was due to non-aligned 64K transfers taking 17 pages. We currently
do not support >16 page transfers. The transfer is unfortunately truncated,
but since buffers are usually malloced, this is a problem only once in
a while. Savecore is a culprit, but tar/cpio usually aren't. This
is NOT the final fix (which is likely a bouncing scheme), but will at
least keep the system from crashing.
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
too late to be used in all cases. It should probably be created (early)
in bsd.kmod.mk for all LKMs.
Use cc instead of cpp | as for the same reasons as in the kernel makefile.
CFLAGS isn't split up as well as in the kernel makefile, but cc doesn't
pass compiler warning flags to cpp, so there is no need to split it.
Fixed profiling of system times. It was pre-4.4Lite and didn't support
statclocks. System times were too small by a factor of 8.
Handle deferred profiling ticks the 4.4Lite way: use addupc_task() instead
of addupc(). Call addupc_task() directly instead of using the ADDUPC()
macro.
Removed vestigial support for PROFTIMER.
switch.s:
Removed addupc().
resourcevar.h:
Removed ADDUPC() and declarations of addupc().
cpu.h:
Updated a comment. i386's never were tahoe's, and the deferred profiling
tick became (possibly) multiple ticks in 4.4Lite.
Obtained from: mostly from NetBSD
multiplication in addupc() overflowed for addresses >= 256K, assuming
the usual profil(2) scale parameter of 0x8000. addupc() will go away
soon.
Submitted by: John Polstra <jdp@polstra.com>
via an ioctl (MOUSE_ACTION).
Fixed a couple of bugs (destructive cursor, uncut, jitter).
Now applications can use the mouse via the MOUSE_MODE ioctl, its
possible to have a signal sent on mouseevents, makeing an event loop
in the application take over mouseevents.
Reviewed by: phk
Reject the addition of rules that will never match (for example,
1.2.3.4:255.255.255.0). User level utilities specify the policy by either
masking the IP address for the user (as ipfw(8) does) or rejecting the
entry with an error. In either case, the kernel should not modify chain
entries to make them work.
media in all cases.
Remove SCSI_2_MAX_DENSITY_CODE definition and rely on the device to tell
us if we attempt an invalid setting.
Closes PR 1245.
Submitted by: fredriks@mcs.com a few changes by me.
LKM'ness. ACTUALLY_LKM_NOT_KERNEL is supposed to be so ugly that it
only gets used until <machine/conf.h> goes away. bsd.kmod.mk should
define a better-named general macro for this. Some places use
PSEUDO_LKM. This is another bad name.
Makefile:
Added IPFIREWALL_VERBOSE_LIMIT option (commented out).
broadcast and multicast routes, otherwise they will be expired by
arptimeout after a few minutes, reverting to " (incomplete)". This makes
the work done by rev 1.27 stay around until the route itself is deleted.
This is mainly cosmetic for 'arp' and 'netstat -r'.
things tend to work better if you write the settings to the correct
register.. (*blush*). This subtle bug has been haunting me for ages, and
will solve a few problems that have been reported to me.
Also, take a shot at fixing the serial BREAK processing, what was there
before never really worked. (There is a PR on this I think)
Real support for a Textmode mousecursor, works by reprogramming the
charset. Together with this support for cut&paste in text mode.
To use it a userland daemon is needed (moused), which provides
the interface to the various mice protokols.
Bug fixes here and there, all known PR's closed by this update.
for ARP requests.
The NetBSD version of this patch (see NetBSD PR kern/2381) has this change
already. This should close our PR kern/1140 .
Although it's not quite what he submitted, I got the idea from him so
Submitted by: Jin Guojun <jin@george.lbl.gov>
/kernel: in_rtqtimo: adjusted rtq_reallyold to 1066
/kernel: in_rtqtimo: adjusted rtq_reallyold to 710
inside of #ifdef DIAGNOSTIC to avoid the support questions from folks
asking what this means.
gary went a little overboard on commenting out unused variables.
Variables needed for ISO, LLC and NETATALK
were only enabled for ISO & LLC.. so NETATALK bombed.
is only used by the icu support modules and by a few drivers that know
too much about the icu (most only use it to convert `n' to `IRQn'). isa.h
is only used by ioconf.c and by a few drivers that know too much about
isa addresses (a few have to, because config is deficient).
with multiple entries as follows:
start address, end address, resident pages in range, private pages
in range, RW/RO, COW or not, (vnode/device/swap/default).
compiler warnings which occur if you don't have 'options DEVFS' in
your kernel config file:
../../kern/kern_descrip.c: In function `fildesc_drvinit':
../../kern/kern_descrip.c:1103: warning: unused variable `fd'
../../kern/kern_descrip.c: At top level:
../../kern/kern_descrip.c:1095: warning: `devfs_token_stdin' defined but not use
d
../../kern/kern_descrip.c:1096: warning: `devfs_token_stdout' defined but not us
ed
../../kern/kern_descrip.c:1097: warning: `devfs_token_stderr' defined but not us
ed
../../kern/kern_descrip.c:1098: warning: `devfs_token_fildesc' defined but not u
sed
to match (pc98/random_machdep.c probably requires a similar change). This
is a problem area for the PC98 merge - all PC98 ifdefs in <machine/*.h> are
kludges to work around incorrect layering.
disklabel(8) to the kernel (dsopen()). Drivers should initialize the
hardware values (rpm, interleave, skews). Drivers currently don't do
this, but it usually doesn't matter since rotational position stuff is
normally disabled.
Original version by John Hay.
Simplified timestamp code by reading the time exactly when necessary.
This may slow down the interrupt handler with extra calls to microtime(),
but only in bad configurations - the input fifo should normally be
disabled if timestamps on input are being used, since otherwise the
timestamp won't be precisely associated with any particular input event.
The interrupt handler remains slowed down by one test and branch for
each input (and now DCD change) event - avoiding this is not practical
yet.
The simplifications also fixed:
- timestamps for input sometimes being clobbered by output and modem
status interrupts.
- valid timestamps not being available unless the port is configured with
vector siointrts. siointrts no longer exists.
- compiler warnings about siointr* in some configurations.
Simplified timestamp and probe code by depending on recent changes in
microtime() and DELAY() to preserve the interrupt enable flag.
enable flag instead of enable_intr() to restore it to its usual state.
getit() is only called from DELAY() so there is no point in optimising
its speed (this wasn't so clear when it was extern), and using
enable_intr() made it inconvenient to call DELAY() from probes that need
to run with interrupts disabled.
instead of sti to it restore to its usual state. pushfl/popfl is
actually faster in protected mode on Pentiums (4+3 cycles instead of 9),
and using sti made it extremely inconvenient to call microtime() from
fast interrupt handlers. pushfl/popfl is a couple of cycles slower than
sti on 486's and a couple more cycles slower on 386's, but the relative
cost of using it is not large since microtime() has to use slow i/o
instructions on the old cpus.
1) Make it much less likely to miss a wakeup in vm_page_free_wakeup
2) Create a new entry point into pmap: pmap_ts_referenced, eliminates
the need to scan the pv lists twice in many cases. Perhaps there
is alot more to do here to work on minimizing pv list manipulation
3) Minor improvements to vm_pageout including the use of pmap_ts_ref.
4) Major changes and code improvement to pmap. This code has had
several serious bugs in page table page manipulation. In order
to simplify the problem, and hopefully solve it for once and all,
page table pages are no longer "managed" with the pv list stuff.
Page table pages are only (mapped and held/wired) or
(free and unused) now. Page table pages are never inactive,
active or cached. These changes have probably fixed the
hold count problems, but if they haven't, then the code is
simpler anyway for future bugfixing.
5) The pmap code has been sorely in need of re-organization, and I
have taken a first (of probably many) steps. Please tell me
if you have any ideas.
1) Remove potential race conditions on waking up in vm_page_free_wakeup
by making sure that it is at splvm().
2) Fix another bug in vm_map_simplify_entry.
3) Be more complete about converting from default to swap pager
when an object grows to be large enough that there can be
a problem with data structure allocation under low memory
conditions.
4) Make some madvise code more efficient.
5) Added some comments.
. use new-style options
. introduce an option OD_AUTO_TURNOFF
. try to use the native geometry as reported by the drive instead of
a faked on -- MOs do have a ``classical'' geometry
. make the scsi_start_unit() actually working
. some cosmetic fixes
Submitted by: akiyama@kme.mei.co.jp (Shunsuke Akiyama)
exit and cleanup. the 'ps' command assumes that there are always 'nproc'
processes on the lists and will walk off the end without checking if not,
causing ddb to trap during the 'ps' command.
parameters to printf() using the "D" format. (Why this even worked on
my box during testing I don't know, but as soon as I powered it on/off
it quite working.)
using the existing files using the existing PCCARD support. Now that
this is in place I would like to fixup the PCCARD hooks and remove the
if_zp driver. At this point, we support everything we used to support
*AND MORE* with the PCCARD code.
Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp> (via the Nomad release)
[ This works on both my 3C589B and 3C589C ]
My 3C509B-COMBO works fine with the following patch. Switching between
UTP and BNC is quite easy. (Just type 'ifconfig ep0 link1 -link2' or 'ifconifg
ep0 link2 -link1'.)
[ I tested this with the additional PC-CARD patches and it works on both
connectors on my 3C589B and 3C589C ]
Reviewed by: nate
Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp>
to PF_ROUTE) from NRL's IPv6 distribution, heavily modified by me for
better source layout, formatting, and textual conventions. I am told
that this code is no longer under active development, but it's a useful
hack for those interested in doing work on network security, key management,
etc. This code has only been tested twice, so it should be considered
highly experimental.
Obtained from: ftp.ripe.net
Poul mentioned that he thought this was some kind of timing problem, and
that started me thinking. After a little poking around, I found that
nfs_timer() was completely disabled when NFS_NOSERVER was #defined.
But after looking at nfs_timer(), it seemed like it was something
required by both the client and server code, and disabling it outright
just didn't seem to make any sense. Parts of it relate only to the
NFS server side code, so I disabled those, but I re-enabled the rest
of the function and made sure that it would be called from nfs_init()
(in nfs_subs.c).
