- On resume all registers have to be initialized again like after
power-on so reset sc_inited in gem_suspend() in order get all of
the registers set next time gem_init_regs() is called.
- On at least some ERI and GEM revisions GEM_MAC_RX_OVERFLOW happen
often due to a silicon bug and re-initializing is all we can do
about these errors so make handling them non-verbose.
- Remove a superfluous memset(3) call in gem_meminit(), all elements
are initialized to 0 anyway.
MFC after: 1 week
but vm_map_wire() fails, then a vm object, vm map entries, and kernel_map
free space is leaked and (2) unwiring is handled automatically by
vm_map_remove().
Suggested by: tegge
On entry or exit from the kernel the 'alltraps' and 'doreti' code
used taken by normal traps disables interrupts to protect the
critical sections where it is setting up %gs.
This protection is insufficient in the presence of NMIs since NMIs
can be taken even when the processor has disabled normal interrupts.
Thus the NMI handler needs to actually read MSR_GBASE on entry to
the kernel to determine whether a swap of %gs using 'swapgs' is
needed. However, reads of MSRs are expensive and integrating this
check into the 'alltraps'/'doreti' path would penalize normal
interrupts.
- Teach DDB about the 'nmi_calltrap' symbol.
Reviewed by: bde, peter (older versions of this change)
so that we do not call uiomove() while IFNET_RLOCK() is held.
This eliminates the witness warning:
Calling uiomove() with the following non-sleepable locks held:
exclusive sleep mutex ifnet r = 0 (0xc096dd60) locked @
/usr/src/sys/modules/linux/../../compat/linux/linux_ioctl.c:2170
MFC after: 2 days
attached.
This is caused by bpf_detachd clearing IFF_PROMISC on the interface which does
a SIOCSIFFLAGS ioctl. The problem here is that while the interface has been
stopped, IFF_UP has not been cleared so IFF_UP != IFF_DRV_RUNNING, this causes
the ioctl function to init() the interface which resets the callouts.
The destroy then completes and frees the softc but softclock will panic on a
dead callout pointer.
Ensure ifp->if_flags matches reality by clearing IFF_UP when we destroy.
Silence from: rwatson
Approved by: mlaier (mentor)
MFC after: 3 days
either reader or writer flag on item in the function, that
allocates the item. Do not modify these flags when item is
applied or queued.
The only exceptions are node and hook overrides - they can
change item flags to writer.
This way, the VINUMDRIVE class is loaded before the VINUM class,
but since geom does the tasting for newly arrived classes
last-in-first-out, the VINUM class tastes first.
This removes the need to call gv_parse_config() in the drive
taste path.
tulip_mbuf_compress(). If we fail to allocate a new mbuf to copy the
data into, put the mbuf back in the driver's send queue so that we can
retry it later rather than throwing the packet away.
- Use m_devget() instead of doing it inline ourselves in the
TULIP_COPY_RXDATA case. If we fail to allocate an mbuf to copy the data
into, don't forget about the original mbuf cluster. The old code would
lose the pointer and leak the cluster in that case. Now it doesn't lose
it but always sticks the original rx buffer back into the receive ring
after trying to copy the data out and send it up the stack. Also, if we
fail to allocate a new mbuf to copy the data into, log an input error.
Also, don't combine the priming case with the received-a-packet case to
make the code flow a bit clearer and easier to follow.
earlier as no one has stepped up to test recent changes to the driver.
Oddly, the module was actually turned on on ia64 though I'm fairly certain
that no ia64 machine has ever had or will ever have an ISA slot.
Axe borrowed from: phk
- if minfd < fd_freefile (as is most often the case, since minfd is
usually 0), set it to fd_freefile.
- remove a call to fd_first_free() which duplicates work already done
by fdused().
This change results in a small but measurable speedup for processes
with large numbers (several thousands) of open files.
PR: kern/85176
Submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
MFC after: 3 weeks
1. The amd64 pmap, unlike the i386 pmap, maintains a reference count
for each page directory (PD) page. However, in the transformation
of the i386 pmap into the amd64 pmap, operations, such as
pmap_copy() and pmap_object_init_pt(), that create 2MB "superpage"
mappings by setting the PG_PS bit in a PD entry were not modified
to adjust the underlying PD page's reference count. Consequently,
superpage mappings could disappear prematurely.
2. pmap_object_init_pt() could crash or corrupt memory if either the
virtual address range being mapped crosses a 1GB boundary in the
virtual address space or nothing is mapped in the 1GB area.
3. When pmap_allocpte() destroys a 2MB "superpage" mapping it does not
reduce the pmap's resident count accordingly. It should. (This
bug is inherited from i386.)
Discussed with: peter
Reviewed by: tegge
not exsist, do not have ioctl return an error, but instead set -1
in the data returned to the user. This allows the HP bios flash
utilities to work without requiring changes to their code.
Reviewed by: jhb
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
(This should really be using m_defrag(), but this diff is just simple
changes for now.)
- Allocate arrays of metadata for the descriptors in the rx and tx rings
and change the ring pointers to walk the metadata array rather than the
actual descriptor rings. Each metadata object contains a pointer to its
descriptor, a pointer to any associated mbuf, and a pointer to the
associated bus_dmamap_t in the bus_dma case. The mbuf pointers replace
the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
defaults to 0, but can be changed to KTR_DEV at the top of the file
when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
Also, remove an incorrect XXX comment I added earlier, the driver was
correct (at least it does the same thing dc(4) does). TULIP_SP_MAC
was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
so it becomes easier to read at the expense of a couple of duplicated
lines of code. Also, use m_getcl() to get an mbuf cluster rather than
MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
fixup attach to do a better job of cleaning up when it fails. This
gets us a good bit closer to possibly having a detach method someday
and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.
I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on. I'll be removing the non-bus-dma code in a subsequent
commit.
the code, i.e. ng_fec_init() is called with the ifp->if_softc pointer and
NOT with the ifp pointer.
PR: kern/85239
Reviewed by: brooks
MFC after: 1 day
through locking; leave some spl references around code where there
are open questions about global variable references. Also, add
an XXX regarding locking in sysctl.
MFC after: 3 days
ARP requests only on the network where this IP address belong, to.
Before this change we did replied on all interfaces. This could
lead to an IP address conflict with host we are doing ARP proxy
for.
PR: kern/75634
Reviewed by: andre
cooling thread which refers psv, tc1, tc2 and tsp. The previous
code made the period where sc->tz_zone.tsp was zero, and it caused
panic at msleep().
Reported by: keramida
Tested by: keramida
it fixes. I believe the problem lives somewhere outside ng_ksocket,
but until it is found, let the node be working.
PR: kern/84952
PR: kern/82413
MFC after: 3 days
if an indirect relationship exists (keep both A->B->C and A->C).
This allows witness_checkorder() to use isitmychild() instead of
the much more expensive isitmydescendant() to check for valid lock
ordering.
Don't do an expensive tree walk to update the w_level values when
the tree is updated. Only update the w_level values when using the
debugger to display the tree.
Nuke the experimental "witness_watch > 1" mode that only compared
w_level for the two locks. This information is no longer maintained
at run time, and the use of isitmychild() in witness_checkorder
should bring performance close enough to the acceptable level that
this hack is not needed.
Report witness data structure allocation statistics under the
debug.witness sysctl.
Reviewed by: jhb
MFC after: 30 days
and detach() since mtx_lock() will assert that already since the driver
lock is not recursive.
- Move the call to callout_init_mtx() before hme_stop() so that the
callout_stop() in hme_stop() doesn't operate on an uninitialized callout
structure during attach.
Reported by: yongari (2)
MFC after: 3 days
between sack and a bug in the "bad retransmit recovery" logic. This is
a workaround, the underlying bug will be fixed later.
Submitted by: Mohan Srinivasan, Noritoshi Demizu
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.
Submitted by: Anish Mistry
actually 1514, so comparing the mbuf length which includes the Ethernet header
to the interface MTU is wrong.
The check was a little over the top so just remove it.
Approved by: mlaier (mentor)
MFC after: 3 days
vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode
lock aggravates an existing race condition. It is also undesirable
according to the commit log for 1.631.
Fix the tiny race condition that remains by rechecking the vnode
state after grabbing the vnode lock and grabbing the vnode interlock.
Fix the problem of other threads being starved (which 1.636 attempted
to fix by removing LK_NOWAIT) by calling uio_yield() periodically
in vlrureclaim(). This should be more deterministic than hoping
that VOP_LOCK() without LK_NOWAIT will block, which may not happen
in this loop.
Reviewed by: kan
MFC after: 5 days
enhance the security of bpf(4) by further relinquishing the privilege of
the bpf(4) consumer (assuming the ioctl commands are being implemented).
Once BIOCLOCK is executed, the device becomes locked which prevents the
execution of ioctl(2) commands which can change the underly parameters of the
bpf(4) device. An example might be the setting of bpf(4) filter programs or
attaching to different network interfaces.
BIOCSETWF can be used to set write filters for outgoing packets. Currently if
a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used
as a raw socket, regardless of consumer's UID. Write filters give users the
ability to constrain which packets can be sent through the bpf(4) descriptor.
These features are currently implemented by a couple programs which came from
OpenBSD, such as the new dhclient and pflogd.
-Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify
whether a read or write filter is to be set.
-Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the
filter program on the mbuf data once we move the packet in from user-space.
-Rather than execute two uiomove operations, (one for the link header and the
other for the packet data), execute one and manually copy the linker header
into the sockaddr structure via bcopy.
-Restructure bpf_setf to compensate for write filters, as well as read.
-Adjust bpf(4) stats structures to include a bd_locked member.
It should be noted that the FreeBSD and OpenBSD implementations differ a bit in
the sense that we unconditionally enforce the lock, where OpenBSD enforces it
only if the calling credential is not root.
Idea from: OpenBSD
Reviewed by: mlaier
specifies a PMC capability (e.g., sampling) that is not supported
by hardware. Return EINVAL early if the PMC class passed in is
not recognized.
MFC after: 3 days
TTL a packet must have when received on a socket. All packets with a
lower TTL are silently dropped. Works on already connected/connecting
and listening sockets for RAW/UDP/TCP.
This option is only really useful when set to 255 preventing packets
from outside the directly connected networks reaching local listeners
on sockets.
Allows userland implementation of 'The Generalized TTL Security Mechanism
(GTSM)' according to RFC3682. Examples of such use include the Cisco IOS
BGP implementation command "neighbor ttl-security".
MFC after: 2 weeks
Sponsored by: TCP/IP Optimization Fundraise 2005
cluster if needed.
Fixes the TCP issues raised in I-D draft-gont-icmp-payload-00.txt.
This aids in-the-wild debugging a lot and allows the receiver to do
more elaborate checks on the validity of the response.
MFC after: 2 weeks
Sponsored by: TCP/IP Optimization Fundraise 2005
than ~PDRMASK to extract the physical address of a superpage from a PDE.
The use of ~PDRMASK is problematic if the PDE has PG_NX set. Specifically,
the PG_NX bit will be included in the physical address if ~PDRMASK is used.
Reviewed by: peter
depends, like all other pccard drivers, indirectly through kobj on
pccard. Therefore, it is not appropriate to force pccard to be loaded
when if_ral.ko is loaded. This makes it possible to load if_ral w/o
loading pccard.ko on, eg, pci only systems.
packet in an ICMP reply. The minimum of 8 bytes is internally
enforced. The maximum quotation is the remaining space in the
reply mbuf.
This option is added in response to the issues raised in I-D
draft-gont-icmp-payload-00.txt.
MFC after: 2 weeks
Spnsored by: TCP/IP Optimizations Fundraise 2005
the IP address the packet came through in. This is useful for routers
to show in traceroutes the actual path a packet has taken instead of
the possibly different return path.
The new sysctl is named net.inet.icmp.reply_from_interface and defaults
to off.
MFC after: 2 weeks
is a workaround for non-symetric teardown of the file systems at
shutdown with respect to the mount order at boot. The proper long term
fix is to properly detach devfs from the root mount before unmounting
each, and should be implemented, but since the problem is non-harmful,
this temporary band-aid will prevent false positive bug reports and
unnecessary error output for 6.0-RELEASE.
MFC after: 3 days
Tested by: pav, pjd
o management of multiple tx rings (up to 4)
o setting of WME IE in association requests
Some features are still missing though, like the possibility to override
the default cwmin/cwmax/asfn values of each tx queues.
it to __MINSIGSTKSZ. Define MINSIGSTKSZ in <sys/signal.h>.
This is done in order to use MINSIGSTKSZ for the macro PTHREAD_STACK_MIN
in <pthread.h> (soon <limits.h>) without having to include the whole
<sys/signal.h> header.
Discussed with: bde
sizeof(struct g_eli_metadata) will return the exact number of bytes needed
for storing it on the disk.
Without this change GELI was unusable on amd64 (and probably other 64-bit
archs), because sizeof(struct g_eli_metadata) was greater than 512 bytes
and geli(8) was failing on assertion.
Reported by: Michael Reifenberger <mike@Reifenberger.com>
MFC after: 3 days
128 bytes, 256 bytes, and 32 bytes respectively. This makes it much
easier to identify when two kernels are identical apart from a version
number bump (as often happens on security branches).
Discussed on: freebsd-arch, in May 2005
- Remove a lot of superfluous locking during attach. There is no need
to lock access to the driver until some other thread has a way of getting
to it. For ethernet drivers the other ways include registering an
interrupt handler via bus_setup_intr(), calling ether_ifattach() to hook
into the network stack, and kicking off a callout-driven timer via
callout_reset().
- Use callout_* rather than timeout/untimeout.
- Break out of xl_rxeof() if IFF_DRV_RUNNING is clear after ifp->if_input
returns to handle the case where the interface was stopped while we were
passing a packet up the stack. Don't call xl_rxeof() in xl_rxeof_task()
unless IFF_DRV_RUNNING is set. With these fixes in place, any
outstanding task will gracefully terminate as soon as it gets a chance to
run after the interface has been stopped via xl_stop(). As a result,
taskqueue_drain() is no longer required in xl_stop(). The task is still
drained in detach() however to make sure that detach() can safely destroy
the driver mutex at the end of the function.
- Lock the driver lock in the ifmedia callouts and don't lock across
ifmedia_ioctl() in xl_ioctl().
Note: glebius came up with most of (3) as well independently. I took a
rather roundabout way of arriving at the same conclusion.
MFC after: 3 days
- Add locked versions of start and init. The SRM_MEDIA code in dc_init()
stayed in dc_init() instead of moving to dc_init_locked() to make the
locking saner.
- Use callout_init_mtx().
- Fixup locking in detach and ioctl.
- Lock the driver in the ifmedia callouts.
- Don't recurse on the driver lock.
- De-spl.
MFC after: 3 days
struct ifnet most of if_findindex() become a complex no-op. Remove it
and replace it with a corrected version of the four line for loop it
devolved to plus some error handling. This should probably be replaced
with subr_unit at some point.
Switch from checking ifaddr_byindex to ifnet_byindex when looking for
empty indexes. Since we're doing this from if_alloc/if_free, we can
only be sure that ifnet_byindex will be correct. This fixes panics when
loading the ef(4) module. The panics were caused by the fact that
if_alloc was called four time before if_attach was called and thus
ifaddr_byindex was not set and the same unit was allocated again. This
in turn caused the first if_attach to fail because the ifp was not the
one in ifnet_byindex(ifp->if_index).
Reported by: "Wojciech A. Koszek" <dunstan at freebsd dot czest dot pl>
PR: kern/84987
MFC After: 1 day
- Add locked variants of start, init, and ifmedia_upd.
- Use callout_* instead of timeout/untimeout.
- Don't recurse on the driver lock.
- Fixup locking in ioctl.
- Lock the driver lock in the ifmedia handlers rather than across
ifmedia_ioctl().
Tested by: brueffer
MFC after: 3 days
is not defined, so that the module will get the
compatibility options from the current kernel configuration
if built with the latter, not with the world.
[Some other modules seem in need of fixing WRT this, too.]
Add more compatibility options found in GENERIC to the default
opt_compat.h. While not all of them are used in the procfs code,
we can't tell for sure if the system .h files don't need them either,
so let's stay on the safe side.
Submitted by: kensmith
Reviewed by: ru
interrupt comes in later on, which can happen in some uncommon cases.
Another possible fix is to call re_detach() instead of re_stop(), like
ve(4) does, but I am not sure if the latter is really RTTD, so that stick
with this one-liner for now.
PR: kern/80005
Approved by: silence on -arch, no reply from selected network gurus
This is actually a local DoS, as every user can use /dev/crypto if there
is crypto hardware in the system and cryptodev.ko is loaded (or compiled
into the kernel).
Reported by: Mike Tancsa <mike@sentex.net>
MFC after: 1 day
than one interface in one subnet. However, some userland apps rely on
the believe that this configuration is impossible.
Add a sysctl switch net.inet.ip.same_prefix_carp_only. If the switch
is on, then kernel will refuse to add an additional interface to
already connected subnet unless the interface is CARP. Default
value is off.
PR: bin/82306
In collaboration with: mlaier
the serial console speed (i386 and amd64 only). If the previous
stage boot loader requested a serial console (RB_SERIAL or RB_MULTIPLE)
then the default speed is determined from the current serial port
speed. Otherwise it is set to 9600 or the value of BOOT_COMCONSOLE_SPEED
at compile time.
This makes it possible to set the serial port speed once in
/boot.config and the setting will propagate to boot2, loader and
the kernel serial console.
/boot.config or on the "boot:" prompt line via a "-S<speed>" flag,
e.g. "-h -S19200". This adds about 50 bytes to the size of boot2
and required a few other small changes to limit the size impact.
This changes only affects boot2; there are further loader changes
to follow.
r_gdt -> saved_gdt
r_idt -> saved_idt
r_ldt -> saved_ldt
in order to prevent clashes with variables with same names
defined in <machine/segments.h>. This fixes compilation of this
file with GCC 4.0.
Reviewed by: njl
- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
all multicast due to limits in the MAC receive filters in hardware.
Requested by: rwatson (2)
that if softclock is running on another CPU and is blocked on our driver
lock, we will wait until it has acquired the lock, seen that it was
cancelled, dropped the lock, and awakened us so that we can safely destroy
the mutex.
MFC after: 3 days
- Add locked variants of el_init and el_start.
- Don't initialize the mutex and lock it during el_probe().
- Do initialize the mutex during attach. (el_probe() did destroy the mutex
to cleanup, so this meant the driver was always using a destroyed mutex
when it was running.)
- Setup the interrupt handler after ether_ifattach().
- Fix locking in el_detach() and el_ioctl().
Note: Since I couldn't actually find anyone with this hardware, I'm going
ahead and committing these changes so they won't be lost. I'll remove the
driver in a week (real purpose of the MFC after below) unless someone pipes
up to test this.
MFC after: 1 week
Tested by: gcc(1)
effect. since CPU speed is restored by degrees, we cannot use
the facility of saving cpu speed by CPUFREQ_set() effectively.
so, we need to save the value when passive cooling is in effect.
Repoeted by: Kevin Oberman <oberman__at__es.net>
or unreadable blocks, make sure to destroy the mutex we created.
Also fix an unrelated typo in a comment.
Found by: Peter Holm's stress tests
Reviewed by: dwmalone
MFC after: 3 days
by md(4). Before this change, it was possible to by-pass these flags
by creating memory disks which used a file as a backing store and
writing to the device.
This was discussed by the security team, and although this is problematic,
it was decided that it was not critical as we never guarantee that root will
be restricted.
This change implements the following behavior changes:
-If the user specifies the readonly flag, unset write operations before
opening the file. If the FWRITE mask is unset, the device will be
created with the MD_READONLY mask set. (readonly)
-Add a check in g_md_access which checks to see if the MD_READONLY mask
is set, if so return EROFS
-Do not gracefully downgrade access modes without telling the user. Instead
make the user specify their intentions for the device (assuming the file is
read only). This seems like the more correct way to handle things.
This is a RELENG_6 candidate.
PR: kern/84635
Reviewed by: phk
- Add locked variants of my_start() and my_init().
- Assert that the lock is held in several places rather than recursing.
- Overhaul failure case handling in my_attach() so that it will actually
clean up completely in each of the failure cases.
- Setup the interrupt after ether_ifattach() in my_attach().
- Remove unused callout handle from softc.
- Free the metadata for the descriptors my_in detach() (we leaked it
before).
- Fix locking in my_ioctl().
- Remove spls.
Tested by: brueffer
MFC after: 3 days
It checked other algorithms against this bug and it seems they aren't
affected.
Reported by: Mike Tancsa <mike@sentex.net>
PR: i386/84860
Reviewed by: phk, cperciva(x2)
- Add a note that additions should be made to if_free_type and not
if_free to help avoid this in the future.
This apparently fixes a use after free in if_bridge and may fix bugs
in other direct if_free_type consumers.
Reported by: thompsa
archs and enable splash(4) by default (the non-working screen savers
either don't compile or just have no effect when loaded, i.e. don't
cause harm).
MFC after: 1 week
which serial device to use in that case respectively to not rely on
the OFW names of the input/output and stdin/stdout devices. Instead
check whether input and output refers to the same device and is of
type serial (uart(4) was already doing this) and for the fallback
to a serial console in case a keyboard is the selected input device
but unplugged do the same for stdin and stdout in case the input
device is nonexistent (PS/2 and USB keyboards) or has a 'keyboard'
property (RS232 keyboards). Additionally also check whether the OFW
did a fallback to a serial console in the same way in case the
output device is nonexistent. While at it save on some variables
and for sys/boot/sparc64/loader/metadata.c move the code in question
to a new function md_bootserial() so it can be kept in sync with
uart_cpu_getdev_console() more easily.
This fixes selecting a serial console and the appropriate device
when using a device path for the 'input-device' and 'output-device'
OFW environment variables instead of an alias for the serial device
to use or when using a screen alias that additionally denotes a
video mode (like e.g. 'screen:r1024x768x60') but no keyboard is
plugged in (amongst others). It also makes the code select a serial
console in case the OFW did the same due to a misconfiguration like
both 'input-device' and 'output-device' set to 'keyboard' or to a
nonexisting device (whether the OFW does a fallback to a serial
console in case of a misconfiguration or one ends up with just no
console at all highly depends on the OBP version however).
- Reduce the size of buffers that only ever need to hold the string
'serial' accordingly. Double the size of buffers that may need to
hold a device path as e.g. '/pci@8,700000/ebus@5/serial@1,400000:a'
exceeds 32 chars.
- Remove the package handle of the '/options' node from the argument
list of uart_cpu_getdev_dbgport() as it's unused there and future
use is also unlikely.
MFC after: 1 week
When a drive is newly created, it's state is initially set to 'down',
so it won't allow saving the config to it (thus it will never know of
itself being created). Work around this by adding a new flag, that's
also checked when saving the config to a drive.
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
points in lookup(). The lock can be dropped safely around VFS_ROOT because
LOCKPARENT semantics with child and perent vnodes coming from different FSes
does not really have any meaningful use. On the other hard, this prevents
easily triggered deadlock on systems using automounter daemon.
some of the options test, specifically the joliet and rockridge tests.
Since the root mount callchain doesn't go through cd9660_cmount, the
default mount options aren't set. Rather than having the main codepath
assume the options are there, test for the absence of the inverted
optioin
e.g. instead of vfs_flagopt(.. "joliet" ..), test for
!vfs_flagopt(.. "nojoliet" ..)
This works for root mount, non-root mount and future nmount cases.
- in cd9660_cmount, remove inadvertent setting of "gens" when "extatt"
was set.
Reported by: grehan, Dario Freni <saturnero at freesbie org>
Tested by: Dario Freni
Not objected to by: phk
MFC after: 3 days
high FP registers. It was not that the IPI got lost due to the
perceived unreliability of the IPI delivery, but rather that the
IPI was not assigned a vector (ugh). Sending a 0 vector to a CPU
results in a stray external interrupt.
Add a KASSERT to ipi_send() to catch this. The initialization of
the IPIs could be better, but it's not at all sure what the future
of the code is. Avoid wasting a lot of time on something that is
going to be rewritten anyway.
vm_pager_init() is run before required nswbuf variable has been set
to correct value. This caused system to run with single pbuf available
for vnode_pager. Handle both cluster_pbuf_freecnt and vnode_pbuf_freecnt
variable in the same way.
Reported by: ade
Obtained from: alc
MFC after: 2 days
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
* Correct handling of IPv6 Extension Headers.
* Add unreach6 code.
* Add logging for IPv6.
Submitted by: sysctl handling derived from patch from ume needed for ip6fw
Obtained from: is_icmp6_query and send_reject6 derived from similar
functions of netinet6,ip6fw
Reviewed by: ume, gnn; silence on ipfw@
Test setup provided by: CK Software GmbH
MFC after: 6 days
the procfs module by creating opt_compat.h with
appropriate compatibility options: COMPAT_43 on all
arch's and COMPAT_IA32 in addition on amd64.
Pointy hat to: peter
MFC after: 3 days
incoming ARP packet and route request adding/removing
ARP entries. The root of the problem is that
struct llinfo_arp was accessed without any locks.
To close race we will use locking provided by
rtentry, that references this llinfo_arp:
- Make arplookup() return a locked rtentry.
- In arpresolve() hold the lock provided by
rt_check()/arplookup() until the end of function,
covering all accesses to the rtentry itself and
llinfo_arp it refers to.
- In in_arpinput() do not drop lock provided by
arplookup() during first part of the function.
- Simplify logic in the first part of in_arpinput(),
removing one level of indentation.
- In the second part of in_arpinput() hold rtentry
lock while copying address.
o Fix a condition when route entry is destroyed, while
another thread is contested on its lock:
- When storing a pointer to rtentry in llinfo_arp list,
always add a reference to this rtentry, to prevent
rtentry being destroyed via RTM_DELETE request.
- Remove this reference when removing entry from
llinfo_arp list.
o Further cleanup of arptimer():
- Inline arptfree() into arptimer().
- Use official queue(3) way to pass LIST.
- Hold rtentry lock while reading its structure.
- Do not check that sdl_family is AF_LINK, but
assert this.
Reviewed by: sam
Stress test: http://www.holm.cc/stress/log/cons141.html
Stress test: http://people.freebsd.org/~pho/stress/log/cons144.html
- rt0 passed to rt_check() must not be NULL, assert this.
- rt returned by rt_check() must be valid locked rtentry,
if no error occured.
o Modify callers, so that they never pass NULL rt0
to rt_check().
Reviewed by: sam, ume (nd6.c)
#if 0.
- Use pci_enable_busmaster() to enable busmastering instead of frobbing
the command register directly.
- Don't check to see if memory or I/O can be enabled by writing to the
command register. The PCI bus driver's bus_alloc_resource() method
already checks this and will fail if it can't enable the bit.
everywhere. This means that my_unit is no longer used as well. The
watchdog routine now also prints 'my0: ...' rather than 'm0x0: ...'.
- Don't bzero the softc and don't try to free it in detach or if attach
fails.
- A whitespace fix.
- Use the driver lock instead of Giant in a bus dma callback.
- Clear IFF_DRV_(RUNNING|OACTIVE) in hme_stop() instead of just clearing
RUNNING in hme_ioctl() to be more like other ethernet drivers.
- Lock the driver lock around mii operations.
- Remove spls.
- Cleanup locking in hme_ioctl().
MFC after: 1 week
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
due to the vm object being locked.
When a process writes large amounts of data to a file, the vm object associated
with that file can contain most of the physical pages on the machine. If the
process is preempted while holding the lock on the vm object, pagedaemon would
be able to move very few pages from PQ_INACTIVE to PQ_CACHE or from PQ_ACTIVE
to PQ_INACTIVE, resulting in unlimited cleaning of dirty pages belonging to
other vm objects.
Temporarily unlock the page queues lock while locking vm objects to avoid lock
order violation. Detect and handle relevant page queue changes.
This change depends on both the lock portion of struct vm_object and normal
struct vm_page being type stable.
Reviewed by: alc
to atomically return either an existing set of IP multicast options for the
PCB, or a newlly allocated set with default values. The inpcb is returned
locked. This function may sleep.
Call ip_moptions() to acquire a reference to a PCB's socket options, and
perform the update of the options while holding the PCB lock. Release the
lock before returning.
Remove garbage collection of multicast options when values return to the
default, as this complicates locking substantially. Most applications
allocate a socket either to be multicast, or not, and don't tend to keep
around sockets that have previously been used for multicast, then used for
unicast.
This closes a number of race conditions involving multiple threads or
processes modifying the IP multicast state of a socket simultaenously.
MFC after: 7 days
list lock, as there has been a report that an alternative lock order
is getting introduced. This should help ferret it out.
Reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
device driver, owned by the network stack, or initialized by the device
driver before attach and read-only from then on.
Not all device drivers and network stack components currently follow
these rules, especially with respect to IFF_UP, and a few exceptions
with IFF_ALLMULTI.
MFC after: 7 days
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
and move both flags from ifnet.if_flags to ifnet.if_drv_flags, making
and documenting the locking of these flags the responsibility of the
device driver, not the network stack. The flags for these two fields
will be mutually exclusive so that they can be exposed to user space as
though they were stored in the same variable.
Provide #defines to provide the old names #ifndef _KERNEL, so that user
applications (such as ifconfig) can use the old flag names. Using the
old names in a device driver will result in a compile error in order to
help device driver writers adopt the new model.
When exposing the interface flags to user space, via interface ioctls
or routing sockets, or the two fields together. Since the driver flags
cannot currently be set for user space, no new logic is currently
required to handle this case.
Add some assertions that general purpose network stack routines, such
as if_setflags(), are not improperly used on driver-owned flags.
