Commit Graph

3132 Commits

Author SHA1 Message Date
Kevin Lo
9df3ee0758 Use 'val' instead of 'val & 0xff' since the last argument of run_bbp_write()
is uint8_t.

Spotted by:	yongari
2013-12-18 08:53:40 +00:00
Kevin Lo
fd8fcee579 Fix style: add tab after #define. 2013-12-18 08:39:12 +00:00
Kevin Lo
c48c6bf8fc Fix typo in comment. 2013-12-18 07:47:50 +00:00
Kevin Lo
010b13fa94 Add support to IQ calibration. 2013-12-18 07:34:57 +00:00
Hans Petter Selasky
6f0468df7a Fix regression issue after r259248:
Some Intel XHCI controlles timeout processing so-called "TRBs" when
the final LINK TRB of a so-called "TD" has the CHAIN-BIT set.

MFC after:	1 week
Tested by:	glebius @
2013-12-16 10:50:13 +00:00
Hans Petter Selasky
27ce2fd67c Set chain bit correctly. This will fix some problems sending and
receiving Zero Length Packets, ZLPs. See comment in code for more
information.

MFC after:	1 week
Reported by:	Kohji Okuno <okuno.kohji@jp.panasonic.com>
2013-12-12 08:34:51 +00:00
Hans Petter Selasky
e892b3fe36 USB method structures for USB controllers and USB pipes should be
constant and does not need to be modified. This also saves a small
amount of RAM.
2013-12-11 13:20:32 +00:00
Hans Petter Selasky
468f354b0e Fix typos.
Found by:	remko
2013-12-08 06:52:22 +00:00
Hans Petter Selasky
daab849b2c Fix compilation when the "USB_DEBUG" option is set. 2013-12-06 22:13:51 +00:00
Kevin Lo
242dbae34c Add support for the MediaTek/Ralink RT5572 chipset.
Committed over the TP-LINK TL-WDN3200 (RT5572) on amd64 with WPA.

While here, add my copyright.
2013-12-06 15:26:39 +00:00
Kevin Lo
e0790ad8eb Replace the magic numbers with something more readable. 2013-12-06 15:17:28 +00:00
Kevin Lo
b8161ff3c1 Cosmetic changes. 2013-12-06 15:15:58 +00:00
Kevin Lo
1d66c7a9cf Remove daft KASSERT. 2013-12-06 15:14:18 +00:00
Hans Petter Selasky
563ab08139 Improve the XHCI command timeout recovery handling code.
MFC after:	1 week
2013-12-06 08:42:41 +00:00
Hans Petter Selasky
bce421e9f7 Fix external compiler warning about write-only assigned variable. 2013-12-05 07:18:06 +00:00
Hans Petter Selasky
0aff597a1f Fix what looks like a typo after r258732. 2013-12-04 12:30:51 +00:00
Hans Petter Selasky
8cfe54400e Fix external compiler warning(s). Avoid pointer dereferencing. 2013-12-04 12:07:46 +00:00
Kevin Lo
405886883d The RUN_MAX_TXSZ constat is defined as Tx desc + Tx wireless info + MCLBYTES +
max padding.  We were lucky in that run(4) working fine since both
rt2860_rxwi and rt2860_txwi structure sizes are the same.
2013-12-02 09:07:43 +00:00
Eitan Adler
7a22215c53 Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit.  Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with:	-arch, rdivacky
Reviewed by:	cperciva
2013-11-30 22:17:27 +00:00
Kevin Lo
5b7514646c Change run_rt2870_rf_write() prototype (no functional change) 2013-11-29 07:08:17 +00:00
Kevin Lo
5f7e329cec On the RT2870, rf registers are now 64-bit, not 32-bit after r257955.
Committed over a Buffalo WLI-UC-AG300N (RT2870).
2013-11-29 06:10:44 +00:00
Hans Petter Selasky
361f264ba0 Style changes. 2013-11-26 11:11:24 +00:00
Hans Petter Selasky
beb13f0407 Add missing static keyword.
MFC after:	2 weeks
2013-11-26 10:53:12 +00:00
Hans Petter Selasky
5c0f828a07 Comply to the XHCI specification. Certain input context fields should
always be zero.

MFC after:	1 week
2013-11-25 10:58:02 +00:00
Don Lewis
3ca52b0d34 Add alternate ID for Novatel MiFi 2200 CDMA, which is used by my
Virgin Mobile branded device.  It needs the U3GINIT_SCSIEJECT quirk.

Reviewed by:	hselasky
MFC after:	1 month
2013-11-20 02:16:47 +00:00
Mark Johnston
da089c1410 Import the axge(4) driver for the ASIX AX88178A and AX88179 USB Ethernet
adapters. Both devices support Gigabit Ethernet and USB 2.0, and the AX88179
supports USB 3.0. The driver was written by kevlo@ and lwhsu@, with a few
bug fixes from me.

