DP8390-based cards have no generic way of reporting status of the link
or setting the media type. Some specific versions of these cards do,
however, allow for this, and we already support some of them. Make
the 'ed' experience more uniform by providing "autoselect" as the
meida and status "active" always. This won't affect the chips that
provide more specific details.
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
support for virtual core files (aka minidumps). physical core
files are not supported.
The implementation is cross-tool ready and can be used in a non-
powerpc hosted debugger to analyze PowerPC core files. It also
accepts core files that still have the dump header, as can be
the case within Juniper where TFTP-based kernel core files are
supported and savecore is not used to "extract" the core file
from some dump device.
Obtained from: Juniper Networks, Inc.
an NFS node including the access and attribute caches. Previously the NFS
client only purged any name cache entries associated with the file.
PR: kern/123755
Submitted by: Jaakko Heinonen jh of saunalahti fi
Reported by: Timo Sirainen tss of iki fi
Reviewed by: rwatson, rmacklem
MFC after: 1 month
client from 30 seconds to 3 seconds. After the recent changes to add
caching of negative name cache lookups, a negative name cache hit will
persist until the client notices the parent directory has changed. The
higher the attribute cache timeout on directories, the longer that can take,
so lower the default timeout for directories to match that of regular files.
Suggested by: bde, mohans
MFC after: 1 month
calculation was too agressive. Instead we should only
look at each nibble. This makes it so we make
10.2.0.0 become 10.2/16 NOT 10.2/17.
Need to explore the non-cidr address issue. The two
may not be seperable..
MFC after: 1 week
because it means getdelim() returns -1 for both error and EOF, and
never returns 0. However, this is what the original GNU implementation
does, and POSIX inherited the bug.
Reported by: marcus@
It makes little sense to use 100 Hz polling in dcons. We cannot live
without polling, because that's just how dcons works. It polls the
buffer filled by the firewire hardware. 25 Hz is probably enough for
most use cases.
Discussed with: rwatson
Tested by: kan
vfs:namei:lookup:entry takes parent directory vnode pointer, path to
look up, and lookup flags.
vfs:namei:lookup:return takes an error value, and if successful, the
returned vnode pointer.
MFC after: 1 month
if a entry is not route add -net xxx/bits then we should use
the addr (xxx) to establish the number of bits by looking at
the first non-zero bit. So if we enter
route add -net 10.1.1.0 10.1.3.5
this is the same as doing
route add -net 10.1.1.0/24
Since the 8th bit (zero counting) is set to 1 we set bits
to 32-8.
Users can of course still use the /x to change this behavior
or in cases where the network is in the trailing part
of the address, a "netmask" argument can be supplied to
override what is established from the interpretation of the
address itself. e.g:
route add -net 10.1.1.8 -netmask 0xff00ffff
should overide and place the proper CIDR mask in place.
PR: 131365
MFC after: 1 week
dcons_drv_init invocations. Testing return value for 0 does not work for
cases where dcons_drv_init was called already as part of low level
console initialization.
Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.
This cuts out a lot of code in the host controller files and saves one thread
per USB bus.
Submitted by: Hans Petter Selasky
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
- add support for more complicated HID descriptors which can have multiple
definitions of the same field.
- remove old modulo patch in ums, which I think is due to bad HID parsing,
which should be fixed now.
Reported by: netchild
Submitted by: Hans Petter Selasky
at91_udp.c does not exist anymore, it is now replaced by at91dci in
src/sys/dev/usb/controller. Also remove the ohci_atmelarm.c because it is also
included in src/sys/conf/files
Submitted by: Sylvestre Gallon
Some cancelable flags are always true. Substitute these away. These cancelable
flags were mostly useful with the root HUB which is now handled differently.
Submitted by: Hans Petter Selasky
Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
"usb2_config" has a new field called "usb_mode" which select for which mode
the current xfer entry is active. Options are: a) Device mode only b) Host
mode only (default-by-zero) c) Both modes. This change was scripted using
the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
the code for the function uses less memory than the table itself.
Submitted by: Hans Petter Selasky
- bugfixes after the memory usage reduction patch
- Use "udev->pipes_max" instead of USB_EP_MAX
- Use correct "bmRequestType" for getting the config descriptor.
Submitted by: Hans Petter Selasky
