testing it to know whether we should enable the 82503 serial mode...
Move code to the right location and disallow the use of the 82503
serial mode if the sc->revision field is 0 again. This makes fxp(4)
work correctly with ATMEL 350 93C46 cards (3 port 82559 based with a
82555 PHY), as well as with the older ATMEL 220 93C46 (same flavour)
and with the even older 10Mbps-only 82557 cards with the 82503 serial
interface.
Tested by: Andre Albsmeier <andrer@albsmeier.net>, krion
MFC after: 2 weeks
SMP systems. It appears all drivers except ichss should attach to each
CPU and that settings should be performed on each CPU. Add comments about
this. Also, add a guard for p4tcc's identify method being called more than
once.
debug.cpufreq.lowest tunable and sysctl. Some systems seem to have problems
with the lowest frequencies so setting this prevents them from being
available or used.
introducing the disk formats for _RuneLocale and friends.
The disk formats do not have (useless) pointers and have 32-bit
quantities instead of rune_t and long. (htonl(3) only works
with 32-bit quantities, so there's no loss).
Bootstrap mklocale(1) when necessary. (Bootstrapping from 4.x
would be trivial (verified), but we no longer provide pre-5.3
source upgrades and this is the first commit to actually break
it.)
ARM_TP_ADDRESS, where the tp will be stored. On CPUs that support it, a cache
line will be allocated and locked for this address, so that it will never go
to RAM. On CPUs that does not, a page is allocated for it (it will be a bit
slower, and is wrong for SMP, but should be fine for UP).
The tp is still stored in the mdthread struct, and at each context switch,
ARM_TP_ADDRESS gets updated.
Suggested by: davidxu
uart(4) to support the Zilog 8530 SCCs which hang off of a FireHose
bus on Sun E4000/E5000 class machines.
Beside the fact that a puc_fhc.c would just be a copy of puc_sbus.c
with s,sbus,fhc,g the reason why the declaration for fhc(4) was
sticked into puc_sbus.c is that both of these front-ends for puc(4)
will go away once there is a scc(4).
Discussed with: marcel
Tested by: hrs, kris
MFC after: 3 days
both a scc(4) is under way and fhc(4) will be change to use INOs this
shouldn't stay in HEAD for too long but we need a MFC-able solution
for FreeBSD 5.4.
Discussed with: marcel
Tested by: hrs, kris
MFC after: 3 days
that describe a buffer of variable size). The problem is, allocating
MDLs off the heap is slow, and it can happen that drivers will allocate
lots and lots of lots of MDLs as they run.
As a compromise, we now do the following: we pre-allocate a zone for
MDLs big enough to describe any buffer with 16 or less pages. If
IoAllocateMdl() needs a MDL for a buffer with 16 or less pages, we'll
allocate it from the zone. Otherwise, we allocate it from the heap.
MDLs allocate from the zone have a flag set in their mdl_flags field.
When the MDL is released, IoMdlFree() will uma_zfree() the MDL if
it has the MDL_ZONE_ALLOCED flag set, otherwise it will release it
to the heap.
The assumption is that 16 pages is a "big number" and we will rarely
need MDLs larger than that.
- Moved the ndis_buffer zone to subr_ntoskrnl.c from kern_ndis.c
and named it mdl_zone.
- Modified IoAllocateMdl() and IoFreeMdl() to use uma_zalloc() and
uma_zfree() if necessary.
- Made ndis_mtop() use IoAllocateMdl() instead of calling uma_zalloc()
directly.
Inspired by: discussion with Giridhar Pemmasani
clock time to uptime because wall clock time may go backwards.
This is a change in the API which will impact SNMP agents who are using
ifi_epoch to set RFC2233's ifCounterDiscontinuityTime. None are know to
exist today. This will not impact applications that are using the
<index, epoch> tuple to verify interface uniqueness except that it
eliminates a race which could lead to a false assumption of uniqueness.
Because this is a behavior change, bump __FreeBSD_version.