With this change, a large number of very minor network stack races are
closed, subject to correct device driver locking. Most were likely
never triggered.
Driver sweep to follow; many thanks to pjd and bz for the line-by-line
review they gave this patch.
Reviewed by: pjd, bz
MFC after: 7 days
- Push 'i' into the only block where it is used.
- Remove redundant check for rt being NULL. If rt_check() hasn't
returned an error, then rt is valid.
Reviewed by: gnn
m_copym(m, 0, M_COPYALL, how).
This is required for strict alignment architectures where we align the IP
header in the input path but m_copym() will create an unaligned copy in
bridge_broadcast(). m_copypacket() preserves alignment of the first mbuf.
Noticed by: Petri Simolin
Approved by: mlaier (mentor)
MFC after: 3 days
not holding any non-sleep-able-locks locks when copyin is called.
This gets executed un-conditionally since we have no function
to wire the buffer in this direction.
Pointed out by: truckman
MFC after: 1 week
the timeout routine.
- Fix locking in detach.
- Add locking in shutdown.
- Don't mess with the PCI command register in resume, the PCI bus driver
already does this for us.
- Add locking to the non-serial ifmedia routines.
- Fix locking in ioctl.
- Remove spls and support for 4.x.
MFC after: 1 week
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do. This avoids having multiple event handler types and
fall-back/precedence logic in devfs.
This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.
Requested by: phk
MFC after: 3 days
I copied strcasecmp() from userland to the kernel and it didn't worked!
I started to debug the problem and I find out that this line:
while (tolower(*us1) == tolower(*us2++)) {
was adding _3_ bytes to 'us2' pointer. Am I loosing my minds here?!...
No, in-kernel tolower() is a macro which uses its argument three times.
Bad tolower(9), no cookie.
the buffer has not been wired and we are holding any non-sleep-able locks,
drop a witness warning. If the buffer has not been wired, it is possible
that the writing of the data can sleep, especially if the page is not in
memory. This can result in a number of different locking issues, including
dead locks.
MFC after: 1 week
Discussed with: rwatson
Reviewed by: jhb
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
entry points that will be inserted over the life-time of the 6.x branch,
including for:
- New struct file labeling (void * already added to struct file), events,
access control checks.
- Additional struct mount access control checks, internalization/
externalization.
- mac_check_cap()
- System call enter/exit check and event.
- Socket and vnode ioctl entry points.
MFC after: 3 days
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
made in pmap_protect(): The pmap's resident count should not be reduced
unless mappings are removed.
The errant change to the pmap's resident count could result in a later
pmap_remove() failing to remove any mappings if the errant change has set
the pmap's resident count to zero.
o Allocate a VHPT per CPU. The VHPT is a hash table that the CPU
uses to look up translations it can't find in the TLB. As such,
the VHPT serves as a level 1 cache (the TLB being a level 0 cache)
and best results are obtained when it's not shared between CPUs.
The collision chain (i.e. the hash bucket) is shared between CPUs,
as all buckets together constitute our collection of PTEs. To
achieve this, the collision chain does not point to the first PTE
in the list anymore, but to a hash bucket head structure. The
head structure contains the pointer to the first PTE in the list,
as well as a mutex to lock the bucket. Thus, each bucket is locked
independently of each other. With at least 1024 buckets in the VHPT,
this provides for sufficiently finei-grained locking to make the
ssolution scalable to large SMP machines.
o Add synchronisation to the lazy FP context switching. We do this
with a seperate per-thread lock. On SMP machines the lazy high FP
context switching without synchronisation caused inconsistent
state, which resulted in a panic. Since the use of the high FP
registers is not common, it's possible that races exist. The ia64
package build has proven to be a good stress test, so this will
get plenty of exercise in the near future.
o Don't use the local ID of the processor we want to send the IPI to
as the argument to ipi_send(). use the struct pcpu pointer instead.
The reason for this is that IPI delivery is unreliable. It has been
observed that sending an IPI to a CPU causes it to receive a stray
external interrupt. As such, we need a way to make the delivery
reliable. The intended solution is to queue requests in the target
CPU's per-CPU structure and use a single IPI to inform the CPU that
there's a new entry in the queue. If that IPI gets lost, the CPU
can check it's queue at any convenient time (such as for each
clock interrupt). This also allows us to send requests to a CPU
without interrupting it, if such would be beneficial.
With these changes SMP is almost working. There are still some random
process crashes and the machine can hang due to having the IPI lost
that deals with the high FP context switch.
The overhead of introducing the hash bucket head structure results
in a performance degradation of about 1% for UP (extra pointer
indirection). This is surprisingly small and is offset by gaining
reasonably/good scalable SMP support.
allocating a VHPT per CPU. Since we don't yet know how many CPUs
are actually in the system at the time we need to allocate the
VHPTs, we allocate for MAXCPU processors. This can result in a
lot of wasted space for 2-way machines. So, for now, limit MAXCPU
to something smaller until we have something more dynamic.
integer to an unsigned long. This lifts variables like the maximum
number of pages available for shared memory from 2^31 to 2^32 on 32
bit architectures, and from 2^31 to 2^64 on 64 bit architectures.
It should be noted that this changes breaks ABI on 64 bit architectures
because the size of the shmmax, shmmin, shmmni, shmseg and shmall members
of the shminfo structure has changed.
Silence on: current@
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
vnode is inactivated), possibly leading to a NULL dereference when
checking if the mount wants knotes to be activated in the VOP hooks.
So, we add a new vnode flag VV_NOKNOTE that is only set in getnewvnode(),
if necessary, and check it when activating knotes.
Since the flags are not erased when a vnode is being held, we can safely
read them.
Reviewed by: kris@
MFC after: 3 days
Previously, we used all info (including -1 or "not present") which would
keep the system from reaching 100% when charging.
Reported by: Eric Anderson
MFC after: 2 days
- Add locked versions of the init() and start() methods.
- Use callout_*() rather than timeout().
- Make the driver lock non-recursive.
- Push down locking in detach() and ioctl().
- Fix the tick routine to bail if the interface has been stopped and use
callout_drain() in detach() after the call to stop().