With nfs_timer() re-enabled, everything seems to work again. The only
other changes I made were to #ifdef away some variable declarations
in the NFS_NOSERVER case so that gcc would stop complaining about
unused variables.
Reviewed by: phk
Submitted by: Bill Paul <wpaul@skynet.ctr.columbia.edu>
All new code is "#ifdef PC98"ed so this should make no difference to
PC/AT (and its clones) users.
Ok'd by: core
Submitted by: FreeBSD(98) development team
It is called from copyin and copyout.
The new routine is conditioned on I586_CPU and I586_FAST_BCOPY, so you
need
options "I586_FAST_BCOPY"
(quotes essenstial) in your kernel config file.
Also, if you have other kernel types configured in your kernel, an
additional check to make sure it is running on a Pentium is inserted.
(It is not clear why it doesn't help on P6s, it may be just that the
Orion chipset doesn't prefetch as efficiently as Tritons and friends.)
Bruce can now hack this away. :)
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
Pointed out by Matt Day <mday@artisoft.com>
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
it assumes all of the data exists in the kernel. Also, fix
sysctl_new-kernel (unused until now) which had reversed operands to
bcopy().
Reviewed by: phk
Poul writes:
... actually the lock/sleep/wakeup cruft shouldn't be needed in the
kernel version I think, but just leave it there for now.
Smart Capture Card is a kind of video capture card, PCMCIA type II,
and made by IBM Japan co.. Unfortunately, it is sold in Japan now.
The device driver is working on the latest pccard-test package by
Tatsumi HOSOKAWA and bsd-nomads. Some applications are also working.
For example, xscc is a video moniter client on X-window, vic-2.7b2 is
a video conference tool.
We have a contract with IBM Japan. From the contract, we cannot release
the source code exept the permit of IBM Japan. But I think they will
permit us in few weeks.
Reviewed by: phk
Requested by: ohashi@mickey.ai.kyutech.ac.jp (Takeshi OHASHI)
code improvements include significant simplification of the reservation
of the swap pager control blocks for reads. Add a panic for an inconsistent
swap pager control block count.
reserving "cached" pages before waking up the pageout daemon. This will reserve
the faulted page, and keep the system from thrashing itself to death given
this condition.
- Log ICMP type during verbose output.
- Added IPFIREWALL_VERBOSE_LIMIT option to prevent denial of service
attacks via syslog flooding.
- Filter based on ICMP type.
- Timestamp chain entries when they are matched.
- Interfaces can now be matched with a wildcard specification (i.e.
will match any interface unit for a given name).
- Prevent the firewall chain from being manipulated when securelevel
is greater than 2.
- Fixed bug that allowed the default policy to be deleted.
- Ability to zero individual accounting entries.
- Remove definitions of old_chk_ptr and old_ctl_ptr when compiling
ipfw as a lkm.
- Remove some redundant code shared between ip_fw_init and ipfw_load.
Closes PRs: 1192, 1219, and 1267.
mode when this occurs and allow the target to complete the transaction.
Force a retry on overruns since they are usually caused by termination or
cable problems.
sometimes already been released at the time pcaclose() is called, but
this is now prevented from deadlocking by checking for a running timer
at the start of pca_wait().
At least, i can now play xboing again with pcaudio, this used to hang
the entire system previously within a few seconds.
is conditionalized by the INCLUDE_CONFIG_FILE option in your kernel config
file and is not turned on by default.
Submitted-By: Bill Pechter <pechter@shell.monmouth.com>
when compiled with -DDIAGNOSTIC. Almost all significant SCO binaries
I've run call an unsupported function and run correctly. Given that
they aren't needed, the messages only clutter up the logfiles and
console.
released until the file system was unmounted. This bug also affected
kern/vfs_syscalls.c but was fixed in rev.1.18 and rev.1.20 there.
Reviewed by: davidg
any statclock ticks. Pretend that all the time up to the first
statclock tick is system time. . This makes a difference mainly for
benchmarks that test short-lived processes - the user and system
times for processes that each lived for about 1ms only added up to
about 10% of the real time even when there was very little interrupt
activity.
Break the printing of a quad_t variable correctly.
alias `pcb_cr3' instead. That is still one alias too many, but is convenient
for me since I've replaced the tss in the pcb by a few scalar variables in
the pcb.
altfmt was abused to sometimes screw up the disassembly of the bytes
following unconditional jump instructions. Gas doesn't pad to a longword
boundary like the comment said - that is the programmer's responsibility.
wdp_fixedcyl) gives it directly. wdp_removedcyl is "reserved" except
in ancient ATA-1 drafts and shouldn't be added. This fixes PR 1288.
Changed some fields and comments in struct wdparams to match a less-
ancient ATA draft.
Fixed bit number for `rdy' in status string.
gcc only inlines memcpy()'s whose count is constant and didn't inline
these. I want memcpy() in the kernel go away so that it's obvious that
it doesn't need to be optimized. Now it is only used for one struct
copy in si.c.