Discussed with: re (jhb, scottl)
MFC after: 3 days
Pointed out by: pkh (way back at EuroBSDCon)
Pointy hat: brooks
o change the mapping arrays to have a zero offset rather than base 1;
this eliminates lots of signo adjustments and brings the code
back inline with the original netbsd code
o purge use of SVR4_SIGTBLZ; SVR4_NSIG is the only definition for
how big a mapping array is
o change the mapping loops to explicitly ignore signal 0
o purge some bogus code from bsd_to_svr4_sigset
o adjust svr4_sysentvec to deal with the mapping table change
Enticed into fixing by: Coverity Prevent analysis tool
Glanced at by: marcel, jhb
owned by a process when it forks, and creates a matching set of references
for the child process, as prescribed by POSIX.
In order to avoid races with other threads in the parent process during
fork(), it is necessary to allocate a temporary reference list while
holding the sem_lock, then transfer those references to the new process
once the sem_lock is released. The implementation is inefficient but
appears functional; in order to improve the efficiency, it will be
necessary to modify the existing structures and logic, which generally
rely on O(n) operations over the global set of semaphores.
PAGE_SIZE.
Unlike originator of the PR suggests retain MAXSHELLCMDLEN definition
(he has been proposing to replace it with PAGE_SIZE everywhere), not only
this reduced the diff significantly, but prevents code obfuscation and also
allows to increase/decrease this parameter easily if needed.
PR: kern/64196
Submitted by: Magnus Bäckström <b@etek.chalmers.se>
doesn't change functionality, but makes code more logical.
Obtained from: DrafonFlyBSD
o Use VOP_GETATTR() to obtain actual size of file and parse no more than that.
Previously, we parsed MAXSHELLCMDLEN characters regardless of the actual file
size. This makes the following working:
$ printf '#!/bin/echo' > /tmp/test.sh
$ chmod 755 /tmp/test.sh
$ /tmp/test.sh
Previously, attempts to execve() that shell script has been failing with bogus
ENAMETOOLONG.
PR: kern/64196
Submitted by: Magnus B.ckstr.m <b@etek.chalmers.se>
- Simplify CARP_LOG() and making it working (we don't have addlog in FreeBSD).
- Introduce CARP_DEBUG() which logs with LOG_DEBUG severity when
net.inet.carp.log > 1
- Use CARP_DEBUG to log state changes of carp interfaces.
After CARP_LOG() cleanup it appeared that carp_input_c() does not need sc
argument. Remove it.
Sponsored by: Rambler
script. Otherwise it's possible to panic kernel by constructing a shell
script with first line not ending in '\n'.
Also, treat '\0' as line terminating character, which may me useful in
some situations.
Submitted by: gad
- store assigned PCI addresses at cninit time for later mmap range
check
- implement set_border to scrub X remnants when switching back to VTYs
- implement mmap, only allowing addresses within the range of the
console adapter.
for a given device in some circumstances, so move the PDO creation
to the attach routine so we don't end up creating two PDOs.
Also, when we skip the call to ndis_convert_res() in if_ndis.c:ndis_attach(),
initialize sc->ndis_block->nmb_rlist to NULL. We don't explicitly zero
the miniport block, so this will make sure ndis_unload_driver() does
the right thing.
when we create a PDO, the driver_object associated with it is that
of the parent driver, not the driver we're trying to attach. For
example, if we attach a PCI device, the PDO we pass to the NdisAddDevice()
function should contain a pointer to fake_pci_driver, not to the NDIS
driver itself. For PCI or PCMCIA devices this doesn't matter because
the child never needs to talk to the parent bus driver, but for USB,
the child needs to be able to send IRPs to the parent USB bus driver, and
for that to work the parent USB bus driver has to be hung off the PDO.
This involves modifying windrv_lookup() so that we can search for
bus drivers by name, if necessary. Our fake bus drivers attach themselves
as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them
using those names.
The individual attachment stubs now create and attach PDOs to the
parent bus drivers instead of hanging them off the NDIS driver's
object, and in if_ndis.c, we now search for the correct driver
object depending on the bus type, and use that to find the correct PDO.
With this fix, I can get my sample USB ethernet driver to deliver
an IRP to my fake parent USB bus driver's dispatch routines.