MFC after:	2 months
2013-11-19 00:37:53 +00:00
Alexander Motin
eda36fb4f5 Add some more IDs for Intel ATA, AHCI and USB controllers. 2013-11-15 10:28:59 +00:00
Kevin Lo
0f3728be20 Remove a couple of unused macros. 2013-11-13 05:22:39 +00:00
Kevin Lo
28dfd8415b - Use bit twiddling macro to set IEEE80211_MODE_11A
- On the RT3572 chipset, there's no need to configure BBP register 86
2013-11-13 05:21:41 +00:00
Mark Johnston
aae2e36cd5 Add IDs for the ASIX 88179 and 88178A USB to GigE adapters. 2013-11-12 06:14:12 +00:00
Kevin Lo
bf124fcf1e Use the real product name for Edimax rsu(4) id. 2013-11-12 02:34:48 +00:00
Kevin Lo
67e73b2b2d Remove r257748 by accident. 2013-11-11 10:00:19 +00:00
Kevin Lo
64891211ca Add support for the MediaTek/Ralink RT5370/RT5372 chipset.
Tested with the TP-Link TL-WN727N (RT5370) and the D-Link DWA-140 (RT5372)
on i386/amd64/arm with WPA.
2013-11-11 09:47:33 +00:00
Hans Petter Selasky
415fd8a3dc Implement a working write region function to speed up loading of the
firmware. You can test this change by switching the "#if 1" statement
right above in the patched code to "#if 0" !

MFC after:	1 week
2013-11-06 15:32:37 +00:00
Hans Petter Selasky
bb2f69e83f Check for "ieee80211_vap_setup()" failure in all USB WLAN drivers.
MFC after:	1 week
2013-11-06 12:57:01 +00:00
Kevin Lo
ae7d66f220 Reading the RT2860_ASIC_VER_ID register is not needed and returns
completely bogus value.
2013-11-06 02:49:16 +00:00
Hans Petter Selasky
2764a2784f Protect the "ratectl_ch" callout in the "run" driver by the "run"
softc's "sc->sc_mtx" mutex. Currently the callout was marked
multi-processor safe, which is fine, but it is better to
start/stop/reset callouts while holding the "run" drivers own
mutex. While at it add a missing "ULL" at end of the 64-bit unsigned
integer constant.

MFC after:	1 week
2013-11-05 18:27:25 +00:00
Hans Petter Selasky
7815365774 Add description of two EHCI PCI IDs.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
2013-11-03 21:33:42 +00:00
Alfred Perlstein
50903998f0 Add device ID for 'Sanoxy 802.11N' usb 2013-11-02 11:37:16 +00:00
Adrian Chadd
c48efaecf6 Allow the Arduino Leonardo to work by supporting CDC=0 devices.
CDC=0 simply means "no command codes", CDC=1 means "AT command codes."
There's no driver change required!  It's purely to tell the application
layer whether to speak AT commands or not.  Things are all still serial.

PR:		usb/183505
Reviewed by:	hps
MFC after:	1 week
2013-10-31 13:54:51 +00:00
Hans Petter Selasky
645826bef4 Fix a potential memory leak.
MFC after:	1 week
2013-10-31 11:03:36 +00:00
Hans Petter Selasky
35a2489852 Fix some types. Compilation for external target complains that "u_int"
is not idential to "uint32_t" when defining set channel prototype
functions. The WLAN channel range should be from 0 to 65535
inclusivly, and u_int should be fine for this purpose.
2013-10-31 09:20:30 +00:00
Kevin Lo
30dfa97944 Add RT2860_BCN_OFFSET1 and RT2860_MAX_LEN_CFG register initialization to
match with the vendor driver.  While here, remove unused RT2860_DEF_MAC
definition.
2013-10-31 02:03:30 +00:00
Kevin Lo
1365315d41 Initialize BBP68 to improve rx sensitivity. 2013-10-31 02:02:14 +00:00
Kevin Lo
c513ecfd12 Enable DC filter in RT3071 Version E. 2013-10-31 02:00:58 +00:00
Ian Lepore
f26c810514 Rework the imx ehci driver so that it's four separate ehci units rather
than one unit with four busses attached to it.  This allows us to use
existing fdt data which describes separate devices with separate resources.
It also allows any combination of the units to be en/disabled in the
board dts files.

Adjust our dts code to match what's used by linux and u-boot now that
we're structured to do so.

Document lots of interesting stuff learned whiling doing this with a big
comment block in the driver, so I don't have to re-learn it for the next
round of changes.
2013-10-30 18:26:18 +00:00
Ian Lepore
22aa1751eb Add a vendor entry for Freescale Semiconductor. 2013-10-30 16:34:26 +00:00
Nathan Whitehorn
123055f01f Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks
2013-10-30 14:04:47 +00:00
Gleb Smirnoff
c3322cb91c Include necessary headers that now are available due to pollution
via if_var.h.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-28 07:29:16 +00:00
Hans Petter Selasky
d6f4a9f9f6 Fix a deadlock when trying to power off a USB device. The deadlock
happens because the code in question is trying to modify the parent
USB port registers outside the USB explore thread.

MFC after:	3 days
2013-10-27 10:09:53 +00:00