is only used by the icu support modules and by a few drivers that know
too much about the icu (most only use it to convert `n' to `IRQn'). isa.h
is only used by ioconf.c and by a few drivers that know too much about
isa addresses (a few have to, because config is deficient).
with multiple entries as follows:
start address, end address, resident pages in range, private pages
in range, RW/RO, COW or not, (vnode/device/swap/default).
compiler warnings which occur if you don't have 'options DEVFS' in
your kernel config file:
../../kern/kern_descrip.c: In function `fildesc_drvinit':
../../kern/kern_descrip.c:1103: warning: unused variable `fd'
../../kern/kern_descrip.c: At top level:
../../kern/kern_descrip.c:1095: warning: `devfs_token_stdin' defined but not use
d
../../kern/kern_descrip.c:1096: warning: `devfs_token_stdout' defined but not us
ed
../../kern/kern_descrip.c:1097: warning: `devfs_token_stderr' defined but not us
ed
../../kern/kern_descrip.c:1098: warning: `devfs_token_fildesc' defined but not u
sed
to match (pc98/random_machdep.c probably requires a similar change). This
is a problem area for the PC98 merge - all PC98 ifdefs in <machine/*.h> are
kludges to work around incorrect layering.
disklabel(8) to the kernel (dsopen()). Drivers should initialize the
hardware values (rpm, interleave, skews). Drivers currently don't do
this, but it usually doesn't matter since rotational position stuff is
normally disabled.
Original version by John Hay.
Simplified timestamp code by reading the time exactly when necessary.
This may slow down the interrupt handler with extra calls to microtime(),
but only in bad configurations - the input fifo should normally be
disabled if timestamps on input are being used, since otherwise the
timestamp won't be precisely associated with any particular input event.
The interrupt handler remains slowed down by one test and branch for
each input (and now DCD change) event - avoiding this is not practical
yet.
The simplifications also fixed:
- timestamps for input sometimes being clobbered by output and modem
status interrupts.
- valid timestamps not being available unless the port is configured with
vector siointrts. siointrts no longer exists.
- compiler warnings about siointr* in some configurations.
Simplified timestamp and probe code by depending on recent changes in
microtime() and DELAY() to preserve the interrupt enable flag.
enable flag instead of enable_intr() to restore it to its usual state.
getit() is only called from DELAY() so there is no point in optimising
its speed (this wasn't so clear when it was extern), and using
enable_intr() made it inconvenient to call DELAY() from probes that need
to run with interrupts disabled.
instead of sti to it restore to its usual state. pushfl/popfl is
actually faster in protected mode on Pentiums (4+3 cycles instead of 9),
and using sti made it extremely inconvenient to call microtime() from
fast interrupt handlers. pushfl/popfl is a couple of cycles slower than
sti on 486's and a couple more cycles slower on 386's, but the relative
cost of using it is not large since microtime() has to use slow i/o
instructions on the old cpus.
1) Make it much less likely to miss a wakeup in vm_page_free_wakeup
2) Create a new entry point into pmap: pmap_ts_referenced, eliminates
the need to scan the pv lists twice in many cases. Perhaps there
is alot more to do here to work on minimizing pv list manipulation
3) Minor improvements to vm_pageout including the use of pmap_ts_ref.
4) Major changes and code improvement to pmap. This code has had
several serious bugs in page table page manipulation. In order
to simplify the problem, and hopefully solve it for once and all,
page table pages are no longer "managed" with the pv list stuff.
Page table pages are only (mapped and held/wired) or
(free and unused) now. Page table pages are never inactive,
active or cached. These changes have probably fixed the
hold count problems, but if they haven't, then the code is
simpler anyway for future bugfixing.
5) The pmap code has been sorely in need of re-organization, and I
have taken a first (of probably many) steps. Please tell me
if you have any ideas.
1) Remove potential race conditions on waking up in vm_page_free_wakeup
by making sure that it is at splvm().
2) Fix another bug in vm_map_simplify_entry.
3) Be more complete about converting from default to swap pager
when an object grows to be large enough that there can be
a problem with data structure allocation under low memory
conditions.
4) Make some madvise code more efficient.
5) Added some comments.
. use new-style options
. introduce an option OD_AUTO_TURNOFF
. try to use the native geometry as reported by the drive instead of
a faked on -- MOs do have a ``classical'' geometry
. make the scsi_start_unit() actually working
. some cosmetic fixes
Submitted by: akiyama@kme.mei.co.jp (Shunsuke Akiyama)
exit and cleanup. the 'ps' command assumes that there are always 'nproc'
processes on the lists and will walk off the end without checking if not,
causing ddb to trap during the 'ps' command.
parameters to printf() using the "D" format. (Why this even worked on
my box during testing I don't know, but as soon as I powered it on/off
it quite working.)
using the existing files using the existing PCCARD support. Now that
this is in place I would like to fixup the PCCARD hooks and remove the
if_zp driver. At this point, we support everything we used to support
*AND MORE* with the PCCARD code.
Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp> (via the Nomad release)
[ This works on both my 3C589B and 3C589C ]
My 3C509B-COMBO works fine with the following patch. Switching between
UTP and BNC is quite easy. (Just type 'ifconfig ep0 link1 -link2' or 'ifconifg
ep0 link2 -link1'.)
[ I tested this with the additional PC-CARD patches and it works on both
connectors on my 3C589B and 3C589C ]
Reviewed by: nate
Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp>
to PF_ROUTE) from NRL's IPv6 distribution, heavily modified by me for
better source layout, formatting, and textual conventions. I am told
that this code is no longer under active development, but it's a useful
hack for those interested in doing work on network security, key management,
etc. This code has only been tested twice, so it should be considered
highly experimental.
Obtained from: ftp.ripe.net
Poul mentioned that he thought this was some kind of timing problem, and
that started me thinking. After a little poking around, I found that
nfs_timer() was completely disabled when NFS_NOSERVER was #defined.
But after looking at nfs_timer(), it seemed like it was something
required by both the client and server code, and disabling it outright
just didn't seem to make any sense. Parts of it relate only to the
NFS server side code, so I disabled those, but I re-enabled the rest
of the function and made sure that it would be called from nfs_init()
(in nfs_subs.c).
With nfs_timer() re-enabled, everything seems to work again. The only
other changes I made were to #ifdef away some variable declarations
in the NFS_NOSERVER case so that gcc would stop complaining about
unused variables.
Reviewed by: phk
Submitted by: Bill Paul <wpaul@skynet.ctr.columbia.edu>
All new code is "#ifdef PC98"ed so this should make no difference to
PC/AT (and its clones) users.
Ok'd by: core
Submitted by: FreeBSD(98) development team
It is called from copyin and copyout.
The new routine is conditioned on I586_CPU and I586_FAST_BCOPY, so you
need
options "I586_FAST_BCOPY"
(quotes essenstial) in your kernel config file.
Also, if you have other kernel types configured in your kernel, an
additional check to make sure it is running on a Pentium is inserted.
(It is not clear why it doesn't help on P6s, it may be just that the
Orion chipset doesn't prefetch as efficiently as Tritons and friends.)
Bruce can now hack this away. :)
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
Pointed out by Matt Day <mday@artisoft.com>
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
it assumes all of the data exists in the kernel. Also, fix
sysctl_new-kernel (unused until now) which had reversed operands to
bcopy().
Reviewed by: phk
Poul writes:
... actually the lock/sleep/wakeup cruft shouldn't be needed in the
kernel version I think, but just leave it there for now.
Smart Capture Card is a kind of video capture card, PCMCIA type II,
and made by IBM Japan co.. Unfortunately, it is sold in Japan now.
The device driver is working on the latest pccard-test package by
Tatsumi HOSOKAWA and bsd-nomads. Some applications are also working.
For example, xscc is a video moniter client on X-window, vic-2.7b2 is
a video conference tool.
We have a contract with IBM Japan. From the contract, we cannot release
the source code exept the permit of IBM Japan. But I think they will
permit us in few weeks.
Reviewed by: phk
Requested by: ohashi@mickey.ai.kyutech.ac.jp (Takeshi OHASHI)
code improvements include significant simplification of the reservation
of the swap pager control blocks for reads. Add a panic for an inconsistent
swap pager control block count.
reserving "cached" pages before waking up the pageout daemon. This will reserve
the faulted page, and keep the system from thrashing itself to death given
this condition.
- Log ICMP type during verbose output.
- Added IPFIREWALL_VERBOSE_LIMIT option to prevent denial of service
attacks via syslog flooding.
- Filter based on ICMP type.
- Timestamp chain entries when they are matched.
- Interfaces can now be matched with a wildcard specification (i.e.
will match any interface unit for a given name).
- Prevent the firewall chain from being manipulated when securelevel
is greater than 2.
- Fixed bug that allowed the default policy to be deleted.
- Ability to zero individual accounting entries.
- Remove definitions of old_chk_ptr and old_ctl_ptr when compiling
ipfw as a lkm.
- Remove some redundant code shared between ip_fw_init and ipfw_load.
Closes PRs: 1192, 1219, and 1267.
mode when this occurs and allow the target to complete the transaction.
Force a retry on overruns since they are usually caused by termination or
cable problems.
sometimes already been released at the time pcaclose() is called, but
this is now prevented from deadlocking by checking for a running timer
at the start of pca_wait().
At least, i can now play xboing again with pcaudio, this used to hang
the entire system previously within a few seconds.
is conditionalized by the INCLUDE_CONFIG_FILE option in your kernel config
file and is not turned on by default.
Submitted-By: Bill Pechter <pechter@shell.monmouth.com>
when compiled with -DDIAGNOSTIC. Almost all significant SCO binaries
I've run call an unsupported function and run correctly. Given that
they aren't needed, the messages only clutter up the logfiles and
console.
released until the file system was unmounted. This bug also affected
kern/vfs_syscalls.c but was fixed in rev.1.18 and rev.1.20 there.
Reviewed by: davidg
any statclock ticks. Pretend that all the time up to the first
statclock tick is system time. . This makes a difference mainly for
benchmarks that test short-lived processes - the user and system
times for processes that each lived for about 1ms only added up to
about 10% of the real time even when there was very little interrupt
activity.
Break the printing of a quad_t variable correctly.
alias `pcb_cr3' instead. That is still one alias too many, but is convenient
for me since I've replaced the tss in the pcb by a few scalar variables in
the pcb.
altfmt was abused to sometimes screw up the disassembly of the bytes
following unconditional jump instructions. Gas doesn't pad to a longword
boundary like the comment said - that is the programmer's responsibility.
wdp_fixedcyl) gives it directly. wdp_removedcyl is "reserved" except
in ancient ATA-1 drafts and shouldn't be added. This fixes PR 1288.
Changed some fields and comments in struct wdparams to match a less-
ancient ATA draft.
Fixed bit number for `rdy' in status string.
gcc only inlines memcpy()'s whose count is constant and didn't inline
these. I want memcpy() in the kernel go away so that it's obvious that
it doesn't need to be optimized. Now it is only used for one struct
copy in si.c.
gcc only inlines memcpy()'s whose count is constant and didn't inline
these. I want memcpy() in the kernel go away so that it's obvious that
it doesn't need to be optimized. Now it is only used for one struct
copy in si.c.
queue in vm_fault.
Move the PG_BUSY in vm_fault to the correct place.
Remove redundant/unnecessary code in pmap.c.
Properly block on rundown of page table pages, if they are busy.
I think that the VM system is in pretty good shape now, and the following
individuals (among others, in no particular order) have helped with this
recent bunch of bugs, thanks! If I left anyone out, I apologize!
Stephen McKay, Stephen Hocking, Eric J. Chet, Dan O'Brien, James Raynard,
Marc Fournier.
name string. This function should be rewritten to deal with more than
10 units of a given type.
Pointed out by: jmf@free-gate.com (Jean-Marc Frailong)
(I fixed it slightly differently)
name (ie; strip off the domain). Given a hostname 'fooey.bar.com', the
previous code returned a system name of 'fooey.ba', instead of the more
correct 'fooey'. SCO uses 'uname' for many things, including some of
it's socket code so this patch is necessary for running certain legacy
SCO apps. :)
A variant of this code has been running on my box for 2 months now.
some problems with the page-table page management code, since it can't
deal with the notion of page-table pages being paged out or in transit.
Also, clean up some stylistic issues per some suggestions from
Stephen McKay.
circumstances, caused perfectly good connections to be dropped. This
happened for connections over a LAN, where the retransmit timer
calculation TCP_REXMTVAL(tp) returned 0. If sending was blocked by flow
control for long enough, the old code dropped the connection, even
though timely replies were being received for all window probes.
Reviewed by: W. Richard Stevens <rstevens@noao.edu>
code without the B_READ flag being set. This is a problem when the
data is not cached, and the result will be a bogus attempted write.
Submitted by: Kato Takenori <kato@eclogite.eps.nagoya-u.ac.jp>
process during pmap_copy. This minimizes unnecessary swapping or creation of
swap space. If there is a hold_count flaw for page-table
pages, clear the page before freeing it to lessen the chance of a system
crash -- this is a robustness thing only, NOT a fix.
operations don't work with FICTITIOUS pages.) Also, close a window
between PG_MANAGED and pmap_enter that can mess up the accounting of
the managed flag. This problem could likely cause a hold_count error
for page table pages.
close some windows that are opened up by page table allocations. The
prefaulting code no longer uses hold counts, but now uses the busy
flag for synchronization.
before clearing the SELTO interrupt. We used to do this in the past, but
this outb got lost.
Turn ATN on ourselves as appropriate during a parity error instead of relying
on ENAUTOATNP.
Don't use a loop in RESTART_SEQUENCER. Its not necessary.
ansi and traditional cpp.
The nesting rules of macros are different, which required some changes.
Use __CONCAT(x,y) instead of /**/.
Redo some comments to use /* */ rather than "# comment" because the ansi
cpp cares about those, and also cares about quote matching.
cc -c -x assembler-with-cpp -o file.o file.s.
This means that any cpp fatal errors will now be detected, as well as
running *.s files through an ansi cpp instead of a traditional cpp.
(fixes to allow *.s to compile under both ansi and traditional to follow)
queue corruption problems, and to apply Gary Palmer's code cleanups.
David Greenman helped with these problems also. There is still
a hang problem using X in small memory machines.
to be allocated at boot time. This is an expensive option, as they
consume physical ram and are not pageable etc. In certain situations,
this kind of option is quite useful, especially for news servers that
access a large number of directories at random and torture the name cache.
Defining 5000 or 10000 extra vnodes should cut down the amount of vnode
recycling somewhat, which should allow better name and directory caching
etc.
This is a "your mileage may vary" option, with no real indication of
what works best for your machine except trial and error. Too many will
cost you ram that you could otherwise use for disk buffers etc.
This is based on something John Dyson mentioned to me a while ago.
on the baud rate, dont get upset if it's been hung up by setting B0.
Instead, sleep for a short time, as the host controller takes a while
to go through the state changes.
seeing SPIORDY and checking for PHASEMIS. My last change turned out to
be less cosmetic then I thought.
Pointed out by: Satoshi Asami <asami@cs.berkeley.edu>,
Faried Nawaz <fn@pain.csrv.uidaho.edu
NetBSD/OpenBSD support Submitted by:Noriyuki Soda <soda@sra.co.jp>,
Pete Bentley <pete@demon.net>,
Charles M. Hannum <mycroft@mit.edu>,
Theo de Raadt <deraadt@theos.com>
Add a panic for attempts to page in a non paged out SCB.
Re-order some of the interrupt routine for better performance.
NetBSD/OpenBSD support Submitted by:Noriyuki Soda <soda@sra.co.jp>,
Pete Bentley <pete@demon.net>,
Charles M. Hannum <mycroft@mit.edu>,
Theo de Raadt <deraadt@theos.com>
Cosmetic change to p_mesgout code so that it "looks" the same as what
is done in the inb* routines.
