t4_sched.c was written with the
assumption that all traffic classes are always valid in the hardware.
But this resulted in a lot of informational messages being logged in the
firmware's circular log, crowding out other more useful messages.
This change leaves the tx scheduler alone during attach to reduce the
spam in the devlog. The state of every class is now tracked separately
from its flags and there is support for an 'uninitialized' state.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Recent firmwares are able to utilize the traffic classes of tx channels
that were previously unused. This effectively doubles the number of
traffic classes available per port for 2 port cards. Stop using the raw
per-channel value in the driver and ask the firmware for the number of
usable traffic classes instead.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Some of the changes in this release:
* Large LLQ headers,
* Bug/stability fixes,
* Change of the README/Documentation.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Update the driver in order not to break its compilation
and make use of the new ENA logging system
Migrate platform code to the new logging system provided by ena_com
layer.
Make ENA_INFO the new default log level.
Remove all explicit use of `device_printf`, all new logs requiring one
of the log macros to be used.
IO queue related attributes are registered statically at driver attach
with the rest of the ENA specific sysctl nodes. However, the number of
queues can be changed at runtime via the `ena_sysctl_io_queues_nb`
request, leading to a potential exposure of attributes for non-existing
queues.
Introduce a new `ena_sysctl_update_queue_node_nb` function, which
updates the sysctl nodes after the number of queues is altered.
This happens by either registering or unregistering node specific oids,
based on a delta between the previous and current queue count.
NOTE: All unregistered oids must be registered again before the driver
detach, e.g. by another call to this function.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Calling free on a NULL pointer is valid, as appropriate check is already
done internally:
/* free(NULL, ...) does nothing */
if (addr == NULL)
return;
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Default LLQ (Low-latency queue) maximum header size is 96 bytes and can
be too small for some types of packets - like IPv6 packets with multiple
extension. This can be fixed, by using large LLQ headers.
If the device supports larger LLQ headers, the user can activate this
feature by setting sysctl tunable 'hw.ena.force_large_llq_header' to '1'
in the /boot/loader.conf file.
In case the device isn't supporting this feature, the default value (96B)
will be used.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
According to man style(9), only C-style comments should be used.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Implement support for the NXP LS1028A SoC MDIO controller.
It is attached to the internal PCI root complex.
The controller is used to communicate with PHYs of ports connected
to the internal switch.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30731
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Provide common MDIO code for two LS1028 ENETC controllers -
an external one found on the PCI bus and internal one found in ENETC.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30730
By definition ofw_bus_get_node() should consistently return -1 when there
is no associated OF node.
MFC after: 4 weeks
Discussed with: nwhitehorn
Analyzed in: https://reviews.freebsd.org/D30761
ddfc9c4c59 was missing changes to two files to complete the
bus_child_pnpinfo_str->bus_child_pnpinfo. This fixes the broken kernel
builds.
Sponsored by: Netflix
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
If the connection is in the process of disconnecting, ic_socket can be
NULL. For icl_cxgbei_conn_transfer_setup(), lock the connection and
check ic_socket before using it. For icl_cxgbei_conn_task_setup(),
the caller already holds the connection lock, so assert it and bail
early with ECONNRESET if the connection is disconnecting.
Reported by: Jithesh Arakkan @ Chelsio
Fixes: f949967c8e cxgbei: Fix a race between transfer setup and a peer reset.
The INQUIRY command may return a CAM_DATA_RUN_ERR code, even when
it succeeds. This happens during driver startup, causing the
current and further inquiries to be aborted, resulting in some
missing information about the controller.
Reviewed by: imp
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30843
Reserve one page for the DMA subsystem, that may need it when the I/O
buffer is not page aligned.
Without this change, writes with the maximum allowed size failed, if:
- physical memory was fragmented, making it necessary to use one DMA
segment for each page
- the buffer to be written was not page aligned, causing the DMA
subsystem to need one extra segment
In the scenario above, the DMA subsystem would run out of segments,
resulting in a write with no SG segments, that would fail.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30798
ni_txseqs is kept as 16-bit counter, but we need to trim the upper four
bits as they may have special meanings for the firmware / hardware.
For instance, bit 15 enables hardware / firmware generation of sequence
numbers that overrides sequence numbers programmed by the driver.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30814
Given all the code does operate on struct ifnet, the last step in this
longer series of changes now is to rename struct net_device to
struct ifnet (that is what it was defined to in the LinuxKPi code).
While mlx4 and OFED are "shared" code the decision was made years ago
to not write it based on the netdevice KPI but the native ifnet KPI
for most of it. This commit simply spells this out and with that
frees "struct netdevice" to be re-done on LinuxKPI to become a more
native/mixed implementation over time as needed by, e.g., wireless
drivers.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30515
The NIC TLS and TOE TLS modes in cxgbe(4) both work with TLS key
contexts. Previously, TOE TLS supported TLS key contexts created by
two different methods, and NIC TLS had a separate bit of code copied
from NIC TLS but specific to KTLS. Now that TOE TLS only supports
KTLS, pull common code for creating TLS key contexts and programming
them into on-card memory into t4_keyctx.c.
Sponsored by: Chelsio Communications
TOE TLS offload was first supported via a customized OpenSSL developed
by Chelsio with proprietary socket options prior to KTLS being present
either in FreeBSD or upstream OpenSSL. With the addition of KTLS in
both places, cxgbe's TOE driver was extended to support TLS offload
via KTLS as well. This change removes the older interface leaving
only the KTLS bindings for TOE TLS.
Since KTLS was added to TOE TLS second, it was somehat shoe-horned
into the existing code. In addition to removing the non-KTLS TLS
offload, refactor and simplify the code to assume KTLS, e.g. not
copying keys into a helper structure that mimic'ed the non-KTLS mode,
but using the KTLS session object directly when constructing key
contexts.
This also removes some unused code to send TX keys inline in work
requests for TOE TLS. This code was never enabled, and was arguably
sending the wrong thing (it was not sending the raw key context as we
do for NIC TLS when using inline keys).
Sponsored by: Chelsio Communications
Some code was using it already, but in many places we were testing
SO_ACCEPTCONN directly. As a small step towards fixing some bugs
involving synchronization with listen(2), make the kernel consistently
use SOLISTENING(). No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation