from an mbuf into the fxp_encap() function, as done in other drivers.
- Don't waste time calling bus_dmamap_load_mbuf() if we know the mbuf
chain is too long to fit in a TX descriptor, call m_defrag() first.
- Convert fxp(4) to use bus_dmamap_load_mbuf_sg().
initializing the sysctl mibs data before actually using them.
The original patchset (which is the actual version that is running
on my testboxes) have checked whether all of these sysctls and
refuses to do background fsck if we don't have them. Kirk has
pointed out that refusing running fsck on old kernels is pointless,
as old kernels will recompute the summary at mount time, so I
have removed these checks.
Unfortunatelly, as the checks will initialize the mib values of
those sysctl's, and which are vital for the runtime summary
adjustment to work, we can not simply remove the check, which
will lead to problem when running background fsck over a dirty
volume. Add these checks in a different way: give a warning rather
than refusing to work, and complain if the functionality is not
available when adjustments are necessary.
Noticed by: A power failure at my lab
Pointy hat: me
MFC After: 3 days
for the duration of the send() call. Such approach may be less than ideal
in threading environment, when several threads share the same socket and it
might happen that several of them are calling linux_send() at the same time
with and without SO_NOSIGPIPE set.
However, such race condition is very unlikely in practice, therefore this
change provides practical improvement compared to the previous behaviour.
PR: kern/76426
Submitted by: Steven Hartland <killing@multiplay.co.uk>
MFC after: 3 days
an invalid exception and return an NaN.
- If a long double has 113 bits of precision, implement fma in terms
of simple long double arithmetic instead of complicated double arithmetic.
- If a long double is the same as a double, alias fma as fmal.
identical to scalbnf, which is now aliased as ldexpf. Note that the
old implementations made the mistake of setting errno and were the
only libm routines to do so.
- Add nexttoward{,f,l} and nextafterl. On all platforms,
nexttowardl is an alias for nextafterl.
- Add fmal.
- Add man pages for new routines: fmal, nextafterl,
nexttoward{,f,l}, scalb{,l}nl.
Note that on platforms where long double is the same as double, we
generally just alias the double versions of the routines, since doing
so avoids extra work on the source code level and redundant code in
the binary. In particular:
ldbl53 ldbl64/113
fmal s_fma.c s_fmal.c
ldexpl s_scalbn.c s_scalbnl.c
nextafterl s_nextafter.c s_nextafterl.c
nexttoward s_nextafter.c s_nexttoward.c
nexttowardf s_nexttowardf.c s_nexttowardf.c
nexttowardl s_nextafter.c s_nextafterl.c
scalbnl s_scalbn.c s_scalbnl.c
sparc64's 128-bit long doubles.
- Define FP_FAST_FMAL for ia64.
- Prototypes for fmal, frexpl, ldexpl, nextafterl, nexttoward{,f,l},
scalblnl, and scalbnl.
- In scalbln and scalblnf, check the bounds of the second argument.
This is probably unnecessary, but strictly speaking, we should
report an error if someone tries to compute scalbln(x, INT_MAX + 1ll).
nexttowardl. These are not needed on machines where long doubles
look like IEEE-754 doubles, so the implementation only supports
the usual long double formats with 15-bit exponents.
Anything bizarre, such as machines where floating-point and integer
data have different endianness, will cause problems. This is the case
with big endian ia64 according to libc/ia64/_fpmath.h. Please contact
me if you managed to get a machine running this way.
that are intended to raise underflow and inexact exceptions.
- On systems where long double is the same as double, nextafter
should be aliased as nexttoward, nexttowardl, and nextafterl.
bit in a long double. For architectures that don't have such a bit,
LDBL_NBIT is 0. This makes it possible to say `mantissa & ~LDBL_NBIT'
in places that previously used an #ifdef to select the right expression.
The optimizer should dispense with the extra arithmetic when LDBL_NBIT
is 0 anyway.
- Add an XXX comment for the big endian case.
bit in a long double. For architectures that don't have such a bit,
LDBL_NBIT is 0. This makes it possible to say `mantissa & ~LDBL_NBIT'
in places that previously used an #ifdef to select the right expression.
The optimizer should dispense with the extra arithmetic when LDBL_NBIT
is 0.
at some point result in a status event being triggered (it should
be a link down event: the Microsoft driver design guide says you
should generate one when the NIC is initialized). Some drivers
generate the event during MiniportInitialize(), such that by the
time MiniportInitialize() completes, the NIC is ready to go. But
some drivers, in particular the ones for Atheros wireless NICs,
don't generate the event until after a device interrupt occurs
at some point after MiniportInitialize() has completed.
The gotcha is that you have to wait until the link status event
occurs one way or the other before you try to fiddle with any
settings (ssid, channel, etc...). For the drivers that set the
event sycnhronously this isn't a problem, but for the others
we have to pause after calling ndis_init_nic() and wait for the event
to arrive before continuing. Failing to wait can cause big trouble:
on my SMP system, calling ndis_setstate_80211() after ndis_init_nic()
completes, but _before_ the link event arrives, will lock up or
reset the system.
What we do now is check to see if a link event arrived while
ndis_init_nic() was running, and if it didn't we msleep() until
it does.
Along the way, I discovered a few other problems:
- Defered procedure calls run at PASSIVE_LEVEL, not DISPATCH_LEVEL.
ntoskrnl_run_dpc() has been fixed accordingly. (I read the documentation
wrong.)
- Similarly, the NDIS interrupt handler, which is essentially a
DPC, also doesn't need to run at DISPATCH_LEVEL. ndis_intrtask()
has been fixed accordingly.
- MiniportQueryInformation() and MiniportSetInformation() run at
DISPATCH_LEVEL, and each request must complete before another
can be submitted. ndis_get_info() and ndis_set_info() have been
fixed accordingly.
- Turned the sleep lock that guards the NDIS thread job list into
a spin lock. We never do anything with this lock held except manage
the job list (no other locks are held), so it's safe to do this,
and it's possible that ndis_sched() and ndis_unsched() can be
called from DISPATCH_LEVEL, so using a sleep lock here is
semantically incorrect. Also updated subr_witness.c to add the
lock to the order list.
- "options" is followed by the characters \040\011, not \011\011.
Correct both my own sins and those of others.
- Comment blocks start and end with an empty line ^#$.
- Remove non-standard comments added in my last commit.
Requested by: njl
Correctness confirmed by: bde
since there are often significant holes in the memory map due to the
kernel, loader and OFW data structures not being included: Maxmem is
the highest available, so can be misleading.
them all, otherwise the driver will be useless and will only confuse user
as manual page says nothing about the need to enable one of those frame
types explicitly in the kernel config.
PR: kern/47152
Submitted by: Andriy Gapon <avg@icyb.net.ua>
MFC after: 3 days
as we can't rely on a trap happening, as it is done normally.
While I'm there, uncomment the call to cpu_dcache_wbinv_range() in
pmap_kenter_internal, as we don't call cpu_dcache_wbinv_all() there anymore.