- Add stub modules for USB support: subr_usbd.c, usbd_var.h and
if_ndis_usb.c. The subr_usbd.c module is hooked up the build
but currently doesn't do very much. It provides the stub USB
parent driver object and a dispatch routine for
IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at
the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub
compiles, but is not hooked up to the build yet. I'm putting
these here so I can keep them under source code control as I
flesh them out.
right for certain MAP_FIXED mappings on ia64 but it will work fine for all
other mappings and works fine on amd64.
Requested by: ps, Christian Zander
MFC after: 1 week
- In kern_ndis.c:ndis_unload_driver(), test that ndis_block->nmb_rlist
is not NULL before trying to free() it.
- In subr_pe.c:pe_get_import_descriptor(), do a case-insensitive
match on the import module name. Most drivers I have encountered
link against "ntoskrnl.exe" but the ASIX USB ethernet driver I'm
testing with wants "NTOSKRNL.EXE."
- In subr_ntoskrnl.c:IoAllocateIrp(), return a pointer to the IRP
instead of NULL. (Stub code leftover.)
- Also in subr_ntoskrnl.c, add ExAllocatePoolWithTag() and ExFreePool()
to the function table list so they'll get exported to drivers properly.
panic at kmem_alloc() via malloc(9).
PR: kern/77748
Submitted by: Wojciech A. Koszek
OK'ed by: brooks
Security: local DoS, a sample code in the PR.
MFC after: 3 days
mastering on all other interfaces:
- call carp_carpdev_state() on initialize instead of just setting to INIT
- in carp_carpdev_state() check that interface is UP, instead of checking
that it is not DOWN, because a rebooted machine may have interface in
UNKNOWN state.
Sponsored by: Rambler
Obtained from: OpenBSD (partially)
when trim'ing space off the back of a chain; this is indirect
solution to a potential null ptr deref
Noticed by: Coverity Prevent analysis tool (null ptr deref)
Reviewed by: dg, rwatson
vn_extattr_rm. This is meant to catch conditions where IO_NODELOCKED
has been specified without the vnode being locked.
Discussed with: rwatson
MFC after: 1 week
object on to the zone allocator. It should be noted that uma_zalloc(9)
uses bzero to zero out the object so there probably wont be any
real performance benefit. If UMA grows the ability to supply
zeroed zones more efficiently in the future, we will not have to
modify all the existing consumers.
Discussed with: rwatson,julian
MFC after: 1 week
and a machine-independent though inefficient InterlockedExchange().
In Windows, InterlockedExchange() appears to be implemented in header
files via inline assembly. I would prefer using an atomic.h macro for
this, but there doesn't seem to be one that just does a plain old
atomic exchange (as opposed to compare and exchange). Also implement
IoSetCancelRoutine(), which is just a macro that uses InterlockedExchange().
Fill in IoBuildSynchronousFsdRequest(), IoBuildAsynchronousFsdRequest()
and IoBuildDeviceIoControlRequest() so that they do something useful,
and add a bunch of #defines to ntoskrnl_var.h to help make these work.
These may require some tweaks later.
a bugfix of clearing the On-Demand flag when going back to 100%. It
has been tested and works on an IBM R32. Note original work done by
Ted Unangst and sobomax@.
the previous one failed and there are more than one plex in the volume.
This could have led to a flood of error messages on the console and
probably a deadlock in certain situations.
has been set. Assert that this is the case so that we catch filesystems
who are using naked VOP_LOCKs in illegal cases.
Sponsored by: Isilon Systems, Inc.
considered to be as good as an exclusive lock, although there is still a
possibility of someone acquiring a VOP LOCK while xlock is held.
Sponsored by: Isilon Systems, Inc.
chipset. Add support for this card. Office Max has them on sale and
I was surprised that we didn't have it in our supported list when I
plugged it in...
IRQ 0 and not an ExtINT pin. The MADT enumerators ignore the PC-AT flag
and ignore overrides that map IRQ 0 to pin 2 when this quirk is present.
- Add a block comment above the quirks to document each quirk so that we
can use more verbose descriptions quirks.