- Lock the driver lock in the ifmedia handlers.
Tested by: Ketrien I. Saihr-Kesenchedra ketrien at error404.nls.net
MFC after: 1 week
0. This means that we 'succeed' the attach, even after we've freed
the internal data bits. This leads to a panic when you eject the card
with this problem.
Set error = ENXIO in the mac read zeros case.
if_attach(). This allows ethernet drivers to use it in their routines
to program their MAC filters before ether_ifattach() is called (de(4) is
one such driver). Also, the if_addr mutex is destroyed in if_free()
rather than if_detach(), so there was another potential bug in that a
driver that failed during attach and called if_free() without having
called ether_ifattach() would have tried to destroy an uninitialized mutex.
Reported by: Holm Tiffe holm at freibergnet dot de
Discussed with: rwatson
as opt_vmpage.h will not be available to user space library builds. A
similar existing check is present for KLD_MODULE for similar reasons.
MFC after: 3 days
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.
Reported by: flz
MFC after: 3 days
lists, as well as accessor macros. For now, this is a recursive mutex
due code sequences where IPv4 multicast calls into IGMP calls into
ip_output(), which then tests for a multicast forwarding case.
For support macros in in_var.h to check multicast address lists, assert
that in_multi_mtx is held.
Acquire in_multi_mtx around iteration over the IPv4 multicast address
lists, such as in ip_input() and ip_output().
Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses,
as well as over the manipulation of ifnet multicast address lists in order
to keep the two layers in sync.
Lock down accesses to IPv4 multicast addresses in IGMP, or assert the
lock when performing IGMP join/leave events.
Eliminate spl's associated with IPv4 multicast addresses, portions of
IGMP that weren't previously expunged by IGMP locking.
Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded
lock order in WITNESS, in that order.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 10 days
holders. The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.
MFC: 1 day
caller by saving the stack of the last locker/unlocker in lockmgr. We
also put the stack in KTR at the moment.
Contributed by: Antoine Brodin <antoine.brodin@laposte.net>
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
using ifp->if_addr_mtx:
- Initialize if_addr_mtx when ifnet is initialized.
- Destroy if_addr_mtx when ifnet is torn down.
- Rename ifmaof_ifpforaddr() to if_findmulti(); assert if_addr_mtx.
Staticize.
- Extract ifmultiaddr allocation and initialization into if_allocmulti();
accept a 'mflags' argument to indicate whether or not sleeping is
permitted. This centralizes error handling and address duplication.
- Extract ifmultiaddr tear-down and deallocation in if_freemulti().
- Re-structure if_addmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Make use of non-sleeping allocations. Annotate the fact that we only
generate routing socket events for explicit address addition, not
implicit link layer address addition.
- Re-structure if_delmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Annotate the lack of a routing socket event for implicit link layer
address removal.
- De-spl all and sundry.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
ifp->if_resolvemulti(), do so with M_NOWAIT rather than M_WAITOK, so
that a mutex can be held over the call. In the FDDI code, add a
missing M_ZERO. Consumers are already aware that if_resolvemulti()
can fail.
MFC after: 1 week
lists. Add accessor macros.
This changes the size of struct ifnet, but ideally, all ifnet consumers
are now using if_alloc() to allocate these structures rather than
embedding them into device driver softc's, so this won't modify the
network device driver ABI.
MFC after: 1 week
- Conforming to the latest ether_ifattach() change;
- Moving PCCARD_API_LEVEL to the right place.
Reported and Tested by: Vladimir Grebenschikov <vova at fbsd dot ru>
MFC after: 3 days
FreeBSD specific ip_newid() changes NetBSD does not have.
Correct handling of non AF_INET packets passed to bpf [2].
PR: kern/80340[1], NetBSD PRs 29150[1], 30844[2]
Obtained from: NetBSD ip_gre.c rev. 1.34,1.35, if_gre.c rev. 1.56
Submitted by: Gert Doering <gert at greenie.muc.de>[2]
MFC after: 4 days
primary vendor id for this device. The location is empty because ISA
doesn't give one a way to generally locate a card. PNP BIOS entries
do provide a way to locate cards, as do isa pnp cards. These
locations will be added as soon as the code to remember them is
written.
1. Support wide range sampling rate, as low as 1hz up to int32 max
(which is, insane) through new feeder_rate, multiple precisions
choice (32/64 bit converter). This is indeed, quite insane, but it
does give us more room and flexibility. Plenty sysctl options to
adjust resampling characteristics.
2. Support 24/32 bit pcm format conversion through new, much improved,
simplified and optimized feeder_fmt.
Changes:
1. buffer.c / dsp.c / sound.h
* Support for 24/32 AFMT.
2. feeder_rate.c
* New implementation of sampling rate conversion with 32/64 bit
precision, 1 - int32max hz (which is, ridiculous, yet very
addictive). Much improved / smarter buffer management to not
cause any missing samples at the end of conversion process
* Tunable sysctls for various aspect:
hw.snd.feeder_rate_ratemin - minimum allowable sampling rate
(default to 4000)
hw.snd.feeder_rate_ratemax - maximum allowable sampling rate
(default to 1102500)
hw.snd.feeder_rate_buffersize - conversion buffer size
(default to 8192)
hw.snd.feeder_rate_scaling - scaling / conversion method
(please refer to the source for explaination). Default to
previous implementation type.
3. feeder_fmt.c / sound.h
* New implementation, support for 24/32bit conversion, optimized,
and simplified. Few routines has been removed (8 to xlaw, 16 to
8). It just doesn't make sense.
4. channel.c
* Support for 24/32 AFMT
* Fix wrong xruns increment, causing incorrect underruns statistic
while using vchans.
5. vchan.c
* Support for 24/32 AFMT
* Proper speed / rate detection especially for fixed rate ac97.
User can override it using kernel hint:
hint.pcm.<unit>.vchanrate="xxxx".
