When adding getline(3) and dprintf(3) into libc, those guards were added
to prevent breaking too many ports.
7 years later the ports tree have been fixed, it is time to remove this
FreeBSDism
While here remove the extra parenthesis surrounding dprintf(3)
Our version of this function currently returns an integer indicating
failure or success, whereas POSIX specifies that this function has no
return value. It returns void. Patch up the header, sources and man page
to use the right type. While there, use the opportunity to simplify the
body of this function.
Theoretically speaking, this change breaks the ABI of this function.
That said, I have yet to find any code that makes use of freelocale()'s
return value. I couldn't find any of it in the base system, nor did an
exp-run reveal any breakage caused by this change.
PR: 211394 (exp-run)
Update the existing manual pages for basename(3) and dirname(3) to
mention that in future versions of FreeBSD, these functions will no
longer use internal buffers for storing the results.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7356
POSIX allows these functions to be implemented in a way that the
resulting string is stored in the input buffer. Though some may find
this annoying, this has the advantage that it makes it possible to
implement this function in a thread-safe way. It also means that they
can be implemented in a way that they work for paths of arbitrary
length, as the output string of these functions is never longer than
max(1, len(input)).
Portable code already needs to be written with this in mind, so in my
opinion it makes very little sense to allow the existing behaviour.
Prevent the base system from falling back to this by switching over to
POSIX prototypes.
I'm not going to bump the __FreeBSD_version for this. The reason is that
it's possible to account for this change in a portable way, without
depending on a specific version of FreeBSD. An exp-run was done some
time ago. As far as I know, all regressions as a result of this have
already been fixed.
I'll give this change some time to settle. In the long run I want to
replace our copies by ones that are thread-safe and don't depend on
PATH_MAX/MAXPATHLEN.
It looks like the msgrcv() system call is already written in such a way
that the size is internally computed as a size_t and written into all of
td_retval[0]. This means that it is effectively already returning
ssize_t. It's just that the userspace prototype doesn't match up.
POSIX also declares NI_NUMERICSCOPE, which makes getnameinfo() return a
numerical scope identifier. The interesting thing is that support for
this is already present in code, but #ifdef disabled. Expose this
functionality by placing a definition for it in <netdb.h>.
While there, remove references to NI_WITHSCOPEID, as that got removed 11
years ago.
POSIX requires that these functions have an unsigned int for their first
argument; not an unsigned long.
My reasoning is that we can safely change these functions without
breaking the ABI. As far as I know, our supported architectures either
use registers for passing function arguments that are at least as big as
long (e.g., amd64), or int and long are of the same size (e.g., i386).
Reviewed by: ache
Differential Revision: https://reviews.freebsd.org/D6644
case it fully constructed, but for half-constructed too, so have no
other choice to pass original pattern from glob() down to globextend()
instead of attempt to reconstruct I implement previously.
2) Instead of copy&paste the same big enough code, make function for it:
globfinal().
The asynchronous I/O changes made previously result in different
behavior out of the box. Previously all AIO requests failed with
ENOSYS / SIGSYS unless aio.ko was explicitly loaded. Now, some AIO
requests complete and others ("unsafe" requests) fail with EOPNOTSUPP.
Reword the introductory paragraph in aio(4) to add a general
description of AIO before describing the vfs.aio.enable_unsafe sysctl.
Remove the ENOSYS error description from aio_fsync(2), aio_read(2),
and aio_write(2) and replace it with a description of EOPNOTSUPP.
Remove the ENOSYS error description from aio_mlock(2).
Log a message to the system log the first time a process requests an
"unsafe" AIO request that fails with EOPNOTSUPP. This is modeled on
the log message used for processes using the legacy pty devices.
Reviewed by: kib (earlier version)
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7151
Old versions of gas produce an invalid section index. That is ignored by
old versions of ld, but prevents a link with lld.
Submitted by: Rafael Ávila de Espíndola (earlier version)
Reviewed by: allanjude
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6789
globexp1() recursive calls, but glob0() was not supposed to be called
repeatedly in the original code. It finalize results by possible adding
original pattern for no match case, may return GLOB_NOMATCH error and
by sorting all things. Original pattern adding or GLOB_NOMATCH error
can happens each time glob0() called repeatedly, and sorting happens
for one item only, all things are never sorted. Second, f.e. "a{a"
pattern does not match "a{a" file but match "a" file instead
(just one example, there are many). Third, some errors (f.e. for limits
or overflow) can be ignored by GLOB_BRACE code because it forces return (0).
Add non-finalizing flag to glob0() and make globexp0() wrapper around
recursively called globexp1() to finalize things like glob0() does.
Reorganize braces code to work correctly.
2) Don't allow MB_CUR_MAX * strlen overallocation hits GLOB_LIMIT_STRING
(ARG_MAX) limit, use final string length, not malloced space for it.
3) Revive DEBUG-ifdefed section.
unmodified, if no matches found. But our original code strips all '\'
returning it. Rewrite the code to allow to reconstruct exact the
original pattern with backslashes for this case.
2) Prevent to use truncated pattern if MAXPATHLEN exceeded, return
GLOB_NOMATCH instead.
3) Fix few end loop conditions filling Char arrays with mbrtowc(),
MB_CUR_MAX is unneeded in two places and condition is less by one
in other place.
4) Prevent to use truncated filenames match if MAXPATHLEN exceeded,
skip such directory entries.
5) Don't end *pathend with L'/' in glob3() if limit is reached, this
change will be not visible since error is returned.
6) If error happens in (*readdirfunc)(), do the same GLOB_ABORTED
processing as for g_opendir() as POSIX requires.
in any case and needed for further processing. For ~ expansion too.
2) Don't terminate *pathend with / when GLOB_LIMIT_STAT is reached, it will
be not visible outside in any case since error is returned.
3) Cosmetic: change if expression to better reflect its semantic.
since whole conversion needs a room for (len >= MB_CUR_MAX). It is no
difference when MB_CUR_MAX == 1, but for multi-byte locales last few chars
('\0' and before) may need just one byte, and the rest of MB_CUR_MAX - 1
space becomes unavailable in the MAXPATHLEN-sized buffer, which cause
conversion error on near MAXPATHLEN long pathes.
Increase g_Ctoc() conversion buffers to MB_LEN_MAX - 1.
as pattern meta chars.
2) GLOB_ERR and gl_errfunc are supposed to work only for real directories
per POSIX, so don't act on missing or plain files, for ENOENT or ENOTDIR
(as TODO in the code suggested).
3) Remove the hack in the manpage describing how to skip ENOENT and ENOTDIR
in gl_errfunc, it is unneeded now.
4) Set errno to ENAMETOOLONG if g_Ctoc() expansion fails in g_opendir(),
as in other places in the code which are wrappers around system functions.
open/read errors and with GLOB_ERR and gl_errfunc processing), so we can't
blindly return it on any MAXPATHLEN overflow. Even our manpage disagrees
with such GLOB_ABORTED usage. Use GLOB_NOSPACE for that now with errno is
set to 0 as for limits.
2) Return GLOB_NOSPACE when valid ~ expansion can't happens due to
MAXPATHLEN overflow too.
3) POSIX (and our manpage) says, if GLOB_ERR is set, GLOB_ABORTED should
be returned immediatelly, without using gl_errfunc. Implement it now.
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
Instead of using a hash table to convert physical page addresses to offsets
in the sparse page array, cache the number of bits set for each 4MB chunk of
physical pages. Upon lookup, find the nearest cached population count, then
add/subtract the number of bits from that point to the page's PTE bit.
Then multiply by page size and add to the sparse page map's base offset.
This replaces O(n) worst-case lookup with O(1) (plus a small number of bits
to scan in the bitmap). Also, for a 128GB system, a typical kernel core of
about 8GB will now only require ~4.5MB of RAM for this approach instead of
~48MB as with the hash table.
More concretely, /usr/sbin/crashinfo against the same core improves from a
max RSS of 188MB and wall time of 43.72s (33.25 user 2.94 sys) to 135MB and
9.43s (2.58 user 1.47 sys). Running "thread apply all bt" in kgdb has a
similar RSS improvement, and wall time drops from 4.44s to 1.93s.
Reviewed by: jhb
Sponsored by: Backtrace I/O
them down. This hack still remains:
* 2. Illegal byte sequences in filenames are handled by treating them as
* single-byte characters with a values of such bytes of the sequence
* cast to wchar_t.
2) Reword the comment in the hack above to reflect implementation.
3) Protect signed wchar_t from sign extension when a signed char is assigned
to it in the hack above.
3) Corresponding backward hack in g_Ctoc() was not implemented, so all
pathes with illegal byte sequences are skipped as result, implement it now.
4) globtilde() forget to convert expanded user home dir from multibyte to
wchar.
5) Protect globtilde() from long expansion truncation.
6) Results was not sorted according to collate as POSIX requires.
when importing collation support from Dragonfly/Illumos amdmi3@ tested the
collation branch and reported an issue with Russian collation. John Marino fixed
the issue in Dragonfly and I merged it back to FreeBSD.
Now that Illumos is working on merging our fixes they (Lauri Tirkkonen) found
issues with the commit that fixes the russian collation in UTF-8 that resulted
in a crash with strxfrm(3) and the ISO-8859-5 locale (fixed in FreeBSD r302916).
This small test was written to ensure we do not bring back the old issue with
russian collation while fixing the other issue.
ptrace() now stores a mask of optional events in p_ptevents. Currently
this mask is a single integer, but it can be expanded into an array of
integers in the future.
Two new ptrace requests can be used to manipulate the event mask:
PT_GET_EVENT_MASK fetches the current event mask and PT_SET_EVENT_MASK
sets the current event mask.
The current set of events include:
- PTRACE_EXEC: trace calls to execve().
- PTRACE_SCE: trace system call entries.
- PTRACE_SCX: trace syscam call exits.
- PTRACE_FORK: trace forks and auto-attach to new child processes.
- PTRACE_LWP: trace LWP events.
The S_PT_SCX and S_PT_SCE events in the procfs p_stops flags have
been replaced by PTRACE_SCE and PTRACE_SCX. PTRACE_FORK replaces
P_FOLLOW_FORK and PTRACE_LWP replaces P2_LWP_EVENTS.
The PT_FOLLOW_FORK and PT_LWP_EVENTS ptrace requests remain for
compatibility but now simply toggle corresponding flags in the
event mask.
While here, document that PT_SYSCALL, PT_TO_SCE, and PT_TO_SCX both
modify the event mask and continue the traced process.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7044
- Add a sigevent(3) manpage to give a general overview of the sigevent
structure and the available notification mechanisms.
- Document that AIO requests contain a nested sigevent structure that can
be used to request completion notification.
- Expand the sigevent details in other manuals to note details such as
the extra values stored in a queued signal's information or in a posted
kevent.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7122
- Update aio_return/waitcomplete wrappers for the ssize_t return type.
- Fix the aio_return() wrapper to fail with EINVAL on a pending job.
This matches the semantics of the in-kernel system call. Also,
aio_return() returns errors via errno, not via the return value.
Reviewed by: kib (earlier version)
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7120
locale (which cause core dump) by removing whole 'table' argument
by which it passed.
2) Restore __collate_range_cmp() in __sccl().
3) Collating [a-z] range in regcomp() only for single bytes locales
(we can't do it now for other ones). In previous state only first 256
wchars are considered and all others are just silently dropped from the
range.
Instead of changing whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and concentrace on fixing bugs in what we have now,
too many small obstacles instead, counting ports.
Only first 256 wide chars are considered currently, all other are just
dropped from the range. Proper implementation require reverse tables
database lookup, since objects are really big as max UTF-8 (1114112
code points), so just the same scanning as it was for 256 chars will
slow things down.
POSIX does not require collation for [a-z] type ranges and does not
prohibit it for non-POSIX locales. POSIX require collation for ranges
only for POSIX (or C) locale which is equal to ASCII and binary for
other chars, so we already have it.
No other *BSD implements collation for [a-z] type ranges.
Restore ABI compatibility with unused now __collate_range_cmp() which
is visible from outside (will be removed later).
Since r302216, thread suspension causes advisory file locks to restart
(instead of continuing to wait) and for a long time SA_RESTART has
affected advisory file locks. These are both not compliant to POSIX.1.
To clarify that restarting means something, add a paragraph about fair
queuing. Note that the network lock manager does not implement fair
queuing.
Reviewed by: kib (previous version)
Approved by: re (gjb)
r260553 added missing C++ typinfos to libcxxrt's version script.
It appears that a number of duplicate mangled symbols were added due to
a cut and paste error. Switch the second instances to _ZTS*,
typeinfo name for *.
Found by lld, which produces an error or warning for duplicate symbols.
Reviewed by: dim
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7011
This fixes the build when DESTDIR may be blank or not yet populated.
It also fixes reproducibility.
Submitted by: brooks
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6455
(WITH_SYSTEM_COMPILER: Enable by default) and it's prerequisite: r300354,
caused i386 builds to fail when cross-built on an amd64 host.
Reviewed by: bdrewery, delphij, gjb
Approved by: re (gjb)