NetBSD/OpenBSD support Submitted by:Noriyuki Soda <soda@sra.co.jp>,
Pete Bentley <pete@demon.net>,
Charles M. Hannum <mycroft@mit.edu>,
Theo de Raadt <deraadt@theos.com>
case where blocking can occur, thereby giving other process's a chance
to modify the queue where a page resides. This could cause numerous
process and system failures.
that the datastructures needed to support the swap pager can take
enough space to fully deplete system memory, and cause a deadlock.
This change keeps large objects from being filled with dirty pages
without the appropriate swap pager datastructures. Right now,
default objects greater than 1/4 the size of available system memory
are converted to swap objects, thereby eliminating the risk of deadlock.
phasemiss to sneak by without detection. This should fix the
Wide/Narrow boot problems that have been reported since this bug
caused the driver ignore a narrow target rejecting wide negotiation.
a condition when blocking can occur, and the daemon did not check properly
for a page remaining on the expected queue. Additionally, the inactive
target was being set much too large for small memory machines. It is now
being calculated based upon the amount of user memory available on every
pageout daemon run. Another problem was that if memory was very low, the
pageout daemon could fail repeatedly to traverse the inactive queue.
problem. BY MISTAKE, the vm_page_unqueue (or equiv) was removed from the
vm_fault code. Really bad things appear to happen if a page is on a queue
while it is being faulted.
(returns EPERM always, the errno is specified by POSIX).
If you really have a desperate need to link or unlink a directory, you
can use fsdb. :-)
This should stop any chance of ftpd, rdist, "rm -rf", etc from
bugging out and damaging the filesystem structure or loosing races
with malicious users.
Reviewed by: davidg, bde
Kernel Appletalk protocol support
both CAP and netatalk can make use of this..
still needs some owrk but it seemd the right tiime to commit it
so other can experiment.
guru out there can find a way to take advantage of little-endianness to
make this computation more efficient. (I am certain that it can be done,
but haven't managed to make it work myself.)
unconventionally:
If COMPAT_IPFW is not defined, or if it is defined to 1, enable;
otherwise, disable.
This means that these changes actually have no effect on anyone at the
moment. (It just makes it easier for me to keep my code in sync.)
In the future, the `not defined' part of the hack should be eliminated,
but doing this now would require everyone to change their config files.
The same conditionals need to be made in ip_input.c as well for this to
ave any useful effect, but I'm not ready to do that right now.
call of ahc_scsirate. Otherwise, the proper setting may not get set until
the next reconnection/selection.
The saved_queue used to re-order the QINFIFO during error recovery or
certain SCB paging operations should be an array of u_chars not ints.
saved_queue type error pointed out by: Noriyuki Soda <soda@sra.co.jp>
comparing the PTD pointers, they needed to be masked by PG_FRAME, and
they weren't. Also, the "improved" non-386 code wasn't really an
improvement, so I simplified and fixed the code. This might have
caused some of the panics caused by the VM megacommit.
I spent the better part of a day trying to figure out why my
experiment didn't work the way I expected, only to find out that
the router was dropping huge numbers of packets because of PCI bus
priblems. This does not fix the bug that errors are counted as
input packets because my patch doesn't apply cleanly.
to use the full range of settings from 3.6-20MHz on any target.
Remove all Ultra settings except for the top three that are documented
to work. This fixes some problem reports with the last revision of the
driver since at least the 5.7MHz entry doesn't work in Ultra mode.
With this fix from Stephen, we are getting the target fork performance
that I have been trying to attain: P5-166, before the mega-commit: 700-800usecs,
after: 600usecs, with Stephen's fix: 500usecs!!! Also, this could be the
solution of some strange panic problems...
Reviewed by: dyson@freebsd.org
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
snuck in accidentally from the DARTNet kernel. SIOC*RTINFO were an
extended interface to the stock routing table and SIOCGETVIFINF was
an interface for rsvpd to ask the kernel for the list of multicast vif's.
Pointed-out-by: Brian Reichert <reichert@internet.com>