Notes / Issues:
* Virtual Channels (vchans)
Enabling vchans can really, really help to solve overrun
issues. This is quite understandable, because it operates
entirely within its own buffering system without relying on
hardware interrupt / state. Even if you don't need vchan,
just enable single channel can help much. Few soundcards
(notably via8233x, sblive, possibly others) have their own
hardware multi channel, and this is unfortunately beyond
vchan reachability.
* The arrival of 24/32 also come with a price. Applications
that can do 24/32bit playback need to be recompiled (notably
mplayer). Use (recompiled) mplayer to experiment / test /
debug this various format using -af format=fmt. Note that
24bit seeking in mplayer is a little bit broken, sometimes
can cause silence or loud static noise. Pausing / seeking
few times can solve this problem.
You don't have to rebuild world entirely for this. Simply
copy /usr/src/sys/sys/soundcard.h to
/usr/include/sys/soundcard.h would suffice. Few drivers also
need recompilation, and this can be done via
/usr/src/sys/modules/sound/.
Support for 24bit hardware playback is beyond the scope of
this changes. That would require spessific hardware driver
changes.
* Don't expect playing 9999999999hz is a wise decision. Be
reasonable. The new feeder_rate implemention provide
flexibility, not insanity. You can easily chew up your CPU
with this kind of mind instability. Please use proper
mosquito repellent device for this obvious cracked brain
attempt. As for testing purposes, you can use (again)
mplayer to generate / play with different sampling rate. Use
something like "mplayer -af resample=192000:0:0 <files>".
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
1) 32bit data, packed within 32bit (4bytes) boundary.
2) 24bit data, packed within 32bit (4bytes) boundary where the data
is stored in the 24 most significant bits and least significant 8
bits are not used and should be set to 0.
While this might hold true in few cases, lots of applications (notably
mplayer, sweep) really deal / produce 24bit as what they should meant
to be: 24bit data / 3bytes per sample.
To handle this "true" 24bit pcm format add AFMT_x24_xE, so the in-kernel
conversion space did not confuse itself with 32bit variant.
You need to rebuild mplayer after installing this change (this header and
the upcomming kernel changes), if you want to use this new feature.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
This mostly to help CT4730, but apparently it does help other
cards too (especially via8233x). This probably need further test
and confirmation from other people with ac97 cards other than via
/ es137x.
* Aggresive dac power wake up call, again, to help CT4730 (and
probably others).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
- Don't mark MPSAFE (yet).
- DSP_CMD_DMAEXIT_8 doesn't work on old cards, use sb_reset_dsp() instead.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
* Add kernel hint option to disable DXS channels entirely. Report
from several skype users / Pav Lucistnik indicate that disabling
DXS may fix lots of pop / crackling noise. To disable DXS add
hint.pcm.<unit>.via_dxs_disabled="1" to /boot/device.hints.
Further investigation of the issues regarding DXS showed, that
the problem is in another (more generic) place, but until the
right fix is tested/reviewed this may help a little bit.
Added sysctl's to aid testing/debugging:
hint.pcm.<unit>.via_dxs_disabled=X - Disable / Enable DXS channels entirely
hint.pcm.<unit>.via_dxs_channels=X - Limit DXS channels up to X
hint.pcm.<unit>.via_sgd_channels=X - Limit SGD channels up to X
hint.pcm.<unit>.via_dxs_src=X - Enable / Disable DXS sample rate
converter.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
especially for CT4730 / EV1938 chip, causing misconfigured mixer
(David Xu), crippled after power cycle (Kevin Oberman). Fixed.
* Incorporate locking/spdif patches from Jon Noack / matk. Not all
es137x can really do spdif, clean it up a bit to only let few capable
chip. This adds a "hw.snd.pcm<unit>.spdif_enabled" sysctl until
a more generic way of handling this from userland (by an ordinary
user) is designed/implemented.
* Convert all bus_space_(read|write) to use es_rd/es_wr, simmilar
with other drivers.
* Add tunable hw.snd.pcm<unit>.latency_timer sysctl to toggle pci
latency timer value on the fly. Much noise / pop / crackling
issues can be solved by increasing its value. Other people have
pointed out to use pciconf instead, but this is just an added
value specific for CT4730/EV1938.
* Remove es137x specific debug sysctl/code.
Several PRs can now be closed.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Submitted by: Jon Noack <noackjr@alumni.rice.edu> (implicit)
Submitted by: matk (implicit)
PR: 59349, 68594, 73498
Tested by: multimedia@
kenv environment in kern_environment.c switches to dynamic kenv. The prior
call sets the static variable hintp to the static hints in subr_hints.c
(hintmode==0).
However, changes to the environment are not detected by the resource_xxx
lookups after the change to dynamic kernel environment, so the lookup
routines only report the old stuff of hintmode==0, even after the change to
the dynamic kenv. This causes kenv users to see a different environment than
the kernel routines.
This is a problem in the mixer.c code that looks up initial mixer volume
settings from the hints: If the hints are dynamic and not from the
device.hints file, mixer.c doesn't see them, but kenv does.
The patch from the PR (modified to comply to the style of the function)
solves this.
PR: 83686
Submitted by: Harry Coin <harrycoin@qconline.com>
This has no security implications since only root is allowed to use
kenv(1) (and corrupt the kernel memory after adding too much variables
previous to this commit).
This is based upon the PR [1] mentioned below, but extended to check both
bounds (in case of an overflow of the counting variable) and to comply
to the style of the function. An overflow of the counting variable
shouldn't happen after adding the check for the upper bound, but better
safe than sorry (in case some other function in the kernel overwrites
random memory).
An interested soul may want to add a printf to notify root in case the
bounds are hit.
Also allocate KENV_SIZE+1 entries (the array is NULL-terminated), since
the comment for KENV_SIZE says it's the maximum number of environment
strings. [2]
PR: 83687 [1]
Submitted by: Harry Coin <harrycoin@qconline.com> [1]
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> [2]
in the resource error in ep_alloc case. This results in a panic.
Zero resources to make it safe to call twice pending resolution of
layering questions.
MFC After: 3 days
mlx devices. This fixes an issue where mlx device drives fail to be
detected at system boot.
This is a RELENG_6 candidate.
Submitted by: oliver
PR: kern/84163