MFC after: 2 weeks
ACPI MADT only does if the PC-AT flag is set), then don't assume that pin 0
on the first I/O APIC is an ExtINT pin. Instead, assume that it is ISA
IRQ 0.
with the kernel compile time option:
options IPFIREWALL_FORWARD_EXTENDED
This option has to be specified in addition to IPFIRWALL_FORWARD.
With this option even packets targeted for an IP address local
to the host can be redirected. All restrictions to ensure proper
behaviour for locally generated packets are turned off. Firewall
rules have to be carefully crafted to make sure that things like
PMTU discovery do not break.
Document the two kernel options.
PR: kern/71910
PR: kern/73129
MFC after: 1 week
so that parent interface is not left in promiscous mode after carp
interface is destroyed.
This is not perfect, since promisc counter is added when carp
interface is assigned an IP address. However, when address is removed
parent interface is still in promiscuous mode. Only removal of
carp interface removes promisc from parent. Same way in OpenBSD.
Sponsored by: Rambler
List devfs_dirents rather than vnodes off their shared struct cdev, this
saves a pointer field in the vnode at the expense of a field in the
devfs_dirent. There are often 100 times more vnodes so this is bargain.
In addition it makes it harder for people to try to do stypid things like
"finding the vnode from cdev".
Since DEVFS handles all VCHR nodes now, we can do the vnode related
cleanup in devfs_reclaim() instead of in dev_rel() and vgonel().
Similarly, we can do the struct cdev related cleanup in dev_rel()
instead of devfs_reclaim().
rename idestroy_dev() to destroy_devl() for consistency.
Add LIST_ENTRY de_alias to struct devfs_dirent.
Remove v_specnext from struct vnode.
Change si_hlist to si_alist in struct cdev.
String new devfs vnodes' devfs_dirent on si_alist when
we create them and take them off in devfs_reclaim().
Fix devfs_revoke() accordingly. Also don't clear fields
devfs_reclaim() will clear when called from vgone();
Let devfs_reclaim() call dev_rel() instead of vgonel().
Move the usecount tracking from dev_rel() to devfs_reclaim(),
and let dev_rel() take a struct cdev argument instead of vnode.
Destroy SI_CHEAPCLONE devices in dev_rel() (instead of
devfs_reclaim()) when they are no longer used. (This
should maybe happen in devfs_close() instead.)
that NFS ever started using it. Long time ago I added the necessary
vhold()/vdrop() calls to replace it, but forgot to remove the v_id code.
Do it now.
It is _never_ OK to find a vnode from a struct cdev because you have
no way of telling if you get the right one. You might be in jail or
chroot for instance.
The fundamental problem is that we get only the lower 8 bits of the
minor device number so there is no guarantee that we can actually
find the disk device in question at all.
This was probably a bigger issue pre-GEOM where the upper bits
signaled which slice were in use.
The secondary problem is how we get from (partial) dev_t to vnode.
The correct implementation will involve traversing the mount list
looking for a perfect match or a possible match (for truncated
minor).
hosts to share an IP address, providing high availability and load
balancing.
Original work on CARP done by Michael Shalayeff, with many
additions by Marco Pfatschbacher and Ryan McBride.
FreeBSD port done solely by Max Laier.
Patch by: mlaier
Obtained from: OpenBSD (mickey, mcbride)
address is not supplied, then jail IP is choosed and in_pcbbind() is called.
Since udp_output() does not save local addr after call to in_pcbconnect_setup(),
in_pcbbind() is called for each packet, and this is incorrect.
So, we shall treat jailed sockets specially in udp_output(), we will save
their local address.
This fixes a long standing bug with broken sendto() system call in jails.
PR: kern/26506
Reviewed by: rwatson
MFC after: 2 weeks
loopback interface. Nobody have explained me sense of this check.
It breaks connect() system call to a destination address which is
loopback routed (e.g. blackholed).
Reviewed by: silence on net@
MFC after: 2 weeks
modes, systems may take longer. If the status values don't match, try
matching just the lowest 8 bits if no bits above 8 are set in the desired
value. The IBM R32 has other bits set in the status register that are
irrelevant to the expected value.
